Assessment of labelled products with different radioanalytical methods: study on 18F-fluorination reaction of 4-[18F]fluoro-N-[2-[1-(2-methoxyphenyl)-1-piperazinyl]ethyl-N-2-pyridinyl-benzamide (p-[18F]MPPF)

The serotonin receptor 5-HT_1A ligand 4-[¹⁸F]fluoro-N-[2-[1-(2-methoxyphenyl)-1-piperazinyl]ethyl-N-2-pyridinyl-benzamide (p-[¹⁸F]MPPF) was produced by a simplified method of Le Bars et al. Traditional oil bath heating was compared to microwave heating. Various radioanalytical methods, radio-Thin Layer Chromatography (TLC), High Pressure Liquid Chromatography (HPLC) and Mass Spectrometry (MS), were compared in the evaluation of the labelled product(s). The crude reaction mixture consisted of p-[¹⁸F]MPPF and 2–4 radioactive by-products eluting after the product fraction, and the reverse-phase HPLC method failed occasionally to separate p-[¹⁸F]MPPF from the radioactive by-product with close retention time. The heating method had no significant effect on the composition of labelled by-products. In LC-(ESI)-MS analysis of p-[¹⁸F]MPPF the labelled product was identified with m/z ratio of 435 ([M + H⁺]). The other HPLC fractions were measured to have following m/z ratios: (1) 327; 349; (675) (2) 402; 407/408; (791) and (3) 436, suggesting different kind of decomposition of the labelled product and/or the inactive precursor. The ion trap mass spectrometer was sufficient for the qualitative analysis of p-[¹⁸F]MPPF. However, differentiation of by-products arising from the decomposition of p-[¹⁸F]MPPF or from its precursor p-MPPNO₂ proved to be challenging.     

Synthesis and biological evaluation of 1-(4-(4-(4-[18F]fluorobenzyl)-1-piperazinyl)butyl)indolin-2-one as dopamine D4 receptor ligand

A potential dopamine D₄ receptor ligand, 1-(4-(4-(4-fluorobenzyl)-1-piperazinyl)butyl)indolin-2-one (4) was synthesized through a four-step process and its affinity and selectivity for dopamine D₂-like receptors was determined through in vitro receptor binding assay. [¹⁸F]4 was prepared using a one-pot two-step method with total radiochemical yield 21.2 % (decay-corrected). The molar radioactivity was around 135 GBq/μmol and the radiochemical purity was greater than 95.5 %. The partition coefficient (Log P) of [¹⁸F]4 was determined to be 2.10 ± 0.30 through octanol experiment. The in vivo biodistribution and the competitive distribution of [¹⁸F]4 in rat exposed that the tracer passes through blood–brain-barrier (BBB) and may specifically bind to D₄ receptor. Metabolite analysis revealed that there was no metabolism of [¹⁸F]4 in brain. Conclusively, these preliminary results demonstrated that [¹⁸F]4 shows promises as a radioligand for the in vivo study of dopamine D₄ receptor.     

1-[4-(二甲氨基)苯亚甲基氨基]-4-苯基硫脲的合成及手性晶体结构

对二甲氨基苯甲醛和苯基氨基硫脲缩合反应生成对二甲氨基苯甲醛缩氨基苯硫脲{1-[4-(dimethylamino)ben- zylidene]-4-phenylthiosemicarbazide}, 并从溶液中析出手性晶体. 元素分析、红外光谱、紫外光谱、核磁谱、质谱和X射线衍射测定其组成和结构. 晶体属正交晶系, P2₁2₁2₁空间群, a＝0.77038(14) nm, b＝1.1428(2) nm, c＝1.6726(3) nm, V＝1.4726(5) nm³, Z＝4, D_c＝1.346 g/cm³, F(000)＝632, μ＝0.219 mm^－1, 可观测点精修最终偏离因子: R＝0.0407, wR＝0.1157. 化合物的晶体结构和固态圆二色谱表明化合物在结晶过程中发生单一对映体的手性堆积.     

Enantioselective syntheses of no-carrier-added (n.c.a.) (s)-4-chloro-2-[f] fluorophenylalanine and (s)-(α-methyl) -4-chloro-2-[f]fluorophenylalanine

(S)-4-Chloro-2-fluorophenylalanine and (S)-(α-methy)-4-chloro-2-fluorophenylalanine were synthesized and labeled with no carrier added (n.c.a.) fluorine-18 through a radiochemical synthesis relying on the highly enantioselective reaction between 4-chloro-2-[¹⁸F]fluorobenzyl iodide and the lithium enolate of (2S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3-methyl-1,3-imidazolidine-4-one for (S)-4-chloro-2-[¹⁸F]fluorophenylalanine and (2S,5S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3,5-dimethyl-1,3-imidazolidine-4-one for (S)-(α-methyl) -4-chloro-2-[¹⁸F] fluorophenylalanine. Quantities of about 20–25 mCi were obtained at the end of sy nthesi s, ready for injection after hydrolysis and high performance liquid chromatography (HPLC) purification, with a radiochemical yield of 17%–20% corrected to the end of bombardment after a total synthesis time of 90–105 min from [¹⁸F] fluoride. The enantiomeric excesses were shown to be 97% or more for both molecules without chiral separation and the radiochemical and chemical purities were 98% or better.     

Determination of Total Radiochemical Purity of [18F]FDG and [18F]FET by High-Performance Liquid Chromatography Avoiding TLC Method

The goal of this work was to present two high-performance liquid chromatography (HPLC) method that could be applied for the determination of the total radioactive purity of 2-deoxy-2-[¹⁸F]fluoro-D-glucose ([¹⁸F]FDG) and O-(2-[¹⁸F]fluoroethyl)-L-tyrosine ([¹⁸F]FET). The separation of [¹⁸F]fluoride ions, [¹⁸F]FET and [¹⁸F]FET intermediate was accomplished on LiChrosper RP-18, 250?×?4 mm, 5 µm (Merck) analytical column. For mobile phase 10 mM potassium dihydrogen phosphate buffer at pH7 (A) and acetonitrile (B) was used: 0–2 min: 15% B; 2–12 min: 85% B; 12–15 min: 15% B, respectively. Analysis of [¹⁸F]FDG was performed using LiChrosper 100 NH₂, 250?×?4.5 mm, 5 µm (Merck) analytical column. The initial mobile phase composition was 10 mM KH₂PO₄ buffer (pH7) and acetonitrile (15:85, v/v) and the acetonitrile ratio was decreased to 15% at 2 min after the sample injection and held for 5 min. Complete elution of [¹⁸F]fluoride ions from stationary phases could be achieved by adding 10 mg/mL K[¹⁹F]F to radioactive samples in a ratio 1:1 during the sample preparation. Recovery of [¹⁸F]fluoride ions ranged from 99.5 to 100.6%. The validation of the developed methods showed good results for linearity (r²?=?0.9981–0.9996), specificity (R_S?=?3.7–10.2), repeatability (%Area RSD_%?=?1.2–4.3%) and limit of quantitation (LOQ?=?1.6–4.5 kBq). During the cross-validation similar radiochemical purity values were obtained by the novel HPLC methods and thin layer chromatography performed according to the recommendations of the Ph. Eur. monographs.

     

1-[18F]Fluoroethyleneglycol-2-nitroimidazoles, a new class of potential hypoxia PET markers

Summary 1-[2-(2-Fluoroethoxy)ethyl]-2-1H-nitroimidazole (3a), 1-{2-[2-(2-fluoroethoxy)ethoxy]ethyl}-2-1H-nitroimidazole (3b) and 1-(2-{2-[2-(2-fluoroethoxy)ethoxy]ethoxy}ethyl)-2-1H-nitroimidazole (3c) were synthesized in a two step sequence.Coupling the ditosylate of di-, tri- or tetraethylene glycol with 2-nitroimidazole followed by fluoride substitution afforded the reference compounds in high yield and¹⁸F labeling gave the corresponding markers in 70-82% radiochemical yield.     

Synthesis and Extraction Property of Novel Thiacalix[4]biscrown: Thiacalix[4]-1,3-2,4-aza-biscrown

The novel thiacalix[4]-1,3-2,4-aza-biscrown 3 in 1,3-alternate conformation, was facilely prepared by “1 + 2” cyclocondensation of p-tert-butylthiacalix[4]arene tetrahydrazide derivative 2 with o-phthalaldehyde in yield of 78%. The liquid–liquid extraction experiment showed that compound 3 was excellent receptor for zwitterionic α-amino acids and soft cations Ag⁺ and Hg²⁺. The extraction percentage of methionine was as high as 78%.     

A Facile Synthesis of Novel 9-Methyl[1, 2, 3]Selenadiazoles[4, 5-b]Quinoline and 9-Methyl[1, 2, 3]Thiadiazole[4, 5-b]Quinoline as a New Class of Antimicrobial Agents

2-chloro-4-methyl quinoline 2 on condensation with semicarbazide hydrochloride gave its semicarbazone. This on reaction with SeO ₂ and SOCl₂ yielded a new class of novel selenadiazoles 4 and thiadiazoles 5, respectively. The structure of all the compounds were elucidated on the basis of elemental analysis, IR, ¹ H NMR, and the mass spectral data. Some derivatives of 9-methyl[1, 2, 3]selenadiazole[4, 5-b] quinoline and 9-methyl[1, 2, 3]thiadiazole [4, 5-b]quinoline have been screened for antimicrobial activities.     

Pr5F[SiO4]2[SeO3]3: Another Complex Fluoride Oxosilicate Oxoselenate(IV)

During attempts to synthesize lanthanoid(III) fluoride oxoselenates(IV) with the simple composition MF[SeO₃], not only Pr₃F[SeO₃]₄, but also Pr₅F[SiO₄]₂[SeO₃]₃ appeared as pale green crystalline by‐products in the case of praseodymium. Pr₅F[SiO₄]₂[SeO₃]₃ crystallizes triclinically in space group P$\bar{1}$ (no. 2) with a = 701.14(5), b = 982.68(7), c = 1286.79(9) pm, α = 70.552(3), β = 76.904(3), γ = 69.417(3)° and Z = 2. The five crystallographically different Pr³⁺ cations on the general positions 2i show coordination numbers of eight and nine. [(Pr1)O₈]^13– and [(Pr2)O₈]^13– polyhedra are connected to$\bar{1}$ {[(Pr1, 2)₂O₁₂]^18–} chains along the [100] direction. [(Pr3)O₇F]^12–, [(Pr4)O₈F]^14– and [(Pr4)O₈F]^14– polyhedra generate [F(Pr3, 4, 5)₃O₁₉]^30– units about their central F^– anion in triangular Pr³⁺ coordination. These units form $\bar{1}$ {[F(Pr3, 4, 5)₃O₁₆]^24–} strands, again running parallel to [100]. Their alternating connection with the $\bar{1}$ {[(Pr1, 2)₂O₁₂]^18–} chains results in $\bar{1}$ {[Pr₅O₂₀F]^26–} sheets parallel to the (001) plane. Like in the already known related compound Er₃F[SiO₄][SeO₃]₂, a three‐dimensional network $\bar{1}$ {[Pr₅O₁₇F]^20–} is achieved without the contribution of both the tetravalent silicon and selenium components. However, two Si⁴⁺ and three Se⁴⁺ cations forming tetrahedral [SiO₄]^4– and ψ¹‐tetrahedral [SeO₃]^2– units with all O^2– anions guarantee the charge balance. The formation of Pr₅F[SiO₄]₂[SeO₃]₃ was observed when praseodymium sesquioxide (Pr₂O₃: in‐situ produced from Pr and Pr₆O₁₁ in a molar ratio of ³/₁₁:⁴/₁₁),praseodymium trifluoride (PrF₃) and selenium dioxide (SeO₂) in 1:1:3 molar ratios were reacted with CsBr as fluxing agent for five days at 750 °C in evacuated fused silica (SiO₂) ampoules.     

无溶剂法合成杯[4]芳烯星形化合物

以对苯二甲醛、乙酸酐为原料合成对苯二甲醛单缩醛, 接着与间苯二酚反应, 制备了含醛基杯[4]芳烯. 利用季戊四醇与含醛基杯[4]芳烯反应, 进而再与3-[4-(2,5-二氧杂环戊基)苯基]-9-[4-二(甲羰氧基)甲基苯基]-2,4,8,10-四氧杂螺环[5.5]十一烷反应, 合成了杯[4]芳烯星形化合物, 收率为65.2%. 产品结构经 IR, ¹H NMR, MS 和元素分析进行了表征.     

Copper complexes of 1-[(2-carboxyethyl)benzene]-3-[2-pyridine]triazene

The triazenide, 1-[(2-carboxyethyl)benzene]-3-[2-pyridine]triazene (HL), has been synthesized. In the presence of Et₃N, the reaction of HL with Cu(OAc)₂·H₂O or CuCl₂·2H₂O gives the tetranuclear copper(II) complexes {Cu₄(L)₂(μ₂-OH)₂(OAc)₄} 1 and {Cu₄L₄(μ₄-O)Cl₂} 2, respectively. The X-ray crystal structures of both complexes have been obtained. Magnetic studies indicate significant antiferromagnetic coupling between the copper(II) centers for both complexes, with coupling constants (J) of −493.4 cm⁻¹ for 1 and −165 cm⁻¹ for 2.     

1-[4-(二甲氨基)苯亚甲基氨基]-4-苯基硫脲的另一个手性对映体晶体结构

对-二甲氨基苯甲醛和苯基氨基硫脲缩合反应生成1-[4-(二甲氨基)苯亚甲基氨基]-4-苯基硫脲(DMB), 产物能从溶液中析出单一手性对映体晶体. 用单晶X射线衍射技术测定了它的绝对构型, 晶体属正交晶系, P2₁2₁2₁空间群, a＝0.7870(2) nm, b＝1.1560(2) nm, c＝1.6668(3) nm, V＝1.5164(5) nm³, Z＝4, D_c＝1.307 g/cm³, F(000)＝632, μ＝0.213 mm^－1, 2557个可观测点[I＞2s(I)]精修的最终残差因子: R＝0.0409, wR＝0.1061, Flack参数为0.00(9), 能够确定绝对构型. 化合物的晶体结构和大宗粉末样品的固体圆二色谱表明化合物在结晶过程中发生单一对映体的手性堆积.     

Radiosynthesis of [18F]-5-[2-(2-chlorophenoxy)phenyl]-1,3,4-oxadiazole-2-yl-4-fluorobenzoate: A labeled ligand for benzodiazepine receptors

5-[2-(2-Chlorophenoxy)phenyl]-1,3,4-oxadiazole-2-yl-4-fluorobenzoate 6a, the non-classic benzodiazepine ligand, has been shown to elicit a significant anticonvulsant activity against pentylenetetrazole-induced convulsion. In order to perform biological studies, we decided to prepare the [¹⁸F]-labeled compound. This compound was prepared in no-carrier-added (n.c.a) form from 5-[2-(2-chlorophenoxy)phenyl]-1,3,4-oxadiazole-2-yl-4-N,N,N-trimethylanilinium triflate 5 in one step at 125 °C in Kryptofix 2.2.2/[¹⁸F] and DMSO as the solvent followed by column chromatography. The synthesis took 20 minutes with an overall radiochemical yield of 70-75% (EOS) and a specific activity about 74 GBq/mmole and chemical-radiochemical purity more than 95%. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .     

Synthesis, Conformational Studies and Inclusion Properties of Tetrakis[(2-pyridylmethyl)oxy]thiacalix[4]arenes

An attempted O-alkylation of the flexible macrocycle 1with 2-(chloromethyl)pyridine in the presence of Cs₂CO₃ under THF reflux afforded a mixture of twoconformers of tetra-O-alkylated product 4a in a ratio of 91:9 (cone-4a:1,2-alternate-4a)in 70% yield, while other possible isomers were not observed. In the case of Na₂CO₃, there was no reaction product,only the starting compound 1, whereasonly monoalkylated compound 3 was obtained when usingK₂CO₃ as the base. The distribution of cone conformer decreased in the case of O-alkylation of tetraol 1with 4-(chloromethyl)pyridine or benzyl bromide in the presence of Cs₂CO₃ in comparison with that ofO-alkylation with 2-(chloromethyl)pyridine, while the 1,2-alternate conformer increased in the same sequence. The larger Cs⁺might increase the contribution of the metal template effect, which can hold the 2-pyridylmethyl group(s) and theoxide group(s) on the same side of the tetrathiacalix[4]arene 1 through the cation-O^- and -N-interaction in the caseof O-alkylation of tetraol 1 with 2-(chloromethyl)pyridine.Only when the template metal can hold the 2-pyridyl group(s) andthe oxide group(s) on the same side of the tetrathiacalix[4]arene is the conformation immobilized to thecone. The template effect of the cesium cation plays an important role in this alkylation reaction. The structuralcharacterization of these products is also discussed.The two-phase solvent extraction data indicated thattetrakis[(2-pyridylmethyl)oxy]thiacalix[4]arenes 4a show strong Ag⁺ affinity and a high Ag⁺ selectivity wasobserved for cone-4a. A good Job plot proves 1:1 coordination of cone-4a with Ag⁺ cation.¹H-NMR titration of cone-4a with AgSO₃CF₃ also clearly demonstrates that a 1:1complex is formed with retention of the original symmetry. In contrast, the 1,2-alternate-4a can form a 2:1 metal/thiacalix[4]arene complex and the two metal-binding sites display positive allostericity. The conformational changes ofpyridine moiety from the original outward orientation of the ring nitrogen to the inside orientation toward thethiacalixarene cavity were observed in the processof Ag⁺ complexation.     

New approaches to synthesis of tris[1,2,4]triazolo[1,3,5]triazines

Thermal cyclization of 3-R-5-chloro-1,2,4-triazoles (R = Cl, Ph) afforded 2,6,10-tri-R- tris[1,2,4]triazolo[1,5-a:1′,5′c:1″,5″-e][1,3,5]triazines 5 (R = Ph) and 7 (R = Cl). These compounds are first representatives of this class of heterocycles, whose structures were unambiguously established. Treatment of these compounds with nucleophiles (H₂O/NaOH, NH₃) results in the triazine ring opening to give compounds consisting of three 1,2,4-triazole rings linked in a chain. For example, treatment of cyclic compound 5 with aqueous alkali affords 3-phenyl-1-3-phenyl-1-(3-phenyl-1H-1,2,4-triazol-5-yl)-1,2,4-triazol-5-yl-1H-1,2,4-triazol-5-one. Treatment of 3,7,11-triphenyltris[1,2,4]triazolo[4,3-a:4′,3′c:4″,3″-e][1,3,5]triazine (2) with HCl/SbCl₅ leads to the triazine ring opening giving rise to 5-(3-chloro-5-phenyl-1,2,4-triazol-4-yl)-3-phenyl-4-(5-phenyl-1H-1,2,4-triazol-3-yl)-1,2,4-triazole. Thermal cyclization of the latter produces 3,7,10-triphenyltris[1,2,4]triazolo[1,5-a:4′,3′c:4″,3″-e][1,3,5]triazine (13). Thermolysis of both cyclic compound 2 and cyclic compound 13 is accompanied by the Dimroth rearrangement to yield 3,6,10-triphenyl-tris[1,2,4]triazolo[1,5-a:1′, 5′-c:4″,3″-e][1,3,5]triazine (14). Compounds 13 and 14 are the first representatives of cyclic compounds with this skeleton. ¹³C NMR spectroscopy allows the determination of the isomer type in a series of tris[1,2,4]triazolo[1,3,5]triazines.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 706–712, March, 2005.     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday     

Synthesis and Antimycobacterial Activity of New 2-Hydroxy- N -(3-oxo-1-thia-4-azaspiro[4.4]non-4-yl)/(3-oxo-1-thia-4-azaspiro[4.5]dec-4-yl)-2,2-diphenylacetamide Derivatives

2-Hydroxy-2,2-diphenylacetohydrazide (2), cyclic ketones, and mercaptoalkanoic acids were converted into 2-hydroxy-N-(3-oxo-1-thia-4-azaspiro[4.4]non/[4.5]dec-4-yl)-2,2-diphenylacetamide derivatives (3, 4) in a one pot procedure. Compounds 3 and 4 were tested for in vitro antimycobacterial activity against M. tuberculosis H37Rv. The compounds were found to provide 0–86% inhibition of mycobacterial growth in the primary screen conducted at 6.25 μg/cm³.     

Synthesis and reactivity with M(II) (M=Co and Cu) chloride of 1-[(2-carboxyethyl)benzene]-3-[benzothiazole]triazene

Reaction of ethyl anthranilate, sodium nitrite, and 2-aminobenzothiazole produces a new triazenide compound, 1-[(2-carboxyethyl)benzene]-3-[benzothiazole]triazene (HL), which has been characterized by X-ray crystallography and NMR spectrum. In the presence of Et₃N, reaction of HL and CuCl₂?·?2H₂O or CoCl₂?·?6H₂O in THF/methanol affords a tetranuclear copper(II) complex [Cu₄L₄(µ-OMe)₄]?·?4THF (1) and a cobalt(III) complex [CoL′₃] (2) (L′ is 1-[benzothiazole] triazene ion), accompanied by C–N bond cleavage of HL. They are characterized by X-ray crystallography and magnetic susceptibility measurement. Magnetic studies indicate significant antiferromagnetic coupling between the copper(II) centers for 1. The value obtained for the coupling constant J is ?585?cm^?1.     

Syntheses of 4-(benzo[b]furan-2 or 3-yl)- and 4-(benzo[b]-thiophen-3-yl)piperidines with 5-HT2 antagonist activity

The syntheses of 4-(benzo[b]furan-3-yl)piperidines, 4-(benzo[b]furan-2-yl)piperidines and 4-(benzo[b]thiophen-3-yl)piperidines with 5-HT₂ antagonist activity are described. Reaction of 1-acetyl-4-(2,4-difluorobenzo-yl)piperidine 2 with methyl glycolate gave methyl 6-fluoro-3-(1-acetylpiperidin-4-yl)benzo[b]furan-2-carboxylate 3 , which was converted to 2-[2-[4-(benzo[b]furan-3-yi)piperidin-1-yl]ethyl-5,6,7,8-tetrahydro-1,2,4-triazolo-[4,3-a]pyridin-3(2H)-one hydrochloride 9 . Analogous benzo[b]furans 17a-d and benzo[b]thiophenes 10a,b and 18a were prepared by a similar method. Cyclization of 4-fluoro-2-(4-pyridinylmethoxy)acetophenones 20a,b afforded 4-(benzo[b]furan-2-yl)pyridines 21a,b , which were converted to 2-[2-[4-(benzo[b]furan-2-yl)-piperidin-1-yl]ethyl-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3-a]pyridin-3(2H)-one hydrochlorides 24a,b. Among them, benzo[b]furans 9 and 17a,d and benzo[b]thiophenes 10 and 18a showed potent 5-HT₂ antagonist activity in vitro.