Comparison of extraction techniques for gas chromatographic determination of volatile carbonyl compounds in alcohols

Two extraction procedures, i.e. conventional liquid-liquid extraction (LLE) and liquid solid-phase microextraction (SPME) for extraction of the oximes formed after derivatization of carbonyl compounds with o-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine (PFBHA) in alcoholic solutions have been compared. The limit of detection for LLE followed by GC-ECD determination of C1-C6 was in the range of 0.23-3.3 microg/L, whereas for liquid SPME 0.005-0.33 microg/L. Both methods elaborated can be applied to the determination of carbonyl compounds present in spirits and alcoholic beverages.     

Ion trap mass spectrometry affords advances in the analytical and atmospheric chemistry of 2-hydroxy-2-methylpropanal,a proposed photooxidation product of 2-methyl-3-buten-2-Ol

In the western United States, in areas where emissions of the biogenic hydrocarbon, 2-methyl-3-buten-2-ol (MBO) are high, MBO contributes significantly to the oxidative capacity of the atmosphere. Hydroxyl radical oxidation of MBO can play an important role in forming tropospheric ozone, and MBO reaction products may contribute to the formation of secondary organic aerosols [1-3]. Although 2-hdyroxy-2-methylpropanal was tentatively identified as a product from the reaction of MBO with .OH in indoor chamber studies, the identity of the compound was not confirmed due to the lack of an authentic standard. Further, no data exists on the atmospheric generation and fate of 2-hydroxy-2-methylpropanal in the ambient environment. Herein, we provide further evidence that 2-hydroxy-2-methylpropanal is generated by .OH reaction with MBO by identifying 2-hydroxy-2-methylpropanal in an indoor chamber experiment and in ambient air sampled in the Blodgett Forest, where MBO emissions are high. We analyzed 2-hydroxy-2-methylpropanal by using a method that relies on O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) and bis-(trimethylsilyl) trifluoroacetamide (BSTFA) derivatization along with ion-trap mass spectrometry. Tentative identification of 2-hydroxy-2-methylpropanal was possible by using knowledge gained in this study regarding the mass spectrometry of PFBHA-BSTFA derivatives of carbonyls with primary, secondary, and tertiary -OH groups, and ado- and keto-acids. The identification was confirmed by comparing the methane CI mass spectra and relative gas chromatographic retention time obtained by analyzing 2-hydroxy-2-methylpropanal in a sample extract and a synthesized authentic standard. Since the standard became available at the end of this study (after all samples were analyzed), we also developed a method for semi-quantification of 2-hydroxy-2-methylpropanal, with a detection limit of 27 pptv in air. We used the method to provide the first ambient air measurements of 2-hydroxy-2-methylpropanal. The analyte is not commercially available, and hence other researchers who have not synthesized an authentic standard can employ the method.     

Analysis of carbonyl compounds via headspace solid-phase microextraction with on-fiber derivatization and gas chromatographic-ion trap tandem mass spectrometric determination of their O-(2,3,4,5,6-pentafluorobenzyl)oxime derivatives

An improved method for the analysis of carbonyls is described utilizing a headspace solid-phase microextraction (HS-SPME) step and on-fiber derivatization with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) hydrochloride. Thermal desorption of the oxime derivatives formed on the fiber is followed by gas chromatographic separation coupled to an ion trap tandem mass spectrometer (GC-ITMS). Selecting specific fragment ions within the electron ionization (EI(+)) mass spectra of these oxime derivatives as precursor ions for MS-MS fragmentation provides a suitable method for the target analysis of individual carbonyl classes, such as alkanals, (E)-2-alkenals, (E,E)-2,4-alkadienals, and others. Retention indices on polar as well as on apolar stationary phases along with EI(+) mass spectra patterns are presented for a large set of oxime derivatives, giving valuable information needed for unambiguous assignment of substances in complex sample matrices. The fast sample preparation and derivatization step via HS-SPME can be automated and is applicable to a variety of biological samples and foodstuffs, allowing rapid and sensitive screening analyses of important aldehydic biomarkers and aroma active compounds.     

Coupled two-step microextraction devices with derivatizations to identify hydroxycarbonyls in rain samples by gas chromatography-mass spectrometry

Coupling a two-step liquid-phase microextraction (LPME) with O-(2,3,4,5,6-pentafluorobenzyl)-hydroxylamine/bis(trimethylsilyl)trifluoroacetamide (PFBHA)/(BSTFA) derivatization was developed to detect hydroxycarbonyls in rainwater samples using gas chromatography-mass spectrometry (GC-MS). LPME provides a fast and inexpensive pre-concentration, and miniaturized extraction to analyze the target compounds rainwater samples. Derivatization techniques offer a clear method to identify target compounds. The hydroxycarbonyls were determined using two-step derivatizations. Dynamic-LPME was applied in the first derivatization, and head-space single drop derivatization was employed in the second reaction. The LODs varied from 0.023 to 4.75 microg/l. The calibration curves were linear for at least two orders of magnitude with R2>or=0.994. The precision was within 6.5-12%, and the relative recoveries in rainwater were more than 89% (the amount added ranged from 0.3 to 15 microg/l). A field sample was found to contain 2.54 microg/l of hydroxyacetone and 0.110 microg/l of 3-hydroxy-2-butanone. Hydroxyacetone was also detected in one of the tested samples at a concentration of 2.39 microg/l.     

Determination of carbonyl compounds in beer by derivatisation and headspace solid-phase microextraction in combination with gas chromatography and mass spectrometry

Headspace solid-phase microextraction (SPME) followed by gas chromatography and mass spectrometry was applied for quantification of 41 chemically diverse carbonyl compounds in beer. Therefore, in-solution derivatisation with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) combined with SPME was optimised for fibre selection, PFBHA concentration, extraction temperature and time and ionic strength. Afterwards, the method was calibrated and validated successfully and extraction efficiency was compared to sampling with on-fibre derivatisation. In-solution derivatisation enabled the detection of several compounds that were poorly extracted with on-fibre derivatisation such as 5-hydroxymethylfurfural, acrolein, hydroxyacetone, acetoin, glyoxal and methylglyoxal. Others, especially (E)-2-nonenal, were extracted better with on-fibre derivatisation.     

Determination of carbonyl compounds in pool water with O-(2,3,4,5,6-pentafluorobenzyl)hydroxyamine hydrochloride and gas chromatographic-tandem mass spectrometric analysis

To avoid microbiological decay pool water is disinfected, a procedure which results into a lot of disinfection by-products, like carbonyl compounds, as well as a large number of others. The carbonyl compounds dissolved in pool water were derivatisized with O-(2,3,4,5,6-pentafluorobenzyl)hydroxyamine hydrochloride (PFBHA) and extracted using n-hexane. Measuring with the help of GC-electron-capture detection is hardly possible because of interferents like halogenated organics. Another method to detect the PFBHA derivates is the use of tandem mass spectrometry. Calibration ranges and precision are applicable and sufficient to determine carbonyl compounds in pool water.     

GC/ITMS measurement of carbonyls and multifunctional carbonyls in PM2.5 particles emitted from motor vehicles.

A method was developed and tested to identify and quantitate carbonyls and multifunctional carbonyls in fine particulate matter (PM2.5; <2.5 microm aerodynamic diameter). The method relies on ultrasonic extraction of particulate matter on filters at -8 degrees C; derivatization with O-(2,3,4,5,6-pentafluorobenzyl) hydroxylamine (PFBHA), and PFBHA along with bis (trimethylsilyl) trifluoroacetamide (BSTFA); and detection of the derivatives by gas chromatography/ion trap mass spectrometry. Ultrasonic extraction of model compounds from enriched particles was affected by solvent polarity (water > methylene chloride > toluene-isopropanol (2 + 1, v/v). Water provided the highest recovery for dihydroxy acetone, pyruvic acid, and hydroxy acetone, compared to methylene chloride, and toluene-isopropanol. Lowering the ultrasonication bath temperature from 0 degrees to -8 degrees C improved the recoveries of the less water soluble and more volatile species-methacrolein, methyl vinyl ketone, 2,3-butanedione, and tolualdehyde. The power of the method was demonstrated by identification and quantitation of carbonyls and multifunctional carbonyls in sample extracts of fine particulate matter (PM2.5) collected in the Caldecott tunnel, CA. The identities of crotonaldehyde, 2,3-butanedione, glyoxal, 9H-fluoren-9-one, glycolaldehyde, glyoxylic acid, levulinic acid, and 3-hydroxybenzaldehyde were confirmed by comparing the relative retention time and mass spectra of the analyte in the sample extract with an authentic standard. Quantitation of crotonaldehyde, glyoxal, 2,3-butanedione, glyoxylic acid, and levulinic acid was accomplished. This is the first report of glyoxylic acid, levulinic acid, and 3-hydroxybenzaldheyde in PM2.5 particles sampled in a roadway tunnel. It is also the first report of a C10 carbonyl with the molecular formula of C10H16O2, a hydroxy carbonyl with the molecular formula of C17H21NO2, and a hydroxy or dihydroxy carbonyl with the molecular formula of C16H14O2 or C9H10O3. The high-molecular weight hydroxy carbonyls, which were found only in the heavy-duty (diesel) bore, may be tracers of diesel emissions in air.     

Comparison of extraction techniques for gas chromatographic determination of volatile carbonyl compounds in alcohols

Two extraction procedures, i.e. conventional liquid-liquid extraction (LLE) and liquid solid-phase microextraction (SPME) for extraction of the oximes formed after derivatization of carbonyl compounds with o-(2,3, 4,5,6-pentafluorobenzyl) hydroxylamine (PFBHA) in alcoholic solutions have been compared. The limit of detection for LLE followed by GC-ECD determination of C₁–C₆ was in the range of 0.23–3.3 μg/L, whereas for liquid SPME 0.005–0.33 μg/L. Both methods elaborated can be applied to the determination of carbonyl compounds present in spirits and alcoholic beverages. Received: 26 September 2000 / Revised: 14 January 2001 / Accepted: 16 January 2001     

Development of SPME on-fiber derivatization for the sampling of formaldehyde and other carbonyl compounds in indoor air

Solid-phase microextraction on-fiber derivatization applied to carbonyl compounds is known, but application to indoor air is poorly developed and the methods deserve to be complemented and optimized. In this work, two derivatization reagents, pentafluorophenylhydrazine and o-2,3,4,5,6-(pentaflurobenzyl)hydroxylamine (PFBHA), and three fiber coatings were tested in order to select the best combination. As Carboxen-based coatings were proven to induce the formation of by-products during the thermal desorption step, a polydimethylsiloxane–divinylbenzene fiber in association with PFBHA was finally chosen. The study of the derivatization kinetics showed that the reaction of PFBHA with carbonyl compounds was instantaneous, except for acetone. Analyses were performed by gas chromatography coupled with flame ionization detection and mass spectrometry. For 5 min fiber exposure, the limits of detection are below 0.5 μg m^-3 in selected ion monitoring mode, the reproducibility was 15 % on average, and the linearity of the calibration curves was satisfactory. For on-site application, the influence of air humidity and the conditions in which the impregnated fibers were stored were studied. It is possible to store the fibers for 3 days before and for at least 2 days after sampling. The relative humidity of air was shown to have no influence on solid-phase microextraction sampling in the range from 0 to 70 %. For formaldehyde, the method was compared with sampling on 2,4-dinitrophenylhydrazine cartridges, and the first results showed good agreement. Finally, the method was applied to three different indoor environments to check its feasibility.     

Determination of stale-flavor carbonyl compounds in beer by stir bar sorptive extraction with in-situ derivatization and thermal desorption-gas chromatography-mass spectrometry

A method for the determination of stale-flavor carbonyl compounds including E-2-octenal, E-2-nonenal, E,Z-2,6-nonadienal and E,E-2,4-decadienal in beer was developed using stir bar sorptive extraction (SBSE) with in-situ derivatization followed by thermal desorption-GC-MS analysis. The derivatization conditions with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine and the SBSE conditions--sampling mode, salt addition, sample volume, polydimethylsiloxane volume (sample/polydimethylsiloxane phase ratio) and extraction time--were examined. The method showed good linearity over the concentration range from 0.1 to 10 ng ml(-1) for all analytes and the correlation coefficients were higher than 0.9993. The limits of detection ranged from 0.021 to 0.032 ng ml(-1) for all analytes. The recoveries (98-101%) and precision (RSD 2.4-7.3%) of the method were examined by analyzing beer samples fortified at the 0.5-ng ml(-1) level. The method was successfully applied to low-level concentration samples.     

Synthesis of the O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine oximes of selected carbonyl compounds and their determination by liquid chromatography with ultraviolet detection

The aims were to develop a liquid chromatographic (LC) method with ultraviolet detection (UVD) for O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine hydrochloride (PFBHA) O-oximes of common aldehydes and ketones, and to define the steric limits of the synthetic reaction used to make the PFBHA O-oxime standards for gas chromatographic (GC) and LC methods. Ten new O-oximes were synthesized with the new optimized method, and their purities were demonstrated by GC/electron-capture detection (ECD), GC/mass spectrometry (MS), ultraviolet spectroscopy, infrared spectroscopy, and proton and 13C-nuclear magnetic resonance spectroscopy. Ketones substituted at both beta-carbons relative to the carbonyl carbon, like diisobutyl ketone and 2,4-hexanedione, showed lower synthetic yields by wet chemistry methods. A new C18 reverse-phase LC method with UVD at 200 nm and acetonitrile-water in both the isocratic and gradient-elution modes was then developed to sensitively resolve a mixture of 13 pure PFBHA O-oximes. The detection limit was near 100 ng O-oxime/mL or about 14-50 ng aldehyde/mL and the least quantifiable limits were near 500 ng/mL or about 70-250 ng aldehyde/mL, with lower limits for glyoxal, methylglyoxal, benzaldehyde, and acetophenone. Carbonyl compounds in 500 mL water samples were then determined in distilled water and tap water by gradient elution. Vapors of n-valeraldehyde and acrolein generated in gas bags at concentrations near occupational guidelines were also sampled, desorbed, and then determined by either isocratic or gradient elution at 200 or 254 nm within 30-45 min.     

类固醇类环境内分泌干扰物羟基衍生化研究

采用气相色谱-质谱联用技术(GC-MS),以N,O-双三甲基硅基三氟乙酰胺为衍生化试剂,系统研究了4种类固醇类环境内分泌干扰物雌酮(E1)、17β-雌二醇(E2)、雌三醇(E3)、17α-乙炔基雌二醇(EE2)的羟基衍生化行为,考察了BSTFA用量、衍生化温度和时间对类固醇类环境内分泌干扰物衍生化效果的影响以及衍生化产物的稳定性、标准曲线、仪器检出限等,并对衍生化产物特征碎片离子的裂解机理进行了解释.结果表明:对于100 μL 0.01 g/L标准混合溶液,BSTFA的最佳用量为25 μL;衍生化过程不需要加热,常温下(20 ℃)下反应10 min就可取得最佳的衍生化效果;衍生化产物的稳定性较好,在-20 ℃下放置48 h,相对响应因子RRF基本没有降低.在优化的实验条件下,各待测物具有良好的线性相关性,E1和E2的检出限为0.3 μg/L,EE2和E3的检出限为5 μg/L.     

Determination of β-blockers and β-agonists using gas chromatography and gas chromatography-mass spectrometry--a comparative study of the derivatization step

There is a growing demand for the rapid screening of multiple β-blockers and β-agonists in a single analytical run in clinical toxicology, antidoping control, forensic and environmental science. Although GC-MS is very often used to determine pharmaceuticals from these groups of drugs, the literature data on the derivatization and MS analysis of mixtures of these compounds is limited. This paper compares and evaluates derivatization procedures for the determination of six β-blockers (acebutolol, atenolol, metoprolol, nadolol, propranolol, pindolol) and two β-agonists (salbutamol, terbutaline) using GC techniques. Nineteen different derivatizing reagents (nine of them used for the first time with almost all the drugs) were employed in order to obtain a single derivative for each target compound with the greatest effectiveness of this reaction. Trimethylsilylation, tert-butyldimethylsilylation, acylation (e.g. trifluoroacetylation), combined trimethylsilylation and acylation, and the formation of cyclized silyl derivatives were carried out and the mass spectra (EI, 70 eV) recorded. The influence of the reaction time and temperature on these procedures was investigated. Additionally, the effects of the type of solvent and the amount of added trimethylchlorosilane (TMCS) on the silylation of the target compounds using N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) were tested. Among of the five mentioned above derivatization procedures applied - trimethylsilylation was found to be the most effective for derivatizing the analytes. The best results were obtained with a 1:1 (v/v) mixture of 99% BSTFA+1% TMCS and ethyl acetate at 60 °C for 30 min. The MS data for different types of β-blocker and β-agonist derivatives is presented. The information in this paper is valuable for scientists working on the determination of β-blockers and β-agonists in biological and environmental matrices.     

N-(2-acetyl-1,3-indandione-1-hydrazone)trialkylammonium iodides as a new group of reagents for the carbonyl group

Monohydrazones of N-(2-acetyl-1,3-indandione)trialkylammonium iodides have been synthesized and used as reagents for the carbonyl group. Aldehydes, ketones, keto-acids and cyclic ketones react with these compounds, producing a yellow colour. Carbonyl compounds can be identified by the absorption spectrum of their derivatives with these reagents.     

Determination of misoprostol free acid in human breast milk and serum by gas chromatography/negative ion chemical ionization tandem mass spectrometry

To study an expected transition of misoprostol from human blood into breast milk, a novel method for the determination of its active metabolite misoprostol acid (MPA) was developed. MPA was determined in serum and breast milk samples by an isotope dilution assay using gas chromatography/negative ion chemical ionization tandem mass spectrometry (GC/NICI-MS/MS). After addition of (15S)-15-methylprostaglandin E(2) (15-methyl-PGE(2)) as an internal standard, MPA was extracted from both matrices using a reversed-phase cartridge. The prostanoids were derivatized with O-2,3,4,5,6-pentafluorobenzylhydroxylamine hydrochloride (PFBHA) and 2,3,4,5,6-pentafluorobenzyl bromide (PFBB) to the pentafluorobenzyl oxime (PFBO)-pentafluorobenzyl ester (PFB) derivatives. The sample was subjected to thin-layer chromatography with ethyl acetate-hexane (1 : 1 (v/v)) as the developing solvent. The corresponding zone was extracted. After derivatization to the trimethylsilyl ether, MPA was determined by GC/NICI-MS/MS using the [molecule (M) - pentafluorobenzyl (PFB)](-) ([P](-)) ions as precursor in the negative ion chemical ionization mode. The product ions used for quantification were [P - 2TMSOH - C(6)F(5)CH(2)OH](-) (MPA) and [P - 2TMSOH - C(6)F(5)CH(2)OH - CO(2)](-)(15-methyl-PGE(2)), respectively. The limit of quantification for MPA was approximately 1 pg ml(-1) in breast milk and serum samples. The correlation coefficients of the calibration curves for MPA were r > 0.997 in the 0.5-2000 pg ml(-1) range for both tested matrices.     

Analysis of aldehydes via headspace SPME with on-fiber derivatization to their O-(2,3,4,5,6-pentafluorobenzyl)oxime derivatives and comprehensive 2D-GC-MS

A method for the analysis of the homologous series of alkanals, (E)-2-alkenals, and (E,E)-2,4-alkadienals is described utilizing a headspace solid-phase microextraction (HS-SPME) step and on-fiber derivatization with O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBHA) hydrochloride. Oxime derivatives formed on the fiber are desorbed in the gas chromatographic injector and analyzed by comprehensive 2-D GC coupled to quadrupole MS (GC x GC-qMS). Selecting specific fragment ions within the electron impact mass spectra of the oxime derivatives provides a suitable method for the target analysis of these aldehyde classes, which furthermore benefits from the increased separation efficiency by GC x GC. The analysis of higher molecular weight aldehydes is described in wine and grape seed oil as examples. Quantification of the aldehydes utilizes a stable isotope dilution analysis (SIDA) assay with octan-d(16)-al as isotopomeric internal standard. Besides the selectivity and sensitivity of aldehyde analysis using PFBHA derivatives, critical aspects on background level contamination and repeatability of the sample preparation method are discussed. Optimization of GC x GC-qMS parameters allowed a considerable saving of the cryogenic medium, involving additional (unmodulated) conditioning runs, rendering the method more amenable to routine analysis.     

Development of a headspace GC/MS analysis for carbonyl compounds (aldehydes and ketones) in household products after derivatization with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine.

Carbonyl compounds (aldehydes and ketones) are suspected to be among the chemical compounds responsible for Sick Building Syndrome and Multiple Chemical Sensitivities. A headspace gas chromatography/mass spectrometry (GC/MS) analysis for these compounds was developed using derivatization of the compounds into volatile derivatives with o-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine (PFBOA). For GC/MS detection, two ionization modes including electron impact ionization (EI) and negative chemical ionization (NCI) were compared. The NCI mode seemed to be better because of its higher selectivity and sensitivity. This headspace GC/MS (NCI mode) was employed as analysis for aldehydes and ketones in materials (fiber products, adhesives, and printed materials). Formaldehyde was detected in the range of N.D. (not detected) to 39 microg/g; acetaldehyde, N.D. to 4.1 microg/g; propionaldehyde, N.D. to 1.0 microg/g; n-butyraldehyde, N.D. to 0.10 microg/g; and acetone, N.D. to 3.1 microg/g in the samples analyzed.     

Rapid qualitative analysis of 2 flavonoids,rutin and silybin,in medical pills by direct analysis in real‐time mass spectrometry (DART‐MS) combined with in situ derivatization

Direct analysis in real‐time mass spectrometry (DART‐MS) with in situ silylation was used for the rapid analysis of the flavonoids silybin ((2R,3R)‐3,5,7‐trihydroxy‐2‐[3‐(4‐hydroxy‐3‐methoxyphenyl)‐2‐hydroxymethyl‐2,3‐dihydrobenzo[1,4]dioxin‐6‐yl]chroman‐4‐one) and rutin (quercetin‐3‐O‐rutinoside). Three different derivatization reagents, hexamethyldisilazane/trimethylchlorosilane/pyridine (HMDS/TMCS/pyridine), N,O‐bis(trimethylsilyl)acetamide/trimethylchlorosilane/N‐trimethylsilyimidazole (BSA/TMCS/TMSI), and N,O‐bis(trimethylsilyl)trifluoroacetamide/trimethylchlorosilane (BSTFA/TMCS), were applied. Silybin and rutin were detected with various degrees of silylation, and the formation of dimers with pyridine and imidazole was also observed. HMDS/TMCS/pyridine was the best choice for the DART‐MS analysis of silybin, and BSA/TMCS/TMSI was the most effective for the detection of rutin. The effects of the DART source temperature on desorption, ionization, in‐source fragmentation, dimer formation, and hydrolysis of the trimethylsilyl groups were also studied. In addition, the collision‐induced dissociation properties of the derivatized silybin and rutin were explored. With our in situ silylation method, the derivatized bioactive compounds in intact medical pills could also be detected by DART‐MS.     

Analysis of aldehydes and ketones from beer as O-(2,3,4,5,6-pentafluorobenzyl)hydroxylamine derivatives

O-(2,3,4,5,6-pentafluorobenzyl)Hydroxylamine (PFBOA) was used as a derivatization reagent for carbonyl compounds in beer. Derivatization was carried out in aqueous solution without extraction or concentration of the sample. The effects of antifoam agent, reaction time and pH on the reaction efficiency were studied. Antifoam RD, a silicone polymer-based antifoam reagent, was the best antifoaming agent since it did not cause interferences. Reaction time studies showed that the yield of aldehydes increased up to 12 hr and then decreased slightly. The yield of 3-hydroxybutanone, a test compound for ketones, increased throughout the 48 hr test period. The natural pH of beer (ca. 4.5) was favourable for the determination of carbonyl compounds as PFBOA derivatives. Higher pH values caused yield losses and some compounds, such as butanedione, 2,3-pentanedione and 5-hydroxymethyl-2-furfural, could not be measured at all in neutral or basic conditions. Carbonyl compounds were identified by GC-MS, using three different ionization techniques, electron impact ionization, chemical ionization, and negative chemical ionization. The formation of the protonated molecules by ammonia chemical ionization and formation of the negative molecular ions and [M - HF](-.) ions by negative chemical ionization permitted reliable identification of the various carbonyl compounds studied. Sixteen carbonyl compounds from the 32 standard compounds were identified in beer and 11 of the most significant were quantitated using GC-ECD. Reproducibility of quantitation for beer samples was good, the relative standard deviations varied between 2.7 and 6.7 %. The estimated detection limits of the PFBOA derivatives of the carbonyl compounds in beer varied in the range of 0.01-1 microg/dm(3).     

Iridium-catalyzed transfer hydrogenation of alpha,beta-unsaturated and saturated carbonyl compounds with 2-propanol.

The selective transfer hydrogenation of alpha,beta-unsaturated carbonyl compounds to saturated ones was achieved by the use of 2-propanol as a hydrogen donor under the influence of catalytic amounts of [Ir(cod)Cl](2), 1,3-bis(diphenylphosphino)propane (dppp), and Cs(2)CO(3). Thus, a variety of conjugated enones were allowed to react with 2-propanol in the presence of the [Ir(cod)Cl](2)/dppp/Cs(2)CO(3) system to give the corresponding saturated carbonyl compounds in good to excellent yields without formation of allylic alcohols. Both dppp and Cs(2)CO(3) were essential components to achieve the reduction satisfactorily. Additionally, the reduction of carbonyl compounds to alcohols was also promoted by the same catalytic system. When the reaction of a 1:1 mixture of a conjugated ketone and a saturated ketone with 2-propanol was carried out in the presence of [Ir(cod)Cl](2) combined with dppp and Cs(2)CO(3), the reduction of the alpha,beta-unsaturated ketone was found to take place in preference to that of the saturated ketone.