首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 74 毫秒
1.
将纳米硅粉分散于熔融的己内酰胺中,以NaOH为催化剂,2,4-甲苯二异氰酸酯为助催化剂,原位制备了纳米硅粉/MC尼龙6复合材料.用红外光谱、X射线衍射、场发射扫描电镜、热重分析仪和差示扫描量热仪对复合材料的界面结构和性能进行了研究.结果表明,纳米硅粉在尼龙6基体中具有较好的分散性,而且其与基体有比较强的界面作用,纳米硅粉促进了尼龙6的结晶,但是其对尼龙6的晶型结构没有产生明显的影响.  相似文献   

2.
用原位分散聚合法制备了一系列MC尼龙/纳米La2O3复合材料,研究了纳米La2O3用量对复合材料力学性能的影响,用SEM观察了La2O3粒子在MC尼龙基体中的分散情况,用XRD对复合材料的晶体结构进行了表征。SEM观察结果表明,当纳米La2O3用量小于1%时,纳米La2O3均匀分散于MC尼龙基体中,团聚情况很少,当纳米La2O3用量大于1%时,纳米La2O3开始团聚;XRD研究结果表明,纳米La2O3没有改变MC尼龙的结晶形态;力学性能的研究结果表明,随着纳米La2O3用量的增加,复合材料的拉伸强度、断裂伸长率、缺口冲击强度、弯曲强度和弯曲模量都呈先升后降的趋势,当纳米La2O3用量为0.5%时,复合材料的拉伸强度和断裂伸长率达到最大值,分别比MC尼龙提高17.9%和52.1%,当纳米La2O3的用量为1.0%时,复合材料的缺口冲击强度、弯曲强度和弯曲模量达到最大值,分别比MC尼龙基体提高36,6%.12.7%和16.3%。  相似文献   

3.
王玉花  程超 《化学研究》2011,22(3):51-55
将有机化的蒙脱土与尼龙6(PA6)在Haake共混机中共混,制备出尼龙6/蒙脱土纳米复合材料(PA6N);对尼龙6/蒙脱土纳米复合材料和纯尼龙6分别进行差示扫描量热法非等温结晶试验,以了解蒙脱土在尼龙6/蒙脱土纳米复合材料中的成核作用、扩大尼龙6在包装领域的应用范围.与此同时,采用偏光显微镜测定了样品的结晶形态;采用紫...  相似文献   

4.
尼龙纳米复合材料研究进展   总被引:1,自引:0,他引:1  
综述了尼龙纳米复合材料的制备方法、性能特点以及近几年来国内外对尼龙纳米复合材料产品开发进展情况。重点从纳米粒子对复合材料结晶行为的影响以及纳米粒子与尼龙界面相互作用两方面研究纳米粒子增强增韧尼龙的机理。并展望了尼龙纳米复合材料的应用前景。  相似文献   

5.
可分散性纳米SiO2/尼龙1010复合材料的结晶行为   总被引:3,自引:0,他引:3  
采用熔融共混法制备了可分散性纳米SiO2/尼龙1010复合材料.通过X射线衍射和差示扫描量热法对尼龙1010及其复合材料的结晶行为进行了研究.结果表明,SiO2的加入作为结晶的异相成核点,使复合材料的结晶温度升高,熔融温度降低,使其结晶度稍有降低;SiO2的加入并没有改变尼龙1010的结晶形态,只是使尼龙1010的晶格尺寸发生了一定程度的改变.  相似文献   

6.
马安彤  付超  楚慧颖  冉祥海  聂伟 《应用化学》2020,37(12):1411-1419
为了提高聚偏氟乙烯(PVDF)的压电性能,需要寻找有效的途径来提高PVDF的电活性相(β相)含量。 通过水热法成功合成了Ag、ZnO以及二者复合(Ag-ZnO)的3种类型纳米粒子,并与PVDF共混形成PVDF复合薄膜。 通过表征PVDF复合材料的形貌,结晶性能和压电性能,可以发现Ag-ZnO复合纳米粒子的协同作用可以有效提高PVDF的结晶性能和压电性能。 此外,通过单轴拉伸可以使得所有PVDF膜的β相含量得到进一步提高,其中拉伸后的PVDF/Ag-ZnO纳米颗粒(P-C)的β相物质的量分数最高,达到70.0%,最佳的压电系数(d33)达到了31.0 pC/N。  相似文献   

7.
通过微波水解法制备了ZnO柱撑皂石,并以其为加工助剂制备了聚乳酸(PLA)/ZnO柱撑皂石纳米复合材料.通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、对ZnO柱撑皂石及PLA/ZnO柱撑皂石纳米复合材料的结构进行了表征,并对其力学性能和热稳定性能进行了测试.微观结构分析表明,ZnO柱撑皂石呈现剥离状,并均匀分散在PLA基质中.力学性能研究表明0.3%ZnO柱撑皂石的加入有助于改善PLA复合材料的断裂伸长率.SEM分析表明PLA复合材料的断面发生明显改变,表现良好韧性;DSC结果显示纳米ZnO柱撑皂石可以降低复合材料的玻璃化转变温度、结晶温度,有助于提高PLA复合材料的结晶度,与XRD分析相吻合;热重分析表明ZnO柱撑皂石可以提高PLA复合材料的热稳定性.测试结果表明,ZnO柱撑皂石在PLA基质中起到了异相成核的作用,促进了PLA基质的结晶.  相似文献   

8.
利用型腔体积可控注塑发泡装备制备聚丙烯/无机纳米粒子微发泡复合材料,通过复合材料的流变行为和结晶行为,分析了无机纳米粒子对聚丙烯发泡行为的影响。结果表明:无机纳米粒子有促进气泡异相成核作用,同时无机纳米粒子引入可以提高聚丙烯黏弹响应和降温结晶起始温度,起到了抑制泡孔结构恶化的作用,显著改善了聚丙烯的泡孔结构;在聚丙烯材料中添加纳米CaCO3、纳米OMMT、纳米SiO2进行发泡,以PP/OMMT发泡材料的发泡质量最理想,其泡孔密度和尺寸分别为2×106个/cm3和24.2μm。  相似文献   

9.
尼龙6/蒙脱土纳米复合材料的等温结晶动力学研究   总被引:29,自引:0,他引:29  
用DSC法研究了熔体插层制备的尼龙6/蒙脱土纳米复合材料的等温结晶行为.结果表明,加入少量的蒙脱土可明显提高尼龙6的结晶速率,降低球晶径向生长的单位面积表面自由能.从Avrami方程和Hofman理论出发,得出蒙脱土纳米粒子的存在可明显改变尼龙6的结晶行为  相似文献   

10.
尼龙6/石墨纳米导电复合材料的制备与性能   总被引:30,自引:0,他引:30  
通过原位插层聚合制备了尼龙 6 /石墨纳米导电复合材料 ,其室温导电渗滤阈值为 =0 75vol% ,远远低于常规导电粒子填充的聚合物复合材料 .当石墨体积分数为 2 0vol%时 ,室温电导率可达 10 -4 S/cm .透射电镜研究表明 :由于石墨经高温膨胀后其片层被剥离导致了片状石墨粒子具有巨大的径厚比 ,经原位插层聚合其片层厚度进一步被剥离为几十个纳米 ,同时原位插层聚合使得石墨粒子能够均匀分散在尼龙 6基体中 ,因而导致了该导电复合材料的低渗滤阈值和高导电性能 .  相似文献   

11.
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.  相似文献   

12.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.  相似文献   

13.
The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.  相似文献   

14.
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.  相似文献   

15.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.  相似文献   

16.
17.
An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.  相似文献   

18.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

19.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

20.
Zhanhui Yang  Shiyi Yang  Jiaxi Xu 《Tetrahedron》2017,73(23):3240-3248
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号