Comment on “The electron‐pair origin of anti‐aromaticity: Spectroscopic manifestations”

In the article by Zilberg and Haas, “The Electron‐Pair Origin of Anti‐aromaticity: Spectroscopic Manifestations,” the relative sign of the two Kekulé valence bond functions, R and L, in conjugated cyclic hydrocarbons was discussed. It was proposed that in the ground‐state wave function of aromatic compounds, the two functions contribute with like sign, while in the ground state of anti‐aromatic compounds, the two functions contribute with opposite sign. In this Comment, it is shown that the two functions enter with like sign also into the ground‐state wave function of anti‐aromatic compounds. Furthermore, it was argued that resonance tends to (de)stabilize a symmetric ground‐state geometry in case of the (anti‐)aromatic compounds. The expression derived by Zilberg and Haas for the stabilization energy shows an unusual dependence on the ring size and distortion coordinate. An alternative formula is derived for the stabilization energy, in which the energy depends quadratically on the distortion coordinate. Without further numerical calculations, it is not possible to predict whether this term will (de)stabilize a symmetric geometry of the ground state of (anti‐)aromatic molecules. Rather, we are led to believe that the influence of term in question on the geometric stability may be small, thus not providing the main reason for the geometric distortion of anti‐aromatic compounds. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Separation and Retention Behavior of Aromatic Carboxylic Acid Isomers by High‐Performance‐Liquid‐Chromatography Using β‐Cyclodextrin Bonded Phase with Diamine‐s‐Triazine Moiety

A β‐cyclodextrin (β‐CD) bonded phase with diamine‐s‐triazine moiety was prepared. The separation and retention behavior of the isomers of five aromatic carboxylic acids, including toluic acid, aminobenzoic acid, nitrobenzoic acid, hydroxybenzoic acid, and naphthoic acid were investigated by a high‐performance liquid chromatography (HPLC) using the β‐CD bonded phase prepared. The influence of mobile phase pH in the range of 2.7‐3.6 on the retention of these analytes was examined. The isomers of the aromatic carboxylic acids, with the exception of nitrobenzoic acid, were optimally and effectively separated at pH 2.7, while the three isomers of nitrobenzoic acid could be well separated at pH 3.3. Compared with the chromatographic results obtained previously on the amine‐s‐triazine‐β‐CD bonded phase, the retention factors of the isomers of aromatic carboxylic acid on the diamine‐s‐triazine‐β‐CD bonded phase increase to a relatively much greater extent. Thus, the functionality of the spacer arm of the bonded phase playing an important role in the retention of aromatic carboxylic acid isomers is demonstrated. The results also imply that the hydrogen‐bonding interaction and the mechanism of anion exchange sorption as well may contribute significantly to the retention mechanisms.     

Enantioselective Nucleophilic Aromatic Substitution with Small‐Molecule Chiral Selectors

Small‐molecule rationally designed chiral selectors have been shown to influence the stereochemical outcome of a variety of organic transformations. For instance, in a recent report, we demonstrated that a chiral selector (in conjunction with an achiral phase‐transfer catalyst) could selectively inhibit one enantiomer of electron‐deficient aromatic amides from forming Meisenheimer adducts (Scheme 2). We now extend this methodology to performing enantioselective nucleophilic aromatic substitutions. Initial studies involved biphasic kinetic resolutions with a chiral selector in conjunction with an achiral phase‐transfer catalyst (Scheme 3). The results are consistent with previous data taken for biphasic reactions (e.g., Scheme 1) where the chiral selector effectively shields the more highly complexed enantiomer from reaction. With neutral nucleophiles such as amines, the enantioselective nucleophilic aromatic substitutions can also be conducted in single‐phase systems. Several examples are given.     

Magnetic Circular Dichroism of the Long‐Wavelength π‐π* Transitions in Nitrogen‐Containing Heteroconjugated Aromatic Compounds and in Selected Ruthenium Complexes

The long‐wavelength magnetic circular dichroism (MCD) spectra of some nitrogen‐containing heteroconjugated aromatic compounds have been recorded and interpreted on the basis of quantum‐chemical model calculations. In particular, the dependence of the MCD bands on the positions of the N‐atoms inside the aromatic rings and on substituents has been investigated. Some of the compounds considered form Ru²⁺ complexes. The influence of complexation on the long‐wavelength π‐π* bands of the ligands has also been recorded and discussed.     

A solution‐processible poly(p‐phenylene vinylene) without alkyl substitution: Introducing the cis‐vinylene segments in polymer chain for improved solubility,blue emission,and high efficiency

A soluble all‐aromatic poly(2,5‐diphenyl‐1,4‐phenylenevinylene) (2,5‐DP‐PPV) is synthesized by utilizing aromatic phosphonium and aldehyde monomers through Wittig reaction. The H¹ NMR and FTIR measurements indicate that over 50% content of cis‐vinylene units exist in polymer backbone. The diphenyl‐substituted benzaldehyde monomer plays an important role to enhance cis‐products (Z‐selectivity) in Wittig reactions. The twisted cis‐segments in polymer backbone reduce the interchain interactions and enhance the solubility of such all‐aromatic PPV derivative in common organic solvents. 2,5‐DP‐PPV exhibits good solubility in common organic solvents, such as tetrahydrofuran and chloroform. The polymer film exhibits a blue light emission (λ_max = 485 nm) and a very high photoluminescence efficiency of 78%. The cis‐trans photo isomerization of this polymer in solution and the impact on the optical properties are also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5242–5250, 2008     

Synthesis of highly refractive and transparent polyimides derived from 4,4′‐thiobis[2″,6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline]

New sulfur‐containing aromatic diamines with methyl groups at the ortho position of amino groups have been developed to prepare highly refractive and transparent aromatic polyimides (PIs) in the visible region. All aromatic PIs derived from 4,4′‐thiobis[2″‐methyl‐4″‐(p‐phenylenesulfanyl)aniline ( 2 ), 4,4′‐thiobis[2,″6″‐dimethyl‐4″‐(p‐phenylenesulfanyl)aniline ( 5 ), and aromatic dianhydride, 4,4′‐[p‐thiobis(phenylenesulfanyl)]diphthalic anhydride ( 6 ) were prepared via a two‐step polycondensation. All PIs showed good thermal properties, such as 10% weight loss temperature in the range of 497–500 °C and glass transition temperatures above 196 °C. In addition, the PIs showed good optical properties, such as optical transparency above 75% at 450 nm with a 10‐μm film thickness, high refractive indices ranging from 1.7135 to 1.7301, and small in‐plane/out‐of‐plane birefringences between 0.0066 and 0.0076. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 656–662, 2010     

Effects of aromatic regularity on the structure and conductivity of polyimide‐poly(ethylene glycol) materials doped with ionic liquid

An understanding of the structure and properties of polymer electrolyte systems can be crucial to a variety of different applications. The current work performs a study of the composition, structure and properties of poly(ethylene glycol) (PEG)‐aromatic polyimide systems incorporating ionic liquids that are relevant to several applications especially fuel cell membranes. Composition was varied through using different aromatic dianhydrides, aromatic diamines and in some cases synthesis solvent. Properties were characterized using Fourier transform infrared spectroscopy, thermal gravimetric analysis, differential scanning calorimetry, small‐angle x‐ray scattering, electrochemical impedance spectroscopy and cyclic voltammetry. By varying solvent, aromatic regularity and expected rigidity can be tuned, impacting average conductivity by 30%. Varying the aromatic diamine can influence the length scale and amount of aromatic regularity, which can ultimately affect the conductivity by a factor of four. The maximum conductivity reached was 83 mS/cm at 80 °C and 70 %RH. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 509–521     

Synthesis and properties of new aromatic poly‐(ether benzoxazole)s from 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl and aromatic dicarboxylic acid chlorides

A new bis(o‐aminophenol) with a crank and twisted noncoplanar structure and ether linkages, 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl, was synthesized by the reaction of 2‐benzyloxy‐4‐fluoronitrobenzene with biphenyl‐2,2′‐diol, followed by reduction. Biphenyl‐2,2′‐diyl‐containing aromatic poly(ether benzoxazole)s with inherent viscosities of 0.52–1.01 dL/g were obtained by a conventional two‐step procedure involving the polycondensation of the bis(o‐aminophenol) monomer with various aromatic dicarboxylic acid chlorides, yielding precursor poly(ether o‐hydroxyamide)s, and subsequent thermal cyclodehydration. These new aromatic poly(ether benzoxazole)s were soluble in methanesulfonic acid, and some of them dissolved in m‐cresol. The aromatic poly(ether benzoxazole)s had glass‐transition temperatures of 190–251 °C and were stable up to 380 °C in nitrogen, with 10% weight losses being recorded above 520 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2656–2662, 2002     

Determination of trace hydroxyl polycyclic aromatic hydrocarbons in urine using graphene oxide incorporated monolith solid‐phase extraction coupled with LC‐MS/MS

The biomonitoring of hydroxy polycyclic aromatic hydrocarbons in urine, as a direct way to access multiple exposures to polycyclic aromatic hydrocarbons, has raised great concerns due to their increasing hazardous health effects on humans. Solid‐phase extraction is an effective and useful technique to preconcentrate trace analytes from biological samples. Here, we report a novel solid‐phase extraction method using a graphene oxide incorporated monolithic syringe for the determination of six hydroxy polycyclic aromatic hydrocarbons in urine coupled with liquid chromatography‐tandem mass spectrometry. The effect of graphene oxide amount, washing solvent, eluting solvent, and its volume on the extraction performance were investigated. The fabricated monoliths gave higher adsorption efficiency and capacity than the neat polymer monolith and commercial C₁₈ sorbent. Under the optimum conditions, the developed method provided the detection limits (S/N = 3) of 0.02–0.1 ng/mL and the linear ranges of 0.1–1500 ng/mL for six analytes in urine sample. The recoveries at three spiked levels ranged from 77.5 to 97.1%. Besides, the intra column‐to‐column (n = 3) and inter batch‐to‐batch (n = 3) precisions were ≤ 9.8%. The developed method was successfully applied for the determination of hydroxy polycyclic aromatic hydrocarbons in urine samples of coke oven workers.     

Synthesis of novel,nonclassical 2‐amino‐4‐oxo‐6‐(arylthio)ethylpyrrolo[2,3‐d] pyrimidines as potential inhibitors of thymidylate synthase

A novel series of 14 nonclassical 6‐substituted pyrrolo[2,3‐d]pyrimidines 2a ‐ 2n were designed as potential inhibitors of thymidylate synthase, based on previously reported 2‐amino‐4‐oxopyrrolo[2,3‐d]‐pyrimidines 1a and 1b . The synthesis of the target compounds 2a‐2n was accomplished by nucleophilic displacement of the mesylate 11 with appropriately substituted aromatic thiols. Most of the target compounds did not show inhibition of either Escherichia coli thymidylate synthase or recombinant human thymidylate synthase at the concentrations tested. However, compounds 2h (2,4‐dichloro), 2j (3,4‐dichloro) and 2m (4‐nitro) did show 25%, 40% and 35% inhibition of human thymidylate synthase at 23 μM, 23 μM and 24 μM, respectively. These observations are in accordance with previous reports, which suggest that strong electron withdrawing substituents on the side chain aromatic ring are conducive to inhibition of thymidylate synthase.     

Synthesis and optoelectronic properties of luminescent poly(p‐phenylenevinylene) derivatives containing electron‐transporting 1,3,4‐oxadiazole groups

Three random copolymers ( P1–P3 ) comprising phenylenevinylene and electron‐transporting aromatic 1,3,4‐oxadiazole segments (11, 18, 28 mol %, respectively) were prepared by Gilch polymerization to investigate the influence of oxadiazole content on their photophysical, electrochemical, and electroluminescent properties. For comparative study, homopolymer poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐p‐phenylenevinylene] ( P0 ) was also prepared by the same process. The polymers ( P0–P3 ) are soluble in common organic solvents and thermally stable up to 410 °C under a nitrogen atmosphere. Their optical properties were investigated by absorption and photoluminescence spectroscopy. The optical results reveal that the aromatic 1,3,4‐oxadiazole chromophores in P1–P3 suppress the intermolecular interactions. The HOMO and LUMO levels of these polymers were estimated from their cyclic voltammograms. The HOMO levels of P0–P3 are very similar (?5.02 to ?5.03 eV), whereas their LUMO levels decrease readily with increasing oxadiazole content (?2.7, ?3.08, ?3.11, and ?3.19 eV, respectively). Therefore, the electron affinity of the poly(p‐phenylenevinylene) chain can be gradually enhanced by incorporating 1,3,4‐oxadiazole segments. Among the polymers, P1 (11 mol % 1,3,4‐oxadiazole) shows the best EL performance (maximal luminance: 3490 cd/m², maximal current efficiency: 0.1 cd/A). Further increase in oxadiazole content results in micro‐phase separation that leads to performance deterioration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4377–4388, 2007     

An in‐needle solid‐phase microextraction device packed with etched steel wires for polycyclic aromatic hydrocarbons enrichment in water samples

A novel, low‐cost and effective in‐needle solid‐phase microextraction device was developed for the enrichment of trace polycyclic aromatic hydrocarbons in water samples. The in‐needle solid‐phase microextraction device could be easily assembled by inserting hydrofluoric acid‐etched wires, which were used as adsorbent, into a 22‐gauge needle tube within spring supporters. Compared with the commercial solid‐phase microextraction fiber, the developed device has higher efficiency for the extraction of polycyclic aromatic hydrocarbons with four to six rings from water samples using the optimized extraction conditions. With gas chromatography equipped with a flame ionization detector, the limits of detection for the polycyclic aromatic hydrocarbons with four to six rings ranged from 0.0020 to 0.0067 ng/mL. The relative standard deviations for one needle and needle‐to‐needle extractions were in the range of 5.2–9.9% (n = 5) and 3.4–12.3% (n = 5), respectively. The spiked recoveries of the polycyclic aromatic hydrocarbons in tap water samples ranged from 73.2 to 95.4%. This in‐needle solid‐phase microextraction device could be a good field sampler because of the low sample loss over a long storage time.     

Synthesis and characterization of novel fluorinated polyimides derived from 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethylphenyl)ethylidene]diphthalic anhydride and aromatic diamines

A novel fluorinated aromatic dianhydride, 4,4′‐[2,2,2‐trifluoro‐1‐(3‐trifluoromethyl‐phenyl)ethylidene]diphthalic anhydride (TFDA) was synthesized by coupling of 3′‐trifluoromethyl‐2,2,2‐trifluoroacetophenone with o‐xylene under the catalysis of trifluoromethanesulfonic acid, followed by oxidation of KMnO₄ and dehydration. A series of fluorinated aromatic polyimides derived from the novel fluorinated aromatic dianhydride TFDA with various aromatic diamines, such as p‐phenylenediamine (p‐PDA), 4,4′‐oxydianiline (ODA), 1,4‐bis(4‐aminophenoxy)benzene (p‐APB), 1,3‐bis(4‐amino‐phenoxy)benzene (m‐APB), 4‐(4‐aminophenoxy)‐3‐trifluoromethylphenylamine (3FODA) and 1,4‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzene (6FAPB), were prepared by polycondensation procedure. All the fluorinated polyimides were soluble in many polar organic solvents such as NMP, DMAc, DMF, and m‐cresol, as well as some of low boiling point organic solvents such as CHCl₃, THF, and acetone. Homogeneous and stable polyimide solutions with solid content as high as 35–40 wt % could be achieved, which were prepared by strong and flexible polyimide films or coatings. The polymer films have good thermal stability with the glass transition temperature of 232–322 °C, the temperature at 5% weight loss of 500–530 °C in nitrogen, and have outstanding mechanical properties with the tensile strengths of 80.5–133.2 MPa as well as elongations at breakage of 7.1–12.6%. It was also found that the polyimide films derived from TFDA and fluorinated aromatic diamines possess low dielectric constants of 2.75–3.02, a low dissipation factor in the range of 1.27–4.50 × 10^?3, and low moisture absorptions <1.3%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4143–4152, 2004     

Synthesis,photoluminescence, and electrochromism of polyamides containing (3,6‐di‐tert‐butylcarbazol‐9‐yl)triphenylamine units

A new carbazole‐derived, triphenylamine (TPA)‐containing aromatic dicarboxylic acid monomer, 4,4′‐dicarboxy‐4″‐(3,6‐di‐tert‐butylcarbazol‐9‐yl)TPA, was synthesized, and it led to a series of electroactive aromatic polyamides with main‐chain TPA and pendent 3,6‐bis(tert‐butyl)carbazole units by reacting it with various aromatic diamines via the phosphorylation polyamidation technique. The polyamides were amorphous with good solubility in many organic solvents and could be solution‐cast into flexible and strong films. They showed high glass‐transition temperatures (282–335 °C) and high thermal stability (10% weight loss temperatures >480 °C). The electroactive polymer films had well‐defined and reversible redox couples with good cycle stability in acetonitrile solutions. The polymer films also exhibited fluorescent and multielectrochromic behaviors. The anodically electrochromic polyamide films had moderate coloration efficiency (～100 cm²/C) and high optical contrast ratio of transmittance change (Δ%T) up to 47% at 813 nm and 48% at 414 nm for the green coloring. After hundreds of cyclic switches, the polymer films still retained good redox and electrochromic activity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of Heterodinuclear Hemisalen Complexes on a Hexaarylbenzene Scaffold and their Application for the Cross‐Pinacol Coupling Reaction

Intermolecular cross‐pinacol coupling reaction between aliphatic and aromatic aldehydes by using heterodinuclear hemisalen complexes 1 _cis with vanadium(V) and titanium(IV) on a hexaarylbenzene scaffold is reported. Our ligand design is based on the individual activation of two aldehydes by vanadium and titanium, which are positioned with a suitable space on the rigid scaffold. Ligands such as 1 _cis were synthesized by Diels–Alder addition and decarbonylation reaction, followed by condensation of dialdehyde 3 _cis with various aminophenols. The influence of the substituents on the ligands on the pinacol coupling reaction was investigated. As a result, the reductive coupling reaction between aliphatic and aromatic aldehydes by using a catalytic amount of 1 _cis in the presence of Me₃SiCl and Zn provided the corresponding cross‐coupled 1,2‐diol in good yields with high cross‐selectivity.     

Modular amino acid amide chiral ligands for enantioselective addition of diethylzinc to aromatic aldehydes

Enantioselective addition of diethylzinc to a series of aromatic aldehydes was developed using a modular amino acid amide chiral ligand (2S)‐3‐phenyl‐N‐((R)‐1‐phenyl‐ethyl)‐2‐(tosylamino)propanamide without using titanium complex. The catalytic system employing 10 mol% of 1g was found to promote the addition of diethylzinc (ZnEt₂) to a wide range of aromatic aldehydes with electron‐donating and electron‐withdrawing substituents, giving up to 82% ee of the corresponding secondary alcohol under mild conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Exploiting Cofactor Versatility to Convert a FAD‐Dependent Baeyer–Villiger Monooxygenase into a Ketoreductase

Cyclohexanone monooxygenases (CHMOs) show very high catalytic specificity for natural Baeyer–Villiger (BV) reactions and promiscuous reduction reactions have not been reported to date. Wild‐type CHMO from Acinetobacter sp. NCIMB 9871 was found to possess an innate, promiscuous ability to reduce an aromatic α‐keto ester, but with poor yield and stereoselectivity. Structure‐guided, site‐directed mutagenesis drastically improved the catalytic carbonyl‐reduction activity (yield up to 99 %) and stereoselectivity (ee up to 99 %), thereby converting this CHMO into a ketoreductase, which can reduce a range of differently substituted aromatic α‐keto esters. The improved, promiscuous reduction activity of the mutant enzyme in comparison to the wild‐type enzyme results from a decrease in the distance between the carbonyl moiety of the substrate and the hydrogen atom on N5 of the reduced flavin adenine dinucleotide (FAD) cofactor, as confirmed using docking and molecular dynamics simulations.     

A Perylene Bisimide Cyclophane as a “Turn‐On” and “Turn‐Off” Fluorescence Probe

A rigid, covalently linked perylene‐3,4:9,10‐tetracarboxylic acid bisimide (PBI) cyclophane was synthesized by imidization of a bay‐substituted perylene bisanhydride with p‐xylylenediamine. The interchromophoric distance of approximately 6.5 Å establishes an ideal rigid cavity for the encapsulation of large aromatic compounds such as perylene and anthracene with binding constants up to 4.6×10⁴ M ^?1 (in CHCl₃). For electron‐poor guest molecules, the complexation process is accompanied by a significantly increased fluorescence, whereas the emission intensity is dramatically quenched by more electron‐rich guests because of the formation of charge‐transfer complexes. Furthermore, the influence of the PBI core twist on the binding constant results in a remarkable selectivity towards more flexible aromatic guest molecules.     

Monobromination of Activated Aromatic Compounds with Polyvinylbenzyltriphenylphosphonium Supported Tribromide

Chloromethylated crosslinked co‐polyvinylbenzene‐divinylbenzene (2% DVB) was treated with triphenylphosphine and then with sodium bromate and hydrobromic add to afford red colored insoluble polyvinylbenzyltriphenylphosphonium supported tribromide. This reagent could be used as a mild and efficient monobrominating reagent for activated aromatic compounds such as phenols, aromatic ethers, aromatic amines and acetylanilines with good yields and high para‐selectivity.     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002