Enantioseparation of Chiral Alcohols on Aceilulose Derivative Immobilized onto Spherical Mesoporous SBA-15 by High Performance Liquid Chromatography

在强酸性条件下,以三嵌段聚醚P123为模板,合成了孔径大且粒径均匀的SBA-15介孔二氧化硅微球.将含有少量三乙氧硅丙基氨基甲酸酯残基的纤维素-三(3,5-二甲基苯基氨基甲酸酯)通过分子间缩聚作用固载到氨丙基化的SBA-15微球上,制得手性固定相;采用常规和非常规的流动相模式,对一些芳香醇的消旋体进行了手性拆分.实验结果表明,所制备的SBA-15微球不仅分散性良好,具有规则的二维六方孔道结构,而且消除了微孔;所制备的键合手性固定相不仅固载手性选择剂的量大,而且经六甲基二硅胺烷封端后可有效改善拖尾现象,对实验选用的手性醇具有较高的拆分能力;与大孔硅胶为基质的同类纤维素键合手性固定相相比,该固定相对同种手性消旋体的分离因子明显提高.     

高效液相色谱的4种商品手性柱对38种手性化合物的拆分研究

采用纤维素-三(3,5-二甲基苯基氨基甲酸酯)涂敷型手性固定相(Chiralcel OD柱)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)涂敷型手性固定相(Chiralpak AD柱)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)键合型手性固定相(Chiralpak IA柱)和Pirkle型的(S,S)-Whelk-01手性固定相对38种外消旋体化合物进行手性拆分。实验结果表明,4种固定相的手性识别能力为:OD>AD>IA>(S,S)-Whelk-01,OD固定相的手性识别率达到60%,并且它们之间的手性识别性能还具有一定的互补性。本研究对4种常用手性固定相的拆分能力进行了对比,为拆分手性化合物时有的放矢地选择手性固定相提供了参考。     

几种手性化合物在纤维素衍生物涂敷的SBA-15手性固定相上的直接拆分

以三嵌段聚醚P123为模板，四乙氧基硅烷为前驱体，在强酸性条件下合成了高比表面积、大孔径、微米级的球形SBA-15．将纤维素-三（3，5-二甲基苯基氨基甲酸酯）（CDMPC）涂敷在氨丙基化的SBA-15微球上，作为手性固定相，在正相条件下直接拆分了七种不同类型的手性化合物．实验发现，与同样尺寸的CDMPC涂敷的氨丙基硅...     

一种手性中间体在键合型和涂覆型纤维素手性固定相上的拆分

制备了涂覆型和键合型纤维素-(3, 5-二甲基苯基氨基甲酸酯)固定相, 分别在制备的纤维素手性固定相上成功地拆分了一种手性中间体, 通过考察流动相中的改性剂(醇、四氢呋喃、三氯甲烷)对手性拆分的影响, 优化了手性中间体在两种手性固定相上的色谱分离条件, 并比较了手性中间体在涂覆和键合型纤维素手性固定相上的拆分. 结果表明, 涂覆型和键合型手性固定相对这种手性中间体均有较好的拆分效果, 在150 mm的色谱柱上, 这两种手性固定相对这种手性中间体的拆分能力相差不大, 但键合型固定相上可选择的流动相范围更广.     

高效液相色谱手性固定相法直接拆分外消旋雷诺嗪

在反相以及正相争件下，利用自制的涂敷型纤维素-三（3，5-二甲基苯基氨基甲酸酯）手性固定相直接拆分了外消旋雷诺嗪，并考察了不同流动相对手性拆分的影响，特别是醇类物质对拆分影响。结果表明，醇的立体结构、极性对雷诺嗪的手性拆分均有影响。实验结果显示无论在正相条件下还是在反相条件下，涂敷型纤维素-三（3，5-二甲基苯基氨基甲酸酯）手性固定相均可以很好的拆分外消旋体雷诺嗪。     

键合型纤维素-苯基氨基甲酸酯手性固定相的制备及用于对映异构体拆分

采用化学键合法,利用4,4′-二苯基甲基二异氰酸酯作间隔臂,通过纤维素葡萄糖单元上2、3或6-位上的羟基将纤维素衍生物键合在氨丙基硅胶上,制备了键合型纤维素-苯基氨基甲酸酯手性固定相.同时,以微晶纤维素和苯基异氰酸酯为原料,合成了纤维素-三苯基氨基甲酸酯,并以未修饰的硅胶为载体,制备了涂敷型纤维素-三苯基氨基甲酸酯手性固定相.分别对键合型和涂敷型两类手性固定相进行了表征,并首次在纤维素-苯基氨基甲酸酯手性柱上拆分了安息香.     

纤维素-三(3,5-二甲基苯基氨基甲酸酯)涂敷氧化锆手性固定相拆分外消旋硒代缩水甘油醚

用油乳液-溶胶-凝胶法制备纯单斜相结晶氧化锆微米球,其表面积为16．7m^2／g,孔直径为15．8nm,孔体积为0．02cm^3／g,平均粒径5μm。用此氧化锆微球涂敷了纤维素-三(3,5-二甲基苯基氨基甲酸酯)-ZrO2手性固定相,正相条件下直接拆分了3种单硒代缩水甘油醚对映体,考察了流动相极性对样品保留和拆分的影响。     

正反相模式下键合纤维素手性固定相对手性化合物的拆分

在自行合成的键合型纤维素-(3,5-二甲基苯基氨基甲酸酯)(CDMPC-CSP)手性固定相上,在正相模式下对苯偶姻和甲霜灵外消旋体进行了拆分,考察了流动相中醇以及温度在手性识别中对手性分离的影响。同时考察了反相模式下外消旋体的拆分。     

新型键合型纤维素类手性固定相的制备及安息香分离

采用六亚甲基二异氰酸酯作为键合试剂,制备了键合型纤维素3,5-二甲基苯基氨基甲酸酯手性固定相。分别往正己烷/乙醇或正己烷/异丙醇中添加四氢呋喃和二氯甲烷,系统地考察了四氢呋喃和二氯甲烷的含量对安息香外消旋体拆分的影响。实验结果表明,安息香两对映体的容量因子随二者含量的增加而降低,但分离效果变化不大,分离因子均在1.2以上。所制备的CSP在采用含有高浓度四氢呋喃(23%)、二氯甲烷的流动相进行手性分离时仍具有良好的稳定性。与涂敷型固定相相比,流动相选择范围更广。     

两种β-环糊精单臂键合固定相液相色谱法拆分三唑类手性农药

以有序介孔材料SBA-15为基质,β-环糊精和氨基β-环糊精为配体,通过环糊精端口的羟基和氨基与3-异氰酸丙基三乙氧基硅烷偶联剂上活泼的异氰酸酯基之间的加成反应,制备了2种不同单键合臂的β-环糊精修饰SBA-15手性固定相(CDSP和NCDSP),它们分别含有稳定的氨基甲酸酯基和脲基键合臂.在反相高效液相色谱模式下,以灭菌唑、烯唑醇、己唑醇和戊唑醇等10种常见的三唑类手性农药为探针,考察了CDSP和NCDSP的基本手性色谱性能.研究结果表明,2种新固定相对三唑类农药对映体均有较好的快速拆分能力,所需分离时间较短(30 min),其中灭菌唑和烯唑醇的选择性因子(α)分别为1.29和1.28,分离度分别达到3.84和3.23.采用甲醇、乙腈和水组成的简单流动相,室温下在CDSP和NCDSP上分别拆分了9种和8种三唑类手性农药对映体.研究发现拥有适当大小和手性碳连接羟基的三唑类农药在上述2种新固定相上有较好的拆分效果,说明固定相上的环糊精配体对溶质的包结、氢键和空间位阻等协同作用对空间手性识别有重要贡献.不同批次CDSP和NCDSP的键合量分别为0.139~0.156和0.120~0.137μmol/m2,表明2种固定相的制备方法有较好的重现性.与涂覆型纤维素商品柱相比,新的脲基环糊精固定相性能更稳定,反相色谱实用性更强,且制备方法简便,成本较低,在三唑类手性农药对映体残留量检测中具有良好的应用前景.     

Preparation and chiral recognition in HPLC of cellulose 3,5-dichlorophenylcarbamates immobilized onto silica gel

The 3,5-dichlorophenylcarbamates (2) of cellulose bearing a small amount of 3-(triethoxysilyl)propyl residues were synthesized by a one-pot process and immobilized onto a silica gel through intermolecular polycondensation of the triethoxysilyl groups. The obtained cellulose derivatives were characterized by (1) H NMR and elemental analysis (EA), and their recognition abilities were evaluated by high-performance liquid chromatography (HPLC). The cellulose derivatives containing about 1-5% of the 3-(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition ability. The immobilized chiral packing materials (CPMs) could be used with the eluents containing chloroform and tetrahydrofuran (THF), which cannot be used with the conventional coated-type chiral packing materials. By using these eluents, the chiral recognition for many racemates was improved.     

Immobilization of cellulose phenylcarbamate onto silica gel via in termolecular polycondensation of triethoxysilyl groups introduced with (3-glycidoxypropyl)triethoxysilane

Cellulose 3,5-dimethylphenylcarbamate was successfully immobilized onto bare silica gel for HPLC through the intermolecular polycondensation of triethoxysilyl groups, which were introduced onto the cellulose derivative via epoxide ring-opening reaction under acidic conditions. The immobilized-type chiral packing material (CPM) exhibited high chiral recognition ability and could be used with various eluents, which are incompatible with the conventional CPMs prepared by coating the derivative onto silica gel.     

Preparation and HPLC application of chiral stationary phase from 4‐tert‐butylphenylcarbamates of cellulose and amylose immobilized onto silica gel

The 4‐tert‐butylphenylcarbamates of cellulose and amylose bearing a small amount of 3‐(triethoxysilyl)propyl residues were synthesized by a one‐pot process and efficiently immobilized onto a silica gel through intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by HPLC. The polysaccharide derivatives containing about 1–2% of the 3‐(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition ability. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran (THF), which cannot be used with the conventional coated‐type CPMs. By using these eluents, the chiral recognition for many racemates was improved.     

Immobilization of 3,5‐dimethylphenylcarbamates of cellulose and amylose onto silica gel using (3‐glycidoxypropyl)triethoxysilane as linker

The 3,5‐dimethylphenylcarbamates of cellulose and amylose were effectively immobilized onto plain silica gels as chiral packing materials (CPMs) for HPLC by means of intermolecular polycondensation of triethoxysilyl groups introduced with (3‐glycidoxypropyl)triethoxysilane. The immobilization and chiral recognition abilities of the obtained CPMs prepared with different amounts of (3‐glycidoxypropyl)triethoxysilane were investigated. In addition, the solvent compatibilities of the immobilized‐type CPMs were examined with eluents containing chloroform and THF. When these eluents were used, for most of the tested racemates, the chiral resolving abilities of the obtained CPMs were improved.     

基于L-谷氨酸的手性硅胶球的制备及其应用

无机介孔硅球因其具有足够的机械强度、热稳定性,以及适应多种流动相的优点,成为高效液相色谱(HPLC)柱填料中使用最广泛和最重要的材料。但在此研究领域中,并未见球形的全无机手性硅胶用作HPLC手性固定相。该文以无机球形介孔硅胶作为研究对象,通过堆砌硅珠法,以硅溶胶为原料,L-谷氨酸(L-Glu)为手性源,在手性环境中制造出脲醛树脂与胶体二氧化硅混合的小球,在550 ℃高温下煅烧除去树脂部分,制备基于L-Glu的无机介孔硅胶球。通过元素分析、红外光谱、扫描电镜、透射电镜和氮气吸附等表征证明这是一种具有规则球形的手性硅胶球,其手性来源于硅胶球自身的骨架和孔结构。将L-Glu手性硅胶球作为固定相制备了HPLC色谱柱,以正己烷-异丙醇(9∶1, v/v)作为流动相,流速为0.1 mL/min,考察了该手性柱对一系列外消旋化合物的拆分性能。实验表明,该手性柱拆分了15种外消旋化合物,其中特罗格尔碱、吡喹酮、3-苄氧基-1,2-丙二醇、1,2-环氧己烷、3-羟基-2-丁酮、2-甲基四氢呋喃-3-酮、异丙基缩水甘油醚达到基线分离;还分离了10种苯系位置异构体,o,m,p-氨基苯酚、o,p-氯苯酚、o,m,p-碘苯胺、o,m,p-甲苯胺、o,m,p-二硝基苯、o,m,p-氯苯胺、o,m,p-硝基苯酚、o,m,p-溴苯胺达到基线分离。实验表明,L-Glu手性硅胶球在手性分离方面具有良好的可行性,与普通硅胶相比不需要进一步修饰就可以有较好的手性分离效果,是一种低成本、制备便捷的手性无机硅胶固定相。     

Synthesis and characterization of surface modified SBA-15 silica materials and their application in chromatography

Hexagonally ordered SBA-15 mesoporous silica spheres with large uniform pore diameters are obtained using the triblock copolymer, Pluronic P123, as template with a cosurfactant cetyltrimethylammonium bromide (CTAB) and the cosolvent ethanol in acidic media. A series of surface modified SBA-15 silica materials is prepared in the present work using mono- and trifunctional alkyl chains of various lengths which improves the hydrothermal and mechanical stability. Several techniques, such as element analysis, nitrogen sorption analysis, small angle X-ray diffraction, scanning electron microscopy (SEM), FTIR, solid-state (29)Si and (13)C NMR spectroscopy are employed to characterize the SBA-15 materials before and after surface modification with the organic components. Nitrogen sorption analysis is performed to calculate specific surface area, pore volume and pore size distribution. By surface modification with organic groups, the mesoporous SBA-15 silica spheres are potential materials for stationary phases in HPLC separation of small aromatic molecules and biomolecules. The HPLC performance of the present SBA-15 samples is therefore tested by means of a suitable test mixture.     

Immobilization of polysaccharide derivatives onto silica gel Facile synthesis of chiral packing materials by means of intermolecular polycondensation of triethoxysilyl groups

The 3,5-dimethylphenylcarbamates of cellulose and amylose bearing a small amount of 3-(triethoxysilyl)propyl residues were synthesized by a simple process and efficiently immobilized onto a silica gel support by intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by high-performance liquid chromatography. The polysaccharide derivatives containing about 1-2% of the 3-(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran, which cannot be used with the conventional coated-type CPMs. By using these eluents, the chiral recognitions for many racemates could be improved.     

以手性两亲小分子自组装体为模板制备介孔二氧化硅空心球

合成了手性阳离子型两亲性小分子化合物,利用圆二色谱分析了其在水中形成的自组装体的结构;以该化合物的自组装体为模板,在正丙醇和氨水的混合溶剂中制备得到了介孔二氧化硅空心球;利用扫描电镜、透射电镜、X射线衍射仪以及氮气吸附-脱附试验装置分析了二氧化硅空心球的形貌及孔结构.结果表明,两亲性小分子在水中形成的自组装体呈现手性堆积;合成的介孔二氧化硅空心球的直径约为600~800nm,壁厚约为100~150nm,其孔道垂直于球的表面,孔径约为3.0nm,比表面积约为306m2·g-1.正丙醇作为模板控制二氧化硅空心球的空腔尺寸和形貌,而两亲性小分子的自组装体作为模板控制放射状孔道的形貌和尺寸.     

可用于色谱固定相的介孔氧化硅球材料的合成

采用非离子型嵌段高分子表面活性剂EO₂₀PO₃₀EO₂₀ (P65)为结构导向剂, 正硅酸乙酯为硅源, 在酸性介质中, 静置法制备了微米级介孔氧化硅球. 通过改变合成温度、反应时间或者无机盐KCl的加入量, 可以调节介孔氧化硅球的直径(9.0～17.6 μm); 加入1,3,5-三甲苯(TMB)或者调节水热温度, 可以调节介孔氧化硅球的孔径(2.3～4.8 nm). 采用X射线衍射(XRD)、N₂吸附-脱附、扫描电镜(SEM)、激光散射粒度分布和对溶菌酶的吸附等方法, 对介孔氧化硅球的结构、孔性质、形貌、吸附性质等进行了表征. 实验发现, 孔径较小的介孔氧化硅球(≤4.3 nm)对溶菌酶的吸附不明显(≤42 mg/g), 而孔径(4.8 nm)大于溶菌酶直径的材料对溶菌酶有较大的吸附量(192 mg/g), 说明孔径均匀可调的介孔氧化硅球材料可以很好地用作体积排阻色谱柱的固定相.     

利用嵌段共聚物及无机盐合成高质量的立方相、大孔径介孔氧化硅球

使用非离子型嵌段高分子表面活性剂为模板剂，在无机盐的作用下，合成了直 径在2～4 mm、高度有序、立方相的介孔氧化硅SBA-16球。利用无机盐来调变无机 /有机物种之间的作用力和自组装能力，不仅在介观尺寸上提高了所合成介孔材料 的有序程度，而且在宏观上控制了介孔材料的形貌。经焙烧后的SBA-16球材料比表 面积为750 m~2/g，孔容为0.52 cm~3/g，孔径为7.8 nm。具有大孔径的SBA-16球材 料可以更方便地应用于大分子吸附和分离等领域。