Studies of aminolysis of acrylonitrile–divinylbenzene–methyl methacrylate copolymers

Aminolysis of nitrilacrylate–divinylbenzene–methyl methacrylate copolymers by diethylenetriamine is studied under various conditions. The effect of temperature and catalyst concentration on the properties of synthesized anion exchangers depending on the duration of aminolysis is investigated. The conditions for synthesizing anion exchangers with high capacity characteristics are proposed according to the study results.     

Surface tension of liquid high-entropy equiatomic alloys of a Cu–Sn–Bi–In–Pb system

An experimental study of the temperature dependences of the surface tension of liquid high-entropy equiatomic alloys of a Cu–Sn–Bi–In–Pb system is conducted. Measurements are made within the temperature range of t _L to 1300°C in the mode of heating and subsequent cooling of a sample. Overcooling of a melt prior to crystallization is detected. The depth of overcooling grows along with the number of components in the melt, while the temperature coefficient of surface tension falls. The experimental results qualitatively interpreted within the concepts of the specific surface entropy of a liquid.     

Deactivation of a mixed oxide catalyst of Mo–V–Te–Nb–O composition in the reaction of oxidative ethane dehydrogenation

The operational stability of a mixed oxide catalyst of Mo–V–Te–Nb–O composition in the oxidative dehydrogenation of ethane (ratio of C₂H₆: O₂ = 3: 1) is studied in a flow reactor at temperatures of 340–400°C, a pressure of 1 atm, and a WHSV of the feed mixture of 800 h^?1. It is found that the selectivity toward ethylene is 98% at 340°C, but the conversion of ethane at this temperature is only 6%; when the temperature is raised to 400°C, the conversion of ethane is increased to 37%, while the selectivity toward ethylene is reduced to 85%. Using physical and chemical means (XPS, SEM), it is found that the lack of oxidant in the reaction mixture leads to irreversible changes in the catalyst, i.e., reduced selectivity and activity. Raising the reaction temperature to 400°C allows the reduction of tellurium by ethane, from the +6 oxidation state to the zerovalent state, with its subsequent sublimation and the destruction of the catalytically active and selective phase; in its characteristics, the catalyst becomes similar to the Mo–V–Nb–O system containing no tellurium.     

HPIC–UV–ICP–SFMS study of the interaction of cisplatin with guanosine monophosphate

Interaction of cis-[Pt(NH₃)₂Cl₂] (cisplatin) with 5′-guanosine monophosphate (5′-GMP) has been investigated for the first time by on-line coupling of high performance ion chromatography (HPIC) to inductively coupled plasma sector field mass spectrometry (ICP–SFMS). The time-dependent reaction course of the cisplatin-5′-GMP system was followed after incubation under simulated physiological conditions by monitoring the decrease in the concentration of 5′-GMP and the increase in the concentration of formed adducts, on the basis of speciation analysis. Because of the two-step mechanism an intermediate mono adduct was observed together with the major product, the bis adduct cis-[Pt(NH₃)₂(GMP)₂]^2–. The data obtained correlated well with those from earlier studies employing orthogonal techniques such as capillary electrophoresis (CE). Furthermore, HPIC–ICP–SFMS provided unambiguous stoichiometric information about the major GMP-adduct. For this purpose the platinum-to-phosphorus ratio was determined by simultaneously measuring ³¹P and ¹⁹⁵Pt. To separate significant interferences from ¹⁵N¹⁶O⁺, ¹⁴N¹⁶O¹H⁺, ¹²C¹⁸O¹H⁺, and ¹³C¹⁷O¹H⁺ on ³¹P, high-mass resolution (m/Δm = 4500) proved to be mandatory. The P/Pt signal ratio of 2/1 obtained corresponds to the molar ratio in the bis adduct cis-[Pt(NH₃)₂(GMP)₂]^2–.     

Phytochemical characterization of bioactive compounds composition of Rosmarinus eriocalyx by RP–HPLC–ESI–QTOF–MS

Rosmarinus eriocalyx (rosemary or Elyazir) is an endemic species growing in arid steppe and rocky mountain in the South-West Algeria. This plant is well known in Algeria and Morocco due to its medicinal properties. However, little is known about its phytochemical composition. For this purpose, natural antioxidant compounds from R. eriocalyx were recovered by solid-liquid extraction and characterized by reversed-phase high-performance liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry using negative and positive ionization modes. This analytical methodology enabled the characterization of 101 compounds, which were distributed in five major categories namely hydroxycinnamic acid derivatives, hydroxybenzoic acid derivatives, flavonoids, phenolic diterpenes and phenolic triterpenes. Moreover, the studied extract generally showed free radical-scavenging and reductive abilities in the range of butylated hydroxyanisole, butylated hydroxytoluene, α-tocopherol^, and ascorbic acid. Therefore, the result suggests that the aqueous-methanolic extract of R. eriocalyx could serve as a potential source of antioxidants.     

Activity of copper–cerium–zirconium catalysts in oxidation of hydrogen

We have studied the catalytic properties in oxidation of hydrogen for copper–cerium oxide systems deposited on supports obtained by calcination of yttrium-stabilized zirconium dioxide at 300–1000 °C. We have shown that the catalytic activity of the samples obtained depends on the specific surface area of the original supports and the amount of reduced copper within the composition of the catalyst. In samples whose support has high specific surface area, the content of reduced metallic copper is greater and the catalytic activity is higher.     

An effective modification of the Benedict–Webb–Rubin equation of state

A modification of the BWR equation of state is proposed, which is a simplified form of a previously proposed one. It applies to systems formed by hydrocarbons and related compounds, with particular attention to the critical conditions. The range of treatable compounds was extended to a value 0.9 of the acentric factor, corresponding to C₂₀ hydrocarbons. The critical compressibility factor Z_c was made independent of the acentric factor, for a more accurate prediction of pure-component properties (the previous equation did not give the same improvement). Mixing rules require one binary interaction constant for each component pair. Zero binary constants can be used for methane–alkane and alkane–alkane pairs. Examples of applications to pure hydrocarbons and their mixtures are given.     

FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H

The study explored the compatibility between the main product of Portland cement hydration and the main product of the alkali activation of fly ash: C–S–H and N–A–S–H gels, respectively. Both gels were synthesized with laboratory reagents at different pH values. Blends of the two were synthesized as well, using the sol–gel procedure. All the gels were characterized with Fourier transform IR spectroscopy (FTIR). The gels synthesized with this procedure were shown to precipitate together with a silica-rich gel. In addition, the pH level was found to play a determinant role in both C–S–H and N–A–S–H gel synthesis. The C–S–H gel is the major phase formed at pH > 11 and N–A–S–H gel for pH > 12. The results relating to the joint synthesis of the two (C–S–H and N–A–S–H) gels were not conclusive. Technique used for the characterization failed to differentiate between them in the blended material.

MSPD–GC–MS–MS Determination of Residues of 15 Organic Nitrogen-Containing Pesticides in Vegetables

A novel and simple method for determination of 15 organic nitrogen-containing pesticides in vegetables using matrix solid-phase dispersion (MSPD) coupled with gas chromatography tandem mass spectrometry (GC–MS–MS) has been developed. The efficiencies of different sorbents (florisil, silicone, neutral alumina) for the MSPD were compared. Mean recoveries of the method using neutral alumina varied from 73.26 to 111.83% with relative standard deviations of 0.79–15.33% in the concentration range of 0.01, 0.02 and 0.05 mg kg^?1. The limits of detection were typically in the 0.0007–0.0320 mg kg^?1 range, which were 10–100 times lower than the maximum residue levels established by the European Union. This method was applied to residue detection in vegetables, in which organic nitrogen-containing compounds were detected at low concentrations.     

Electrochemical reactivity of Li–Mn–O and Li–Fe–Mn–O spinels

Electrochemical reductive dissolution of Li–Mn–O and Li–Fe–Mn–O spinels and Li⁺ extraction/insertion in these oxides were performed using voltammetry of microparticles. Both electrochemical reactions are sensitive to the Fe/(Fe+Mn) ratio, specific surface area, Li content in tetrahedral positions, and Mn valence, and can be used for electrochemical analysis of the homogeneity of the elemental and phase composition of synthetic samples. The peak potential (E _P) of the reductive dissolution of the Li–Mn–O spinel is directly proportional to the logarithm of the specific surface area. E _P of Li–Fe–Mn–O spinels is mainly controlled by the Fe/(Fe+Mn) ratio. Li⁺ insertion/extraction can be performed with Mn-rich Li–Fe–Mn–O spinels in aqueous solution under an ambient atmosphere and it is sensitive to the regularity of the spinel structure, in particularly to the amount of Li in tetrahedral positions and the Mn valence. Electronic Publication     

Crystal structure of natural Ag–Cu–Pb–Bi sulfide

The crystal structure of a natural sulfide Cu_3,44Ag_0,56Pb₂Bi₆S₁₃ (Сmcm, Z = 4, a = 3.973(1) Å, b = 13.370(2) Å, c = 42.182(7) Å, R = 0.059) is determined. The structure has seven cation positions: two of them (Cu and Ag) are in a tetrahedral environment of sulfur atoms; one (Pb), in a special position (mm2), has a coordination polyhedron in the form of a bicapped trigonal prism; and the other cation positions are surrounded by sulfur atoms forming distorted octahedra. The mirror symmetry plane perpendicular to the c translation causes microtwinning by cutting a layer of trigonal prisms framed by tetrahedron ribbons. These layers are divided by those composed by edge-linked octahedra with a diagonal ribbon of five octahedra (N = 5). The cation and anion positions are ordered by individual sublattices with pseudohexagonal subcells on the m planes perpendicular to the a translation, which concentrate the positions of all the atoms. Supposedly, this natural sulfide is the previously described (1885) yet unconfirmed alaskaite mineral from the lillianite–heyrovskyite homological series and may be isostructural to the ourayite mineral.     

Structural Arrangement of Fe–Sb–O Catalysts

In iron–antimony catalysts containing excess antimony oxide and consisting of a mixture of FeSbO₄ and -Sb₂O₄ phases, the structure of iron antimonate changes compared to the catalyst with an equimolar composition, which is the pure FeSbO₄ phase. In the presence of excess antimony oxide in the near-surface layer of iron antimonate, extended defects with a structure of crystallographic shift are formed. These accumulate overstoichiometric antimony. Such a structural change is associated with changes in the acid–base properties and the surface oxygen binding strength.     

Effect of hydrofluoric acid treatment on the crystallisation behaviour of Zr–Ti–Cu–Al–Ni metallic glass

The surface of the metallic glass Zr₅₉Ti₃Cu₂₀Al₁₀Ni₈ has been modified by hydrofluoric acid (HF) etching treatment. The devitrification and crystallisation process has been mainly studied by isothermal differential scanning calorimetry (DSC), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The nucleation-growth process is the mechanism of crystallisation; nevertheless the JMA-model is not applicable in every situation. Alternative methods are used to interpret the data. Results show the devitrification process is strongly affected by surface nucleation, which depends on the surface topology. Zr₃Al₂ is the first phase formed on the concave areas whereas the quasicrystalline and Zr₂Ni-based phases appears in the flatter ones. Nevertheless, the presence of an oxide surface layer acts upon the surface nucleation and dwarfs the consequences of such topological differences. Moreover, the quasicrystalline formation appears also to be in competition with the parallel formation of ZrO₂ due to thermal re-oxidation during the DSC experiments.     

LC–DAD–ESI-MS–MS Separation and Chemical Characterization of the Inflammatory Fraction of the Roots of Euphorbia kansui

In China the roots of Euphorbia kansui T.N. Liou ex T.P. Wang, known as ‘kansui’, have been used for centuries as a herbal remedy for edema, ascites, and asthma. Kansui, has inflammatory and tumor-promoting toxicity, and other side-effects, however, which have seriously restricted its clinical application. In the work discussed in this paper a simple and rapid LC–DAD–ESI-MS–MS method has been established for separation and characterization of the main compounds in the toxic fraction of E. kansui roots. Twelve diterpene derivatives were identified in the inflammatory fraction of kansui: kansuinine C, kansuinine B, kansuinine A, kansuinine D, 5-O-benzoyl-20-deoxyingenol, kansuinine E, kansuiphorin C, 3-O-benzoyl-20-deoxyingenol, 3-O-(2′E,4′Z-decadienoyl)-5-O-acetylingenol, 3-O-(2′E,4′Z-decadienoyl)-20-deoxyingenol, 20-O-(2′E, 4′E-decadienoyl)ingenol, and 3-O-(2′E,4′Z-decadienoyl)-20-O-acetylingenol. The inflammatory fraction was separated on a C₁₈ reversed-phase column with a mobile phase gradient. The proposed method is a scientific and technical platform enabling the herbal medicine industry to perform quality control and ensure the safety of preparations that contain this class of poisonous diterpenoids.     

Studies of chemical–catalytic formation of Ni–Re (Mo,W)–B alloys

The paper briefly reviews the studies of the processes of formation of Ni–Re–B, Ni–Mo–B, and Ni–W–B triple alloys using the method of chemical–catalytic reduction of metal ions and their properties.     

TG–DSC–FTIR–MS study of gaseous compounds evolved during thermal decomposition of styrene-butadiene rubber

The thermal decomposition behavior of styrene-butadiene rubber was studied using a system equipped with thermogravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy, and mass spectroscopy. Two different experiments were conducted. From these experiments, thermogravimetric analysis results indicated a mass loss of 58 % in the temperature range of ~290–480 °C and a mass loss of 39 % in the temperature range beyond 600 °C. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy confirmed the presence of oxides, even at 1,000 °C, accounting for the Zn, Mg, Al, Si, and Ca in the original sample.     

Electrochemical determination of the surface composition of Pd–Pt core–shell nanoparticles

Different amounts of Pt atoms were deposited onto the surface of Pd nanoparticles supported on carbon black by hydroquinone reduction method in anhydrous ethanol. Here, we surveyed electrochemical probing of surface compositions of Pd–Pt surface alloys. They were calculated from hydrogen desorption, carbon monoxide adlayer oxidation, and reduced carbon dioxide oxidation charges. The surface composition of Pt drastically increased up to Pt[0.3]/Pd/C (23.1 at.% of Pt) and then approached that of pure Pt with the moderate rate of increase.     

On hydrolysis of Ba–Bi–O and K–Ba–Bi–O oxide systems

Fundamentally different behavior of Ba–Bi–O (Ba : Bi = 11 : 4, 1 : 1, 2: 3, and 1 : 5 mol/mol) and K_nBa_mBi_m+nO_y (m = n = 1, 2,...; exhibiting superconducting properties with T_c = 28–32 K) oxides and BaO₂ in hydrolysis reactions has been revealed by means of potentiometry and chemical analysis. Products of the oxides treatment with water do not contain H₂O₂, evidencing the absence of peroxide ions in their structure. The perovskite-type barium-bismuth(III) oxides are completely hydrolyzed into Ba(OH)₂ and Bi₂O₃ at room temperature.     

Microstructural properties of sintered Al–Cu–Mg–Sn alloys

A non-commercial Al4Cu0.5Mg alloy has been used for investigating the effects of the elemental Sn additions. Uniaxial die compaction response of the alloys in terms of green density was examined, and the results showed that Sn addition has no effect when compacting conducted under high pressures. In total, 93–95% green density was achieved with an applied pressure of 400 MPa. Thermal events occurring during the sintering of the emerging alloys were studied by using differential scanning calorimetry (DSC). First thermal event on the DSC analysis of the Al4Cu0.5Mg1Sn alloy is the melting of elemental Sn, whereas for Al4Cu0.5Mg alloy, it is the formation of Al–Mg liquid nearly at 450 °C. Also it is clearly seen on the DSC analysis that Sn addition led to an increase in the formation enthalpy of Al–Mg liquid phase. High Sn content and high sintering temperature (620 °C), therefore high liquid-phase content, caused decrease on the mechanical properties due to thick intergranular phases and grain coarsening. Highest transverse rupture strength and hardness values were obtained from Al4Cu0.5Mg0.1Sn alloy sintered at 600 °C and measured as 390 MPa and 73 HB, respectively.