Synthesis and liquid-crystalline behaviour of liposaccharide based comb polymers

In order to investigate the relationship between the liquid-crystalline state and the biological properties of polymers, we synthesized and studied liquid-crystalline comb polymers with a polyacrylamide main chain and three types of lipo-saccharidic side chains. These comb polymers were synthesized in four steps: first the polymerizable group was linked to the amino end of an α,ω-aliphatic amino acid; in the second step the ω-carboxylic acid function was activated in the form of an N-hydroxysuccinimidylester; in the third step the active ester was aminolysed by the amine function of the saccharide (N-methyl-D-glucamine, 2-amino-2-deoxy-β-D-glucose or 1-amino-1-deoxy-β-D-galactose) and a polymerizable liposaccharide was obtained; finally the liposaccharides were transformed into comb polymers by free-radical polymerization. Comb polymers exhibit mesophases in concentrated aqueous, ethanol or dimethylsulphoxide solution, and their mesomorphic character remains after the slow evaporation of the solvent. X-ray diffraction studies have shown that the mesophases have smectic or nematic ordering, depending upon the nature of the saccharidic residues of the liposaccharidic side chains.     

Synthesis of well‐defined macromonomers and comb copolymers from polymers made by atom transfer radical polymerization

Poly(n‐butyl acrylate) macromonomers with predetermined molecular weights (1300 < number‐average molecular weight < 23,000) and low polydispersity indices (<1.2) were synthesized from bromine‐terminated atom transfer radical polymerization polymers via end‐group substitution with acrylic acid and methacrylic acid. These macromonomers, having a high degree of end‐group functionalization (>90%), were radically homopolymerized to obtain comb polymers. A high macromonomer concentration, combined with a low radical flux, was needed to obtain a high conversion of the macromonomers and a reasonable degree of polymerization. By the traditional radical copolymerization of the hydrophobic macromonomers with the hydrophilic monomer N,N‐dimethylaminoethyl methacrylate (DMAEMA), amphiphilic comb copolymers were obtained. The conversions of the macromonomers and comonomer were almost quantitative under optimized reaction conditions. The molecular weights were high (number‐average molecular weight ≈70,000), and the molecular weight distribution was broad (polydispersity index ≈ 3.5). Kinetic measurements showed simultaneous decreases in the macromonomer and DMAEMA concentrations, indicating a relatively homogeneous composition of the comb copolymers over the whole molecular weight range. This was supported by preparative size exclusion chromatography. The copolymerization of poly(n‐butyl acrylate) macromonomers with other hydrophilic monomers such as acrylic acid or N,N‐dimethylacrylamide gave comb copolymers with multimodal molecular weight distributions in size exclusion chromatography and extremely high apparent molecular weights. Dynamic light scattering showed a heterogeneous composition consisting of small (6–9 nm) and large (23–143 nm) particles, probably micelles or other type of aggregates. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3425–3439, 2003     

Synthesis and properties of graft copolymers based on poly(3-hydroxybutyrate) macromonomers

Graft copolymers of poly(methyl methacrylate) with poly(3-hydroxybutyrate), PHB, segments as long side chains were prepared by the macromonomer method. PHB macromonomers were prepared from the esterification of oligomers with 2-hydroxyethyl methacrylate at their carboxylic acid end. Esterification products displayed low polydispersity indices (ca. 1.2) and a functionality of over 83%, with a Mn of 2,020. Using free radical polymerization methods, the macromonomers were copolymerized with methyl methacrylate to yield graft (comb type) copolymers at different comonomer feed ratios. The graft copolymers contained from 0.5 to 14 mol-% of PHB blocks, with a glass transition temperature decreasing from 100 to 3 degrees C.     

Macromolecular Architecture Based on Anionically Prepared Poly(ethylene oxide) Macromonomers

Synthesis of poly(ethylene oxide) (PEO) macromonomers carrying a methacyloyl group in one end, and N, N-dimethyl amino, thiophene, styryl and vinyl ether functional groups in the other end was desribed. The general synthetic strategy is based on the living anionic polymerization of ethylene oxide initiated with functional potassium alcoholates, followed by reaction with methacyloyl chloride. These macromonomers were further utilized in various macromolecular architectures through via concurrent or selective thermal free radical, oxidative and photoinitiated free radical and cationic polymerization methods. The use of this synthetic route to prepare graft copolymers possessing completly and perfectly alternating PEO side chains using charge-transfer-complex polymerization was also demonstrated.     

Thermal Properties of Oligo(2-ethyl-2-oxazoline) Containing Comb and Graft Copolymers and their Aqueous Solutions

Summary: The cationic ring opening polymerization of 2-ethyl-2-oxazoline (EtOx) was applied for the synthesis of methacrylate end-functionalized well-defined macromonomers that could be polymerized in a controlled manner using reversible addition-fragmentation chain transfer polymerization. The obtained comb polymers revealed lower critical solution temperature behavior in aqueous solution. The cloud points of these solutions could be tuned in a range from 35 °C to 85 °C by the incorporation of hydrophobic methyl methacrylate comonomer in varying amounts into the graft copolymers whereas copolymerization with methacrylic acid rendered temperature and pH sensitive copolymers. Thermo-gravimetric analysis showed a two-step decomposition of the graft copolymers and differential scanning calorimetry revealed glass transition temperatures that are significantly lowered in comparison to linear PEtOx.     

Synthesis and optical properties of green‐light‐emitting copolymers containing side‐chain oxadiazole units

Atom transfer radical polymerization was used to prepare well‐defined vinyl polyoxadiazole homomacromonomers with a properly modified α‐dicarboxylic acid methyl ester as the initiator. Macromonomers of various molecular weights with narrow polydispersities in some cases were obtained, as proved by gel permeation chromatography (GPC). The structures of the obtained macromonomers were then identified with ¹H NMR spectroscopy. These macromonomers were subsequently copolymerized with a dihydroxy anthracene based monomer by a polycondensation technique, and this resulted in polymacromonomers. Coil–rod–coil copolymers containing side‐chain anthracene and oxadiazole units were also synthesized by atom transfer radical polymerization. The resulting copolymers combined an anthracene derivative as the rigid block with a random copolymer of the desired anthracene‐ and/or oxadiazole‐based monomers as the flexible block. These copolymers were primarily characterized with GPC and ¹H NMR techniques. Additionally, the optical properties of all these copolymers were investigated in detail, and they suggested energy transfer from the oxadiazole to the anthracene chromophores, which became much more efficient in the solid state. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1049–1061, 2005     

Water-soluble graft copolymers from macromonomer method

Water-soluble graft copolymers of well-defined structure having hydrophobic polymethacrylate branches with different ester groups were prepared by the macromonomer method. Methacrylate macromonomers of controlled molecular weights having a methacryloyloxyl end group were synthesized by radical polymerization of the corresponding monomer in the presence of thioglycolic acid followed by the reaction of glycidyl methacrylate with the terminal carboxyl group. These macromonomers were copolymerized with methacrylic acid and methyl methacrylate to prepare tailor-made graft copolymers composed of a hydrophlic backbone and different kinds of hydrophobic branches, which were characterized by elemental analysis, NMR, and GPC. The viscosities of the aqueous solutions of the sodium salts of these graft copolymers were measured. It was found that the viscosity of the dilute solution of the graft copolymer was remarkably high compared with the corresponding random copolymer irrespective of the ester group in branch segments. Solubilizing behavior of Orange-OT in aqueous solutions of the graft copolymers and the random copolymer were also investigated to study the nature of the hydrophobic domain of the graft copolymers.     

Synthesis,characterization, and self‐assembly of comb‐dendronized amphiphilic block copolymers

Novel amphiphilic comb‐dendronized diblock copolymers composed of hydrophobic Percec‐type dendronized polystyrene block and hydrophilic comb‐like poly(ethylene oxide) grafted polymethacrylate P(PEOMA) block were designed and synthesized via two steps of atom transfer radical polymerization (ATRP). The comb‐like P(PEOMA) prepared by ATRP of macromonomers (PEOMA) with two different molecular weights (M_n = 300 and 475) were used to initiate the sequent ATRP of dendritic styrene macromonomer (DS). The molecular weights and compositions of the obtained block copolymers were determined by ¹H NMR analysis. The copolymers with relatively narrow polydispersities (1.27–1.38) were thus obtained. The bulk properties of comb‐dendronized block copolymers were studied by using differential scanning calorimetry, polarized optical microscopy and wide‐angle X‐ray diffraction (WAXD). Similar to dendronized homopolymers, the block copolymers exhibited hexagonal columnar liquid‐crystalline phase structure. By using such amphiphilic comb‐dendronized block copolymers as building blocks, the rich self‐assembly morphologies, such as twisted string, vesicle, and large compound micelle (LCM), were obtained in a mixture of CH₃OH and THF. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4205–4217, 2008     

Chemo-enzymatic synthesis of comb polymers

The paper describes the synthesis and characterization of comb polymers by a two-step chemo-enzymatic process. In the first step macromonomers bearing unsaturation at the chain end were prepared by lipase catalyzed ring-opening polymerization (ROP) of ε-caprolactone (CL) and 1,5-dioxepane-2-one (DXO). The ROP was carried out in bulk at 60 °C under anhydrous conditions using 2-hydroxyethyl methacrylate (HEMA) as the initiator. The DP of the macromonomers was controlled by regulating the monomer: HEMA molar feed concentration. The macromonomers were then homo- or co-polymerized in the second step with alkyl methacrylate monomers (methyl methacrylate or HEMA) using AIBN initiated free radical polymerization. Characterization of the polymers was done by ¹H NMR, SEC and DSC techniques.     

Photoinitiated Cationic Polymerization of Unconventional Monomers

Photoinitiated cationic polymerization of unconventional monomers namely, benzoxazines, monothiocarbonates and macromonomers of poly(ε-caprolactone) and poly(ethylene oxide) is described. Ring opening polymerization of benzoxazines and thiocarbonates by direct and sensitized photoinitiation using onium salts was studied. The structures of the resulting polybenzoxazine were complex and related to the ring opening process of the protanated monomer either at through oxygen or nitrogen atoms. In the case of monothiocarbonate, the polymerization was accompanied with isomerization of thiocarbonate group. The potential use of macromonomers in photoiniated cationic polymerization to design complex macromolecular structures such as graft copolymers, water-borne photoresist materials and networks with dangling chains was presented. Photoinduced oxidative polymerization of thiophene, precursor for conducting polymers, using onium salts was also demonstrated.     

Water soluble poly(ethylene oxide) functionalized norbornene polymers

The synthesis of three different poly(ethylene oxide) macromonomers with a norbornene and oxanorbornene end group is presented. The macromonomers were polymerized to comb‐polymers by ring‐opening metathesis polymerization (ROMP) using Grubbs' Catalyst G3 to produce water soluble polymers with polydispersities between 1.04 and 1.30 and molecular weights between 14,000 and 50,000 g/mol. Characterization by static and dynamic light scattering reveals that the comb‐polymers with norbornene backbone are molecularly disperse in aqueous solution, while the oxanorbornene‐backbone polymers form small water‐soluble aggregates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2640–2648, 2008     

A macromonomer approach to the synthesis of poly(1,1‐bis(ethoxycarbonyl)‐2‐vinyl cyclopropane‐graft‐dimethyl siloxane)

Poly(1,1‐bis(ethoxycarbonyl)‐2‐vinyl cyclopropane (ECVP)‐graft‐dimethyl siloxane) copolymers were prepared using a macromonomer approach. Poly(dimethyl siloxane) (PDMS) macromonomers were prepared by living anionic polymerization of cyclosiloxanes followed by sequential chain‐end capping with allyl chloroformate. These macromonomers were then copolymerized with ECVP. MALDI‐ToF mass spectrometry and ¹H NMR spectroscopy were used to show that the macromonomers had approximately 80% of the end groups functionalized with allyl carbonate groups. Gradient polymer elution chromatography showed that high yields of the graft copolymers were obtained, along with only small fractions of the PECVP and PDMS homopolymers. Differential scanning calorimetry showed that the low glass transition temperature (T_g) of the PDMS component could be maintained in the graft copolymers. However, the T_g was a function of polymer composition and the polymers produced had T_gs that ranged from ?50 to ?120 °C. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of high molecular weight comb block copolymers and their assembly into ordered morphologies in the solid state

This Article describes a simple two-step synthesis of comb block copolymers with molecular weights exceeding 1,000,000 g mol(-1) and their assembly into ordered morphologies in the solid state. This work is exciting because these polymers assembled into morphologies with domain sizes exceeding 100 nm and, in some examples, 200 nm without the use of additives. These materials reflected selected wavelengths of visible light, and these wavelengths could be affected by swelling with methylene chloride vapor. A comparison between the structures of comb block copolymers and linear block copolymers is presented with a discussion of important parameters affecting their assembly in the solid state. This Article will first describe the synthesis of comb block copolymers using ring opening metathesis polymerization and atom transfer radical polymerization and their subsequent characterization. The comb block copolymers, backbone polymers, and polystyrene arms were all characterized independent of each other and had low polydispersities. The comb block copolymers were assembled by dissolving in methylene chloride and allowing the solvent to evaporate. After thermal annealing, the polymers were characterized by scanning electron and optical microscopy. These polymers assembled into spherical, lamellar, and cylindrical arrays with domain sizes from 132 to 258 nm. This work extends the molecular architectures of polymers that can be assembled in the solid state, the molecular weights of block copolymers that were assembled, and the domain sizes that can be realized without the use of additives.     

Macromonomers from vinyl and cyclic monomers prepared by initiation with stable carbenium salts

The initiation of polymerization of α-methylstyrene and p-methoxystyrene with 9-anthranylmethyl salts proceeds by hydride transfer from the monomer to the initiator. As a result, macromonomers with a double bond as head group are formed. These products polymerize and copolymerize by radical and ionic mechanism leading to graft and block copolymers. Styrene and α-caprolactone polymerize with the same initiator by cationation of the monomer. In this case each macromonomer contains one photoreactive anthranylmethyl group which may photodimerize. As a result copolymers of the type A? A or A? B are produced.     

Synthesis and characterization of polylactide functionalized polyacetylenes

The paper deals with the synthesis and polymerization of novel poly(l-lactide)-derived acetylene monomers and the analysis of the thermal properties of the formed graft copolymers. Poly(l-lactide) macromonomers with different acetylene end groups were prepared using stannous octanoate as a catalyst in the presence of various hydroxyacetylenes. Next, the well-characterized macromonomers were subjected to polymerization using [{RhCl(nbd)}₂]/Et₃N and [RuCl₂(CH–o–OiPrC₆H₄)(IMesH₂)] to obtain graft copolymers. Investigation of these graft copolymers by GPC and NMR spectroscopy revealed the presence of some poly(l-lactide) formed as a side product during the ring opening polymerization of l-lactide. The thermal stability of the polymeric materials has been studied as a function of the polyacetylene backbone substituents and the length of poly(l-lactide) side chains. Introducing polyacetylene into polyester increased the polymer stability. The thermal degradation behavior of the synthesized materials depends on the length of poly(l-lactide) chains and also on l-lactide homopolymer impurities in the graft copolymers.     

酶促缩聚和原子转移自由基聚合法合成AB型两亲性嵌段共聚物

Novozyme-435催化10-羟基癸酸进行自缩聚反应得到线性聚酯, 端基分别是羟基(—OH)和羧基(—COOH), 在三乙胺催化下, 分别用α-溴代丙酰溴和三甲基氯硅烷(TMSCL)进行端基官能化生成一个单官能度的大分子引发剂, 在CuCl/2,2'-联吡啶(bpy)催化体系中, 引发甲基丙烯酸环氧丙酯(GMA)的原子转移自由基反应(ATRP), 得到聚(10-羟基癸酸酯)/聚甲基丙烯酸环氧丙酯(PHDA-b-PGMA) AB 型两亲性嵌段共聚物, 其结构及分子量(分布)通过核磁共振和凝胶渗透色谱(GPC)确证. 此AB型两亲性嵌段共聚物在水溶液中能自组装形成纳米粒子, 用原子力显微镜(AFM)观察粒子的形状和大小.     

Novel polypropene materials derived from vinylidene-terminated oligopropenes

Metallocene-based homogeneous Ziegler–Natta catalysts produce mono-olefin-terminated oligopropenes with narrow molecular weight distributions, controlled stereoregularities, and molecular weights ranging from 100 to 30,000 g/mole in high yield slurry and solution processes. Steric and molecular weight control are influenced by metallocene structures, and by polymerization conditions such as temperature and propene concentration. Predominantly mono-vinylidene-terminated oligopropenes are attractive intermediates, and feedstock for the synthesis of a variety of polypropylene materials, including blends, block and graft copolymers. The key step is the chain end functionalization of the vinylideneterminated oligopropenes via double bond conversion reactions, followed by the controlled synthesis of polypropylene block and graft copolymers. In melt and solution processes the olefinic end groups have been converted into a variety of polar functional groups, e.g. hydroxy, carboxy, succinic anhydride, thiol and acrylic groups. The thiol-terminated oligopropenes are chain transfer agents in radical methylmethacrylate polymerization with chain transfer constant measured to be 0.2. Acrylic monomers and styrene are grown onto the thiol end group via a chain transfer reaction, thus producing a family of block copolymers, e.g. poly(propene-b-methylmethacrylate) and poly(propene-b-styrene). As demonstrated by SEM fracture surface analysis, the poly(propene-b-styrene) block copolymers are efficient dispersing agents for compatibilizing polystyrene/polypropene (70/30) blends. Homo- and copolymerization of acrylic oligopropene macromonomers yield novel classes of graft copolymers with pendant isotactic or atactic oligopropene chains. Hydroxy-terminated oligopropenes are useful initiators in caprolactone polymerization to form poly(propene-b-caprolactone) block copolymers. IR spectroscopic studies demonstrate that succinic anhydride-terminated oligopropenes, obtained by ene-type addition of maleic anhydride to the olefinic oligopropene end group, react with oligomeric diamine-terminated polyamide-6,6 in the melt to yield polypropene-b-polyamide-6,6-b-polypropene triblock copolymers.     

Chemoenzymatic Synthesis of Branched Polymers

Summary: The combination of enzymatic polymerization with ATRP for the synthesis of branched (block) copolymers was investigated. Heterotelechelic polycaprolactone macroinimer was synthesized in a one‐pot enzymatic procedure by using 2‐hydroxyethyl α‐bromoisobutyrate as a bifunctional initiator. A polymerizable end group was introduced by subsequent in situ enzymatic acrylation with vinyl acrylate. Branched polymers were obtained by subsequent atom transfer radical polymerization (ATRP).

Enzymatic synthesis of heterotelechelic macromonomers and subsequent self condensing vinyl polymerization by ATRP.     

Synthesis of macromonomers of acrylic acid by telomerization: Application to the synthesis of polystyrene‐g‐poly(acrylic acid) copolymers

The synthesis of macromonomers of acrylic acid was performed by telomerization in a three‐step process. The first step was the telomerization of tert‐butyl acrylate in the presence of thioglycolic acid. Different molecular weights were obtained with different ratios of the monomer to the transfer agent. Good control of the molecular weights and architectures of the oligomers (e.g., the presence of an acid function on the chain end) was observed. The transfer constant of tert‐butyl acrylate with thioglycolic acid was assessed (chain‐transfer constant = 0.6). In the second step, the terminal unsaturation of the oligomers was obtained by the reaction of the terminal acid groups with 2‐isocyanatoethyl methacrylate to yield the macromonomers of tert‐butyl acrylate. In the last step, the tert‐butyl acrylate groups were hydrolyzed in the presence of trifluoroacetic acid at room temperature. The macromonomers were copolymerized with styrene to obtain graft copolymers, and the reactivity ratios were evaluated. Finally, the copolymers were characterized with surface electron microscopy and atom force microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 395–415, 2007     

Bio‐based comb‐like copolymers derived from alkyl 10‐undecenoates and maleic anhydride

In this article, 10‐undecenoic acid, based on castor oil, was used a raw material for the synthesis of alternating copolymers. ω‐Unsaturated fatty esters as alkyl 10‐undecenoates were prepared by the esterification reaction of 10‐undecenoic acid with alkyl alcohol. A series of comb‐like copolymers were synthesized by free radical polymerization from maleic anhydride and alkyl 10‐undecenoates copolymers with different length of alkyl side chains in a toluene solution. These copolymers were investigated by ¹H and ¹³C nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry (DSC). The copolymers were obtained in a low molecular weight in a range 3370–12,240 g mol⁻¹ and their structural characterization indicated the formation of alternating copolymers. DSC characterization revealed that these comb‐like copolymers showed amorphous to semicrystalline behavior by increasing the length of side chains. The bio‐based comb‐like copolymers allow for the development of new polymeric materials for several applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1039–1045