Cationic polyelectrolytes. IV. Kinetic study of the reaction of acrylic polymers containing tertiary amine groups with halogenated compounds in dipolar aprotic solvents

The reaction kinetics of halogenated compounds with tertiary amine groups attached at an acrylic macromolecular chain have ben studied. Three acrylic polymers were used. Two of them have mainly a structural unit of N, N-dimethylaminopropylacrylamide and the third is poly(N,N-dimethylaminoethylmethacrylate). Dimethylformamide, dimethylacetamide, and dimethylsulfoxide (DMSO) were used as dipolar aprotic solvents. Benzyl chloride and allyl chloride were considered as halogenated compounds with increased reactivity. The reaction kinetics depend on the polymer and halogenated-compound structures as well as the nature of the solvent. In the most of the cases the reactions carried out on polymers are accompanied by self-accelerating processes, with the exception of DMSO, which obviously has normal second-order kinetics. The reaction of polymers containing units of N,N-dimethylaminopropylacrylamide are compared with one having a low molecular weight, for instance N,N′-bis(3-dimethylaminopropyl)glutaramide.     

Conformational statistics of polymer chain terminally attached to wall (III) —NRW model loop chain

When the two end groups of a linear polymer chain are absorbed on a solid surface, the polymer chain forms the “loop” conformation. Investigation has been made on the conformational statistics of a model loop chain by the normal random walk (NRW) on a lattice confined in the half-infinite space. Based on the conformational distribution function of the NRW model tail chain, it is easy to deduce an analytical formula expressing the conformational number of the model loop chain. It was found that the ratio of the conformational number of the model loop chain to that of the free chain varies with the power functionN ^-2/3 when the chain lengthN→οο. The same result -was obtained by means of the recursion equation. The ratio of the mean square end-to-end distanceh ² for the model loop chain to its mean square bond lengthl ² is 2N/3. Compared with the free chain with the same lengthN, the mean square end-to-end distance of the model loop chain contracts to a certain extent. The basic relationships deduced were supported by the exact enumeration and Monte Carlo simulations. Project supported by the National Natural Science Foundation of China.     

Water-soluble copolymers. X. Copolymers of acrylamide with N-(1,1-dimethyl-3-oxybutyl)acrylamide and N,N-dimethylacrylamide: Solution properties

Dilute solution properties of copolymers of acrylamide (AM) with N-(1,1-dimethyl-3-oxybutyl)acrylamide (DAAM) and with N,N-dimethylacrylamide (DMAM) have been studied as a function of composition, temperature, time, and added electrolytes sodium chloride and calcium chloride. Unlike the AM-DMAM copolymers, the AM-DAAM copolymers show solution viscosity increases in the presence of added NaCl and CaCl₂ and decreases with increasing temperature which are related to copolymer composition. The unusual viscosity behavior of the DAAM-AM copolymers is suspected to be due to chain extension resulting from intramolecular hydrogen bonding and other cooperative associations along the macromolecular backbone.     

Synthesis of poly(Nε-phenoxycarbonyl-l-lysine) by polycondensation of activated urethane derivative and its application for selective modification of side chain with amines

We report a methodology for the synthesis of Nε-phenoxycarbonyl-protected poly(l -lysine) on the side chain by chain growth polycondensation of Nα,Nε-bis(phenoxycarbonyl)-l -lysine proceeded through the selective elimination of phenol and CO₂ from the Nα phenoxycarbonyl moiety at 50 °C in N,N-dimethylacetamide in the presence of a primary amine used as an initiator. After optimization of reaction condition, the addition of acetic acid during polycondensation proved effective for the realization of the predicted molecular weight and narrow dispersity of the corresponding polypeptide by adjusting the feed ratio of monomer to the amine initiator because of the suppression of interchain coupling that occurs between the amino terminus of poly(l -lysine) and the Nε-phenoxycarbonyl group on the polymer side chains. Furthermore, taking advantage of the potentially reactive Nε-phenoxycarbonyl moiety on the side chain, post-polymerization modification was effectively achieved by the nucleophilic reaction of amine compounds including primary, secondary, and aromatic amines through the formation of urea linkage, providing a useful platform for synthesis of selective side chain functionalization of poly(l -lysine) samples. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2522–2530     

Molecular modeling of polymers: I. Correct and efficient enumeration of intrachain conformational energetics

Polymer conformational analyses can require being able to model the intramolecular energetics of a very long (infinite) chain employing calculations carried out on a relatively short chain sequence. A method to meet this need, based upon symmetry considerations and molecular mechanics energetics, has been developed. Given N equivalent degrees of freedom in a linear polymer chain, N unique molecular groups are determined within the chain. A molecular unit is defined as a group of atoms containing backbone rotational degrees of conformational freedom on each of its ends. The interaction of these N molecular groups, each with a finite number of nearest neighbors, properly describe the intramolecular energetics of a long (infinite) polymer chain. Thus, conformational energetics arising from arbitrarily distant neighbor interactions can be included in the estimation of statistical and thermodynamic properties of a linear polymeric system. This approach is called the polymer reduced interaction matrix method (PRIMM) and the results of applying it to isotactic polystyrene (I-PS) are presented by way of example.     

Cationic polyelectrolytes. II. Amination of chloromethylated polystyrene with hydroxyalkylic secondary amines

The reaction of chloromethylated polystyrene with methyl(2- hydroxyethyl)amine and butyle (2-hydroxyethyl)amine was studied kinetically. The reaction of benzyl chloride with these amines was also investigated for comparison. N,N-dimethylformamide and dioxane were used as solvents. The reactions of benzyl chloride with the two amines in these solvents took place according to normal kinetics of the second order. Reaction kinetics depend on the nature of the amine and solvent in Chloromethylated polystyrene reactions. In dioxane the self-accelerating effect of the reaction for β ? 0.5 is apparent. Steric hindrance of the reaction, beginning with a conversion degree of about 75%, wss observed for butyl(2-hydroxyethyl)amine in N,N-dimethylformamide. This self-accelerating effect is observed in dioxane at the same reaction degree. The activation energies and frequency factors were calculated for the amination of benzyl chloride and chloromethylated polystyrene with the two amines in N,N-dimethylformamide and dioxane.     

ORD and CD studies of poly[(S)(−)-N-α-methylbenzylethylenimine]

The advantages of chiral N-substituted polyethylenimines for the chiroptical study of macromolecular conformations in solution have been considered. Poly[(S)(?)-N-α-methylbenzylethylenimine] (poly-3) and five model compounds have been obtained and their chiroptical properties studied. The cyclic dimer and tetramer of imine 3 are suitable models for the chiroptical study of configurational and conformational behaviour of randomly coiled and helical poly-3 in solution. Unlike the disordered poly-3 in acidified solvents and the configurational models in various solvents, helical poly-3 in hydrocarbon solvents has positive optical rotation and positive CD-band of the tertiary amine chromophore at 223 nm. The appearance of this inherently chiral chromophore of the helix explains the observed changes of the sign and values of the optical rotation of poly-3 in various solvents which are mainly caused by conformational transformations of the main chain. The presence of helical conformations of poly-3 in solution are also confirmed by optical rotation data of stereocopolymers and the concentration dependence data of ORD curves of poly-3. This conclusion agrees with NMR and i.r.-data.     

Quaternary ammonium polyelectrolytes. III. Kinetic studies of amination of chloromethylated polystyrene with tertiary amines

The amination kinetics of benzyl chloride and chloromethylated polystyrene with three tertiary amines were studied: N-2-hydroxyethyl-dimethylamine, N,N-bis(2-hydroxyethyl)-methylamine, and triethylamine in N,N-dimethylformamide. The amination of chloromethylated polystyrene takes place with two reaction rate constants K₁ and K₂. K₂ is higher than K₁; hence there is a self-accelerating effect. This phenomenon is due to the influence of the positive electrostatic field of the macroion chain on amines that are nucleophilic reactants. The magnitude of the self-accelerating effect given by the K₂/K₁ ratio depends on the substituent volume of the nitrogen atom of the amine molecule.     

Partial Molar Volumes of Cobalt(III) Complexes. Part 3: Homologous Series of Aminopentaamminecobalt(III) Complexes

Partial molar volumes (V ₂°) have been determined at infinite dilution in aqueous solution at 20 °C for a series of octahedral N₆-coordinated cobalt(III) species having five-coordinated ammonia ligands along with an N-coordinated linear alkyl amine whose alkyl chain was varied from ethylamine to octylamine. The experimental values for V ₂° are consistent with the relative sizes of the ligands but show increasing deviations from those predicted by computer modeling, as the size of the cation increases, presumably due to the void space of the cation that increases with the size of the amine ligand. The value of the partial molar volume at infinite dilution increased by about 16 mL⋅mol⁻¹ with each added methylene group.     

Cationic polyelectrolytes. I. Soluble polymers prepared from reaction of chloromethylated polystyrene with tris(2-hydroxythyl)amine

The reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine in N,N-dimethylformamide is described for the conditions to prepare soluble reaction products. The groups of the quaternary ammonium salt, which appear in the first stage of the reaction, transpose to the amino-ether groups. The reaction was followed by elementary analysis, IR and ¹H-NMR spectra, and viscosimetric measurements for nondialyzed and dialyzed samples. The presence of the tertiary amine groups on obtained polymers was also shown by titration. The polymers from the reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine reacted easily with benzyl chloride.     

Miniemulsion polymerization of styrene using well-defined cationic amphiphilic comblike copolymers as the sole stabilizer

Well-defined, positively charged, amphiphilic copolymers containing long alkyl side chains were used as stabilizers in the miniemulsion polymerization of styrene. The copolymers were prepared by controlled free-radical copolymerization of styrene and vinyl benzyl chloride using either the reversible addition-fragmentation chain transfer method or TEMPO-mediated polymerization. The benzyl chloride moities were modified by two different long alkyl chain tertiary amines (N,N-dimethyldodecyl amine and N,N-dimethylhexadecyl amine) to yield the amphiphilic copolymers with vinylbenzyl dimethyl alkyl ammonium chloride units. Owing to their high structural quality, only a small amount of these copolymers was required to stabilize the latex particles (0.5–2 wt% vs styrene). Moreover, in the absence of any hydrophobic agent, the amphiphilic comblike copolymer preserved the colloidal stability of both the initial liquid miniemulsion and the final latex. Ill-defined, analogous copolymers were synthesized by conventional free-radical polymerization and in comparison, exhibited poor stabilization properties.     

From poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) triblock copolymer to poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) hydrogels: Synthesis and rapid deswelling and reswelling behavior of hydrogels

Poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide)‐block‐poly(N‐isopropylacrylamide) (PNIPAAm‐b‐PEO‐b‐PNIPAAm) triblock copolymer was synthesized via the reversible addition‐fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process with xanthate‐terminated poly(ethylene oxide) (PEO) as the macromolecular chain transfer agent. The successful synthesis of the ABA triblock copolymer inspired the preparation of poly(N‐isopropylacrylamide)‐block‐poly(ethylene oxide) (PNIPAAm‐b‐PEO) copolymer networks with N,N′‐methylenebisacrylamide as the crosslinking agent with the similar approach. With the RAFT/MADIX process, PEO chains were successfully blocked into poly(N‐isopropylacrylamide) (PNIPAAm) networks. The unique architecture of PNIPAAm‐b‐PEO networks allows investigating the effect of the blocked PEO chains on the deswelling and reswelling behavior of PNIPAAm hydrogels. It was found that with the inclusion of PEO chains into the PNIPAAm networks as midblocks, the swelling ratios of the hydrogels were significantly enhanced. Furthermore, the PNIPAAm‐b‐PEO hydrogels displayed faster response to the external temperature changes than the control PNIPAAm hydrogel. The accelerated deswelling and reswelling behaviors have been interpreted based on the formation of PEO microdomains in the PNIPAAm networks, which could act as the hydrophilic tunnels to facilitate the diffusion of water molecules in the PNIPAAm networks. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel half‐sandwich η5‐Cp *–rhodium(III) and η5‐Cp *–ruthenium(II) complexes bearing bis(phosphino)amine ligands and their use in the transfer hydrogenation of aromatic ketones

Two new half‐sandwich η⁵‐Cp*–rhodium(III) and η⁵‐Cp*–ruthenium(II) complexes have been prepared from corresponding bis(phosphino)amine ligands, thiophene‐2‐(N,N‐bis(diphenylphosphino)methylamine) or furfuryl‐2‐(N,N‐bis(diphenylphosphino)amine). Structures of the new complexes have been elucidated by multinuclear one‐ and two‐dimensional NMR spectroscopy, elemental analysis and IR spectroscopy. These Cp*–rhodium(III) and Cp*‐ruthenium(II) complexes bearing bis(phosphino)amine ligands were successfully applied to transfer hydrogenation of various ketones by 2‐propanol. Copyright © 2013 John Wiley & Sons, Ltd.     

Structural studies of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine hetero‐scorpionate copper complexes

The structures of five compounds consisting of (prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine complexed with copper in both the Cu^I and Cu^II oxidation states are presented, namely chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(I) 0.18‐hydrate, [CuCl(C₁₅H₁₇N₃)]·0.18H₂O, (1), catena‐poly[[copper(I)‐μ₂‐(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ⁵N,N′,N′′:C²,C³] perchlorate acetonitrile monosolvate], {[Cu(C₁₅H₁₇N₃)]ClO₄·CH₃CN}_n, (2), dichlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) dichloromethane monosolvate, [CuCl₂(C₁₅H₁₇N₃)]·CH₂Cl₂, (3), chlorido{(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II) perchlorate, [CuCl(C₁₅H₁₇N₃)]ClO₄, (4), and di‐μ‐chlorido‐bis({(prop‐2‐en‐1‐yl)bis[(pyridin‐2‐yl)methylidene]amine‐κ³N,N′,N′′}copper(II)) bis(tetraphenylborate), [Cu₂Cl₂(C₁₅H₁₇N₃)₂][(C₆H₅)₄B]₂, (5). Systematic variation of the anion from a coordinating chloride to a noncoordinating perchlorate for two Cu^I complexes results in either a discrete molecular species, as in (1), or a one‐dimensional chain structure, as in (2). In complex (1), there are two crystallographically independent molecules in the asymmetric unit. Complex (2) consists of the Cu^I atom coordinated by the amine and pyridyl N atoms of one ligand and by the vinyl moiety of another unit related by the crystallographic screw axis, yielding a one‐dimensional chain parallel to the crystallographic b axis. Three complexes with Cu^II show that varying the anion composition from two chlorides, to a chloride and a perchlorate to a chloride and a tetraphenylborate results in discrete molecular species, as in (3) and (4), or a bridged bis‐μ‐chlorido complex, as in (5). Complex (3) shows two strongly bound Cl atoms, while complex (4) has one strongly bound Cl atom and a weaker coordination by one perchlorate O atom. The large noncoordinating tetraphenylborate anion in complex (5) results in the core‐bridged Cu₂Cl₂ moiety.     

In situ synthesis of mononuclear copper(II) complexes of the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine

Two mononuclear copper complexes, {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}(3,5‐dimethyl‐1H‐pyrazole‐κN²)(perchlorato‐κO)copper(II) perchlorate, [Cu(ClO₄)(C₅H₈N₂)(C₁₂H₁₉N₅)]ClO₄, (I), and {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}bis(3,5‐dimethyl‐1H‐pyrazole‐κN²)copper(II) bis(hexafluoridophosphate), [Cu(C₅H₈N₂)₂(C₁₂H₁₉N₅)](PF₆)₂, (II), have been synthesized by the reactions of different copper salts with the tripodal ligand tris[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (TDPA) in acetone–water solutions at room temperature. Single‐crystal X‐ray diffraction analysis revealed that they contain the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (BDPA), which cannot be obtained by normal organic reactions and has thus been captured in the solid state by in situ synthesis. The coordination of the Cu^II ion is distorted square pyramidal in (I) and distorted trigonal bipyramidal in (II). The new in situ generated tridentate BDPA ligand can act as a meridional or facial ligand during the process of coordination. The crystal structures of these two compounds are stabilized by classical hydrogen bonding as well as intricate nonclassical hydrogen‐bond interactions.     

The reactions of some pyraiiylideneiminium salts with amines. II

The iminium salt, N,N-dimethyl-N-[2-(2-phenyl-4H-l-benzopyran-4-ylidene)ethylidene] imin-ium perchlorate ( 3 ), reacts with secondary amines by exchanging the dimethylimino group for the added amine. Primary amines also reacted with 3 in the same manner. The bis iminium salts, N,N,N',N'-tetramethyl-N,N'-[2-(2-phenyl-4H-l-benzopyran-4-ylidene)-1,3-propanediylidene]-bis(immium perclilorate) ( 4 ) and the corresponding thiapyran derivative ( 5 ), react with ammonia to give 5-dimethylamino-2-phenyl-5H-1-benzopyrano[3,4-c]pyridine ( 10 ) and the thia analog 11 . The reactions of 4 and 5 with primary amines give 3-alkyl-5-dimethylamino-2-phenyl-5H-l-beiizopyrano[3,4-c]pyridinium perclilorate salts or the corresponding thiapyrano compounds. Compounds 4 and 5 react with secondary amines by exchanging the dimethylimino groups with the secondary amine and addition of the amine at the 2-position of the pyran or thiapyran ring.     

A Study of N-Butyl-(all-trans-retinylidene)amine and Its Protonated Species by 1H- and 13C-NMR. Spectroscopy

The Schiff base of all-trans-retinal was investigated in organic solution by ¹H- and ¹³C-NMR. at high field. Complete assignment of the ¹H-NMR. peaks of N-butyl-(all-trans-retinylidene)amine ( 2 ) and the N-butyl-(all-trans-retinylidene)-ammonium ion ( 3 ) was achieved by INDOR (internuclear double resonance). The vicinal proton coupling constants of the polyene chain show that the π-bond orders remain unchanged in N-butyl-(all-trans-retinylidene)amine relative to all-trans-retinal ( 1 ), but change towards larger π-delocalization in the N-butyl-(all-trans-retinylidene)ammonium ion. At ?-61° only one isomer of N-butyl-(all-trans-retinylidene)ammonium was observed. This was shown to be trans at the imine linkage and independent of the solvent. The trifluoroacetic acid counter-ion can approach the positive charge of the N-atom in the weakly polar solvent dichloromethane but not in the leveling solvent methanol. In dichloromethane the nature of the 1:1 complex is a H-bonded (O^?…H-N⁺) ion-pair whose rate of breaking and forming is rapid at RT. Strong stabilization of the ion-pair resulted from homo-conjugation with a second molecule of trifluoroacetic acid. Excess of acid efficiently diminished the isomerization rate at the C,N-bond.     

Study on the Mechanism of the Radiation-Induced Chain Oxidation of N,N,N,N-Tetramethyl-4,4′-diaminodiphenylmethane by Tetrabromomethane in Poly(vinyl chloride) Films

Kinetics and mechanism of the radiation-induced chain oxidation of N,N,N,N-tetramethyl-4,4-diaminodiphenylmethane (Am) by tetrabromomethane in poly(vinyl chloride) (PVC) films were studied by ESR and optical spectroscopy. The quantitative analysis of the ESR spectra of PVC films containing Am and CBr₄ irradiated with -rays at 77 K was performed. The nature of radical species involved in the chain process was established. It was shown that the heating of the films after their irradiation at 77 K resulted in the formation of free radicals Am^·, which initiated the chain oxidation of amine with a chain length of 100. The kinetic features of the chain oxidation–reduction reactions occurring in vacuum and in the presence of oxygen were compared.     

Molecular building blocks for solid‐state chalcogenides: solvothermal synthesis of [Mn(en)3]Te4 and [Fe(en)3]2(Sb2Se5)

Two new molecular metal chalcogenides, tris­(ethyl­enedi­amine‐N,N′)­manganese(II) tetratelluride, [Mn(C₂H₈N₂)₃]Te₄, (I), and bis­[tris­(ethyl­enedi­amine‐N,N′)­iron(II)] penta­seleno­diantimonate(III), [Fe(C₂H₈N₂)₃]₂(Sb₂Se₅), (II), containing the isolated molecular building blocks Te₄^2? and Sb₂Se₅^4?, have been synthesized by solvothermal reactions in an ethyl­enedi­amine solution at 433 K. The anion Te₄^2? in (I) is a zigzag oligometric chain with Te—Te bond lengths in the range 2.709–2.751 Å. There is a very short contact [3.329 (1) Å] between a pair of neighboring Te₄^2? anions. In (II), each Sb atom is surrounded by three Se atoms to give a tripodal coordination. One of the three independent Se atoms is a μ₂‐bridging ligand between two Sb atoms; the other two are terminal.     

A coordination polymer consisting of two different one‐dimensional copper(II) chains

The title compound, catena‐poly[[[diaqua(methanol‐κO)copper(II)]‐μ‐N‐(4‐methylpyrimidin‐2‐yl‐κN¹)pyrazin‐2‐amine‐κ²N¹:N⁴] [[aqua(aqua/methanol‐κO)(perchlorato‐κO)copper(II)]‐μ‐N‐(4‐methylpyrimidin‐2‐yl‐κN¹)pyrazin‐2‐amine‐κ²N¹:N⁴] tris(perchlorate) methanol monosolvate 1.419‐hydrate], {[Cu(C₉H₉N₅)(CH₃OH)(H₂O)₂][Cu(C₉H₉N₅)(ClO₄)(CH₃OH)_0.581(H₂O)_1.419](ClO₄)₃·CH₃OH·1.419H₂O}_n, is a one‐dimensional straight‐chain polymer of N‐(4‐methylpyrimidin‐2‐yl)pyrazin‐2‐amine (L) with Cu(ClO₄)₂. The complex consists of two crystallographically independent one‐dimensional chains in which the Cu^II atoms exhibit two different octahedral coordination geometries. The L ligand coordinates to two Cu^II centres in a tridentate manner, with the pyrazine ring acting as a bridge linking the Cu^II coordination units and building an infinite one‐dimensional chain. Extensive hydrogen bonding among perchlorate anions, water molecules and L ligands results in three‐dimensional networks.