Biosynthesis of poly-β-hydroxybutyrate and exopolysaccharides on azotobacter chroococcum strain 6B utilizing simple and complex carbon sources

Coproduction of poly-β-hydroxybutyrate (PHB) and exopolysaccharides (EPS) was investigated with Azotobacter chroococcum strain 6B isolated from soil samples. The bacterium was cultured using various carbon sources solely or with 0.1 g/L of ammonium sulfate. Ammonium addition resulted in reduced PHB and EPS production with glucose, fructose, and sucrose media, but cellular mass remained constant except for sucrose. Protein was nearly twofold higher in ammonium-grown cultures. Glucose and fructose alone biosynthesized high amounts of EPS (maximum 2.1 and 1.1 g/L, respectively, at 72 h), whereas PHB was accumulated only in glucose-grown cells. Sucrose almost did not produce EPS. Conversely, PHB content was the highest obtained from all experimented conditions (1.1 g/L at 48 h, 40% cell dry wt). When a complex carbon source such as sugar cane molasses was utilized, PHB was accumulated concomitant with EPS production from the initial time to 48 h (0.75 g/L, 37% cell dry wt and 0.6 g/L, respectively), and then PHB decayed at 72 h (0.2 g/L). On the other hand, EPS continued to be biosynthesized (1.1 g/L, 72 h). PHB fractions of total intra- and extracellular biopolymers were calculated. Sucrose-modified Burk’s medium without ammonium addition is suggested as a medium capable of diverting the carbon source for the production of intracellular PHB rather than EPS with A. chroococcum 6B.     

Optimization of medium by orthogonal matrix method for submerged mycelial culture and exopolysaccharide production in Collybia maculata

Optimization of submerged culture conditions for the production of mycelial growth and exopolysaccharides (EPSs) by Collybia maculata was investigated. The optimum temperature and the initial pH for EPS production in a shake-flask culture of C. maculata were found to be 20°C and 5.5, respectively. Among the various medium’s constituents examined, glucose, Martone A-1, K₂HPO₄, and CaCl₂ were the most suitable carbon, nitrogen, and mineral sources for EPS production, respectively. The optimum concentration of the medium’s ingredients determined using the orthogonal matrix method was as follows: 30 g/L of glucose, 20 g/L of Martone A-1, 1g/L of K₂HPO₄, and 1g/L of CaCl₂. Under the optimized culture conditions, the maximum concentration of EPSs in a 5-L stirred-tank reactor was 2.4 g/L, which was approximately five times higher than that in the basal medium. A comparative fermentation result showed that the EPS productivity in an airlift reactor was higher than that in the stirred-tank reactor despite the lower mycelial growth rate. The specific productivities and the yield coefficients in the airlift reactor were higher than those in the stirred-tank reactor even though the volumetric productivities were higher in the stirred-tank reactor than in the airlift reactor.     

Production of succinic acid by anaerobiospirillum succiniciproducens

The effect of an external supply of carbon dioxide and pH on the production of succinic acid byAnaerobiospirillum succiniciproducens was studied. In a rich medium containing yeast extract and peptone, when the external carbon dioxide supply was provided by a 1.5M Na₂CO₃ solution that also was used to maintain the pH at 6.0, no additional carbon dioxide supply was needed. In fact, sparging CO₂ gas into the fermenter at 0.025 L/L-min or higher rates resulted in significant decreases in both production rate and yield of succinate. Under the same conditions, the production of the main by-product acetate was not affected by sparging CO₂ gas into the fermenter. The optimum pH (pH 6.0) for the production of succinic acid was found to be in agreement with results previously reported in the literature. Succinic acid production also was studied in an industrial-type inexpensive medium in which light steep water was the only source of organic nutrients. At pH 6.0 and with a CO₂ gas sparge rate of 0.08 L/L-min, succinate concentration reached a maximum of 32 g/L in 27 h with a yield of 0.99 g succinate/g glucose consumed.     

Culture pH affects exopolysaccharide production in submerged mycelial culture of Ganoderma lucidum

In submerged culture of Ganoderma lucidum, the pH optimum for cell growth has been shown to be lower than that for exopolysaccharides (EPS) formation. Therefore, in the present study, a two-stage pH-control strategy was employed to maximize the productions of mycelial biomass and EPS. When compared, a batch culture without pH control had a maximum concentration of EPS and endopolysaccharides, which was much lower than those with pH control. Maximum mycelial growth (12.5 g/L) and EPS production (4.7 g/L) were achieved by shifting the controlled pH from 3.0 to 6.0 after day 4. The contrast between the controlled-pH process and uncontrolled pH was marked. By using various two-stage culture processes, it was also observed that culture pH has a significant affect on the yield of product, mycelial morphology, chemical composition, and molecular weight of EPS. A detailed observation of mycelial morphology revealed that the productive morphological form for EPS production was a dispersed pellet (controlled pH shifting from 3.0 to 6.0) rather than a compact pellet with a dense core area (controlled pH 4.5) or a feather-like pellet (controlled pH shifting from 6.0 to 3.0). Three different polysaccharides were obtained from each pH conditions, and their molecular weights and chemical compositions were significantly different.     

Effect of environmental factors and carbohydrate on gellan gum production

Submerged culture fermentation studies were carried out in batch mode for optimizing the environmental parameters and carbon source requirement by Pseudomonas elodea for the production of gellan gum. The maximum production of gellan gum was obtained with 16-h-old culture and 8% inoculum at 30°C and pH 7.0 after 52 h of incubation (6.0 g/L). Of the various carbon sources tested, 2% sucrose, glucose, and soluble starch yielded considerably high amounts of gellan. Studies on the concentration of various carbohydrates on gellan gum production indicated that the optimum concentration of glucose and starch was 3%, whereas for sucrose it was 4%. The addition of glucose in the medium above 3% had a detrimental effect on gellan yield. The investigation of intermediate two-step addition of glucose under identical conditions of fermentation showed an enhanced production of gellan (8.12 g/L) as compared with the control (6.0 g/L). To optimize the recovery of gellan from fermented broth, different solvents were tested for precipitation of gellan gum. Among the various solvents tested, tetrahydrofuran gave better recovery of gellan (82%) as compared with the conventional solvent isopropanol (49%).     

Optimization of culture parameters for production of podophyllotoxin in suspension culture of Podophyllum hexandrum

The root explants of the germinated seedlings of Podophyllum hexandrum were grown in MS medium supplemented with indole acetic acid (IAA) (2 mg/L) and activated charcoal (0.5%), and healthy callus culture was obtained after incubation for 3 wk at 20°C. The cultivation of plant cells in shake flask was associated with problems such as clumping of cells and browning of media, which were solved by the addition of pectinase and polyvinylpyrrolidone. The effect of major media components and carbon source was studied on the growth and podophyllotoxin production in suspension culture. It was found that glucose was a better carbon source than sucrose and that NH₄ ⁺:NO₃ ⁻ ratio (total nitrogen concentration of 60 mM) and PO₄ ³⁻ did not have much effect on the growth and product formation. The relative effect of culture parameters (inoculum level, pH, IAA, glucose, NH₄ ⁺:NO₃ ⁻ ratio, and PO₄ ³⁻) on the overall growth and product response of the plant cell suspension culture was further investigated by Plackett-Burman design. This indicated that inoculum level, glucose, IAA, and pH had significant effects on growth and production of podophyllotoxin. To identify the exact optimum concentrations of these parameters on culture growth and podophyllotoxin production, central composite design experiments were formulated. The overall response equations with respect to growth and podophyllotoxin production as a function of these culture parameters were developed and used to determine the optimum concentrations of these parameters, which were pH 6.0, 1.25 mg/L of IAA, 72 g/L of glucose, and inoculum level of 8 g/L.     

Fermentation metabolism and kinetics in the production of organic acids byPropionibacterium acidipropionici

The genusPropionibacterium acidipropionici was grown under pH-controlled batch fermentation conditions for the production of acetic and propionic acids using 19.1 g/L glucose as a carbon source. The optimum pH range was found to be between 5.5 and 6.5. Bacterial metabolism and fermentation pathways were altered at pH values outside this range. Lactic acid was produced as a key intermediate, with the final acetic and propionic acid production entirely dependent on the cell's ability to metabolize the lactic acid. Most of the glucose in the medium was consumed in less than 20 h of fermentation and converted to lactic acid. Batch fermentation at pH 6 showed that lactic acid was completely utilized to produce 8.5 g/L propionic acid and 5.7 g/L acetic acid. However, the bacteria were unable to metabolize lactic acid at pH 7, resulting in 0.7 g/L propionic acid and 7.0 g/L acetic acid in the fermenter. A kinetic study of batch fermentation at pH 6 showed two distinct growth phases during the fermentation. Most of the cell growth was achieved in the exponential growth stage when glucose was consumed as a main substrate. A nonexponential growth stage was observed when lactic acid was utilized as a carbon source, producing propionic and acetic acids as secondary metabolites.     

Evaluation of inoculum of Candida guilliermondii grown in presence of glucose on xylose reductase and xylitol dehydrogenase activities and xylitol production during batch fermentation of sugarcane bagasse hydrolysate

The effect of glucose on xylose-xylitol metabolism in fermentation medium consisting of sugarcane bagasse hydrolysate was evaluated by employing an inoculum of Candida guilliermondii grown in synthetic media containing, as carbon sources, glucose (30 g/L), xylose (30 g/L), or a mixture of glucose (2 g/L) and xylose (30 g/L). The inoculum medium containing glucose promoted a 2.5-fold increase in xylose reductase activity (0.582 IU/mg_prot) and a 2-fold increase in xylitol dehydrogenase activity (0.203 IU/mg_prot) when compared with an inoculum-grown medium containing only xylose. The improvement in enzyme activities resulted in higher values of xylitol yield (0.56 g/g) and productivity (0.46 g/[L·h]) after 48 h of fermentation.     

Aspects of xylitol formation in sugarcane bagasse hydrolysate by Candida guillie rmondii in the presence of tetracycline

The biocon version of xylose intoxylitol using pH values of 4.0, 5.5 and 7.0 and tetracycline concentrations of 20 and 40 mg/L was carried out to verify the influence of these parameters on Candida guilliermondii metabolism for xylitol production. Experiments were performed with sugarcane bagasse hemicellulosi chydrolysate (48.5 g/L of xylose) in 125-mL Erlenmeyer flasks, at 30°C, 200 rpm, during 88 h. The results demostrated that the bioconversion of xylose into xylitol was significantly influenced by the pH. On the other hand, in media containing 20 or 40 mg/L of tetracycline, this bioconversion was not significantly affected. The best results of xylitol production were obtained in hemicellulosic hydrolysate without tetracycline, at pH 7.0 In these conditions, the maxim um specific growth rate was 0.014/h and the yield factor of xylitol and volumetric productivity were 0.85g/g and 0.70g/L/h respectively. Xylitol and cell growth occureed simultaneously.     

Production of lipase by a newly isolated <Emphasis Type="Italic">Bacillus coagulans</Emphasis> under solid-state fermentation using melon wastes

Summary An extracellular lipase was produced by Bacillus coagulans by solid-state fermentation. Solid waste from melon was used as the basic nutrient source and was supplemented with olive oil. The highest lipase production (78,069 U/g) was achieved after 24h of cultivation with 1% olive oil enrichment. Enzyme had an optimal activity at 37°C and pH 7.0, and sodium dodecyl sulfate increased lipase activity. NH ₄NO₃ increased enzyme production, whereas organic nitrogen had no effect. The effect of the type of carbon sources on lipolytic enzyme production was also studied. The best results were obtained with starch and maltose (148,932 and 141,629 U/g, respectively), whereas a rather low enzyme activity was found in cultures grown on glucose and galactose (approx 118,769 and 123,622 U/g, respectively). Enzyme was inhibited with Mn⁺² and Ni⁺² by 68 and 74%, respectively. By contrast, Ca⁺² enhanced enzyme production by 5%.     

Enhancement of Paenibacillus sp. D9 Lipopeptide Biosurfactant Production Through the Optimization of Medium Composition and Its Application for Biodegradation of Hydrophobic Pollutants

Interests in biosurfactant in industrial and environmental applications have increased considerably in recent years, owing to their potential benefits over synthetic counterparts. The present study aimed at analyzing the stability and oil removal efficiency of a new lipopeptide biosurfactant produced by Paenibacillus sp. D9 and its feasibility of its use in biotechnological applications. Paenibacillus sp. D9 was evaluated for optimal growth conditions and improved production yield of lipopeptide biosurfactant with variations in different substrate parameters such as carbon (C), nitrogen (N), C:N: ratio, metal supplements, pH, and temperature. Enhanced biosurfactant production was observed when using diesel fuel and ammonium sulfate as carbon and nitrogen source respectively. The maximum biosurfactant yield of 4.11 g/L by Paenibacillus sp. D9 occurred at a C/N ratio of 3:1, at pH 7.0, 30 °C, 4.0 mM MgSO₄, and 1.5% inoculum size. The D9 biosurfactant was found to retain surface-active properties under the extreme conditions such as high thermal, acidic, alkaline, and salt concentration. The ability to emulsify further emphasizes its potential usage in biotechnological application. Additionally, the lipopeptide biosurfactant exhibited good performance in the degradation of highly toxic substances when compared with chemical surfactant, which proposes its probable application in biodegradation, microbial-enhanced oil recovery or bioremediation. Furthermore, the biosurfactants were effective in a test to stimulate the solubilization of hydrophobic pollutants in both liquid environments removing 49.1 to 65.1% diesel fuel including hydrophobic pollutants. The study highlights the usefulness of optimization of culture parameters and their effects on biosurfactant production, high stability, improved desorption, and solubilization of hydrophobic pollutants.

     

A simultaneous sucrose bioconversion into ethanol and levan byZymomonas mobilis

Two biotechnological systems were developed for sucrose conversion into levan and ethanol withZymomonas mobilis, ensuring a 66.7% transfer of substrate carbon in a batch and 61% carbon transfer in a continuous culture. The effect of glucose, ethanol, and medium pH on sucrose conversion byZ. mobilis was studied. The addition of ethanol to the fermentation medium, in the final conc. of 100 g/L, uncoupled levan synthesis from ethanol fermentation. For a continuous culture, the most efficient conversion of substrate carbon into levan was reached at pH 4.8, giving 64.2 g/L levan, with the levan yield of 0.22 g/g and the productivity of 3.2 g/L/h.     

The effect of cell density on the production of xylitol fromd-xylose by yeast

The rate of xylitol production from D-xylose increased with increasing yeast cell density. The optimal temperature for xylitol production is 36‡ C, and the optimal pH range is from 4.0 to 6.0. At high initial yeast cell concentration of 26 mg/mL, 210 g/L of xylitol was produced from 260 g/L of D-xylose after 96 h of incubation with an indicated yield of 81% of the theoretical value.     

Continuous culture studies of xylose-fermentingZymomonas mobilis

The continuous cofermentation performance of xylose-fermentingZymomonas mobilis at 30°C and pH 5.5 was characterized using a pure-sugar feed solution that contained 8 g/L glucose and 40 g/L xylose. Successful chemostat start up resulted in complete utilization of glucose and greater than 85% utilization of xylose, but was only reproducibly achieved using initial dilution rates at or less than 0.04/h; once initiated, cofermentation could be maintained at dilution rates of 0.04 to 0.10/h. Whereas xylose and cell-mass concentrations increased gradually with increasing dilution rate, ethanol concentrations and ethanol yields on available sugars remained approximately constant at 20–22 g/L and 80–90% of theoretical, respectively. Volumetric and specific ethanol productivities increased linearly with increasing dilution rate, rising from approx 1.0 each (g/L/h or g/g/h) at a dilution rate of 0.04/h to approx 2.0 each (g/L/h or g/g/h) at a dilution rate of 0.10/h. Similarly, specific sugar-utilization rates increased from approx 2.0 g/g/h at dilution rate 0.04/h to approx 3.5 g/g/h at dilution rate of 0.10/h. The estimated values of 0.042 g/g for the maximum Z.mobilis cell-mass yield on substrate and 1.13 g/g/h for the minimum specific substrate utilization rate required for cellular maintenance energy are within the range of values reported in the literature. Results are also presented which suggest that long-term adaptation in continuous culture is a powerful technique for developing strains with higher tolerance to inhibitory hemicellulose hydrolyzates.     

Production, purification, and characterization of a polygalacturonase from a new strain of kluyveromyces marxianus isolated from coffee wet-processing wastewater

A new high polygalacturonase (PG)-producing Kluyveromyces marxianus strain was isolated from coffee wet-processing wastewater. PG production in this strain is not repressed in the presence of 100g/L of glucose and, being growth-associated, reached its maximum accumulation in the culture medium at the beginning of the stationary phase. Oxygen and galacturonic acid negatively regulated enzyme synthesis, and glucose as the carbon source afforded better enzyme yields than lactose. The data reported here show that this strain exhibits the highest index of PG production among the wild-type strains reported so far (18.8U/mL). PG was readily purified by ion-exchange chromatography on SP-Sepharose FF. The activity corresponded to a single protein with an M _r of 41.7 kDa according to sodium dodecyl sulfate polyacrylamide gel electrophoresis. The enzyme was stable in the pH range of 3.0–5.0 and displayed an optimal temperature of 55°C; it showed a typical endo-splitting way of substrate hydrolysis and exhibited a fair degree of activity on pectin with a high degree of esterification.     

Evaluation of carob pod as a substrate for pullulan production byAureobasidium pullulans

The production of extracellular polysaccharides from carob pod extract by Aureobasidium pullulans in batch fermentation was investigated. Optimum conditions for polysaccharide productivity, polysaccharide yield, and fermentation efficiency were: initial sugar concentration of 25 g/L, initial pH 6.5, and temperature 25–30°C. A maximum polysaccharide concentration (6.5 g/L), polysaccharide productivity (2.16 g/L/d), total biomass concentration (6.3 g/L), and polysaccharide yield (30%) were obtained with inoculum at 10% (v/v), initial sugars in carob pod extract of 25 g/L, pH 6.5, and 25°C. The highest values of pullulan proportion (70% of total polysaccharides) and fermentation efficiency (89%) were assumed at initial sugar concentration of 25 g/L, pH 6.5 and 30°C. Structural characterization of purified pullulan samples by monosaccharide and methylation analyses, 13C-NMR, and pullulanase digestion combined with size-exclusion chromatography revealed the presence of mainly α-(l → 4) (68%) and α-(l → 6) (31%) glucosidic linkages; however, small amounts (<1%) of triply linked (1, 3, 4-and 1, 4, 6-Glc) glucose residues were detected. The molecularsize distribution and intrinsic viscosity of pullulan derived from culture grown at pH 4.5 (30°C) showed a higher molecular weight than its counterpart obtained at pH 6.5 (30°C).     

Medium Initial pH and Carbon Source Stimulate Differential Alkaline Cellulase Time Course Production in Stachybotrys microspora

The production profile of cellulases of the mutant strain A19 from the filamentous fungus Stachybotrys microspora was studied in the presence of various carbon sources (glucose, lactose, cellulose, carboxymethylcellulose (CMC), and wheat bran) and a range of medium initial pH (5, 7, and 8). Two extracellular cellulases from the Stachybotrys strain (endoglucanases and β-glucosidases) were monitored by enzymatic assay, sodium dodecyl sulfate–polyacrylamide gel electrophoresis, and zymogram analysis. Glucose and lactose repressed CMCase time course production while they permitted a strong β-glucosidase one. On Avicel cellulose, CMC, and wheat bran, both activities were highly produced. Wheat bran (WB) is the best carbon source with an optimum of production at days 5 and 6. The production kinetics of both activities were shown to depend on the medium initial pH, with a preference for neutral or alkaline pH in the majority of conditions. The exception concerned the β-glucosidase which was much more produced at acidic pH, on glucose and cellulose. Most interestingly, a constitutive and conditional expression of an alkaline endoglucanase was revealed on the glucose-based medium at an initial pH of 8 units. The zymogram analysis confirmed such conclusions and highlighted that carbon sources and the pH of the culture medium directed a differential induction of various endoglucanases and β-glucosidases.     

Succinic Acid Production from Cheese Whey using Actinobacillus succinogenes 130 Z

Actinobacillus succinogenes 130 Z was used to produce succinic acid from cheese whey in this study. At the presence of external CO₂ supply, the effects of initial cheese whey concentration, pH, and inoculum size on the succinic acid production were studied. The by-product formation during the fermentation process was also analyzed. The highest succinic acid yield of 0.57 was obtained at initial cheese whey concentration of 50 g/L, while the highest succinic acid productivity of 0.58 g h⁻¹ L⁻¹ was obtained at initial cheese whey concentration of 100 g/L. Increase in pH and inoculum size caused higher succinic acid yield and productivity. At the preferred fermentation condition of pH 6.8, inoculum size of 5% and initial cheese whey concentration of 50 g/L, succinic acid yield of 0.57, and productivity of 0.44 g h⁻¹ L⁻¹ were obtained. Acetic acid and formic acid were the main by-products throughout the fermentation run of 48 h. It is feasible to produce succinic acid using lactose from cheese whey as carbon resource by A. succinogenes 130 Z.     

Continuous production of butanol by clostridium acetobutylicum immobilized in a fibrous bed bioreactor

We explored the influence of dilution rate and pH in continuous cultures of Clostridium acetobutylicum. A 200-mL fibrous bed bioreactor was used to produce high cell density and butyrate concentrations at pH 5.4 and 35°C. By feeding glucose and butyrate as a cosubstrate, the fermentation was maintained in the solventogenesis phase, and the optimal butanol productivity of 4.6g/(L h) and a yield of 0.42 g/g were obtained at a dilution rate of 0.9h⁻¹ and pH 4.3. Compared to the conventional acetone-butanol-ethanol fermentation, the new fermentation process greatly improved butanol yield, making butanol production from corn an attractive alternative to ethanol fermentation.     

A β-glucosidase from Sclerotinia sclerotiorum

The filamentous fungus Sclerotinia sclerotiorum, grown on a xylose medium, was found to excrete one β-glucosidase (β-glu x). The enzyme was purified to apparent homogeneity by ammonium sulfate precipitation, gel filtration, anion-exchange chromatography, and high-performance liquid chromatography (HPLC) gel filtration chromatography. Its molecular mass was estimated to be 130 kDa by HPLC gel filtration and 60 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis, suggesting that β-glu x may be a homodimer. For p-nitrophenyl β-d-glucopyranoside hydrolysis, apparent K _m and V _max values were found to be 0.09 mM and 193 U/mg, respectively, while optimum temperature and pH were 55–60°C and pH 5.0, respectively. β-Glu x was strongly inhibited by Fe²⁺ and activated about 35% by Ca²⁺. β-Glu x possesses strong transglucosylation activity in comparison with commercially available β-glucosidases. The production rate of total glucooligosaccharides (GOSs) from 30% cellobiose at 50°C and pH 5.0 for 6 h with 0.6 U/mL of enzyme preparation was 80 g/L. It reached 105 g/L under the same conditions when using cellobiose at 350 g/L (1.023 M). Finally, GOS structure was determined by mass spectrometry and ¹³C nuclear magnetic resonance spectroscopy.