毛细管电泳高频电导法测定尿中MDMA及其代谢物

建立了尿样中MDMA及其代谢物MDA的毛细管电泳高频电导法检测分析方法。对电泳分离缓冲介质的种类、浓度、pH值以及分离操作电压和进样时间等实验条件进行了优化。缓冲液为2．5mmol／L NH4 Ac 0．5mmol／L HAc 2mmol／L SDS 10mmol／L β-CD,分离电压为15kV时,可实现较好的分离与检测。该法在2．5～80μg/mL范围内。MDMA和MDA线性相关系数r分别为0．998和0．999,检出限均为1．0μg/mL(S／N=3)。不同添加浓度水平尿样,日间和日内RSD均小于5％,回收率均在90％以上,适于法医毒物分析和临床药物监测的需要。     

高效液相色谱法测定人尿中神经鞘氨醇和二氢神经鞘氨醇

建立了一种检测人尿中神经鞘氨醇（So）和二氢神经鞘氨醇（Sa）的高效液相色谱方法（HPLC）。离心分离尿样中的片状剥落细胞,裂解后用乙酸乙酯萃取、邻苯二甲醛衍生,在HPLC系统中通过梯度洗脱用Nova-PakC18－RP色谱柱（15cm×3．9mm,4μm）分离、荧光检测器检测。So和Sa的检出限均为0．05ng（女性尿样0,075μg/L、男性尿样0．005μg/L）。分析从我国一个村在采集的40份尿样,女性尿样中So、Sa和Sa／So比值分别为1．29－13．58μg/L、0．25－3．13μg/L和0．15－0．25,男性尿样中分别为0．075~3．07μg/L、0.019－0．50μg/L和0．028～0．26。     

自制SPME涂层顶空萃取-气相色谱法分析废水中的芳香胺类化合物

建立了顶空固相微萃取与毛细管气相色谱法(HS—SPME-GC)测定废水中芳香胺类化合物的新方法。采用溶胶-凝胶法,自制新型单苯并冠醚探针．对萃取温度,萃取时间、解吸时间、离子强度和pH值等实验条件进行了优化选择：结果表明,该方法精密度良好,在标准溶液为0．1mg／L时,相对标准偏差(RSD)为4．0％～7．8％,线性范围为0．05～100μg/L,检出限达到0．005～0．01μg/L,加标回收率在97％～105％之间。运用该法对药厂废水中芳香胺类化合物进行了检测,结果令人满意由此可见,对环境中的芳香胺化合物进行检测,固相微萃取是一种快速、经济、有效的方法。     

用多克隆抗体构建的夹心免疫传感器检测心肌肌钙蛋白I

用表面等离子体子共振生物传感器构建对心肌肌钙蛋白I特异性的免疫传感器检测心肌肌钙蛋白I，并建立两种检测方法：直接法的最低检测限为2．5μg／L，基于传感膜上的夹心免疫法的灵敏度为0．5μg／L．检测范围0．5～20μg／L，批内及批间精密度分别为3．5％～4．9％，6．1％～7．4％；用夹心法及国外试剂盒对40名健康献血者和20例急性心肌梗死患者血清心肌肌钙蛋白I水平进行检测，两者符合率为95％．     

人工尿样中芥子气-谷胱甘肽加合物的气相色谱-质谱法检测

该文以气相色谱-质谱法测定人工尿样中的芥子气-谷胱甘肽加合物的β-裂解产物1,1′-磺酰基二(2-甲巯基)乙烷(SBMTE)。采用固相萃取(SPE)及固相支持液-液萃取(SLE)两种方法对尿样中的SBMTE进行富集净化,并对两种方法的影响因素进行了优化。采用中等极性毛细管色谱柱(DB-17MS)分离,以电子轰击源(EI)质谱选择离子模式(SIM)检测,内标法定量。结果表明,以SPE/GC-MS方法检测,SBMTE在1~100μg/L范围内线性关系良好,相关系数r为0.998 4,检出限(LOD)为0.1μg/L,回收率大于90%;以SLE/GC-MS方法检测,SBMTE在2~150μg/L范围内线性关系良好,相关系数r为0.998 8,检出限为0.5μg/L,回收率大于90%。SPE方法适用于直接检测空白尿样中添加SBMTE或芥子气染毒真实尿样还原后样品的进一步净化处理,SLE方法可应用于芥子气染毒后真实尿样的确证检测和溯源性检测。     

在线还原富集火焰原子吸收光谱法测定环境水样中Cr(Ⅲ)和Cr(Ⅵ)的形态

采用单阀双阳离子交换树脂微柱并联，设计了双路采样逆向洗脱在线分离富集系统，该系统与原子吸收测量技术相结合，实现了在线分离富集-火焰原子吸收光谱法同时测定水中Cr(Ⅲ)和Cr(Ⅵ)，富集1min时，分析速度为60样/h，测定Cr(Ⅲ)和Cr(Ⅵ)的特征浓度分别为6．08μg/L和11．58μg/L(相当于1％吸收)，线性范围分别为0～1．0μg/mL和0～2．0μg/mL，对质量浓度为100μg/L的Cr(Ⅲ)和Cr(Ⅵ)测定的相对标准偏差分别为2．9％和3．0％、检出限分别为8．70和10．8μg/L。该法对实际水样加标回收率在94．5％～104．3％之间。     

对克伦特罗具有高特异性的酶联免疫吸附分析法研究

合成了克伦特罗(CL)半抗原2-(1-(4-氨基-3,5-二氯苯基)-2-(叔丁胺基)乙氧基)乙酸,采用活性酯法将半抗原与牛血清白蛋白偶联合成免疫原,经免疫、分离、纯化获得抗CL多克隆抗体,建立了对CL具高特异性的直接竞争酶联免疫吸附分析(dc-ELISA)法。本方法对CL检测的线性浓度范围为1.0×10!4～1.0 mg/L,定量检测下限为0.13μg/L。在尿样中添加CL标准至含量分别为10.0和1.0μg/L,dc-ELISA法检测的回收率分别为90.0%～115.9%和80.5%～112.4%;相对标准偏差(RSD)分别为7.1%和12.6%(n=10)。特异性实验结果表明:抗体与CL结构类似物沙丁胺醇(SAL)的交叉反应率<0.3%,因此本研究所制备的抗体可有效避免现有克伦特罗ELISA试剂盒、胶体金检测试纸假阳性率高的问题。     

啤酒中N-亚硝胺的SPME-GC-MS分析

研究了固相微萃取-气相色谱-质谱(SPME—GC—MS)联用方法检测啤酒中的N-亚硝基二乙胺(NDEA)、N-亚硝基吡咯烷(NPYR)、N-亚硝基二丁胺(NDBA)，采用聚二甲基硅氧烷／二乙烯苯(PDMS／DVB)萃取头，对影响固相微萃取效率的萃取时间、搅拌速度以及萃取方式等进行了优化，在优化实验条件下，方法的线性范围在12．5～250μg／L之间，相关系数r为0．9971～0．9995，检出限分别为NDEA4．50μg／L，NPYR8．99μg／L，NDBA2．27μg／L，NDBA回收率为86％～96％，相对标准偏差6．296～8．996，该法简化了前处理步骤，快速、方便．结果满意。     

离心式微固相萃取与液相色谱-质谱联用测定生物样品中新型合成大麻素

建立了离心式微固相萃取与液相色谱-质谱(LC-MS)联用，同步测定尿样和血样中5种新型合成大麻素的分析方法。尿样和血样稀释后在离心条件下通过C18离心式固相萃取柱，甲醇洗脱后LC-MS检测。结果显示，尿液基质中，5种合成大麻素在0.1～10μg/L浓度范围内线性关系良好，相关系数(R²)大于0.994，检出限(LODs)为0.01～0.02μg/L，定量限(LOQs)为0.05～0.08μg/L。全血基质中，5种合成大麻素在0.5～10μg/L浓度范围内线性关系良好，R²大于0.992, LODs为0.05～0.15μg/L, LOQs为0.18～0.50μg/L。在尿样和全血中分别添加0.5, 2, 10μg/L 3个浓度水平的合成大麻素，回收率分别为81.9%～108.3%和75.0%～95.5%，相对标准偏差(RSDs)低于10%。该方法可以满足生物样品中新型合成大麻素的分析需求。     

氨基甲酸酯类杀虫剂速灭威酶联免疫吸附分析方法研究

利用间-甲酚和β-丙氨酸合成了速灭威半抗原β-(间-甲基苯氧基羰基)氨基丙酸(HOM)。通过活泼酯法将HOM交联于牛血清白蛋白(BSA)和卵清蛋白(OVA)上;HOM-BSA为免疫原制备了速灭威的兔抗血清,ELISA法测得其效价高达1.28×106,交叉反应测定表明抗体方法特异性识别速灭威。对离子强度等影响因素进行了研究,确定了速灭威酶联免疫吸附分析方法(ELISA)的最佳工作条件,建立了定量测定速灭威的间接竞争ELISA方法,结果表明,该方法检测线性范围为1~10000μg/L;IC50为40.74μg/L;检出限为0.08~0.10μg/L;批内相对标准偏差为2.9%;批间相对标准偏差4.6%。土壤、稻谷和水中的平均添加回收率分别为80%、93.4%和107%。本研究建立了一种快速检测环境和农产品中速灭威残留的有效方法。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.