A Theoretical Study of the Interaction of Hydrogen and Oxygen with Palladium or Gold Adsorbed on Pyridine‐Like Nitrogen‐Doped Graphene

The interaction of H₂ and O₂ molecules in the presence of nitrogen‐doped graphene decorated with either a palladium or gold atom was investigated by using density functional theory. It was found that two hydrogen molecules were adsorbed on the palladium atom. The interaction of these adsorbed hydrogen molecules with two oxygen molecules generates two hydrogen peroxide molecules first through a Eley–Rideal mechanism and then through a Langmuir–Hinshelwood mechanism. The barrier energies for this reaction were small; therefore, we expect that this process may occur spontaneously at room temperature. In the case of gold, a single hydrogen molecule is adsorbed and dissociated on the metal atom. The interaction of the dissociated hydrogen molecule on the surface with one oxygen molecule generates a water molecule. The competitive adsorption between oxygen and hydrogen molecules slightly favors oxygen adsorption.     

A DFT study on the possibility of using a single Cu atom incorporated nitrogen-doped graphene as a promising and highly active catalyst for oxidation of CO

Using dispersion-corrected density functional theory (DFT) calculations, a single Cu adatom incorporated nitrogen-doped graphene (CuN₃-Gr) is proposed as a new and highly active noble-metal-free catalyst for carbon monoxide (CO) oxidation reaction. According to our results, the Cu adatom can be stably anchored onto the monovavancy site of the nitrogen-doped graphene, and the resulting large diffusion barrier suggests that the metal clustering is avoided in CuN₃-Gr. Three possible reaction mechanisms for CO oxidation (ie, Eley–Rideal, Langmuir–Hinshelwood, and termolecular Eley–Rideal) are systematically studied. It is found that the activation energy for the rate-determining step of the termolecular Eley–Rideal mechanism is only 0.13 eV, which is much smaller than those of others. The results of this study may provide a useful guideline for the design of highly active and promising single-metal catalysts for the CO oxidation reaction based on graphene.     

Direct Hydrogenation of Dinitrogen and Dioxygen via Eley–Rideal Reactions

Most Eley–Rideal abstraction reactions involve an energetic gas‐phase atom reacting directly with a surface adsorbate to form a molecular product. Molecular projectiles are generally less reactive, may dissociate upon collision with the surface, and thus more difficult to prove that they can participate intact in abstraction reactions. Here we provide experimental evidence for direct reactions occurring between molecular N₂⁺ and O₂⁺ projectiles and surface‐adsorbed D atoms in two steps: first, the two atoms of the diatomic molecule undergo consecutive collisions with a metal surface atom without bond rupture; and second, the rebounding molecule abstracts a surface D atom to form N₂D and O₂D intermediates, respectively, detected as ions. The kinematics of the collisional interaction confirms product formation by an Eley–Rideal reaction mechanism and accounts for inelastic energy losses commensurate with surface re‐ionization. Such energetic hydrogenation of dinitrogen may provide facile activation of its triple bond as a first step towards bond cleavage.     

Modeling and simulation of stationary catalytic processes

Generalized models for steady state catalytic processes are presented in matrix form. Multistep reaction rate control is assumed. Numerical algorithms for solving of the created linear and nonlinear equation systems are developed and tested. Four examples are considered: an Eley–Rideal-mechanism, a Langmuir–Hinshelwood mechanism, a dual route, dual site mechanism, and a monomolecular decomposition with steady state multiplicity. The overall reaction rates are simulated as a function of the reactant concentrations. A maximum reaction rate is obtained in the case of a Langmuir–Hinshelwood mechanism (example 2), the location of the rate maximum in the concentration domain is shifted towards the concentration of the reactant with the lowest adsorption constants. An Eley–Rideal mechanism (example 1) has always monotonously increasing rate curves. In the case of steady state multiplicity (example 4) all steady states could be simulated with the proposed algorithm. The computation of reaction rate surfaces is important in investigating the behavior of complicated catalytic systems (e.g., systems with multistep rate control and/or steady state multiplicity), in planning of experiments and in chemical reactor simulation.     

Electronic composition-property relationship applied to SO2 chemisorption on Pt111 surfaces, alloys, and overlayers

We have developed a new electronic composition-property relationship between the adsorption energy of molecules binding unequally to multiple atoms on metal surfaces and the electronic properties of the surface. This relationship allows the estimation of the relative stability of adsorbates on various surfaces, assuming that the adsorbate adopts the same local configuration on each surface, and therefore also allows the estimation of the adsorption energy of molecules through large regions of parameter space in alloy systems with data from only a few explicit calculations. We have applied this relationship to the adsorption of SO(2) on Pt surfaces alloyed with Pd, Cu, Ru, and Ni. Using a new formula for weighting the metal d-band, we found a strong linear relationship between the weighted positions of the d states of surfaces and the most stable molecular adsorption energies. The consequences of our electronic composition-property relationship for catalyst design are also discussed.     

Quantum mechanical model for the dissociative adsorption of diatomic molecules on metal surfaces

A quantum mechanical nonadiabatic theory of dissociative adsorption of diatomic molecules X2 on metal surface is presented. The following reaction coordinates are used to construct crossing diabatic potential energy surfaces (PES): the distance y between the atoms of the X2 molecule, the distance x of the X2 molecular axis from the surface, the set of coordinates describing possible displacements of metal atoms under adsorption. Expression for the rate constant is derived using the model potentials describing vibrations along these coordinates. The calculated dependency of the rate constant W on the reaction heat DeltaE is compared with that in classical approximation. It is shown that quantum effects lead to a weaker dependence of W on DeltaE as compared to that for classical one.     

Theoretical study of the CO catalytic oxidation on Au/SAPO‐11 zeolite

Quantum chemistry calculations were carried out, using ONIOM2 methodology, to investigate the CO adsorption and oxidation on gold supported on Silicoaluminophospates (SAPO) molecular sieves Au/SAPO‐11 catalysts. Two models were studied, one containing one Au atom per site (Au? SAPO‐11), and the other with two Au atoms per site (Au₂? SAPO‐11). The results reveal that the CO adsorption and oxidation are exothermic on Au/SAPO11 with an ΔE of ?41.0 kcal/mol and ΔE = ?52.0 kcal/mol, for the adsorption and oxidation, respectively. On the Au₂? SAPO‐11 model, the CO adsorption and oxidation reaction occur, with a ΔE of ?29.7 kcal/mol and ?52 kcal/mol, respectively. According to our results, the oxidation reaction exhibits an Eley‐Rideal type mechanism with adsorbed CO. The theoretical calculations reveal that this type of material could be interesting to disperse Au and consequently to strengthen its catalytic use for different reactions. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem 110:2573–2582, 2010     

苯并咪唑类缓蚀剂缓蚀性能的理论评价

采用量子化学计算和分子动力学模拟相结合的方法, 对2-巯基苯并咪唑(A)、2-氨基苯并咪唑(B)、2-甲基苯并咪唑(C)和苯并咪唑(D)等四种缓蚀剂抑制HCl对碳钢腐蚀的性能进行理论评价, 并对其缓蚀机理进行分析. 全局活性指数的计算表明, 四种分子中, 2-巯基苯并咪唑分子具有最强的反应活性; 对于其他三种分子, Fukui指数和全电子密度分布指出, 2-氨基苯并咪唑具有两个亲电攻击中心, 可在金属表面形成双中心吸附, 其缓蚀性能应优于2-甲基苯并咪唑和苯并咪唑; 缓蚀剂分子与三层铁原子表面相互作用的分子动力学模拟进一步确认2-甲基苯并咪唑比苯并咪唑在金属表面吸附更稳定. 综合量子化学计算和分子动力学模拟的计算结果, 四种缓蚀剂分子缓蚀效率的顺序应为A>B>C>D, 缓蚀性能的理论评价结论与实验结果相吻合.     

Properties of large organic molecules on metal surfaces

The adsorption of large organic molecules on surfaces has recently been the subject of intensive investigation, both because of the molecules’ intrinsic physical and chemical properties, and for prospective applications in the emerging field of nanotechnology. Certain complex molecules are considered good candidates as basic building blocks for molecular electronics and nanomechanical devices. In general, molecular ordering on a surface is controlled by a delicate balance between intermolecular forces and molecule–substrate interactions. Under certain conditions, these interactions can be controlled to some extent, and sometimes even tuned by the appropriate choice of substrate material and symmetry. Several studies have indicated that, upon molecular adsorption, surfaces do not always behave as static templates, but may rearrange dramatically to accommodate different molecular species. In this context, it has been demonstrated that the scanning tunnelling microscope (STM) is a very powerful tool for exploring the atomic-scale realm of surfaces, and for investigating adsorbate–surface interactions. By means of high-resolution, fast-scanning STM unprecedented new insight was recently achieved into a number of fundamental processes related to the interaction of largish molecules with surfaces such as molecular diffusion, bonding of adsorbates on surfaces, and molecular self-assembly. In addition to the normal imaging mode, the STM tip can also be employed to manipulate single atoms and molecules in a bottom–up fashion, collectively or one at a time. In this way, molecule-induced surface restructuring processes can be revealed directly and nanostructures can be engineered with atomic precision to study surface quantum phenomena of fundamental interest. Here we will present a short review of some recent results, several of which were obtained by our group, in which several features of the complex interaction between large organic molecules and metal surfaces were revealed. The focus is on experiments performed using STM and other complementary surface-sensitive techniques.     

Inelastic Interactions of Slow Electrons with Adsorbed Particles

When slow electrons impinge on metal surfaces which are covered with an adsorbed layer, desorption of neutral particles as well as of positive ions, partly accompanied by fragmentation of the adparticles, is observed. The mechanism of these processes is of interest in connection with existing concepts of the surface bond. The effect can also be used as a probe for the investigation of complex adsorption layers. Transfer of much smaller energies to the adsorbate can lead to vibrational excitation. This process may find application in the vibrational spectroscopic study of adsorbates. If the energy transferred in the inelastic collision is high enough to ionize low-lying levels of the surface atoms, radiationless re-ordering of the electron configuration (Auger-effect) can occur subsequently. The secondary electrons of characteristic energy emitted in these processes can be used for qualitative analysis of the surface.     

Ordered Porous Nitrogen‐Doped Carbon Matrix with Atomically Dispersed Cobalt Sites as an Efficient Catalyst for Dehydrogenation and Transfer Hydrogenation of N‐Heterocycles

Single‐atom catalysts (SACs) have been explored widely as potential substitutes for homogeneous catalysts. Isolated cobalt single‐atom sites were stabilized on an ordered porous nitrogen‐doped carbon matrix (ISAS‐Co/OPNC). ISAS‐Co/OPNC is a highly efficient catalyst for acceptorless dehydrogenation of N‐heterocycles to release H₂. ISAS‐Co/OPNC also exhibits excellent catalytic activity for the reverse transfer hydrogenation (or hydrogenation) of N‐heterocycles to store H₂, using formic acid or external hydrogen as a hydrogen source. The catalytic performance of ISAS‐Co/OPNC in both reactions surpasses previously reported homogeneous and heterogeneous precious‐metal catalysts. The reaction mechanisms are systematically investigated using first‐principles calculations and it is suggested that the Eley–Rideal mechanism is dominant.     

Surface chemistry of quantum-sized metal nanoparticles under light illumination

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous chemistry at the surface of the nanoparticles. The optical properties of metal nanoparticles, such as light absorption, also exhibit a strong dependence on their size. It is expected that there will be strong coupling of light absorption and surface chemistry when the metal nanoparticles are small enough. For instance, metal nanoparticles with sizes in the range of 2–10 nm exhibit both surface plasmon resonances, which can efficiently produce high-energy hot electrons near the surface of the nanoparticles under light illumination, and the Coulomb blockade effect, which favors electron transfer from the metal nanoparticles to the surface adsorbates. The synergy of efficient hot electron generation and electron transfer on the surface of small metal nanoparticles leads to double-faced effects: (i) surface (adsorption) chemistry influences optical absorption in the metal nanoparticles, and (ii) optical absorption in the metal nanoparticles promotes (or inhibits) surface adsorption and heterogeneous chemistry. This review article focuses on the discussion of typical quantum phenomena in metal nanoparticles of 2–10 nm in size, which are referred to as “quantum-sized metal nanoparticles”. Both theoretical and experimental examples and results are summarized to highlight the strong correlations between the optical absorption and surface chemistry for quantum-sized metal nanoparticles of various compositions. A comprehensive understanding of these correlations may shed light on achieving high-efficiency photocatalysis and photonics.

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous photochemistry at the surface of the nanoparticles.     

Nitrogen‐doped C60 as a robust catalyst for CO oxidation

The O₂ activation and CO oxidation on nitrogen‐doped C₅₉N fullerene are investigated using first‐principles calculations. The calculations indicate that the C₅₉N fullerene is able to activate O₂ molecules resulting in the formation of superoxide species ( ) both kinetically and thermodynamically. The active superoxide can further react with CO to form CO₂ via the Eley–Rideal mechanism by passing a stepwise reaction barrier of only 0.20 eV. Ab initio molecular dynamics (AIMD) simulation is carried out to evidence the feasibility of the Eley–Rideal mechanism. In addition, the second CO oxidation takes place with the remaining atomic O without any activation energy barrier. The full catalytic reaction cycles can occur energetically favorable and suggest a two‐step Eley–Rideal mechanism for CO oxidation with O₂ catalyzed by the C₅₉N fullerene. The catalytic properties of high percentage nitrogen‐doped fullerene (C₄₈N₁₂) is also examined. This work contributes to designing higher effective carbon‐based materials catalysts by a dependable theoretical insight into the catalytic properties of the nitrogen‐doped fullerene. © 2017 Wiley Periodicals, Inc.     

Coverage effects in the adsorption of H2 on Pd(100) studied by ab initio molecular dynamics simulations

The interaction of hydrogen with palladium surfaces represents one of the model systems for the study of the adsorption and absorption at metal surfaces. Theoretical gas-surface dynamics studies have usually concentrated on the adsorption dynamics on clean surfaces. Only recently it has become possible, based on advances in the electronic structure codes and improvements in the computer power, to address the much more complex problem of the adsorption dynamics on precovered surfaces. Here, I present ab initio molecular dynamics (AIMD) simulations based on periodic density functional theory (DFT) calculations of the adsorption of H(2) on hydrogen-precovered Pd(100) for a broad variety of different hydrogen coverage structures. The stability of the adsorbate structures and the adsorption dynamics are analyzed in detail. Calculated sticking probabilities are larger than expected for pure site-blocking consistent with experimental results. It turns out that the adsorption dynamics on the strongly corrugated surfaces depends sensitively on the dynamic response of the substrate atoms upon the impact of the impinging H(2) molecules. In addition, for some structures the adsorption probability was evaluated as a function of the kinetic energy. Adsorbate structures corresponding to the same coverage but with different arrangements of the adsorbed atoms can lead to a qualitatively different dependence of the adsorption probability on the kinetic energy changing also the order of the preferred structures, as far as the adsorption is concerned, as a function of the kinetic energy. This indicates that dynamical effects such as steering and dynamical trapping play an important role in the adsorption on these precovered substrates.     

First Principles Study of Atomic Adsorption on (111) and (100) Surfaces of Iridium

We have investigated the adsorption of nine different adatoms on the (111) and (100) surfaces of Iridium (Ir) using first principles density functional theory. The study explores surface functionalization of Ir which would provide important information for further study of its functionality in catalysis and other surface applications. The adsorption energy, stable geometry, density of states and magnetic moment are some of the physical quantities of our interest. The study reveals that the three-/four- fold hollow site is energetically the most favorable adsorption site on the (111)/(100) surface of Ir. The investigation on a wide range of coverages (from 0.04 to 1 monolayer) reveals the strong coverage dependence of adsorption energy of the adsorbate atoms. The adsorption energy is found to increase as the coverage increases, implying a repulsive interaction between the adsorbates. Strong hybridization between the adsorbates and the substrate electronic states is revealed to impact the adsorption, while the magnetic moment of the adsorbates is found to be suppressed. The Bader analysis reveals significant amount of charge transfers between the adsorbate atoms and the substrate. The binding of adsorbate atoms on the (100) surface is observed to be moderately stronger as compared to that on the (111) surface.     

Computer Simulation of Eley‐Rideal Reactions Over Rough Surface

The effect of surface roughness on an Eley‐Rideal reaction mechanism is studied. The rough surfaces are generated over a 2‐dimensional square lattice using the random deposition model. In an Eley‐Rideal reaction mechanism, a reacting particle approaches from the bulk and reacts with an active site upon collision with it. Three different rough surfaces are considered for the study. Multifractal scaling analysis is performed where the complex distribution of reaction probabilities is analyzed. Two cases of reactions are considered. 1) The reacting particle reacts at its first contact to the surface and 2) the reacting particle diffuses till it finds the lowest‐height position and reacts. The results obtained from the above two cases are compared. Significant differences between τ(q) and f(α) multifractal spectra for these two cases are found. The larger deviation from linearity in the τ(q) curves for the latter than the former gives wider f(α) spectra, indicating greater heterogeneity in the reaction probability distribution. Dynamic scaling theory is also applied on the Eley‐Rideal reaction mechanism over the surface with different surface roughnesses to obtain the two scaling parameters α_d and β_d. The values of α_d and β_d are found to be negative.     

Charge transfers at metal/oxide interfaces: a DFT study of formation of K delta+ and Au delta- species on MgO/Ag(100) ultra-thin films from deposition of neutral atoms

Ultra-thin oxide films grown on a metal substrate and of thickness smaller than 1 nm may exhibit unusual properties with respect to thicker films or single crystal oxide surfaces. In a previous study [G. Pacchioni, L. Giordano and M. Baistrocchi, Phys. Rev. Lett., 2005, 94, 226104] we have suggested that a Au atom adsorbed on a MgO/Mo(100) thin film becomes negatively charged by direct electron tunneling from the Mo metal and that this is related to the low MgO/Mo(100) work function. Here we show, based on periodic DFT supercell calculations, that charge transfer can occur also in the opposite direction by adsorption of electropositive K atoms on MgO/Ag(100) films. We predict the occurrence of a charge transfer also for Au on MgO/Ag(100) films despite the fact that here the work function is 1 eV larger than in MgO/Mo(100). The formation of a layer of adsorbed negative (Au delta-/MgO/Ag) or positive (K delta+/MgO/Ag) adsorbates results in an increase or decrease, respectively, of the MgO/Ag(100) work function as predicted by the classical Gurney model for ionic adsorbates on metal surfaces.     

Ab initio studies of a water layer at transition metal surfaces

This paper presents a detailed study of a water adlayer adsorbed on Pt(111) and Rh(111) surfaces using periodic density functional theory methods. The interaction between the metal surface and the water molecules is assessed from molecular dynamics simulation data and single point electronic structure calculations of selected configurations. It is argued that the electron bands around the Fermi level of the metal substrate extend over the water adlayer. As a consequence in the presence of the water layer the surface as a whole still maintains its metallic conductivity-a result of a crucial importance for understanding the process of electron transfer through the water/metal interface and electrochemical reactions in particular. Our results also indicate that there exists a weak bond between the hydrogen of the water and the Rh metal atoms as opposed to the widespread (classical) models based on purely repulsive interaction. This suggests that the commonly used classical interactions potentials adopted for large scale molecular dynamics simulations of water/metal interfaces may need revision. Two adsorption models of water on transition metals with the OH bonds pointing towards or away of the surface are also examined. It is shown that due to the very close values of their adsorption energies one should consider the real structure of water on the surface as a mixture of these simple "up" and "down" models. A model for the structure of the adsorbed water layer on Rh(111) is proposed in terms of statistical averages from molecular dynamics simulations.     

Steering and ro-vibrational effects on dissociative adsorption and associative desorption of H2/Pd(100)

The interaction of hydrogen with many transition metal surfaces is characterized by a coexistence of activated with non-activated paths to adsorption with a broad distribution of barrier heights. By performing six-dimensional quantum dynamical calculations using a potential energy surface derived from ab initio calculations for the system H₂/Pd(100) we show that these features of the potential energy surface lead to strong steering effects in the dissociative adsorption and associative desorption dynamics.

In particular, we focus on the coupling of the translational, rotational and vibrational degrees of freedom of the hydrogen molecule in the reaction dynamics.     

Vibrational dynamics of adsorbates – Quo vadis?

Vibrational energy is a prime reservoir for activating surface processes such as adsorption, desorption and reaction. On metal surfaces, vibrational energy flow occurs on a femto-to picosecond time scale and competing energy dissipation channels in this time range determine the outcome of chemical reactions at surfaces. Fundamental questions of relaxation time, mode selectivity, importance of intra- versus intermolecular coupling and coupling between electronic and vibrational states can now be tackled for relatively complex adsorbates and surfaces. This review looks at the state-of-the-art of surface vibrational dynamics across a wide range of vibrational spectroscopies and the challenges and exciting prospects that lie ahead to further not only our understanding but also the control of vibrational energy flow in model systems as well as real-world problems.