Effective chemoselective deprotection of 3,4-dimethoxybenzyl (DMB) ethers in the presence of benzyl and p-methoxybenzyl (PMB) ethers by phenyliodine(III) bis(trifluoroacetate) (PIFA)

In this Letter, a selective deprotection of the alcohol protecting 3,4-dimethoxybenzyl (^3,4DMB) group is described. The hypervalent iodine(III) reagent phenyliodine bis(trifluoroacetate) (PIFA) is found to be an efficient reagent for the chemoselective deprotection of ^3,4DMB ethers in the presence of benzyl, p-methoxybenzyl, methoxymethyl, tert-butyldimethylsilyl, and tert-butyldiphenylsilyl ethers under mild conditions. This is the first example of the selective deprotection of the ^3,4DMB group from a hydroxy group with PIFA.     

Solvent‐Free One Pot Synthesis of 2‐aryl/Heteroarylbenzothiazoles Using Hypervalent Iodine (III) Reagents

In this article, an efficient, environmentally benign, one‐pot and simple synthesis of 2‐aryl/heteroarylbenzothiazoles by the reaction of 2‐aminothiophenol and aryl/heteroaryl aldehydes mediated by hypervalent iodine (III) reagents under solvent‐free condition at room temperature is demonstrated. All the reactions were carried out by grinding the reactants (2‐aminothiophenol and aryl/heteroaryl aldehydes) with hypervalent iodine (III) reagents in a mortar with pestle. Phenyliodine bistrifluoroacetate act as an efficient oxidizing reagent in comparison to iodobenzene diacetate in term of reaction time but yields are comparative. The advantages of this protocol are the one‐step procedure, mild reaction conditions, high yields of the products, and no side reactions.     

Alternative Strategies with Iodine: Fast Access to Previously Inaccessible Iodine(III) Compounds

Non‐iodinated arenes can be easily and selectively converted into (diacetoxyiodo)arenes in a single step under mild conditions by using iodine triacetates as reagents. The oxidative step is decoupled from the synthesis of hypervalent iodine(III) reagents, which can now be prepared conveniently in a one‐pot synthesis for subsequent reactions without prior purification. The chemistry of iodine triacetates was also expanded to heteroatom ligand exchanges to form novel inorganic hypervalent iodine compounds.     

Hypervalent Iodine(III)‐Catalyzed Balz–Schiemann Fluorination under Mild Conditions

An unprecedented hypervalent iodine(III) catalyzed Balz–Schiemann reaction is described. In the presence of a hypervalent iodine compound, the fluorination reaction proceeds under mild conditions (25–60 °C), and features a wide substrate scope and good functional‐group compatibility.     

Diastereoselective Radical Hydroacylation of Alkylidenemalonates with Aliphatic Aldehydes Initiated by Photolysis of Hypervalent Iodine(III) Reagents

Diastereoselective radical hydroacylation of chiral alkylidenemalonates with aliphatic aldehydes is realized by the combination of a hypervalent iodine(III) reagent and UV‐light irradiation. The reaction is initiated by the photolysis of hypervalent iodine(III) reagents under mild, metal‐free conditions, and is the first example of diastereoselective addition of acyl radicals to olefins to afford chiral ketones in a highly stereoselective fashion. The obtained optically active ketones are useful chiral synthons, as exemplified by the short formal synthesis of (?)‐methyleneolactocin.     

Direct cyanation of heteroaromatic compounds mediated by hypervalent iodine(III) reagents: In situ generation of PhI(III)-CN species and their cyano transfer

Hypervalent iodine(III) reagents mediate the direct cyanating reaction of a wide range of electron-rich heteroaromatic compounds such as pyrroles 1, thiophenes 3, and indoles 5 under mild conditions (ambient temperature), without the need for any prefunctionalization. Commercially available trimethylsilylcyanide is usable as a stable and effective cyanide source, and the reaction proceeds in a homogeneous system. The N-substituent of pyrroles is crucial to avoid the undesired oxidative bipyrrole coupling process, and thus a cyano group was introduced selectively at the 2-position of N-tosylpyrroles 1 in good yields using the combination of phenyliodine bis(trifluoroacetate) (PIFA), TMSCN, and BF3.Et2O at room temperature. In the reaction mechanism, cation radical intermediates of heteroaromatic compounds are involved as a result of single electron oxidation, and the key to successful transformations seems to depend on the oxidation potential of the substrates used. Thus, the reaction was also successfully extended to other heteroaromatic compounds having oxidation potentials similar to that of N-tosylpyrroles such as thiophenes 3 and indoles 5. However, regioisomeric mixtures of the products derived from the reaction at the 2- and 3-positions were obtained in the case of N-tosylindole 5a. Further investigation performed in our laboratory provided insights into the real active iodine(III) species during the reaction; the reaction is induced by an active hypervalent iodine(III) species having a cyano ligand in situ generated by ligand exchange reaction at the iodine(III) center between trifluoroacetoxy group in PIFA and TMSCN, and effective cyanide introduction into heteroaromatic compounds is achieved by means of the high cyano transfer ability of the hypervalent iodine(III)-cyano intermediates. In fact, the reaction of N-tosylpyrrole 1a with a hypervalent iodine(III)-cyano compound (e.g., (dicyano)iodobenzene 8), in the absence of TMSCN, took place to afford the 2-cyanated product 2a in good yield, and an effective preparation of the intermediates is of importance for successful transformation. 1,3,5,7-Tetrakis[4-{bis(trifluoroacetoxy)-iodo}phenyl]adamantane 12, a recyclable hypervalent iodine(III) reagent, was also comparable in the cyanating reactions as a valuable alternative to PIFA, affording a high yield of the heteroaromatic cyanide by facilitating isolation of the cyanated products with a simple workup. Accordingly, after preparing the active hypervalent iodine(III)-CN species by premixing of a recyclable reagent 12, TMSCN, and BF3.Et2O for 30 min in dichloromethane, reaction of a variety of pyrroles 1 and thiophenes 3 provided the desired cyanated products 2 and 4 in high yields. The iodine compound 13, recovered by filtration after replacement of the reaction solvent to MeOH, could be reused without any loss of activity (the oxidant 12 can be obtained nearly quantitatively by reoxidation of 13 using m-CPBA).     

Stereoselective synthesis of 5-7 membered cyclic ethers by deiodonative ring-enlargement using hypervalent iodine reagents

Stereoselective synthesis of 5-7 membered cyclic ethers was achieved by deiodonative ring-enlargement of cyclic ethers having an iodoalkyl substituent. The reaction took place readily under mild conditions using hypervalent iodine compounds and an acetoxy or a trifluoroacetoxy group was introduced into the rings depending on the hypervalent iodine reagent employed. The use of hexafluoroisopropanol (HFIP) as solvent is critical.     

First hypervalent iodine(III)-catalyzed C-N bond forming reaction: catalytic spirocyclization of amides to N-fused spirolactams

A protic solvent, 2,2,2-trifluoroethanol (CF(3)CH(2)OH), was successfully introduced into hypervalent iodine(III)-involved catalytic cycles as an effective solvent, and the first iodoarene-catalyzed intramolecular carbon-nitrogen bond forming reaction was achieved under strong acid-free and mild conditions.     

烯酸在碘化铵催化作用下的卤代内酯化反应

研究了不饱和烯酸在碘化铵催化作用下的溴代和氯代内酯化反应.通过该反应,4-戊烯酸等不饱和烯酸在催化剂碘化铵和氧化剂间氯过氧苯甲酸作用下很容易与溴化锂和氯化锂反应,常温下短时间内即可得到良好产率的溴/氯甲基γ-丁内酯化合物,从而建立了一个简单快速合成溴/氯甲基γ-丁内酯的新方法.考察了反应条件对反应的影响,提出了该反应是经过有机高价碘中间体而进行的反应机理.     

Dual Hypervalent Iodine(III) Reagents and Photoredox Catalysis Enable Decarboxylative Ynonylation under Mild Conditions

A combination of hypervalent iodine(III) reagents (HIR) and photoredox catalysis with visible light has enabled chemoselective decarboxylative ynonylation to construct ynones, ynamides, and ynoates. This ynonylation occurs effectively under mild reaction conditions at room temperature and on substrates with various sensitive and reactive functional groups. The reaction represents the first HIR/photoredox dual catalysis to form acyl radicals from α‐ketoacids, followed by an unprecedented acyl radical addition to HIR‐bound alkynes. Its efficient construction of an mGlu5 receptor inhibitor under neutral aqueous conditions suggests future visible‐light‐induced biological applications.     

Facile oxidative hydrolysis of acetals to esters using hypervalent iodine(III)/LiBr combination in water

The combination of (diacetoxy)iodobenzene (PhI(OAc)₂, DIB) and lithium bromide (LiBr) efficiently oxidized cyclic and acyclic acetals to the corresponding hydroxyalkyl carboxylic esters and simple esters in good to excellent yields. The merits of this reaction are that it employs commercially available and non-explosive hypervalent iodine(III) reagent, water as the solvent, a short reaction time, and mild reaction conditions.     

Electrophilic (phenylsulfonyl)difluoromethylation of thiols with a hypervalent iodine(III)-CF2SO2Ph reagent

A hypervalent iodine(III)-CF₂SO₂Ph compound (3) has been successfully prepared with selective nucleophilic reaction using PhSO₂CF₂SiMe₃ reagent, and this previously unkown compound 3 was found to act as a new electrophilic (phenylsulfonyl)difluoromethylation reagent for a variety of S-nucleophiles under very mild reaction conditions.     

Hypervalent iodine(III): selective and efficient single-electron-transfer (SET) oxidizing agent

In 1994, we first determined the single-electron-transfer (SET) oxidation ability of phenyliodine(III) bis(trifluoroacetate) (PIFA) toward phenyl ethers, affording the corresponding aromatic cation radicals. Since then, hypervalent iodine(III) has been utilized as a selective and efficient SET oxidizing agent that enables a variety of direct C-H functionalizations of aromatic rings in electron-rich arenes under mild conditions. We have now extended the original method to work in a series of heteroaromatic compounds such as thiophenes, pyrroles, and indoles. The investigations and results obtained since the start of this century are summarized in this article.     

Preparation of Heteroaromatic (Aryl)iodonium Imides as I−N Bond‐Containing Hypervalent Iodine

Hypervalent iodine(III) compounds containing iodine–nitrogen bonds are very attractive amination reagents in organic synthesis. Heteroaromatic (aryl)iodonium imides containing a iodine–nitrogen bond and a hypervalent iodine(III) atom were prepared from heteroarenes, bis(sulfon)imides and (diacetoxyiodo)arenes under mild conditions. These compounds were stable under air and in organic solvents, and could be easily purified by precipitation. X‐ray crystal structure analysis indicated that the structure of N‐pivaloyl indolyl(phenyl)iodonium bis(tosyl)imides and N‐pivaloyl indolyl(2‐butoxyphenyl)iodonium bis(tosyl)imides was a dimer with a T‐shaped geometry at the iodine atom linked to an indole group and a bis(tosyl)imide by a monomer unit. Moreover, the use of substituted iodoarenes facilitated the purification of some of the heteroaromatic (aryl)iodonium imides.     

Recyclable synthesis of mesityl iodonium(III) salts

An efficient protocol for C–H condensation of hypervalent iodine compounds toward arenes in fluoroalcohols has been applied to the recyclable preparation of mesityl iodonium(III) salts. The electrophilicities of [hydroxy(tosyloxy)iodo]mesitylene (MesI(OH)OTs) and iodomesitylene diacetate (MesI(OAc)₂) are suitably enhanced in 2,2,2-trifluoroethanol. A series of nucleophilic aromatic compounds react smoothly with MesI(OH)OTs and MesI(OAc)₂ or in situ hypervalent iodine(III) species, generated from iodomesitylene, to provide the target mesityl iodonium(III) salts in good yields at room temperature with broad functional group tolerance. This C–H condensation strategy merits high para-regioselectivities during the diaryliodonium(III) salt formation, but the major limitation in the case of low-reactive aromatic substrates is byproduct formation resulting from the self-condensation of the nucleophilic mesitylene ring in MesI(OH)OTs and MesI(OAc)₂.     

Metal‐Free CH Bond Activation of Branched Aldehydes with a Hypervalent Iodine(III) Catalyst under Visible‐Light Photolysis: Successful Trapping with Electron‐Deficient Olefins

Direct acyl radical formation of linear aldehydes (RCH₂‐CHO) and subsequent hydroacylation with electron‐deficient olefins can be effected with various types of metal and nonmetal catalysts/reagents. In marked contrast, however, no successful reports on the use of branched aldehydes have been made thus far because of their strong tendency of generating alkyl radicals through the facile decarbonylation of acyl radicals. Here, use of a hypervalent iodine(III) catalyst under visible light photolysis allows a mild way of generating acyl radicals from various branched aldehydes, thereby giving the corresponding hydroacylated products almost exclusively. Another characteristic feature of this approach is the catalytic use of hypervalent iodine(III) reagent, which is a rare example on the generation of radicals in hypervalent iodine chemistry.     

Metal‐Free C?H Bond Activation of Branched Aldehydes with a Hypervalent Iodine(III) Catalyst under Visible‐Light Photolysis: Successful Trapping with Electron‐Deficient Olefins

Direct acyl radical formation of linear aldehydes (RCH₂‐CHO) and subsequent hydroacylation with electron‐deficient olefins can be effected with various types of metal and nonmetal catalysts/reagents. In marked contrast, however, no successful reports on the use of branched aldehydes have been made thus far because of their strong tendency of generating alkyl radicals through the facile decarbonylation of acyl radicals. Here, use of a hypervalent iodine(III) catalyst under visible light photolysis allows a mild way of generating acyl radicals from various branched aldehydes, thereby giving the corresponding hydroacylated products almost exclusively. Another characteristic feature of this approach is the catalytic use of hypervalent iodine(III) reagent, which is a rare example on the generation of radicals in hypervalent iodine chemistry.     

An unexpected oxidation of unactivated methylene C-H using DIB/TBHP protocol

An in situ generated hypervalent iodine species, bis(tert-butylperoxy)iodobenzene, was used as a peroxy radical source for the oxidation of unreactive, remote, and isolated alkyl (cyclic or aliphatic) esters and amides to the corresponding keto compounds under very mild conditions.     

Iodine(III)-catalyzed benzylic oxidation by using the (PhIO)n/Al(NO3)3 system

Abstract

The first iodine(III)-based procedure for the benzylic oxidation of different arenes is described by using the (PhIO)_n/Al(NO₃)₃ system under catalytic conditions leading to the formation of the corresponding carbonyl derivatives. The method proceeds under mild, operationally simple, room temperature, short reaction times, and open flask conditions. In light of the organocatalysis relevance and the novelty of our protocol, we wish to communicate our initial results of this novel oxidation.