大分子植酸-聚有机硅倍半氧烷的合成及性能

采用溶胶-凝胶方法, 无需小分子酸催化剂, 利用硅烷化植酸的反应活性和酸催化活性, 与硅烷单体共水解缩聚, 在聚有机硅倍半氧烷分子链上原位接枝植酸, 合成了分子量大于50000的大分子植酸-聚有机硅倍半氧烷. 用GPC, 13C NMR, 29Si NMR, XPS, Raman光谱, SEM及电化学测试等分析手段进行表征, 对比不同酸催化植酸-聚有机硅倍半氧烷(PAP), 单宁酸-聚有机硅半氧烷(TAP), 盐酸-聚有机硅半氧烷(HCP)的结构和性能, 发现植酸-聚有机硅倍半氧烷上的螯合基团与金属表面的活性基团反应而键合, 在金属表面形成致密的保护膜, PAP与TAP和HCP比较具有优异的防腐性能.     

聚有机硅倍半氧烷的合成及其在涂层材料中的应用

聚有机硅倍半氧烷由于具有优异的力学、电学、光学性能,近年来被广泛应用作涂层材料以提高其热稳定性、耐腐蚀性、耐磨性、耐刮伤性、绝缘性等。介绍了聚有机硅倍半氧烷的合成方法及其在涂层材料中的应用。     

硅倍半氧烷改性聚酰亚胺(PI/Si)复合膜性能

通过在聚酰亚胺(PI)中分别添加笼型八氨基苯基硅倍半氧烷(OAPS)、笼型八苯基硅倍半氧烷(OPS)、梯形聚苯基硅倍半氧烷(PPSQ)和无机纳米SiO2,制备了4种含硅聚酰亚胺(PI/Si)复合膜.对PI/Si复合膜的相容性、力学性能、热性能和阻燃性能进行了研究.结果表明,OAPS与PI间展现出较好的相容性,PPSQ次之,而OPS,SiO2与PI的相容性较差;但相容性与复合膜的力学和热性能无明显的对应关系.SiO2可提高PI的力学性能;PI/OAPS复合膜的T g最高;OAPS,PPSQ或SiO2的加入使PI复合膜的热稳定性稍有提高,而少量OPS的加入大大降低PI膜的热稳定性.这类PI/Si复合膜的显著特点是能够大幅提高PI膜的极限氧指数,含硅化合物能够增加PI燃烧后残炭量,使残炭的形貌得到显著改善.PI/Si复合膜在燃烧过程中在表面形成一层白色含硅包裹层,起到隔热隔氧及保护内层有机物不被燃烧的作用.硅倍半氧烷对炭层形貌的改善显著,展现出比SiO2更好的阻燃性能.     

硅倍半氧烷改性聚酰亚胺(PI/Si)复合膜性能简

通过在聚酰亚胺(PI)中分别添加笼型八氨基苯基硅倍半氧烷(OAPS)、笼型八苯基硅倍半氧烷(OPS)、梯形聚苯基硅倍半氧烷(PPSQ)和无机纳米SiO2,制备了4种含硅聚酰亚胺(PI/Si)复合膜. 对PI/Si复合膜的相容性、力学性能、热性能和阻燃性能进行了研究. 结果表明,OAPS与PI间展现出较好的相容性,PPSQ次之,而OPS,SiO2与PI的相容性较差;但相容性与复合膜的力学和热性能无明显的对应关系. SiO2可提高PI的力学性能;PI/OAPS复合膜的Tg最高;OAPS,PPSQ或SiO2的加入使PI复合膜的热稳定性稍有提高,而少量OPS的加入大大降低PI膜的热稳定性. 这类PI/Si复合膜的显著特点是能够大幅提高PI膜的极限氧指数,含硅化合物能够增加PI燃烧后残炭量,使残炭的形貌得到显著改善. PI/Si复合膜在燃烧过程中在表面形成一层白色含硅包裹层,起到隔热隔氧及保护内层有机物不被燃烧的作用. 硅倍半氧烷对炭层形貌的改善显著,展现出比SiO2更好的阻燃性能.     

线型硅氧倍半聚合物的合成、形貌及稳定性（英文）

利用硅氧烷试剂(10-isocyanadedecyl)triethoxysilane与含不同碳数的直链有机二胺(氨基连接于碳链的两端)反应,制备得到了系列双脲基有机硅氧烷化合物,上述化合物酸性水解得到了系列硅氧倍半聚合物.扫描电镜照片显示,随着参与反应的直链有机二胺碳数的增加,硅氧倍半聚合物形貌由薄片状向纤维状过渡.一个有趣的现象是,所形成的硅氧倍半聚合物形貌随着产物存放时间的延长而发生变化,并最终纤维消失.含12碳数的二胺形成的聚合产物四个星期后纤维彻底消失而形成规整的球型.上述结果对于研究线型硅氧倍半聚合物的合成及性质具有重要意义.     

有机硅氧烷预聚体的合成及其在化学固沙中的应用

以甲基三乙氧基硅烷为反应物,在盐酸催化下水解缩合,合成无色透明粘稠的液体有机硅氧烷预聚体,IR和1H NMR表征证实其为目的产物;当有机硅氧烷预聚体与工业乙醇的体积比为1∶1,以质量分数0.60%的NaOH-CH3OH溶液为固化剂,加入该溶液0.05 mL,在30 ℃,预聚体交联固化时间为9 min;在50 ℃,预聚体交联固化时间为4 min;首次将有机硅氧烷预聚体,或它与聚乙烯醇（PVA20-88）的混合物用作化学固沙剂,形成的固结层具有较好的耐水性和较高的抗剪强度;当PVA20-88与有机硅氧烷预聚体的质量比为1∶4时,粘聚力达到483.7 kPa,内摩擦角为68.39°,在160 h的紫外光照射下,具有很好的耐老化性。     

超支化聚硅(碳/氧)烷的研究进展

总结了近十年来超支化聚有机硅(碳/氧)烷的研究进展,其中着重综述了硅氢加成反应、亲核取代反应和脱氢反应在制备超支化聚硅(碳/氧)烷的过程中各种因素对反应过程及产物物化性能的影响。     

多面体低聚八(二苯砜基)硅倍半氧烷合成优化及磺酰化机理研究

以笼型低聚八苯基硅倍半氧烷(OPS)为原料,AlCl3为催化剂,苯磺酰氯为磺酰化试剂,在二氯甲烷溶液中反应72h,合成了笼型八(二苯砜基)硅倍半氧烷(ODPSS).该方法合成过程简单稳定,产率高.通过FTIR、MALDI-TOF MS、1H NMR、13C NMR、29Si NMR和元素分析对产物进行了表征,证明OPS已完全转化为ODPSS.通过改变溶剂、催化剂、反应时间和各反应物物质的量之比,优化了反应条件,分析了反应机理,建立了该体系下OPS的磺酰化反应机理模型.     

多面体低聚八硝基苯基硅倍半氧烷纯度分析

使用高效液相色谱-电喷雾四级杆飞行时间质谱(HPLC-ESI-Q-TOF MS)联用技术对八硝基苯基硅倍半氧烷(ONPS)纯度进行分析,从而判定ONPS产物峰及杂质峰的位置,根据ONPS峰和杂质峰的面积比计算ONPS的纯度.通过改变HPLC的洗脱梯度和测试时间,将ONPS产物中的杂质峰完全分开,测得硝基苯基硅倍半氧烷(NPS)质量分数为97.55%,其中ONPS的纯度约为92.42%,产物中含有九硝基八苯基硅倍半氧烷(9-NPS)约5.13%,其它杂质含量约为2.45%.通过对ONPS高效液相色谱图峰形和同分异构体极性情况分析,进一步证明ONPS分子中硝基取代发生于对位和间位.使用超高效液相色谱(UPLC)对ONPS进行分析,以更高的分离效率验证了HPLC的结果.该方法可作为ONPS纯度的分析方法.     

5α,11-二羟基-2-氧代桉烷-3-烯的全合成

5α，11-二羟基-2-氧代桉烷-3-(5α-Hydroxy—isopterocarpolone，1)是由贾忠建等于1996年从中药南牡蒿中首次分离得到的一种桉烷型倍半萜类天然产物．桉烷型倍半萜类化合物广泛分布于天然植物中，具有较好的昆虫拒食、抑制细胞繁殖和植物生长调节等多种生理活性．天然产物1的合成研究尚未见报道．     

Use of spectroscopic techniques for the chemical analysis of biomorphic silicon carbide ceramics

Biomorphic silicon carbide ceramics are a new class of materials prepared by several complex processing steps including pre-processing (shaping, drying, high-temperature pyrolysis in an inert atmosphere) and reaction with liquid silicon to obtain silicon-carbide. The results of industrial process of synthesis (measured by the SiC content) must be evaluated by means of fast analytical methods. In the present work, diverse samples of biomorphic ceramics derived from wood are studied for to evaluate the capability of the different analytical techniques (XPS, LIBS, FT-IR and also atomic spectroscopy applied to previously dissolved samples) for the analysis of these materials. XPS and LIBS gives information about the major components, whereas XPS and FT-IR can be used to evaluate the content of SiC. On the other hand, .the use of atomic techniques (as ICP-MS and ETA-AAS) is more adequate for the analysis of metal ions, specially at trace level. The properties of ceramics depend decisively of the content of chemical elements. Major components found were C, Si, Al, S, B and Na in all cases. Previous dissolution of the samples was optimised by acid attack in an oven under microwave irradiation.     

氮化硅陶瓷前驱体研究进展

聚硅氮烷可用作高温裂解法制备氮化硅陶瓷的前驱体。本文概括了近年来聚硅氮烷前驱体的研究及发展状况,总结了聚氮烷前驱体在合成,应用用以及裂解转化为陶瓷机理方面的研究进展。     

高比表面碳化硅制备及其作为催化剂载体的应用

介绍了模板法、溶胶-凝胶法以及聚碳硅烷裂解法制备高比表面积碳化硅的主要过程和结果, 并介绍了碳化硅作为催化剂载体在多相催化中应用的研究进展. 对碳化硅在多相催化中的应用前景进行了展望.     

Structural investigations on pyrolysed polycarbosilanes

The combination of combustion analysis, IR-spectroscopy and Raman spectroscopy yields information about the chemical state of carbon in polycarbosilanes or silicon carbide. A stable polycarbosilane can be found where carbon is bonded in a network of silicon, carbon and hydrogen. In the temperature range between 700 and 800°C, the polycarbosilane is transformed into an amorphous silicon carbide with a small excess of carbon. During the crystallisation of the amorphous silicon carbide, which takes place at temperatures above 1100°C, glassy carbon is found by Raman-spectroscopy and combustion analysis. Finally after pyrolysis temperatures above 1500°C only silicon carbide exists; this may be caused by the reaction of free carbon with oxygen impurities in the samples.     

An investigation of the effect of Rolivsan on the process of synthesis of ceramic matrix from polycarbosilane precursor

Effect of Rolivsan MV-1 on the process of curing and pyrolysis of polycarbosilane PCS-M in argon and on the properties of the ceramic matrix being formed. Use of Rolivsan in polycarbosilane formulations provides effective curing of the latter to give network block-copolymers. Pyrolysis of the resulting precursors in the atmosphere of argon yields ceramic matrices, with the yield of these being 1.3–1.4 times that of the pyrolyzate of the starting components. A study of the elemental and phase composition demonstrated that the matrices belong to the class of amorphous ceramics of nonstoichiometric composition, which contain microcrystalline silicon carbide SiC. The ceramic obtained has a high thermo-oxidative stability (up to 1400°C) and changing the relative amounts of the starting oligomers enables a purposeful variation of its composition, temperature stability, and service characteristics of ceramic-matrix composite materials obtained on its basis by the “polymer technology.”     

Porous ceramics based on silicon carbide

A method was described for producing porous ceramics based on ultradispersed fibrous silicon carbide in an autonomous protective atmosphere. The protective atmosphere is formed by carbon dioxide being released in the synthesis.     

Synthesis and thermal studies of heterocyclic siloxanes containing boron

Eight- and six-membered cycloborasiloxanes containing two and one boron atoms respectively are strained ring compounds which undergo ring opening polymerization and ring–ring transformation reactions on thermolysis. Prolonged heating at 200°C results in volatilization of the cyclic boroxine (PhBO)₃, whereas rapid heating of either compound to 1500°C in an inert atmosphere does not result in loss of boron, but affords instead an amorphous residue containing silicon carbide, boron oxide and carbon. Upon further pyrolysis at 1700°C the final product consists of microcrystalline silicon carbide in which are embedded large crystals of boron carbide.     

掺铁碳化硅陶瓷的制备及其吸波性能

将羰基铁和液态聚碳硅烷(LPCS)反应生成的铁(Fe)溶胶与固态聚碳硅烷(PCS)混合,合成出不同Fe质量分数的PCS先驱体,然后经氧化交联和高温热解制备了不同Fe质量分数的磁性碳化硅陶瓷(Fe/SiC),系统地研究了Fe元素的引入对SiC陶瓷的组成、结构、磁性能和介电性能的影响规律。研究发现,当Fe质量分数小于8.94%时,在热解过程中,Fe元素可以显著促进SiCxOy的分解,生成β-SiC,且随着Fe质量分数的增加,β-SiC的结晶峰越来越强;但随着Fe质量分数继续增加,达11.78%时,则主要生成Fe3Si;Fe/Si C陶瓷均呈铁磁性,其饱和磁化强度随着Fe质量分数的增加而呈指数形式增加;当Fe质量分数为4.19%时Fe/SiC陶瓷在12.4 GHz具有最小的反射损耗,为-9.4 dB,同时低于-5 dB的带宽为2.4 GHz,Fe质量分数为8.94%时,低于-5 dB的带宽则为3.7 GHz,可用作良好的微波吸收材料。     

An evaluation of ceramic materials for use in non-cooled low-flow ICP torches

The feasibility of a variety of potentially suitable ceramics for the segmented ICP torch is discussed. It is shown that available ceramics fail for a combination of three reasons: (i) thermal shock, (ii) absorption of rf field and (iii) corrosion. The best overall results have been obtained with boron nitride and silicon nitride coated with a 10 μm layer of silicon carbide, but even then the lifetime of the torch is only 90 h at 900 W rf power.     

磁性碳化硅陶瓷先驱体聚铁碳硅烷的研究

通过低分子量的聚硅烷与二茂铁反应合成了聚铁碳硅烷(PFCS).探索了反应温度、裂解温度、二茂铁含量等因素对合成PFCS的影响.元素分析、红外光谱、氢谱分析表明,铁被引入到PFCS中,PFCS与聚碳硅烷的结构相似.高温裂解聚铁碳硅烷所得碳化硅陶瓷具有一定的磁性.