Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

A new insight into the mechanism of 1,3‐dienes cationic polymerization. II. Structure of poly(1,3‐pentadiene) synthesized with tBuCl/TiCl4 initiating system

The microstructure of poly(1,3‐pentadiene) synthesized by cationic polymerization of 1,3‐pentadiene with ^tBuCl/TiCl₄ initiating system is analyzed using one‐dimensional‐ and two‐dimensional‐NMR spectroscopy. It is shown that unsaturated part of chain contains only homo and mixed dyads with trans?1,4‐, trans?1,2‐, and cis?1,2‐structures with regular and inverse (head‐to‐head or tail‐to‐tail) enchainment, whereas cis?1,4‐ and 3,4‐units are totally absent. The new quantitative method for the calculation of content of different structural units in poly(1,3‐pentadiene)s based on the comparison of methyl region of ¹³C NMR spectra of original and hydrogenated polymer is proposed. The signals of tert‐butyl head and chloromethyl end groups are identified in a structure of poly(1,3‐pentadiene) chain and the new approaches for the quantitative calculation of number‐average functionality at the α‐ and ω‐end are proposed. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3297–3307     

New poly(oxyethylene) derivatives and their oligo analogues from Diels–Alder reactions of 5‐[methoxypoly(oxyethylene)]‐(3E)‐1, 3‐pentadiene and 5‐methoxyethoxy‐(3E)‐1,3‐pentadiene

Diels–Alder reactions of 5‐[methoxypoly(oxyethylene)]‐(3E)‐1,3‐pentadiene ( 1a ) with maleic anhydride, diethyl acetylenedicarboxylate (DADC), and acrolein were investigated for the synthesis of new poly(ethylene glycol) derivatives. To facilitate the characterization of the derivatives, Diels–Alder reactions of 5‐methoxyethoxy‐(3E)‐1,3‐pentadiene ( 1b ) with the aforementioned dienophiles were also studied. The reaction of o‐toluidine with the cycloaddition product from maleic anhydride and 1b resulted in the corresponding amide products. The reactions of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone with cycloadducts derived from 1a and 1b with DADC resulted in the aromatization of the corresponding products. An NMR analysis of the adducts obtained from 1a and acrolein in water and from 1b and acrolein in water/acetonitrile (4:1 v/v) indicated a mixture of endo and exo, with the endo concentration being approximately 80%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1895–1902, 2005     

C2‐Symmetric Zirconocenes in the Polymerization of Conjugated Diolefins

C₂‐symmetric zirconocenes activated by methylaluminoxane were utilized as catalysts in the polymerization of 1,3‐diolefins. The results indicate that the most crowded catalytic precursor rac[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ ( 1 ) is also the most active one, giving 1,4‐polymerization of 1,3‐butadiene and (Z)‐1,3‐pentadiene and 1,2‐polymerization of (E)‐1,3‐pentadiene and 4‐methyl‐1,3‐pentadiene. Probably, the different behavior of 1 with respect to other C₂‐symmetric zirconocenes utilized is due to the different stability of the bond between the last inserted monomer unit and the metal, as well as to the coordination of incoming monomer.     

Diethylbis(2,2′‐bipyridine)iron/MAO. A Very Active and Stereospecific Catalyst for 1,3‐Diene Polymerization

Diethylbis(2,2′‐bipyridine)Fe/MAO is an extremely active catalyst for the polymerization of 1,3‐dienes. Polymers with a 1,2 or 3,4 structure are formed from butadiene, isoprene, (E)‐1,3‐pentadiene and 3‐methyl‐1,3‐pentadiene, while cis‐1,4 polymers are derived from 2,3‐dimethyl‐1,3‐butadiene. The 1,2 (3,4) polymers obtained at 25°C are amorphous, while those obtained below 0°C are crystalline, as was determined by means of X‐ray diffraction. Mechanistic implications of the results are briefly discussed.     

Annulenoide Tetrathiafulvalene:, 5,16‐Bis(1,3‐benzodithiol‐2‐yliden)‐5,16‐dihydrotetraepoxy‐ und 5,16‐Bis(1,3‐benzodithiol‐2‐yliden)‐5,16‐dihydrotetraepithio[22]annulene(2.1.2.1)

Annulenoid Tetrathiafulvalenes: 5,16‐Bis(1,3‐benzodithiol‐2‐ylidene)‐5,16‐dihydrotetraepoxy‐ and 5,16‐Bis(1,3‐benzodithiol‐2‐ylidene)‐5,16‐dihydrotetraepithio[22]annulenes(2.1.2.1) The title compounds are among the first tetrathiafulvalenes with annulene spacers, here with tetraepoxy‐[22]annulene(2.1.2.1) (see 3a ), tetraepithio[22]annulene(2.1.2.1) (see 3b ), and diepithiodiepoxy[22]annulene(2.1.2.1) (see 23 ) units. The annulenoid tetrathiafulvalenes 3a and 3b are prepared by cyclizing McMurry coupling of the 5,5′‐(1,3‐benzodithiol‐2‐ylidenemethylene)bis[furan‐ or thiophene‐2‐carbaldehydes] ( 8a or 8b , resp.) or by Wittig reaction of (1,3‐benzodithiol‐2‐yl)tributylphosphonium tetrafluoroborate ( 13b ) with tetraepoxy[22]annulene(2.1.2.1)‐1,12‐dione 20 (formation of 3a ) or diepithiodiepoxy[22]annulene(2.1.2.1)‐1,12‐dione 22 (formation of 23 ). The annulenoide tetrathiafulvalene 3a is obtained as a mixture of the isomers (E,E)‐ and (Z,Z)‐ 3a . At 130°, (Z,Z)‐ 3a rearranges quantitatively into the (E,E)‐isomer. Isomer (E,E)‐ 3a is a dynamic molecule, where the (E)‐ethene‐1,2‐diyl bridges rotate around the adjacent σ‐bonds. The tetraepithioannulene derivative 3b as well as 23 only exist in the (Z,Z)‐configuration. The oxidation of (E,E/Z,Z)‐ 3a with Br₂ yields the annulene‐bridged tetrathiafulvalene dication (E,E)‐ 3a _Ox, while with 4,5‐dichloro‐3,6‐dioxocyclohexa‐1,4‐diene‐1,2‐dicarbonitrile (DDQ) obviously only the radical cation 3a _Sem is formed, which belongs to the class of cyanine‐like violenes. The annulenoide tetrathiafulvalenes 3b and 23 , which exist only in the (Z,Z)‐configuration, obviously for steric reasons, cannot be oxidized by DDQ. Electrochemical studies are in agreement with these results.     

Synthesis of asymmetrically substituted head‐to‐head polyacetylenes from 2,3‐disubstituted‐1,3‐butadienes

Asymmetrically substituted head‐to‐head polyacetylenes with phenyl and triphenylamine, thienyl or pyrenyl side groups were synthesized through anionic or controlled radical polymerization of 2,3‐disubstituted‐1,3‐butadienes and subsequent dehydrogenation process. Anionic polymerizations of the designed monomers bearing pendent triphenylamine and thienyl group gave narrow disperse disubstituted precursor polybutadienes with exclusive 1,4‐ or 4,1‐structure, which were confirmed by GPC and NMR measurements. In addition, the monomers possessing pyrenyl group were polymerized via nitroxide mediated radical polymerization and the resulting polymers were obtained with controlled molecular weight and low polydispersities. These polybutadiene precursors were then dehydrogenated in the presence of 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone. Thus asymmetrically substituted head‐to‐head polyacetylenes were obtained as indicated by ¹H NMR. The properties of polybutadiene precursors and the corresponding polyacetylenes were analyzed by UV–vis, DSC, and TGA. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 395–402     

On the Crystal Structure of Isotactic cis‐1,4‐Poly(1,3‐pentadiene)

Summary: A comparison between the crystal structure of isotactic cis‐1,4‐poly(1,3‐pentadiene) previously predicted by molecular mechanics calculations and that successively determined by other authors by experimental data is reported. The agreement between the two structures is very good as far as the space group, the unit cell parameters and the conformation of the polymer chain are concerned. The mode of packing of the chains proposed in the experimental crystal structure is very similar to that found as relative minimum in the previous energy calculations. The coexistence, in different amounts, of these two modes of packing is suggested by the analysis of the simulated X‐ray spectra and by the results of new energy calculations.

A mode of packing of chains of isotactic cis‐1,4‐poly(1,3‐pentadiene).     

Diblock copolymers of polystyrene‐b‐poly(1,3‐cyclohexadiene) exhibiting unique three‐phase microdomain morphologies

The synthesis and molecular characterization of a series of conformationally asymmetric polystyrene‐block‐poly(1,3‐cyclohexadiene) (PS‐b‐PCHD) diblock copolymers (PCHD: ～90% 1,4 and ～10% 1,2), by sequential anionic copolymerization high vacuum techniques, is reported. A wide range of volume fractions (0.27 ≤ ?_PS ≤ 0.91) was studied by transmission electron microscopy and small‐angle X‐ray scattering in order to explore in detail the microphase separation behavior of these flexible/semiflexible diblock copolymers. Unusual morphologies, consisting of PCHD core(PCHD‐1,4)–shell(PCHD‐1,2) cylinders in PS matrix and three‐phase (PS, PCHD‐1,4, PCHD‐1,2) four‐layer lamellae, were observed suggesting that the chain stiffness of the PCHD block and the strong dependence of the interaction parameter χ on the PCHD microstructures are important factors for the formation of this unusual microphase separation behavior in PS‐b‐PCHD diblock copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1564–1572     

Influence of tertiary diamines on the synthesis of high‐molecular‐weight poly(1,3‐cyclohexadiene)

The living synthesis of poly(1,3‐cyclohexadiene) was performed with an initiator adduct that was synthesized from a 1:2 (mol/mol) mixture of N,N,N′,N′‐tetramethylethylenediamine (TMEDA) and n‐butyllithium. This initiator, which was preformed at 65 °C, facilitated the synthesis of high‐molecular‐weight poly(1,3‐cyclohexadiene) (number‐average molecular weight = 50,000 g/mol) with a narrow molecular weight distribution (weight‐average molecular weight/number‐average molecular weight = 1.12). A plot of the kinetic chain length versus the time indicated that termination was minimized and chain transfer to the monomer was eliminated when a preformed initiator adduct was used. Chain transfer was determined to occur when the initiator was generated in situ. The polymerization was highly sensitive to both the temperature and the choice of tertiary diamine. The use of the bulky tertiary diamines sparteine and dipiperidinoethane resulted in poor polymerization control and reduced polymerization rates (7.0 × 10⁻⁵ s⁻¹) in comparison with TMEDA‐mediated polymerizations (1.5 × 10⁻⁴ s⁻¹). A series of poly(1,3‐cyclohexadiene‐block‐isoprene) diblock copolymers were synthesized to determine the molar crossover efficiency of the polymerization. Polymerizations performed at 25 °C exhibited improved molar crossover efficiencies (93%) versus polymerizations performed at 40 °C (80%). The improved crossover efficiency was attributed to the reduction of termination events at reduced polymerization temperatures. The microstructure of these polymers was determined with ¹H NMR spectroscopy, and the relationship between the molecular weight and glass‐transition temperature at an infinite molecular weight was determined for polymers containing 70% 1,2‐addition (150 °C) and 80% 1,4‐addition (138 °C). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1216–1227, 2005     

A New Monomer for π‐Conjugated Polymers — Synthesis and Characterization of Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane

Bis((Z)‐5‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole‐4‐yl)monosulfane ( 6 ), a molecule consisting of two diphenyldithiafulvene units connected by a sulfur bridge, was synthesized by the selective lithiation of (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole ( 7a ) at the endocyclic double bond and by subsequent reaction of the lithiated intermediate with bis(phenylsulfonyl)sulfane. Since this reaction sequence proceeded with retention of configuration, of three possible isomers (E, E, Z, E, and Z, Z) only the Z, Z form was obtained. On the basis of the X‐ray structure analysis and the NMR‐spectroscopic characterization of 6 supplemented by the NMR parameters of (E)‐ and (Z)‐4‐phenyl‐2‐phenylmethylidene‐1, 3‐dithiole, it was demonstrated that two characteristic ⁵J coupling constants of the proton at the exocyclic double bond indicate the configuration (Z or E) of disubstituted dithiafuvene derivatives.     

Copolymerization of styrene with (Z)-1,3-pentadiene in the presence of a syndiotactic-specific catalyst

Copolymerization of styrene with (Z)-1,3-pentadiene affords copolymers mostly containing 1,2 pentadiene units. Both the styrene and the pentadiene units are in syndiotactic arrangement but the comonomer sequence distribution is far from bernoullian. Interestingly, the behavior of (Z)-1,3-pentadiene does not change much when polymerization temperature raises from −20 to +20°C, notwithstanding that (Z)-1,3-pentadiene affords a 1,2-syndiotactic homopolymer at −20°C but a prevailingly 1,4 cis homopolymer at +20°C. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2697–2702, 1997     

Polymerization of 1,3‐dienes with functional groups. II. Free‐radical polymerization of N‐(2‐methylene‐3‐butenoyl)piperidine

The free‐radical homopolymerization and copolymerization behavior of N‐(2‐methylene‐3‐butenoyl)piperidine was investigated. When the monomer was heated in bulk at 60 °C for 25 h without an initiator, about 30% of the monomer was consumed by the thermal polymerization and the Diels–Alder reaction. No such side reaction was observed when the polymerization was carried out in a benzene solution with 1 mol % 2,2′‐azobisisobutylonitrile (AIBN) as an initiator. The polymerization rate equation was found to be R_p ∝ [AIBN]^0.507[M]^1.04, and the overall activation energy of polymerization was calculated to be 89.5 kJ/mol. The microstructure of the resulting polymer was exclusively a 1,4‐structure that included both 1,4‐E and 1,4‐Z configurations. The copolymerizations of this monomer with styrene and/or chloroprene as comonomers were carried out in benzene solutions at 60 °C with AIBN as an initiator. In the copolymerization with styrene, the monomer reactivity ratios were r₁ = 6.10 and r₂ = 0.03, and the Q and e values were calculated to be 10.8 and 0.45, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1545–1552, 2003     

2‐(4′‐Pyridyl‐N‐oxide)‐Substituted Hemithioindigos as Photoresponsive Guests for a Super Aryl‐Extended Calix[4]pyrrole Receptor

We report the synthesis of two 2‐(4′‐pyridyl‐N‐oxide)‐substituted hemithioindigos (HTIs). We probed their photoisomerization by using UV/Vis and ¹H NMR spectroscopy techniques. Light irradiation at λ=450 nm provoked the isomerization of the HTI Z isomer to the E counterpart to a large extent (≈80 % at the photostationary state). ¹H NMR titration experiments revealed the formation of thermodynamically and kinetically stable 1:1 inclusion complexes of the (Z)‐HTI isomers with a super aryl‐extended host (association constant>10⁴ m ^?1). Photoirradiation at λ=450 nm of the inclusion complexes induced the isomerization of the bound HTI N‐oxide to afford the (E)‐HTI?calix[4]pyrrole complex. We determined accurate association constant values for the 1:1 inclusion complexes of the (Z)‐ and (E)‐HTI isomers by using isothermal titration calorimetry experiments. The results showed that the stability constants of the (E)‐HTI complexes were 2.2–2.8‐fold lower than those of the (Z)‐HTI counterparts, which explains the lack of light‐induced release of the former to the bulk solution.     

Kinetic study of copper(I)‐catalyzed click chemistry step‐growth polymerization

Oligomers and polymers containing triazole units were synthesized by the copper(I)‐catalyzed 1,3‐dipolar cycloaddition step‐growth polymerization of four difunctional azides and alkynes. In a first part, monofunctional benzyl azide was used as a chain terminator for the polyaddition of 1,6‐diazidohexane and α,ω‐bis(O‐propargyl)diethylene glycol, leading to polytriazole oligomers of controlled average degree of polymerization (DP_n = 3–20), to perform kinetic studies on low‐viscosity compounds. The monitoring of the step‐growth click polymerization by ¹H NMR at 25, 45, and 60 °C allowed the determination of the activation energy of this click chemistry promoted polyaddition process, that is, E_a = 45 ± 5 kJ/mol. The influence of the catalyst content (0.1–5 mol % of Cu(PPh₃)₃Br according to azide or alkyne functionalities) was also examined for polymerization kinetics performed at 60 °C. In a second part, four high molar mass polytriazoles were synthesized from stoichiometric combinations of diazide and dialkyne monomers above with p‐xylylene diazide and α,ω‐bis(O‐propargyl)bisphenol A. The resulting polymers were characterized by DSC, TGA, SEC, and ¹H NMR. Solubility and thermal properties of the resulting polytriazoles were discussed based on the monomers chemical structure and thermal analyses. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5506–5517, 2008     

Quinolone Analogs 13: Synthesis of Novel 1,1′‐(2‐Methylenepropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) and Related Compounds

The reaction of the 4‐hydroxyquinoline‐3‐carboxylate 6 with pentaerythritol tribromide gave the 1,1′‐(2‐methylenepropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 11 , whose reaction with bromine afforded the 1,1′‐(2‐bromo‐2‐bromomethylpropane‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 12 . Compound 12 was transformed into the (Z)‐1,1′‐(2‐acetoxymethylpropene‐1,3‐diyl)di(4‐quinolone‐3‐carboxylate) 13 or (E)‐1,1′‐[2‐(imidazol‐1‐ylmethyl)propene‐1,3‐diyl]di(4‐quinolone‐3‐carboxylate) 14 . Hydrolysis of the dimer (Z)‐ 13 or (E)‐ 14 with potassium hydroxide provided the (E)‐1,1′‐(2‐hydroxymethylpropene‐1,3‐diyl)di(4‐quinolone‐3‐carboxylic acid) 15 or (Z)‐1,1′‐[2‐(imidazol‐1‐ylmethyl)propene‐1,3‐diyl]di(4‐quinolone‐3‐carboxylic acid) 16 , respectively. The nuclear Overhauser effect (NOE) spectral data supported that those hydrolysis resulted in the geometrical conversion of (Z)‐ 13 into (E)‐ 15 or (E)‐ 14 into (Z)‐ 16 .     

Novel amphiphilic block copolymers derived from the selective fluorination and sulfonation of poly(styrene‐block‐1,3‐cyclohexadiene)

Diblock copolymers of polystyrene‐block‐(1,3‐cyclohexadiene) (PS‐b‐PCHD), with varied molecular weights and compositions, were synthesized by sequential polymerization of styrene and 1,3‐cyclohexadiene (CHD) initiated by sec‐butyllithium in cyclohexane in the presence of appropriate additives during formation of the PCHD block. The residual double bonds in the PCHD block were saturated by addition of in situ generated difluorocarbene and/or hydrogen to enhance thermal and chemical stability. The fluorinated and/or hydrogenated polydiene blocks were chemically stable, allowing for controlled sulfonation of the PS blocks using acetyl sulfate. ¹H NMR and FT‐IR characterization confirmed successful fluorination/hydrogenation and sulfonation of the respective blocks. The resulting amphiphilic block copolymers consist of a semiflexible fluorine‐containing hydrophobic block having a bridged double ring structure and a hydrophilic sulfonated PS block. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Influence of (1,3‐phenylene)bis(3‐methyl‐1‐phenyl pentylidene)dilithium initiator concentration on the modality of polybutadiene

The strong influence of (1,3‐phenylene)bis(3‐methyl‐1‐phenyl pentylidene)dilithium initiator (DLI) concentration on the modality of polybutadiene (PBd) in the presence of lithium s‐butoxide (s‐BuOLi) in benzene, at room temperature, has been studied. The quality of DLI has been evaluated by gas chromatography‐mass spectrometry (GC‐MS) and ¹H NMR. Keeping s‐BuOLi/C‐Li ratio (R) close to unity, at relatively high DLI concentrations (C > 7 × 10^?4 M), monomodal high 1,4‐PBds with polydispersity index less than 1.07 were obtained, whereas bimodal ones at lower concentrations (C < 6 × 10^?4 M). The effect of C‐Li concentration on the modality of PBd has been evaluated using size exclusion chromatography on samples taken during and at the end of the polymerization. Viscosity observations have also been used to further support the results. The bimodality of PBd has been attributed to partially terminated difunctional species because of the inevitable presence of protic impurities in the polymerization solution, although high vacuum technique was used, which becomes more significant at low initiator concentrations. Moreover, the strong influence of s‐BuOLi on the microstructure of PBd has been demonstrated by ¹H NMR. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A Facile Synthesis of Oxoindenothiazine and Dioxospiro(indene‐2,4′‐thiazine) Derivatives from (Substituted ethylidene)hydrazinecarbothioamides

(E)‐2‐[2‐(1‐Substituted ethylidene)hydrazinyl]‐5‐oxo‐9b‐hydroxy‐5,9b‐dihydroindeno[1,2‐d][1,3]‐thiazine‐4‐carbonitriles and (E)‐5‐oxo‐[(E)‐(1‐substituted ethylidene)hydrazinyl]‐2,5‐dihydroindeno[1,2‐d][1,3]thiazine‐4‐carbonitriles have been obtained from the reaction of 2‐(substituted ethylidene)hydrazinecarbothioamides with 2‐(1,3‐dioxo‐2,3‐dihydro‐1H‐inden‐2‐ylidene)propanedinitrile ( 1 ) in ethyl acetate solution. However, (Z)‐6′‐amino‐1,3‐dioxo‐3′‐substituted‐2′‐[(E)‐(1‐phenylethylidene)hydrazono]‐1,2′,3,3′‐tetrahydrospiro(indene‐2,4′‐[1,3]thiazine)‐5′‐carbonitriles were observed during the reaction of N‐substituted‐2‐(1‐phenylethylidene)hydrazinecarbothioamides with ( 1 ). The structure assignment of products has been confirmed on the basis of ¹H‐, ¹³C‐NMR, and mass spectrometry, as well as theoretical calculations.     

Cyclocopolymerization of 1,4‐pentadiene with ethene in the presence of group‐4 metallocenes

The behaviors of rac‐[CH₂(3‐tert‐butyl‐1‐indenyl)₂]ZrCl₂ ( 1 ) and Cp₂ZrCl₂ ( 2 ) activated by methylaluminoxane in ethene/1,4‐pentadiene copolymerization are compared. In the presence of 1 , inserted methylene‐1,3‐cyclobutane units, a large number of crosslinks, and a small number of methylene‐1,3‐cyclohexane units are obtained. Differently, a polyethene containing only 1,3‐cyclohexane rings is achieved with 2 as the catalytic precursor. Polymer microstructures are compared with those obtained with 1 and 2 in ethene/1,6‐heptadiene copolymerization, which leads only to polyethene containing cyclohexane rings. A tentative rationalization of the experimental data is reported. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5525–5532, 2006