Encapsulation of silica nanoparticles by redox-initiated graft polymerization from the surface of silica nanoparticles

This study describes a facile and versatile method for preparing polymer-encapsulated silica particles by ‘grafting from’ polymerization initiated by a redox system comprising ceric ion (Ce⁴⁺) as an oxidant and an organic reductant immobilized on the surface of silica nanoparticles. The silica nanoparticles were firstly modified by 3-aminopropyltriethoxysilane, then reacted with poly(ethylene glycol) acrylate through the Michael addition reaction, so that hydroxyl-terminated poly(ethylene glycol) (PEG) were covalently attached onto the nanoparticle surface and worked as the reductant. Poly(methyl methacrylate) (PMMA), a common hydrophobic polymer, and poly(N-isopropylacrylamide) (PNIPAAm), a thermosensitive polymer, were successfully grafted onto the surface of silica nanoparticles by ‘grafting from’ polymerization initiated by the redox reaction of Ce⁴⁺ with PEG on the silica surface in acid aqueous solutions. The polymer-encapsulated silica nanoparticles (referred to as silica@PMMA and silica@PNIPAAm, respectively) were characterized by infrared spectroscopy, thermogravimetric analysis, and transmission electron microscopy. On the contrary, graft polymerization did not occur on bare silica nanoparticles. In addition, during polymerization, sediments were observed for PMMA and for PNIPAAm at a polymerization temperature above its low critical solution temperature (LCST). But the silica@PNIPAAm particles obtained at a polymerization temperature below the LCST can suspend stably in water throughout the polymerization process.     

A facile synthesis of highly water-soluble, core–shell organo-silica nanoparticles with controllable size via sol–gel process

A series of highly water-soluble organo-silica nanoparticles, ranging from 2 to 10 nm in diameter, were synthesized by the cohydrolysis and copolycondensation reactions. ω-methoxy(polyethyleneoxy)propyltrimethoxysilane (PEG6-9) and hydroxymethyltriethoxysilane (HMTEOS) mixtures were catalyzed by sodium hydroxide in the presence of surfactant benzethonium chloride (BTC) with various ratios of PEG6-9/HMTEOS at room temperature. The synthesized organo-silica nanoparticles possess a core–shell structure with a core of organo-silica resulting from HMTEOS and a monolayer shell of PEG6-9. The chemo-physical characteristics of the particles were studied by gel permeation chromatography (GPC), Fourier transform infrared (FTIR) spectroscopy, ²⁹Si nuclear magnetic resonance (NMR), dynamic light scattering (DLS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The molecular weight and particle size of the particles increased with increasing HMTEOS molar ratios. The richest HMTEOS composition for the water-soluble particles was found to be HMTEOS:PEG6-9 = 80:20, where the particles had a 6 nm diameter core and a 0.8 nm thick shell. We propose that these water-soluble organo-silica nanoparticles will be suitable for biomedical applications.     

Construction of simple gold nanoparticle aggregates with controlled plasmon–plasmon interactions

We have developed a colloidal assembly for the study of plasmon–plasmon interactions between gold nanoparticles. Colloidal aggregates of controlled size and interparticle spacing were synthesized on silica nanoparticle substrates. Following the immobilization of isolated gold nanoparticles onto silica nanoparticles, the surfaces of the adsorbed gold nanoparticles were functionalized with 4-aminobenzenethiol. This molecular linker attached additional gold nanoparticles to the ‘parent' gold nanoparticle, forming small nanoparticle aggregates. The optical absorption spectrum of these clusters differed from that of gold colloid in a manner consistent with plasmon–plasmon interactions between the gold nanoparticles.     

Synthesis of MPTS-modified cobalt ferrite nanoparticles and their adsorption properties in relation to Au(III)

Cobalt ferrite magnetic nanoparticles (Co-MNP) were prepared by a co-precipitation method and subsequently coated with (3-mercaptopropyl)trimethoxysilane (MPTS) for the extraction and recovery of Au(III) from aqueous chloride solutions. Physical characterization of the MPTS-modified particles (Co-MPTS) was performed using FT-IR, TGA, and SEM. Results from FT-IR confirmed that MPTS was present on the surface of the magnetic nanoparticles. The amount of MPTS was 0.36 mmol g⁻¹ of Co-MPTS, obtained by elemental analysis. SEM images revealed aggregates composed of nanocrystalline Co-MPTS particles. The extraction efficiency as a function of the pH, contact time, and initial Au(III) concentration was evaluated. The modified particles showed maximum adsorption in the pH range from 1.0 to 4.0. The adsorption behavior of Co-MPTS toward Au(III) followed a Langmuir isotherm and the maximum adsorption capacity was found to be 120.5 mg g⁻¹. The stability of the modified materials was improved as compared to that of bare Co-MNP. The subsequent desorption of gold could be achieved by using acidified thiourea solution; the highest gold recovery reached 85%.     

Vacancy diffusion in Cu Σ = 9 [110] twist grain boundary

Both the formation energy and the diffusive activation energy of a single vacancy migrating in the first four atomic layers intra- and inter-layer near Cu Σ = 9 [110] twist GB have been investigated by using the MAEAM. The formation of the vacancy is favorable on the first layer (1L) near the GB plane and is spontaneous on sites ‘2’–‘5’ especially ‘2’ and ‘4’. The effects of the GB on the intra- as well as inter-layer migration are mainly for 1L–1L as well as for 1L–1L′, 2L–1L and 3L–1L related to the 1L, respectively. Furthermore, the vacancy in 1L is favorable to migrate in 1L (intra-layer) or through GB plane to 1L′, the one in either 2L or 3L is favorable to migrate to 1L. So the vacancy tends to converge to the first layer near the GB plane.     

Synthesis of Au–Pd bimetallic nanoparticles under energetic irradiation fields

Bimetallic Au–Pd nanoparticles were synthesized under high-energy irradiation fields (1.17 and 1.33 MeV γ-rays, 9 MeV electrons, and 1.6 GeV C ions) from solutions containing Au³⁺ and Pd²⁺ and cationic surfactant (sodium dodecyl sulfate). Particles synthesized by the irradiation were observed using conventional transmission electron microscope (TEM) and annular dark-field scanning transmission electron microscopy (ADF-STEM). The particles synthesized by γ-rays and C ion irradiation exhibit core–shell structure with a Au-core and a Pd-shell. The dependence of the size distribution of nanoparticles on the dose rate is discussed.     

Influence of biomass and gold salt concentration on nanoparticle synthesis by the tropical marine yeast Yarrowia lipolytica NCIM 3589

Cell-associated gold nanoparticles and nanoplates were produced when varying number of Yarrowia lipolytica cells were incubated with different concentrations of chloroauric acid (HAuCl₄) at pH 4.5. With 10⁹ cells ml⁻¹ and 0.5 or 1.0 mM of the gold salt, the reaction mixtures developed a purple or golden red colour, respectively, and gold nanoparticles were synthesized. Nanoparticles of varying sizes were produced when 10¹⁰ cells ml⁻¹ were incubated with 0.5, 1.0 or 2.0 mM chloroauric acid salt. With 3.0, 4.0 or 5.0 mM HAuCl₄, nanoplates were also observed. With 10¹¹ cells ml⁻¹ nanoparticles were synthesized with almost all the gold salt concentrations. The cell-associated particles were released outside when nanoparticle-loaded cells were incubated at low temperature (20 °C) for 48 h. With increasing salt concentrations and a fixed number of cells, the size of the nanoparticles progressively increased. On the other hand, with increasing cell numbers and a constant gold salt concentration, the size of nanoparticles decreased. These results indicate that by varying the number of cells and the gold salt concentration, a variety of nanoparticles and nanoplates can be synthesized. Fourier transform infrared (FTIR) spectroscopy revealed the possible involvement of carboxyl, hydroxyl and amide groups on the cell surfaces in nanoparticle synthesis.     

Cationic Spherical Polyelectrolyte Brushes as Nanoreactors for the Generation of Gold Particles

Summary: If long polyelectrolyte chains are attached densely to colloidal latex particles, a spherical polyelectrolyte brush results. These spherical polyelectrolytes are dispersed in water and carry a high charge. We demonstrate that these systems can be used to immobilize ions of heavy metals, such as gold, as counter‐ions. Reduction of these ions leads to metallic nanoparticles. In this way the brush layer attached to the surface of the particles becomes a “nanoreactor” that may be used for chemical conversions of the metal ions. We show that the reduction of AuClequation/tex2gif-stack-1.gif ions within these nanoreactors leads to well‐defined and rather monodisperse gold nanoparticles that are attached to the surface of the core. A stable dispersion of polymeric core particles with attached nanoparticles results. All results reported here suggest that chemical reactions of ions immobilized in spherical polyelectrolyte brushes provide a new route to composite particles of inorganic and organic materials.

Transmission electron micrograph of gold particles on a core‐shell system.     

Glucose biosensor based on gold nanoparticle-catalyzed luminol electrochemiluminescence on a three-dimensional sol–gel network

An electrochemiluminescent glucose biosensor was proposed based on gold nanoparticle-catalyzed luminol electrochemiluminescence (ECL). Gold nanoparticles were self-assembled onto silica sol–gel network, and then glucose oxidase was adsorbed on the surface of gold nanoparticles. The surface assembly process and the electrochemistry and ECL behaviors of the biosensor were investigated. The assembled gold nanoparticles could efficiently electrocatalyze luminol ECL. ECL intensity of the biosensor depended on scan rate, luminol concentration, and size of gold nanoparticles. The response of the ECL biosensor was linear over the range 1 μM to 5 mM with a detection limit of 0.2 μM glucose and showed satisfying reproducibility, stability and selectivity.     

Preparation and properties of silica–gold core–shell particles

Silica-metal core–shell particles, as for instance those having siliceous core and nanostructured gold shell, attracted a lot of attention because of their unique properties resulting from combination of mechanical and thermal stability of silica and magnetic, electric, optical and catalytic properties of metal nanocrystals such as gold, silver, platinum and palladium. Often, the shell of the core–shell particles consists of a large number of metal nanoparticles deposited on the surface of relatively large silica particles, which is the case considered in this work. Namely, silica particles having size of about 600 nm were subjected to surface modification with 3-aminopropyltrimethoxysilane. This modification altered the surface properties of silica particles, which was demonstrated by low pressure nitrogen adsorption at ?196 °C. Next, gold nanoparticles were deposited on the surface of aminopropyl-modified silica particles using two strategies: (i) direct deposition of gold nanoparticles having size of about 10 nm, and (ii) formation of gold nanoparticles by adsorption of tetrachloroauric acid on aminopropyl groups followed by its reduction with formaldehyde.The overall morphology of silica–gold particles and the distribution of gold nanoparticles on the surface of modified silica colloids were characterized by scanning electron microscopy. It was shown that direct deposition of colloidal gold on the surface of large silica particles gives more regular distribution of gold nanopartciles than that obtained by reduction of tetrachloroauric acid. In the latter case the gold layer consists of larger nanoparticles (size of about 50 nm) and is less regular. Note that both deposition strategies afforded silica–gold particles having siliceous cores covered with shells consisting of gold nanoparticles of tunable concentration.     

“Superpermeability” and “pumping” of atomic hydrogen through palladium membranes

Permeation of atomic as well as molecular hydrogen through palladium membranes has been investigated experimentally in the temperature range from room temperature to 200 °C and at a higher incident flux of hydrogen atoms on palladium surface than in previous studies. The results demonstrate that phenomena of ‘superpermeability’ and ‘pumping’ of atomic gases through metal membranes are of a common nature. A theoretical model based on chemical thermodynamics and diffusion theory adequately describes the quantitative relationships observed in experiments. It was found that permeability of atomic hydrogen depends strongly on the magnitude of surface incident flux and membrane temperature.     

Bond length contraction in gold nanoparticles

The structure of nanoparticles typically differs from its bulk counterpart. Predominantly, the structures of gold nanoparticles have been under exceedingly intense discussion since the discovery of their high catalytic activity. We found an increasing bond length contraction with decreasing particle size for citrate-stabilized gold nanoparticles in aqueous solution as determined by in situ extended X-ray absorption fine structure (EXAFS) spectroscopy. Particle sizes and size distributions were determined by small-angle X-ray scattering. The analysis of the obtained EXAFS spectra employing ab initio calculations reveals that the Au–Au bond length undergoes a contraction of 2 pm for nanoparticles with a radius of 2.9 nm. NIST reference material RM 8011 gold nanoparticles with a radius of 4.4 nm exhibit a smaller contraction of approximately 1 pm. Finally, gold atoms in RM 8013 particles with a radius of 25.7 nm show distances of 288 pm—identical to the distance in gold foil—and exhibits bulk-like properties. The observed bond length contraction of gold nanoparticles in solution is significantly smaller than previously reported for gold nanoparticle deposited on surfaces, which is up to 15 pm. This indicates that the bond length contraction effect of “free” and “surface-immobilized” nanoparticles differ fundamentally. Such difference could be essential for the understanding of nanoparticle-supported catalysis.     

A combination of dispersive liquid–liquid microextraction and surface plasmon resonance sensing of gold nanoparticles for the determination of ziram pesticide

We have developed a reliable, fast, and highly sensitive analytical method utilizing dispersive liquid–liquid microextraction and gold nanoparticles probes for ziram (zinc bis(dimethyldithiocarbamate)) determination. The method is based on the in situ formation of gold nanoparticles in carbon tetrachloride as an organic phase. It was found that the trace levels of ziram influenced the formation of gold nanoparticles, leading to absorbance change of a sedimented phase. The results of the colorimetric ziram determination were in the concentration range of 0.12–2.52 ng/mL with a limit of detection of 0.06 ng/mL. The formation of the stable and dispersed gold nanoparticles in the organic phase provides a good precision for dispersive liquid–liquid microextraction method, resulting in the relative standard deviation of 3.8 and 1.2% for 0.56 and 1.58 ng/mL of ziram, respectively. This method has been successfully used for the ziram determination in samples of well and river water, soil, potato, carrot, wheat, and paddy soil.     

Electrocatalytic oxidation of nitric oxide at TiO2–Au nanocomposite film electrodes

Structured films of TiO₂ (anatase) nanoparticles (ca. 6 nm diameter) and gold nanoparticles (nominal 20 nm diameter) are formed via a layer-by-layer deposition procedure. TiO₂ nanoparticles are deposited with a Nafion polyelectrolyte binder followed by calcination to give a mesoporous thin film electrode. Gold nanoparticles are incorporated into this film employing a poly(diallyldimethylammonium chloride) polyelectrolyte binder followed by calcination to give a stable mesoporous TiO₂–gold nanocomposite. This methodology allows well-defined and structured films to be formed which are re-usable after a 500 °C heat treatment in air.Electrochemical experiments are performed in aqueous KCl and buffer solutions and for the oxidation of nitric oxide, NO, and nitrite in phosphate buffer solution. It is shown that the NO oxidation occurs as a highly effective electrocatalytically amplified process at the surface of the gold nanocomposite probably with co-evolution of oxygen, O₂. In contrast, the oxidation of nitrite to nitrate occurs at the same potential but without oxygen evolution. A mechanistic scheme for the amplified NO detection process is proposed.     

Kinetics of adsorption of Saccharomyces cerevisiae mandelated dehydrogenase on magnetic Fe3O4–chitosan nanoparticles

The adsorption of Saccharomyces cerevisiae mandelated dehydrogenase (SCMD) protein on the surface-modified magnetic nanoparticles coated with chitosan was studied in a batch adsorption system. Functionalization of surface-modified magnetic particles was performed by the covalent binding of chitosan onto the surface of magnetic Fe₃O₄ nanoparticles. Characterization of these particles was carried out using FTIR spectra, transmission electron micrography (TEM), X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). Magnetic measurement revealed that the magnetic Fe₃O₄–chitosan nanoparticles were superparamagnetic and the saturation magnetization was about 37.3 emu g⁻¹. The adsorption capacities and rates of SCMD protein onto the magnetic Fe₃O₄–chitosan nanoparticles were evaluated. The adsorption capacity was influenced by pH, and it reached a maximum value around pH 8.0. The adsorption capacity increased with the increase in temperature. The adsorption isothermal data could be well interpreted by the Freundlich isotherm model. The kinetic experimental data properly correlated with the first-order kinetic model, which indicated that the reaction is the adsorption control step. The apparent adsorption activation energy was 27.62 kJ mol⁻¹ and the first-order constant for SCMD protein was 0.01254 min⁻¹ at 293 K.     

Calorimetric study on self-assembling of two kinds of monometallic nanoparticles in solution

Recently, we have reported a noble method of preparing Ag/Rh bimetallic nanoparticles with a pseudo-core/shell structure. We simply mix the dispersions of poly(N-vinyl-2-pyrrolidone)(PVP)-protected Ag and Rh nanoparticles in solution at room temperature. We found that the mixture of dispersions forms bimetallic nanoparticles in a pseudo-core/shell structure on standing. We call this process the ‘self-assembling’ or ‘self-organizing’. In this study we seek for a thermodynamic driving force for this process by determining the enthalpy of the interaction among three pairs of nanoparticles by isothermal titration calorimetry (ITC). The results indicate that the interaction between each pair is strongly exothermic, and that among the pairs studied here the strength of the exothermic interaction is in the order of Ag/Pt     

Chitosan–magnetite nanocomposites (CMNs) as magnetic carrier particles for removal of Fe(III) from aqueous solutions

This research focuses on removal of Fe(III) from aqueous solution using chitosan–magnetite nanocomposites as potential sorbent. The presence of nanosized magnetic particles within the nanocomposites was confirmed by TEM and SAED analysis. The particles with diameter 508 μm and 84 μm, follow Frendlich sorption isotherm at 30 °C, and the Frendlich constants (K_F, 1/n) have been found to be 5.974 mg g⁻¹, 2.66 and 35.98 mg g⁻¹, 1.385, respectively. Out of various kinetic models, the experimental data for dynamic uptake of Fe(III) is best fitted on ‘pseudo-second order’ kinetic model. The linear nature of plots between log (% sorption) and log (time) is indicative of intra-particle diffusion. For the particles with diameters 508 μm and 84 μm, the value of k_id was found to be 1.78 mg l⁻¹ min^−0.5 and 2.13 mg l⁻¹ min^−0.5. The sorption mean free energy from the Dubinin–Radushkevic isotherm was found to be 7.04 kJ mol⁻¹ indicating chemical nature of sorption. The increase in chitosan content in sorbent particles is found to enhance the Fe(III) uptake. The various thermodynamic parameters have also been evaluated. Finally, the presence of Cu²⁺ ions in the sorbate is found to decrease the uptake of Fe(III).     

Formation of a gold superlattice on an S-layer with square lattice symmetry

This work describes a new strategy in which a crystalline bacterial cell surface layer (S-layer) composed of a monolayer of a single protein species was used as periodic nanometric template in the nucleation of ordered arrays of gold nanoparticles. A square superlattice of uniform 4 to 5 nm sized gold particles with 12.8 nm repeat distance was fabricated by exposing the S-layer lattice of Bacillus sphaericus CCM2177, in which thiol groups had been introduced before, to a tetrachloroauric(III) acid solution. Transmission electron microscopical studies showed that the gold nanoparticles were formed in the pore region during electron irradiation of an initially grainy gold coating covering the whole S-layer lattice. The shape of the gold particles resembled the morphology of the pore region of the square S-layer lattice. By electron diffraction and energy dispersive X-ray analysis the crystallites were identified as gold (Au(0)). Electron diffraction patterns revealed that the gold nanoparticles were crystalline but in the long range order not crystallographically aligned. It is postulated that S-layers will allow the fabrication of a wide range of inorganic nanocrystal superlattice arrays.     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

1-Substituted 5-thiotetrazoles as novel capping agents for stabilization of gold nanoparticles

Stable and nearly monodispersed gold nanoparticles with sizes of 2.8–4.7 nm are easily prepared by the reduction of tetrachloroaurate salts in a toluene-water system in the presence of 1-R-5-thiotetrazoles (R = Et, t-Bu, 1-adamatyl). The prepared gold nanoparticles were characterized by TEM, XRD, UV–Vis, FTIR and TGA.