Electroreduction and determination of Pipril (Piperacillin) in both aqueous and biological samples

The electrochemical behavior of the relatively new antibacterial antibiotic Pipril (Piperacillin) at the dropping mercury electrode is investigated using both direct current polarography (DCP) and differential pulse polarography (DPP). At the hanging mercury electrode (HMDE), the reduction mechanism has been elucidated using cyclic voltammetric technique in the pH range from 2 to 10. The effect of some metal ions, e.g. Cu(II) and Pb(II) has been also tested. Determination of the drug using adsorptive stripping analysis was assessed in both aqueous and urine samples. The effect of the different experimental parameters affecting the drug determination, e.g. pH, supporting electrolyte nature, accumulation potential, accumulation time and other operational parameters are also mentioned. Detection limits of 5 × 10⁻⁹ and 1 × 10⁻⁸M Pipril in aqueous and urine samples, respectively, are achieved.     

Dual-cloud point extraction as a preconcentration and clean-up technique for capillary electrophoresis speciation analysis of mercury

A novel dual-cloud point extraction (dCPE) technique is proposed in this paper for the sample pretreatment of capillary electrophoresis (CE) speciation analysis of mercury. In dCPE, cloud point was carried out twice in a sample pretreatment. First, four mercury species, methylmercury (MeHg), ethylmercury (EtHg), phenylmercury (PhHg), and inorganic mercury (Hg(II)) formed hydrophobic complexes with 1-(2-pyridylazo)-2-naphthol (PAN). After heating and centrifuging, the complexes were extracted into the formed Triton X-114 surfactant-rich phase. Instead of the direct injection or analysis, the surfactant-rich phase containing the four Hg species was treated with 150 microL 0.1% (m/v) l-cysteine aqueous solution. The four Hg species were then transferred back into aqueous phase by forming hydrophilic Hg-l-cysteine complexes. After dCPE, the aqueous phase containing the Hg-l-cysteine complexes was subjected into electrophoretic capillary for mercury speciation analysis. Because the concentration of Triton X-114 in the extract after dCPE was only around critical micelle concentration, the adsorption of surfactant on the capillary wall and its possible influence on the sample injection and separation in traditional CPE were eliminated. Plus, the hydrophobic interfering species were removed thoroughly by using dCPE resulted in significant improvement in analysis selectivity. Using 10 mL sample, 17, 15, 45, and 52 of preconcentration factors for EtHg, MeHg, PhHg, and Hg(II) were obtained. With CE separation and on-line UV detection, the detection limits were 45.2, 47.5, 4.1, and 10.0 microg L(-1) (as Hg) for EtHg, MeHg, PhHg, and Hg(II), respectively. As an analysis method, the present dCPE-CE with UV detection obtained similar detection limits as of some CE-inductively coupled plasma mass spectrometry (ICPMS) hyphenation technique, but with simple instrumental setup and obviously low costs. Its utilization for Hg speciation was validated by the analysis of the spiked natural water and tilapia muscle samples.     

Simultaneous speciation of mercury and butyltin compounds in natural waters and snow by propylation and species-specific isotope dilution mass spectrometry analysis

A robust method has been developed for simultaneous determination of mercury and butyltin compounds in aqueous samples. This method is capable of providing accurate results for analyte concentrations in the picogram per liter to nanogram per liter range. The simultaneous determination of the mercury and tin compounds is achieved by species-specific isotope dilution, derivatization, and gas chromatography–inductively coupled plasma mass spectrometer (GC–ICP–MS). In derivatization by ethylation and propylation, reaction conditions such as pH and the effect of chloride were carefully studied. Ethylation was found to be more sensitive to matrix effects, especially for mercury compounds. Propylation was thus the preferred derivatization method for simultaneous determination of organomercury and organotin compounds in environmental samples. The analytical method is highly accurate and precise, with RSD values of 1 and 3% for analyte concentrations in the picogram per liter to nanogram per liter range. By use of cleaning procedures and SIDMS blank measurements, detection limits in the range 10–60 pg L^–1 were achieved; these are suitable for determination of background levels of these contaminants in environmental samples. This was demonstrated by using the method for analysis of real snow and seawater samples. This work illustrates the great advantage of species-specific isotope dilution for the validation of an analytical speciation method—the possibility of overcoming species transformations and non-quantitative recovery. Analysis time is saved by use of the simultaneous method, because of the use of a single sample-preparation procedure and one analysis.     

Mercury speciation and analysis in drinking water by stir bar sorptive extraction with in situ propyl derivatization and thermal desorption-gas chromatography-mass spectrometry

A method for mercury analysis and speciation in drinking water was developed, which involved stir bar sorptive extraction (SBSE) with in situ propyl derivatization and thermal desorption (TD)-GC-MS. Ten millilitre of tap water or bottled water was used. After a stir bar, pH adjustment agent and derivatization reagent were added, SBSE was performed. Then, the stir bar was subjected to TD-GC-MS. The detection limits were 0.01 ng mL(-1) (ethylmercury; EtHg), 0.02 ng mL(-1) (methylmercury; MeHg), and 0.2 ng mL(-1) (Hg(II) and diethylmercury (DiEtHg)). The method showed good linearity and correlation coefficients. The average recoveries of mercury species (n=5) in water samples spiked with 0.5, 2.0, and 6.0 ng mL(-1) mercury species were 93.1-131.1% (RSD<11.5%), 90.1-106.4% (RSD<7.8%), and 94.2-109.6% (RSD<8.8%), respectively. The method enables the precise determination of standards and can be applied to the determination of mercury species in water samples.     

A collaborative study of four methods of assay of benzylpenicillin

The assay of benzylpenicillin by iodimetric titration, spectrophotometry with a mercury(II) chloride—imidazole reagent, titration with mercury(II) nitrate in acetate buffer solution, and titration with mercury(II) perchlorate in aqueous pyridine solution, was examined in four laboratories. The first two methods were applied to two samples (the third one being the reference sample), the mercury(II) nitrate titration to three, and the mercury(II) perchlorate method to two samples. The four methods gave very similar results, but the purity obtained with the mercury(II) perchlorate method was slightly lower, and this procedure is less desirable because pyridine is used as solvent. There were no great differences in the relative standard deviations of the four methods. The titration with mercury(II) nitrate is preferred because it is an absolute method.     

Tri-n-octylphosphine sulfide: : A selective organic extractant

Tri-n-octylphosphine sulfide (TOPS) has been investigated as the stationary phase in reversed-phase partition paper Chromatographie separations using nitric or hydrochloric acids as the mobile phase. TOPS has also been studied as an extractant for metal ions. Silver, mercury (II), and palladium (II) were found to have RF values of zero when nitric acid was used as the mobile phase. These same ions were also selectively extracted from aqueous nitric acid solutions. Gold(III), mercury(II), palladium (II), and platinum (IV) were found to have RF values of zero when hydrochloric acid was used as the mobile phase. However, only gold(III) and mercury(II) were extracted from aqueous hydrochloric acid solutions in liquid-liquid extraction systems. Several separations were successfully performed from 1 M nitric acid.     

Surface-enhanced Raman scattering in nanoliter droplets: towards high-sensitivity detection of mercury (II) ions

We report a new method for the trace analysis of mercury (II) ions in water. The approach involves the use of droplet-based microfluidics combined with surface-enhanced Raman scattering (SERS) detection. This novel combination provides both fast and sensitive detection of mercury (II) ions in water. Specifically, mercury (II) ion detection is performed by using the strong affinity between gold nanoparticles and mercury (II) ions. This interaction causes a change in the SERS signal of the reporter molecule rhodamine B that is a function of mercury (II) ion concentration. To allow both reproducible and quantitative analysis, aqueous samples are encapsulated within nanoliter-sized droplets. Manipulation of such droplets through winding microchannels affords rapid and efficient mixing of the contents. Additionally, memory effects, caused by the precipitation of nanoparticle aggregates on channel walls, are removed since the aqueous droplets are completely isolated by a continuous oil phase. Quantitative analysis of mercury (II) ions was performed by calculating spectral peak area of rhodamine B at 1,647 cm⁻¹. Using this approach, the calculated concentration limit of detection was estimated to be between 100 and 500 ppt. Compared with fluorescence-based methods for the trace analysis of mercury (II) ions, the detection sensitivities were enhanced by approximately one order of magnitude. The proposed analytical method offers a rapid and reproducible trace detection capability for mercury (II) ions in water.     

Extraction spectrophotometric determination of mercury(II) using thiacrown ethers and Bromocresol Green

A reasonably sensitive and highly selective spectrophotometric method for the determination of mercury(II) is proposed. The method is based on the extraction of the ion-associate formed by a mercury(II) thiacrown ether cationic complex with Bromocresol Green as the anionic counter-ion using chloroform as the extracting solvent. The effect of thiacrown ethers of different cavity sizes, namely 1,4,7,10,13-pentathiacyclopentadecane (PTP) and 1,4,7,10,13,16-hexathiacyclooctadecane (HTO), the thiacrown ether concentration, the extracting solvent, the bromocresol green concentration and the aqueous phase pH on the extraction were investigated. Measurement of the absorbance at the lambda(max) (420 nm) of the extracted ion-associate reveals that Beer's law is obeyed over 0.5-12.0 ppm mercury(II) for both ligands. Slight interference from copper(II) and cadmium(II) is exhibited by the PTP ligand, while HTO is negligibly affected by these metal ions. Strong interference from silver(I) is evident for both ligands while alkali, alkaline earth and other transition metals tested posed negligible interference. Analysis of mercury in synthetic complex mixtures was satisfactory.     

Silica gel-immobilized-dithioacetal derivatives as potential solid phase extractors for mercury(II)

Dithioacetal derivatives with different para-substituents, XH, CH(3), OCH(3), Cl and NO(2) were synthesized and chemically immobilized on the surface of silica gel for the formation of five newly synthesized silica gel phases (I-V). Characterization of the silica gel surface modification by the organic compounds was accomplished by both the surface coverage determination as well as the infrared spectroscopic analysis. The metal sorption properties of the silica gel phases were studied to evaluate their performance toward metal-uptake, extraction and selective extraction processes of different metal ions from aqueous solutions based on examination of the various controlling factors. The studied and evaluated factors are the pH effect of metal ion solution on the metal capacity values (mmol g(-1)), equilibration shaking time on the percent extraction as well as the structure and substituent (X) effects on the determined mmol g(-1) values. The results of these studies revealed a general rule of excellent affinity of these silica gel phases-immobilized-dithioacetal derivatives for selective extraction of mercury(II) in presence of other interfering metal ions giving rise to a range of 94-100% extraction of the spiked mercury(II) in the metal ions mixture. The potential application of the newly synthesized silica gel phases (I-V) for selective extraction of mercury(II) from two different natural water samples, namely sea and drinking tap water, spiked with 1.0 and 10.0 ng ml(-1) mercury(II) were also studied by column technique followed by cold vapour atomic absorption analysis of the unretained mercury(II). The results indicated a good percent extraction and removal (90-100+/-3%) of the spiked mercury(II) by all the five silica gel phases. In addition, insignificant contribution by the matrix effect on the processes of selective solid phase extraction of mercury(II) from natural water samples was also evident.     

A new procedure for the speciation of mercury in water based on the transformation of mercury (II) and methylmercury (II) into stable acetylides followed by HPLC analysis

Conversion of mercury(II) and methylmercury(II) species dissolved in water into di(phenylethynyl)mercury and methyl(phenylethynyl) mercury takes place in satisfactory yield under alkaline conditions by stirring the aqueous solution with phenylacetylene at room temperature. Mercury speciation is simply obtained by HPLC analysis of the two organometallic species. The presence of heavy metals such as copper(II), zinc(II), cadmium(II) and lead(II) in concentrations 10000 times higher than mercury is tolerated, while little interference is displayed by humic acids and cysteine. Seawater samples can also be analysed following a properly adapted procedure.     

Determination of phenols and chlorophenols as trimethylsilyl derivatives using gas chromatography-mass spectrometry

A rapid and simple method is described for the simultaneous determination of 6 phenols (phenol, o-, m-, p-cresol, catechol and resorcinol) and 19 chlorophenols (all mono-, di-, tri-, and tetrachlorophenol isomers and pentachlorophenol) present in aqueous samples. The method is based on derivatization with trimethylsilyl-N,N-dimethylcarbamate (TMSDMC). In contrast to other derivatization agents, TMSDMC instantaneously reacts with the phenolic compounds at room temperature and no further sample processing is necessary prior to instrumental analysis. The determination of the derivatives was performed by capillary gas chromatography-mass spectrometry (GC-MS). The stability of the most instable trimethylsilyl derivative (pentachlorophenol) was studied using different excess levels of the derivatization reagent. The derivatization method was tested on spiked water samples preconcentrated by solid phase extraction on Isolute ENV+ cartridge. The overall method gave detection limits of 0.01-0.25 microg/L for all compounds and < 0.05 microg/L for 17 of them.     

Iodamine-T as an oxidemetric titrant in aqueous medium

Iodamine-T, the iodine analogue of chloramine-T, can be used for the direct oxidimetric titration in aqueous medium of As(III), Sb(III), Tl(I), ascorbic acid, hydroquinone, hydrazine, semicarbazide, thiourea, thiocyanate and sulphite. Back-titration can be used for the determination of sulphide, thiosulphate, dithiocarbamate, xanthate, thiosemicarbazide, Reinecke's salt, mercury(II) tetrathiocyanatocobaltate(II) and mercury(II) tetrathiocyanatozincate (II).     

Evaluation of methods for the determination of chlorophenols in surface water

Three methods for the determination of chlorophenols in surface water have been evaluated. Two of them utilize solid phase extraction followed by derivatization either in aqueous phase or in organic solvent. The third method is based on liquid-liquid extraction with simultaneous in-situ derivatization. This method was found to be not applicable for samples of surface water. The surfactants present in the samples prevent the separation of the hexane layer at a ratio of 1 : 20 or higher. Both methods using solid phase extraction gave acceptable results; however, the derivatization in aqueous phase proved its priority.     

Evaluation of methods for the determination of chlorophenols in surface water

Three methods for the determination of chlorophenols in surface water have been evaluated. Two of them utilize solid phase extraction followed by derivatization either in aqueous phase or in organic solvent. The third method is based on liquid-liquid extraction with simultaneous in-situ derivatization. This method was found to be not applicable for samples of surface water. The surfactants present in the samples prevent the separation of the hexane layer at a ratio of 1 : 20 or higher. Both methods using solid phase extraction gave acceptable results; however, the derivatization in aqueous phase proved its priority.     

A dip-and-read test strip for the determination of mercury(II) ion in aqueous samples based on urease activity inhibition.

A sensitive dip-and-read test strip for the determination of mercury in aqueous samples based on the inhibition of urease reaction by the ion has been developed. The strip has a circular sensing zone that containing two layers: the top layer is a cellulose acetate membrane where urease is immobilized on it; the bottom layer is a pH indicator wafer that is impregnated with urea. The principle of the measurement is based on the disappearance of a yellow spot on the pH indicator wafer. The elapsing time until the disappearance of the spot which depends on the concentration of mercury(II) ion is measured with a stopwatch. Under the experimental conditions, as low as 0.2 ng/ml mercury can be observed with the detection range from 0.2 to 200 ng/ml in water. Organomercury compounds give essentially the same response as inorganic mercury. Heavy-metal ions such as Ag(I), Cu(II), Cd(II), Ni(II), Zn(II), and Pb(II) as well as other sample matrixes basically do not interfere with the mercury measurement.     

Extraction of zinc and cadmium thiocyanate complexes in the presence of pyridine and some metal ion separations

Extraction of zinc(II) and cadmium(II) from ammonium thiocyanate solutions has been studied in benzene in the presence of pyridine. The effect of such variables as the pH of aqueous phase and concentration of metal, thiocyanate and pyridine on extraction has been investigated and the extracting species identified. Extraction behaviour of silver(I), manganese(II), cobalt(II), mercury(II) and thallium(III) has also been studied under identical conditions and some binary metal ion separations of analytical and radiochemical importance are reported.     

Solid‐phase Extraction Coupled Simple On‐line Derivatization Gas Chromatography – Tandem Mass Spectrometry for the Determination of Benzophenone‐type UV Filters in Aqueous Samples

The rapid determination of three benzophenone‐type UV filters: 2‐hydroxy‐4‐methoxy‐benzophenone (BP‐3), 2,4‐dihydroxybenzophenone (BP‐1) and 2,2′‐dihydroxy‐4‐methoxy‐benzophenone (BP‐8), in aqueous samples is described. The method involved the extraction of an aqueous sample using an Oasis HLB solid‐phase extraction (SPE) cartridge, followed by on‐line derivatization gas chromatography ‐ tandem mass spectrometry (GC‐MS/MS) with a trimethylsilylating (TMS) reagent. This eco‐friendly, injection‐port derivatization method, is sensitive, rapid, and provides reproducible results for these hydroxylated benzophenones in aqueous samples. The limits of quantitation (LOQs) were determined to be 1.0 to 2.5 ng/L for samples in 100 mL of water. The precision for these analytes, as indicated by relative standard deviations (RSDs), proved to be less than 11% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction yield, was between 80 and 106%. The method was then applied to some environmental water samples, river water and samples of effluents from a wastewater treatment plant (WWTP), having the potential to contain BP‐3 and BP‐1.     

Simultaneous ion-pair chromatography of inorganic anions and cations using on-column derivatization with chelating agents and UV detection

Six complexones have been investigated as on-column derivatizing agents for the simultaneous separation of inorganic anions and cations using ion pair chromatography. UV spectrophotometry at 210 nm has been applied for both the direct and the indirect detection of anions and anionic metal complexes. Under the experimental conditions used DCTA and DTPA have been practically applicable. Factors affecting the chromatographic behaviour of analyte ions have been studied. Chloride, nitrite, nitrate sulphate, chromate, molybdate, iron, chromium (III), copper (II), cobalt (II), nickel (II) and mercury (II) ions have been separated in 30 min with a mobile phase containing 1 mmol/1 TBA and 0.5 mmol/1 DCTA at pH 6.2 in acetonitrile-water (10:90 v/v). With DTPA as eluent and using pre-column derivatization of metal cations with DCTA eight anions and six metal cations can be separated. The detection limits are less than 0.1 mg/l for most of the investigated ions. Permanent address: Department of Analytical Chemistry, Vilnius University, Naugarduko 24, 2006 Vilnius, Lithuania     

Headspace single-drop microextraction with in-drop derivatization and capillary electrophoretic determination for free cyanide analysis

A new method involving headspace single-drop microextraction (SDME) with in-drop derivatization and CE is developed for the preconcentration and determination of free cyanide. An aqueous microdrop (5 microL) containing Ni(II)-NH(3) (as derivatization agent), sodium carbonate and ammonium pyromellitate (as internal standard) was used as the acceptor phase. The extracted cyanide forms a stable Ni(CN)(4) (2-) complex which is then determined by CE. Common experimental parameters (sample and acceptor phase pH, extraction temperature, extraction time and sample ionic strength) affecting the extraction efficiency were investigated. Using headspace SDME, free cyanide can be effectively extracted from the neutral solutions, i.e. without the acidification of the sample which often is prone to errors due to incomplete liberation and artefactual cyanide production. Proposed SDME-CE method provided about 58-fold enrichment in 20 min. The calibration curve was linear for concentrations of CN(-) in the range from 0.25 to 20 micromol/L (R(2) = 0.997). The LOD (S/N = 3) was estimated to be 0.08 micromol/L of CN(-). Such a detection sensitivity is high enough for free cyanide determination in common environmental and physiological samples. Finally, headspace SDME was applied to determine free cyanide in human saliva and urine samples with spiked recoveries in the range of 91.7-105.6%. The main advantage of this method is that sample clean-up, preconcentration and derivatization procedures can be completed in a single step. In addition, the proposed technique does not require any sample pretreatment and thus is much less susceptible to interferences compared to existing methods.     

Separation and preconcentration of mercury in water samples by ionic liquid supported cloud point extraction and fluorimetric determination

We have developed a cloud point extraction procedure based on room temperature ionic liquid for the preconcentration and determination of mercury in water samples. Mercury ion was quantitatively extracted with tetraethyleneglycol-bis(3- methylimidazolium) diiodide in the form of its complex with 5,10,15,20-tetra-(4-phenoxyphenyl)porphyrin. The complex was back extracted from the room temperature ionic liquid phase into an aqueous media prior to its analysis by spectrofluorimetry. An overall preconcentration factor of 45 was accomplished upon preconcentration of a 20?mL sample. The limit of detection obtained under the optimal conditions is 0.08?μg mL^?1, and the relative standard deviation for 10 replicate assays (at 0.5?g mL^?1 of Hg) was 2.4%. The method was successfully applied to the determination of mercury in tap, river and mineral water samples.