1,8-亚乙基萘在三氟化硼乙醚-聚乙二醇中的电化学聚合

在三氟化硼乙醚(BFEE)-聚乙二醇(分子量400,PEG400)混合电解质溶液中,1,8-亚乙基萘直接阳极氧化聚合可以获得自支撑聚(1,8-亚乙基萘)膜.单体在三氟化硼乙醚+10%PEG400中的起始氧化电位为0.95 Vversus SCE,远低于单体在0.1 mol.L-1四氟化硼四丁基胺-乙腈溶液中的起始氧化电位(1.38 VversusSCE).同时PEG400的加入可以有效改善单体在三氟化硼乙醚中的溶解性.UV-Vis,FTIR和1H-NMR确定了1,8-亚乙基萘在4,5位聚合,荧光光谱表明固态及可溶聚(1,8-亚乙基萘)膜是蓝色发光材料.     

三氟化硼乙醚溶液中聚(二苯并呋喃)的电化学合成

在三氟化硼乙醚-硫酸混合电解质溶液中,二苯并呋喃直接阳极氧化聚合可以获得高质量聚(二苯并呋喃)膜.二苯并呋喃在纯三氟化硼乙醚中的起始氧化电位为1.30 VvsSCE,远低于单体在0.1 mol.L-1Bu4NBF4乙腈溶液中的起始氧化电位(2.14 V).硫酸的加入进一步降低了二苯并呋喃的氧化电位.在三氟化硼乙醚-硫酸混合电解质溶液中,二苯并呋喃的起始氧化电位可降低至1.0 V;同时在该体系中获得的聚(二苯并呋喃)膜具有良好的电化学性质和荧光性质.     

乙酸/三氟化硼乙醚混合电解质中咔唑的电化学聚合

在新型混合电解质——乙酸含体积比26%的三氟化硼乙醚和5%的分子量为400的聚乙二醇中直接氧化咔唑制得高质量的聚咔唑膜,导电率为10-2 S·cm-1。在该体系中,咔唑的起始氧化电位相对于饱和甘汞电极只有0.89 V,远低于在含0.1 mol·L-1四氟化硼四丁基铵的乙腈溶液中的1.36V（相对于饱和甘汞电极）。从该体系中获得的聚咔唑膜具有良好的电化学性质和热稳定性,可以部分溶于二甲基亚砜、四氢呋喃等强极性溶剂。荧光光谱表明该体系中获得的聚咔唑膜是一种良好的蓝光发射材料。红外、核磁波谱和理论量子化学计算结果表明,咔唑的电化学聚合主要发生在3,6位。据我们所知,这是利用乙酸三氟化硼乙醚混合电解质进行电化学聚合的首次报道。     

三氟化硼乙醚中聚(N-甲基吲哚)的电化学合成

在三氟化硼乙醚(BFEE)溶液中N甲基吲哚可以阳极氧化聚合生成聚(N-甲基吲哚).单体在BFEE中的起始氧化电位为0.95V,远低于单体在CH3CN+0.1mol LBu4NBF4体系中的起始氧化电位(1.23V).BFEE中获得的聚(N-甲基吲哚)膜具有良好的电化学性质和荧光性质.红外光谱表明聚合反应发生在2,3位.     

3-甲基噻吩和3-氯噻吩的电化学共聚

3-甲基噻吩和3-氯噻吩首次三氟化硼乙醚溶液中实现了电化学共聚。共聚物的分子结构通过电化学分析、红外和拉曼光谱得到了证实。实验结果表明：单体投料比对共聚物的结构和电化学性质有很大的影响;共聚物比3-甲基噻吩和3-氯噻吩的均聚物具有更大的充放电电容和更可逆的氧化还原性质。     

三氟化硼乙醚/乙酸混合电解质中芴的电化学聚合

在三氟化硼V(乙醚):V(乙酸)=4:5的混合电解质体系中直接氧化芴,获得芴聚合物膜,其电导率为0.5 S cm-1,高于在纯三氟化硼乙醚中制得的聚芴的电导率0.25 S cm-1.在三氟化硼乙醚:乙酸=4:5的混合电解质体系中获得的聚芴膜具有良好的电化学性质和化学稳定性.FTIR,1H-NMR和量化计算表明反应发生在...     

四氢呋喃/三氟化硼乙醚混合电解质中咔唑的电化学聚合

在四氢呋喃/三氟化硼乙醚混合电解质中直接阳极氧化咔唑制备聚咔唑.单体的起始氧化电位为0.92 Vversus SCE,远低于单体在含0.1 mol.L-1Bu4NBF4的乙腈溶液中的起始氧化电位(1.36 Vversus SCE).在此体系中获得的聚咔唑膜具有良好的电化学活性和稳定性,其电导率为7.0×10-3S.cm-1.聚合物可部分溶解于二甲基亚砜等强极性有机溶剂.UV-Vis,FT-IR,1H-NMR证明聚合物共轭长链的形成.该体系中获得的聚咔唑是一种蓝光发射材料,并具有良好的热稳定性.     

橙花素的催化合成研究

将研制得的季鏻盐型高聚物相转移催化剂用于橙花素(即β-萘乙醚)的催化合成。研究结果表明,在β-萘酚∶溴乙烷为1∶1.3(摩尔比),通N2保护,反应温度为75℃,反应时间为5 h的条件下,可获得81.7%的收率。此法具有操作简便、反应温和、催化剂能重复使用、效果良好的优点。     

锂在共轭双键高分子中的电化学嵌入反应3: 锂在聚萘中的电 化学嵌入反应

研究了锂在导电高聚物---聚萘中的嵌入反应。聚萘样品经650℃处理,作为锂电池的正极,组装成Li/(C~1~0H~6)~n电池。X射线衍射分析、ESR实验、X射线光电子能谱分析等一系列实验证实上述电池的正板反应是锂在聚萘中的电化学嵌入反应。通过XPS实验对嵌入聚萘的锂进行了价态分析,认为嵌进去的锂是以原子态及离子态两种状态存在,其结合能分别为55.7eV和57.4eV。采用电化学暂态测量技术研究了锂在导电高聚物---聚萘中的扩散,计算了锂在嵌合物中的离子电导率及淌度。用Hebb-Wagner直流极化法测量了嵌合物的电子电导。     

锂在共轭双键高分子中的电化学嵌入反应3: 锂在聚萘中的电 化学嵌入反应

研究了锂在导电高聚物---聚萘中的嵌入反应。聚萘样品经650℃处理,作为锂电池的正极,组装成Li/(C~1~0H~6)~n电池。X射线衍射分析、ESR实验、X射线光电子能谱分析等一系列实验证实上述电池的正板反应是锂在聚萘中的电化学嵌入反应。通过XPS实验对嵌入聚萘的锂进行了价态分析,认为嵌进去的锂是以原子态及离子态两种状态存在,其结合能分别为55.7eV和57.4eV。采用电化学暂态测量技术研究了锂在导电高聚物---聚萘中的扩散,计算了锂在嵌合物中的离子电导率及淌度。用Hebb-Wagner直流极化法测量了嵌合物的电子电导。     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Change of water structure by solvents and polymers

Viscosity measurements have been made of water-solvent and water-polymer solutions in a temperature range of 20–60 centigrades. A medium structure temperatureT ₀ was calculated from the Vogel-equation. Water has a structure temperature of 140–150 K, its decrease indicates structure breakage, an increase structure promotion. Pyridine, dioxane, dimethylformamide and urea are structure breakers. This is explained by a shift of the equilibrium — bonded water molecules — nonbonded — to the right. Acetone shows hydrophobic bonding in the same concentration range of 0–10 mole % as the normal alcohols. They are quasifree liquids-structure temperature zero-in the pure state. This is explained by hydrogen bridged dimer formation with the exception of tert-butanol. Its 3 methylgroups sterically prevent dimer formation and cause structuring. Adding urea to methanol-water solutions breaks water structure according to urea concentration but extends the hydrophobic bonding maximum over the whole diagram. Glucose-water solutions have a minimum in the structure temperature diagram. Its left side indicates waterstructure breakage, its right side formation of a new structure forced upon water by the sugar. The equilibrium can be formulated: Waterlike bonded-nonbonded-hetero (solvent)-like bonded, Ribose also shows this minimum but after a short range of heterobondedness the structure is completely broken to nonbondedness.The polymers dextrane and polyvinylpyrrolidone are strong waterstructure breakers. Dextrane much stronger than PVP, it breaks to nonbondedness while PVP maintains a certain structuring, perhaps indicating heterobonding at higher concentrations. Polyacrylamide is a strong structurebreaker. It resembles urea in this sense. Perhaps the solvationwater structure of the NH₂ groups is very different from pure waterstructure. Polyacrylicacid breaks waterstructure completely, if sodiumchloride is added waterstructure is rebuilt again. The only waterstructure promoting polymer is natural gelatine. Perhaps this structure is different from pure water or the watermolecule equilibrium is shifted towards bondedness. The structure temperatures of pure polyethyleneglycoles show a minimum with increasing molecular weight. The high structure temperature of the small chains is explained by long chain assoziates formation through hydrogen bridging. This liquid of long assoziate chains is structured and has a high structure temperature. With increasing molecular weight ringformation instead of linear assoziation becomes possible. These neutral rings form a free liquid. Long chains again have a linear structure and the structure temperature increases at higher molecular weights. Existence of linear chain assoziation of low molecular PEGs is proved with their breakage by adding the chain terminating methanol.Dedicated to Prof. Dr. F. H. Müller.Herrn Chemotechniker D. Ziegler möchte ich für die sorgfältige Durchführung der Messungen sehr danken.Dem Verband der Chemischen Industrie danke ich sehr für die Ermöglichung der Arbeit.     

线性反馈抑制螺旋波

A class of excitable media described by the Fitzhugh-Nagumo equation is investigated. Based on the stable and self adaptive theory, the error between the systems grid variables and the standard sampling of the periodical signal or constant signal was feed back into the system both globally and locally. When the controller was then shut off, automatically, the whole system became homogeneous. Additionally, the scheme was tested under noisy conditions. The numerical simulations results demonstrate its effectiveness. The system reached a homogeneous state and a spiral wave was converted into a target wave, resulting in a wonderful pattern emerging using a different controller. The scheme proved robust in resisting the effects of noise.     

Synthesis and characterization of inorganic solid electrolytes of Li2O-SiO2-P2O5 and Li2O-TiO2-SiO2-P2O5 systems

The lithium-ion-conducting inorganic solid electrolytes in the oxide systems Li₂O-SiO₂-P₂O₅ and Li₂O-TiO₂-SiO₂-P₂O₅ were prepared by the solid-state reaction, and the electrolyte pellet made by cold-pressing method had diameter of 13 mm and was about 1 mm thick. Phase identification and surface morphology of the products were carried out by X-ray diffraction and scanning electron microscopy. Ionic conductivity of the pellets was investigated through ac impedance. The results show that the adding of other cations can improve the ionic conductivity of the solid electrolyte, and the sintering temperature and duration can influence the ionic conductivity. The maximum ionic conductivity in the samples is 9.9 × 10⁻⁴ S/cm in the Li₂O-TiO₂-SiO₂-P₂O₅ system. Original Russian Text ? W. Li, M. Wang, Z.H. Li, X.F. Shang, H. Wang, Y.W. Wang, Y.B. Xu, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 11, pp. 1341–1345.     

Studies of Photoionization of CF3 I by Femtosecond Time-resolved Mass Spectrometry

The multi-photon dissociative photoionization dynamics of CF3I has been studied with femtosecond two-color pump-probe time of flight mass spectra at a pump pulse of 265 nm and a probe pulse of 398 nm. The life constants of CF3I+ and its fragment ions CF3+ and I+ are obtained as (96±7), (198±130) and (167±6)fs, respectively. The multi-photon dynamics leading to these ions differ. CF3I+ corresponds to a (1+2′) transition with one-photon pump excitation to the A band of CF3I. CF3+ are mainly formed by a tow-photon probe excitation to the CF3+ with subsequent dissociation of parent ions. I+ are produced in (2+2′) combined with (1+1′+2′) process. The results provide information on the multi-photon pathways involved.     

PREPARATION OF MONODISPERSE CROSSLINKED POLYMER MICROSPHERES HAVING CHLOROMETHYL GROUP BY DISTILLATION-PRECIPITATION POLYMERIZATION

Monodisperse crosslinked poly(chloromethylstyrene-co-divinylbenzene) (poly(CMSt-co-DVB)) microspheres were prepared by distillation-precipitation copolymerization of chloromethylstyrene (CMSt) and divinylbenzene (DVB) in neat acetonitrile. The polymer particles had clean surfaces due to the absence of any added stabilizer. The size of the particles ranges from 2.59 μm to 3.19 μm and with mono-dispersity around 1.002-1.014. The effects of monomer feed in copolymerization on the microsphere formation were described. The polymer microspheres were characterized by SEM and chlorinity elemental analysis.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Preparation and properties of uniform colloidal metal phosphates IV. Cadmium-, nickel-, and manganese(II)-phosphates

Colloidal dispersions of uniform spherical particles of cadmium phosphate, nickel basic phosphate, and manganese (II) phosphate were prepared by aging at elevated temperatures metal salt solutions and phosphoric acid or sodium dihydrogen phosphate in the presence of urea and sodium dodecyl sulfate. Uniform spheres were obtained only if urea and the surfactant were added within a given range of concentrations.The spherical particles were amorphous as prepared. Cadmium phosphate and nickel basic phosphate particles crystallized when calcined at appropriate temperatures. Manganese (II) phosphate particles underwent a phase transformation to crystalline plate-like solids when aged in doubly distilled water at room temperature.Supported by NFS grant CHE-8619509.Part of M. S. Thesis by L.L.S.     

衬底温度对ZnO薄膜晶体结构和电学性质的影响研究

ZnO films were deposited on glass substrates by gas discharge reaction evaporation. The influences of substrate temperature on the surface morphology, crystal structure and electric properties of ZnO films were studied by scanning electron microscopy, atomic force microscopy, X-ray diffraction spectroscopy and complex impedance spectroscopy. The results show that the films with dense and amorphous structure and lower grain boundary resistance were deposited at room temperature. When the substrate temperature is higher than 50 ℃, the films with certain c-axis orientation can be deposited. With the increase of the substrate temperature, the preferential orientation of ZnO films along c-axis is augmented, the tensile stress along c-axis orientation decreases and the grain boundary resistance increases in a marked degree. When the substrate temperature is higher than 100 ℃, the increasing trend of the preferential orientation of ZnO films along c-axis slows down. ZnO films possess high preferential c-axis orientation and best crystalline quality at 180-200 ℃. These possess a smooth surface, symmetrical grain dimension (i.e. 30-40 nm), inerratic crystal shape, less tensile stress and 0.965 epitaxial degree along the c-axis direction. Here the grain boundary effect increases and the grain boundary resistance is evidently more than that of the films deposited at room temperature. The mechanism by which substrate temperature affects crystal structure and grain boundary properties were also discussed.     

硝基胍H迁移异构化反应动力学的从头计算研究

Theoretical studies on the α- and β-forms nitroguanidine were carried out using ab initio theoretical methods, at the MP2/6-31G(d,p) level. The predicted geometrical parameters were in good agreement with the available theoretical values, which calculated by other author. The three C-N bond lengths in α-form nitroguanidine were different, the longest bond length was 1.430 A, the shortest was 1.283 A. But they were almost similar in β-form, the longest was 1.375 A, the shortest was 1.322 A. Therefore there were conjugative effects in β-form but not in α-form. The calculated results also show that the β-form is stable with respect to the α-form from energetically, lower 28.16 kJ/mol corrected with zero point vibrational energy. The transition-state for the unimolecular isomerization was conformed by the IRC calculation. The calculated energy barrier for the direct intramolecular hydrogen atom transfer isomerization process was 132.95 kJ/mol. The isomerization reaction, exothermal reaction, is a typical intramolecular hydrogen atom synfacial transfer reaction. Rate constants of the isomerization reaction were evaluated within the temperature range of 200-1773 K by the classical transition state theory. The rate constant was 1.99×10-11 s-1 and the equilibrium constant was 1.00×105 at 298 K. With the temperature increasing, the equilibrium value decayed and the reaction process was more difficult.