Effect of surfactant phase transition on the inclusion behaviour of an amphiphilised porphyrin derivative

The macroscopic morphology of a micelle biomembrane model strongly affects the aggregation state of an included porphyrin derivative.     

Hydrogen-bond-assisted control of H versus J aggregation mode of porphyrins stacks in an organogel system

To obtain insights into a correlation relationship between the structure and the aggregation mode in an organogel system, we synthesized gelators 2a-4a bearing a porphyrin moiety as a one-dimensional aggregation unit and amide groups as peripheral hydrogen-bonding sites. Gelators 3a and 3b bearing the amide groups at the 4-position of the meso-phenyl groups are classified as versatile gelators, gelating 10 and 14 solvents, respectively, among 23 solvents tested herein. In contrast, gelators 2a and 4a bearing the amide groups at the 3,5-positions and 3-position, respectively, are classified as poor gelators. Examination by spectroscopic methods (UV-vis, ATR-FTIR, XRD, etc.) revealed that in the organogel phase porphyrins in 3a adopt the H aggregation mode whereas those in 2a and 4a adopt the J aggregation mode. X-ray analysis of the single crystals established that in fact 3b features a columnar stack of porphyrin moieties that can be classified as the H-aggregate, whereas 2a results in a two-dimensional a-b plane, in which porphyrin moieties are arranged in the J-aggregate. Very interestingly, the difference in the H versus J aggregation mode is well-reflected by the difference in the macroscopic aggregate morphology observed by SEM: 3a + cyclohexane gel results in a one-dimensionally aggregated fibrillar structure, whereas 2a + cyclohexane gel results in a two-dimensional sheetlike structure. These findings indicate that the H versus J aggregation mode of porphyrin stacks can be controlled by the peripheral hydrogen-bonding interactions and the microscopic hydrogen-bonding network structure is well-reflected by the macroscopic SEM-observed structure.     

Spectroscopic, morphological, and mechanistic investigation of the solvent-promoted aggregation of porphyrins modified in meso-positions by glucosylated steroids

Solvent-driven aggregation of a series of porphyrin derivatives was studied by UV/Vis and circular dichroism spectroscopy. The porphyrins are characterised by the presence in the meso positions of steroidal moieties further conjugated with glucosyl groups. The presence of these groups makes the investigated macrocycles amphiphilic and soluble in aqueous solvent, namely, dimethyl acetamide/water. Aggregation of the macrocycles is triggered by a change in bulk solvent composition leading to formation of large architectures that express supramolecular chirality, steered by the presence of the stereogenic centres on the periphery of the macrocycles. The aggregation behaviour and chiroptical features of the aggregates are strongly dependent on the number of moieties decorating the periphery of the porphyrin framework. In particular, experimental evidence indicates that the structure of the steroid linker dictates the overall chirality of the supramolecular architectures. Moreover, the porphyrin concentration strongly affects the aggregation mechanism and the CD intensities of the spectra. Notably, AFM investigations reveal strong differences in aggregate morphology that are dependent on the nature of the appended functional groups, and closely in line with the changes in aggregation mechanism. The suprastructures formed at lower concentration show a network of long fibrous structures spanning over tens of micrometres, whereas the aggregates formed at higher concentration have smaller rod-shaped structures that can be recognised as the result of coalescence of smaller globular structures. The fully steroid substituted derivative forms globular structures over the whole concentration range explored. Finally, a rationale for the aggregation phenomena was given by semiempirical calculations at the PM6 level.     

Investigation of Morphology-Controlled Ultrafast Relaxation Processes of Aggregated Porphyrin

Here, we have synthesized rod and flake shaped morphology of porphyrin aggregates from 5, 10, 15, 20-tetra (4-n-octyloxyphenyl) porphyrin (4-opTPP) molecule which are evident from scanning electron microscopy (SEM). The formation of J-type aggregation is evident from steady state and time-resolved fluorescence spectroscopic studies. Ultrafast transient absorption spectroscopic studies reveal that the excited state lifetime is controlled by the morphology and the time constant for S₁→S₀ relaxation changes from 3.05 ps to 744 ps with changing the shape from rod to flake, respectively. In spite of similar exciton coupling energy in both the aggregates, the flake shaped aggregates undergo a faster exciton relaxation process and the non-radiative relaxation channels are found to depend on the shape of aggregates. The fundamental understanding of morphology controlled ultrafast relaxation processes of aggregated porphyrin is important for designing efficient light harvesting devices.     

Association behavior of porphyrin pendants in pH-sensitive water-soluble polymer

A novel tripyridylporphyrin monomer,5-[4-[2-(acryloyloxy)ethoxy]phenyl]-10,15,20-tris(4-pyridyl)porphyrin (TrPyP),was synthesized and polymerized with acrylamide(AM) to prepare the hydrophobically associating water-soluble polymer PAM-TrPyP.The aggregation behavior of porphyrin pendants was investigated by UV-Visible and fluorescence spectra.The polymer displays a strong tendency of hydrophobic association even in dilute solutions.With increasing the concentration,the maximum absorption wavelength of Soret band changes from 416 nm to 407 nm,and the fluorescence corrected for the inner filter effect exhibits moderate concentration quenching.All the results indicate thatπ-πinteraction of porphyrin pendants plays a key role in association of PAM-TrPyP,and H-aggregates of porphyrins are mainly formed in the concentrated solution.On the other hand,dynamic light scattering(DLS) and transmission electron microscopy(TEM) were used to follow the changes in size and structure of the macromolecular assemblies with the concentration increase.The polymer aggregation conformation changes from loose "vesicle-like" morphology to solid globule accordingly.When pH value of solution decreases to 4.3,pyridine moieties on porphyrin pendants could be protonated and the H-aggregates formed in macromolecular matrix are destroyed by electrostatic repulsion interactions.     

Kinetic investigation of porphyrin interaction with chiral templates reveals unexpected features of the induction and self-propagation mechanism of chiral memory

Kinetics of the porphyrin aggregation leading to a chiral memory system shows a remarkable "catalytic" effect of the noncovalent templates explaining their self-replication ability.     

Sequence and linker dependent chiral dimerization of DNA–porphyrin conjugates

Circular dichroism (CD), UV–vis absorption, fluorescence, and resonance light scattering (RLS) spectroscopies were used to elucidate the role of the DNA sequence, linkers between DNA and porphyrin, and metal in the porphyrin coordination center on the self-assembly of DNA–porphyrin conjugates. A series of eight non-self-complementary DNA–porphyrin conjugates have been synthesized with zinc and free-base porphyrins covalently attached to the short ODNs (A₈ or T₈) via amide or phosphate linker. A small structural modification (e.g., amide linker replaced by the phosphate linker) showed a dramatic effect on the aggregation properties of DNA–porphyrin conjugates and greatly altered their spectroscopic properties. At low ionic strength, porphyrin aggregation was not observed for any conjugate. An increase in the ionic strength caused two out of eight conjugates to form chiral porphyrin dimers.     

Novel methodology to control the adsorption structure of cationic porphyrins on the clay surface using the "size-matching rule"

Saponite-type clays that have different cation exchange capacities were successfully synthesized by hydrothermal synthesis. The structure and properties were analyzed by X-ray diffraction, X-ray fluorescence, (27)Al NMR, FT-IR, thermogravimetric and differential thermal analysis, atomic force microscopy, and cation exchange capacity measurement. The intercharge distances on the synthetic saponite (SS) surfaces were calculated to be 0.8-1.9 nm on the basis of a hexagonal array. The complex formation behavior between SS and cationic porphyrins was examined. It turns out that the average intermolecular distance between porphyrin molecules on the SS surface can be controlled, depending on the charge density of the SS. In the case of tetrakis(1-methylpyridinium-4-yl)porphyrin (H(2)TMPyP(4+)), the average intermolecular distances on the SS surface can be controlled from 2.3 to 3.0 nm on the basis of a hexagonal array. It was also found that absorption maxima of porphyrins depend on the charge density of the SS. The adsorption behavior of porphyrin on the SS surface can be rationally understood by the previously reported "size-matching rule". This methodology using host-guest interaction can realize a unique adsorption structure control of the porphyrin molecule on the SS surface, where the gap distance between guest porphyrin molecules is rather large. These findings will be highly valuable to construct photochemical reaction systems such as energy transfer in the complexes.     

Effects of different light irradiations on structure and optical properties of methoxy-substituted tetraphenylporphyrins

UV lamp, filtered halogen lamp (at 425 nm) and Green laser (532 nm) experiments on a series of meso-substituted tetra phenyl porphyrin, TPP, bearing methoxy peripheral groups together with a metal derivate of 3,4 dimethoxy TPP were lead to different protonation and aggregation structures. Properties of irradiated porphyrins were investigated using their absorption and emission spectra in dichloromethane solution. The results show that the optical properties of the TPP derivates depend on light irradiation source, which shows the tuning of the absorption and emission spectra of the TPP derivates. From the dynamic light scattering measurements, the size distribution of samples was estimated about 5–15 nm in solvent after irradiation. Atomic force microscopy images of deposited porphyrins on the glass surface were shown average particle size between 10 and 30 nm. Particularly, self-assembly of the porphyrin derivates was also observed when green laser was used. We suggest that the irradiation source plays an important role in the controlling of size and morphology of products, and we propose a self-organization model to explain the formation of the porphyrin nanostructures.     

四吡啶基卟啉质子化结构变化的理论研究

为考察m-吡啶基对质子化卟啉结构的影响,用半经验的AM1MO方法,并进行合理的对称性限制,计算了一类重要的卟啉衍生物---四吡啶基卟啉(TPyPH~2)及其质子化二酸(TP~yPH~4^2^+)的构型。通过结构分析,电荷布居分析和前沿轨道分析,讨论了质子化过程中的构型变化以及这种变化对分子堆积可能带来的影响。     

Probing the donor-acceptor proximity on the physicochemical properties of porphyrin-fullerene dyads: "tail-on" and "tail-off" binding approach.

A new approach of probing proximity effects in porphyrin-fullerene dyads by using an axial ligand coordination controlled "tail-on" and "tail-off" binding mechanism is reported. In the newly synthesized porphyrin-fullerene dyads for this purpose, the donor-acceptor proximity is controlled either by temperature variation or by an axial ligand replacement method. In o-dichlorobenzene, 0.1 M (TBA)ClO(4), the synthesized zincporphyrin-fullerene dyads exhibit seven one-electron reversible redox reactions within the accessible potential window of the solvent and the measured electrochemical redox potentials and UV-visible absorption spectra reveal little or no ground-state interactions between the C(60) spheroid and porphyrin pi-system. The proximity effects on the photoinduced charge separation and charge recombination are probed by both steady-state and time-resolved fluorescence techniques. It is observed that in the "tail-off" form the charge-separation efficiency changes to some extent in comparison with the results obtained for the "tail-on" form, suggesting the presence of some through-space interactions between the singlet excited zinc porphyrin and the C(60) moiety in the "tail-off" form. The charge separation rates and efficiencies are evaluated from the fluorescence lifetime studies. The charge separation via the singlet excited states of zinc porphyrin in the studied dyads is also confirmed by the quick rise-decay of the anion radical of the C(60) moiety within 20 ns. Furthermore, a long-lived ion pair with lifetime of about 1000 ns is also observed in the investigated zinc porphyrin-C(60) dyads.     

Spectroscopic Studies of water-soluble porphyrins with protein encapsulated in bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles: aggregation versus complexation

We have investigated the interaction of two water-soluble free-base porphyrins (negatively charged meso-tetrakis(p-sulfonatophenyl)porphyrin sodium salt (TSPP) and positively charged meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMpyP)) with two drug-carrier proteins (human serum albumin (HSA) and beta-lactoglobulin (betaLG)) in bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane/water reverse micelles (RM) by using steady-state and transient-state fluorescence spectroscopy. TSPP exhibited a complex pattern of aggregation on varying the RM size and pH in the absence of the protein: at low omega0 (the ratio of water concentration to AOT concentration, the emission of H-aggregates prevails under acidic or neutral "pH(ext)" conditions. Upon formation of the water-pool, J-aggregates and monomeric diacid species dominate at low "pH(ext)" but only monomer is detected at neutral "pH(ext)". The aggregation number increases with omega0 and the presence of the protein does not seem to contribute to further growth of the aggregate. The presence of protein leads to H-deaggregation but promotes J-aggregation up to a certain protein/porphyrin ratio above which, complexation with the monomer bound to a hydrophobic site of the protein prevails. The effective complex binding constants are smaller than in free aqueous solution; this indicates a weaker binding in these RM probably due to some conformational changes imposed by encapsulation. Only a weak quenching of TMpyP fluorescence is detected due to the presence of protein in contrast to the negative porphyrin.     

Spectroscopic investigations of metalloporphyrin-oligopeptide systems: evidence for peptide aggregation

Anionic pentapeptides consisting of a string of four glutamic acid residues terminated by either tyrosine (Glu4Tyr) or tryptophan (Glu4Trp) were synthesized, and their aggregation properties in buffered (pH = 7.0) aqueous solutions were investigated using two different approaches. In the first approach, the effects of the concentration of peptide used as its own probe (intrinsic probe) on its fluorescence emission, circular dichroism, surface tension, and solution pH yielded similar critical peptide concentrations of around 175 microM. This particular concentration was taken as evidence for peptide aggregation. In the second approach, peptide aggregation was investigated using cationic metalloporphyrins, tetrakis(N-methyl-4-pyridyl)porphyrin (Pd(II)TMPyP(4+) and Zn(II)TMPyP(4+)), as extrinsic probes. The effect of peptide concentration on porphyrin ground-state absorption confirmed peptide aggregation, but at a lower critical peptide concentration near 125 microM. This difference was attributed to the possible distortion introduced by the association of one (or more) large metalloporphyrin molecule with the peptide aggregates. Evidence for peptide aggregation was also demonstrated from the effect of peptide concentration on Pd(II)TMPyP(4+) triplet-state decay. The fast component (k(f), associated with electron transfer from the target Tyr and Trp residues to the porphyrin triplet state) was found to be independent of peptide concentration, implying no noticeable effect of peptide aggregation on the electron-transfer event. This was attributed to the fact that species formed by excitation of porphyrin associated with ion-pair complexes or bound to peptide aggregates and the diffusion together of the separate T(1) and peptide entities in the bulk phase are kinetically similar. On the other hand, the slower component (k(s)) of the decay, which is associated with the diffuse formation of an encounter complex between the free peptide and T(1) porphyrin (bulk phase), was peptide-dependent and displayed a critical peptide concentration near 125 microM, above which it became practically independent of peptide concentration. This invariance of k(s) was taken as an indication that the free peptide concentration in the bulk phase remains constant above 125 microM, the concentration at which peptide molecules prefer to associate as aggregates.     

Tert-butyl-substituted tripyrranes: insights into the steric and conformational factors that influence porphyrinoid ring formation in the "3 + 1" methodology

The MacDonald "3 + 1" route for porphyrinoid synthesis involves the acid-catalyzed condensation of tripyrranes with monocyclic dialdehydes, followed by an oxidation step. In the present study, yields were found to be greatly diminished when tert-butyl substituents were introduced on to the tripyrrane unit. Analysis of the proton NMR spectra for the tripyrranes indicates that the preferred conformation in solution has been radically altered by the presence of these tert-butyl moieties. This appears to be the first time that the NMR properties of an intermediate in porphyrin or porphyrin analogue synthesis have been correlated to its effectiveness in macrocycle formation.     

Organo-soluble porphyrin mixed monolayer-protected gold nanorods with intercalated fullerenes

Organo-soluble porphyrin mixed monolayer-protected gold nanorods were synthesized and characterized. The resulting gold nanorods encapsulated by both porphyrin thiol and alkyl thiol on their entire surface with strong covalent Au-S linkages were very stable in organic solvents without aggregation or decomposition and exhibited unique optical properties different from their corresponding spherical ones. Alkyl thiol acts as a stabilizer not only to fill up the potential space on gold nanorod surface between bulky porphyrin molecules but also to provide space for further insertion of C(60) molecules forming a stable C(60)-porphyrin-gold nanorod hybrid nanostructure.     

On the dynamics of the TPPS4 aggregation in aqueous solutions: successive formation of H and J aggregates

The dynamics of aggregation of meso-tetrakis (p-sulfonatofenyl) porphyrin (TPPS4) in function of its concentration, pH and ionic strength was studied by optical absorption, fluorescence and resonance light scattering (RLS) techniques. In the region of pH, where TPPS4 exists in biprotonated form, the addition of NaCl induces the TPPS4 aggregation due to the formation of the "cloud" of counter ions around the TPPS4 molecule thus reducing electrostatic repulsion between the porphyrin molecules. The formation of this "cloud" shifts the pKa value to acid region (from 5.0 in the absence of salt to 4.5 at [NaCl] = 0.4 M), reduces the TPPS4 absorption in all spectral range and quantum yield and lifetime of fluorescence (from 0.27 to 0.17 and from 4.00+/-0.04 to 3.00+/-0.03 ns in the absence of salt and in the presence of NaCl, respectively). The aggregation process involves two successive stages: initially H aggregates are formed, which in time are transformed in J ones. The existence of these two stages was confirmed by the fluorescence and RLS data. The kinetics of the formation of J aggregates is characterized by the induction time t1 and the average growth time t2, which depend on both TPPS4 and salt concentrations. The induction period t1 appears as a result of initial formation of H aggregates and their successive transformation in J ones. At very high TPPS4 concentrations, the J aggregates are united in more complex structures such as hollow cylinders or helixes.     

Properties of polyethylene glycol supported tetraarylporphyrin in aqueous solution and its interaction with liposomal membranes

5,10,15,20-Tetrakis(4-hydroxyphenyl)porphyrin was functionalized by covalent attachment of poly(ethylene glycol) (PEG) chains of various molecular weights, 350, 2000, and 5000 Da. The properties of PEG-functionalized tetraarylporphyrins in aqueous solution and their interactions with liposomes have been studied. Electronic absorption spectroscopy, dynamic light scattering, atomic force microscopy, and fluorescence quenching were used to monitor aggregation of porphyrin chromophores and behavior of the attached PEG chains in the aqueous solution. The tendency for aggregation of porphyrin chromophores in aqueous solution and the efficiency of fluorescence quenching by KI decrease with increasing length of PEG chain linked to the porphyrin ring. The experimental results indicate that polymer clusters are present in aqueous solution of all pegylated porphyrins. The interactions between the pegylated porphyrins and phosphatidylcholine liposomes in the aqueous solution were studied using the fluorescence methods. The apparent binding constants of porphyrin chromophores to liposomes were determined. The degree of binding was found to be dependent on the molecular weight of the attached polymer.     

Femtosecond fluorescence dynamics of porphyrin in solution and solid films: the effects of aggregation and interfacial electron transfer between porphyrin and TiO2

The excited-state relaxation dynamics of a synthetic porphyrin, ZnCAPEBPP, in solution, coated on a glass substrate as solid films, mixed with PMMA and coated on a glass substrate as solid films, and sensitized on nanocrystalline TiO2 films were investigated by using femtosecond fluorescence up-conversion spectroscopy with excitation in the Soret band, S2. We found that the S2--> S1 electronic relaxation of ZnCAPEBPP in solution and on PMMA films occurs in 910 and 690 fs, respectively, but it becomes extremely rapid, <100 fs, in solid films and TiO2 films due to formation of porphyrin aggregates. When probed in the S1 state of porphyrin, the fluorescence transients of the solid films show a biphasic kinetic feature with the rapid and slow components decaying in 1.9-2.4 and 19-26 ps, respectively. The transients in ZnCAPEBPP/TiO2 films also feature two relaxation processes but they occur on different time scales, 100-300 fs and 0.8-4.1 ps, and contain a small offset. According to the variation of relaxation period as a function of molecular density on a TiO2 surface, we assigned the femtosecond component of the TiO2 films as due to indirect interfacial electron transfer through a phenylethynyl bridge attached to one of four meso positions of the porphyrin ring, and the picosecond component arising from intermolecular energy transfer among porphyrins. The observed variation of aggregate-induced relaxation periods between solid and TiO2 films is due mainly to aggregation of two types: J-type aggregation is dominant in the former case whereas H-type aggregation prevails in the latter case.     

Porphyrins with exocyclic rings. 15.(1) synthesis of quino- and isoquinoporphyrins, aza analogues of the naphthoporphyrins

Porphyrins with fused isoquinoline and quinoline units have been prepared by the "3 + 1" methodology. 5-Nitroisoquinoline and 6-nitroquinoline condensed with ethyl isocyanoacetate in the presence of a phosphazene base to give isoquino- and quinopyrroles, respectively. Ester saponification and decarboxylation with KOH in ethylene glycol at 190 degrees C gave the parent azatricycles, and these were further condensed with 2 equiv of an acetoxymethylpyrrole to give the corresponding tripyrranes protected at the terminal positions as their tert-butyl esters. In a one-pot procedure, the ester protective groups were cleaved with TFA, and following dilution with dichloromethane, "3 + 1" condensation with a pyrrole dialdehyde and dehydrogenation of the phlorin intermediate with DDQ gave the targeted azanaphthoporphyrins in excellent yields. Although the UV-vis spectra of these new porphyrin systems are unexceptional, they show promise for further functionalization and applications in the development of porphyrin arrays. In addition, a zinc chelate of the isoquinoporphyrin system shows a high degree of regioselective intermolecular interaction/aggregation in chloroform solution that may lead to selectivity in molecular recognition studies.     

Self-aggregation inhibits the photonuclease activity of porphyrins

A series of tentacle porphyrins having four aminoalkyl groups at the periphery was synthesized, and the DNA binding properties were investigated by absorption and circular dichroism (CD) spectroscopic methods. The aminopropyl chain was found to facilitate binding, and bisignate induced CD spectra revealed that the porphyrins are self-stacked on the DNA surface. The photonuclease activity of the tentacle porphyrins was also studied, and the aminopropylporphyrin showed the highest activity. The activity increased in proportion to the porphyrin load, but higher loads resulted in the decrease of activity. This inhibitory step corresponded to aggregation of the porphyrin. Thus, the aggregation was suggested to shield the inner porphyrin from the solvent, the production of active oxygen species being suppressed.