Electrochemical study of boron-mercurated derivatives of 3-cyclopentadienyl-3-cobalta-1,2-dicarba-closo-dodecaborane

The cyclic voltammetry and rotating disc electrode methods were used to study the electrochemical reduction and oxidation of boron-mercurated mono- and dimercury derivatives of 3-cyclopentadienyl-3-cobalta-1,2-dicarba-closo-dodecaborane and boron-mercurated dicobaltacarborane on platinum and glassy carbon electrodes in MeCN and DMF solutions. The first reduction step was the reversible electron transfer to the cobalt atom. This process is complicated by adsorption of the reaction product on the electrode, which is especially pronounced when the electrode is coated by metallic mercury evolved at later steps of reduction. The presumptive mechanisms of electroreduction are discussed in detail.     

Determination of Hydrogen Single Ion Activity Coefficients in Aqueous HCl Solutions at 25°C

The single ion activity coefficients of hydrogen and chloride ions in aqueous HCl solutions have been estimated at 25°C at concentrations up to 1 mol-kg^–1, using potentiometric measurements with ion-selective electrodes and appropriate calibration procedures. Two methods are described for an internal calibration of the electrodes in the extended Debye–Hückel concentration range. The results are compared to the conventional pH calibration with external buffer solutions. Since the latter calibration method does not account for the liquid junction potential E _J which arises at the reference electrode, the resulting activity coefficients are quite different in HCl solutions of higher concentration. These differences between internal and external calibration decrease significantly, when a correction for E _J is introduced into the conventional pH calibration. Hence, in solutions of higher ionic strength the accuracy of the conventional pH electrode calibration using buffer solutions is very limited, when exact H⁺ activities are required. The consistency of the results indicates that the liquid junction potentials in the examined systems calculated by the Henderson/Bates approximation are of reasonable precision.     

Comparison of copper(II) ion-selective electrodes for measurements at micromolar concentrations

Four types of copper ion-selective electrodes have been tested for determining copper at concentrations below lO^-6 mol 1^l-1. None of the electrodes has a Nemstian response in dilute copper solutions in this concentration range, though their responses are linear in pCu buffer solutions. The causes of the deviations are a direct redox effect in the case of an electrode with a Cu_1.8,Se single crystal membrane, production of copper ions by oxidation of the membrane itself in Ag₂S—CuS membrane electrodes, and a combination of the two in the case of the R??i?ka Selectrode. The electrode potentials are affected by the oxygen content and pH of the sample solution and the condition of the membrane surface. Precision tests on two types of electrode are described.     

Analytical applications of electrode sensitive to labetalol in pharmaceuticals

The analytical properties of an ion-selective electrode sensitive to labetalol with a liquid membrane, based on ion-pair complexes with sodium tetraphenylborate (TPB-Na⁺) are described. The studied electrode can be used for the determination of labetalol hydrochloride as a protonated form of labetalol in pharmaceuticals. The calibration curve, e.g. EMF=f(pC _LabHCl ) is linear in the range from 10⁻⁵ to 10⁻² mol L⁻¹ with a correlation coefficient of 0.9992 and slope of 61.13 mV/decade, which is close to the Nernstian slope. The detection limit of the examined electrode is 7.20×10⁻⁶ mol L⁻¹. The influence of pH of the tested solutions on the formulation of the electrode is not as considerable since the electrode works correctly in the pH range 3.0–8.0. The main attributes of the developed electrode are: stability, good reproducibility of EMF and short response time, close to 30 seconds depending on labetalol concentration in the solution. The electrode shows good selectivity for many inorganic ions. The selectivity for drug cations is weaker due to the structural similarity of the interfering cations to labetalol. The results of labetalol determination using direct potentiometry in drugs such as Pressocard (Polpharma) and Trandate (GlaxoWellcome) were compatible with the quantity of labetalol declared by the manufacturer, and with parallel UV spectrophotometric and HPLC determinations.     

Determination of the performance of glass electrodes in aqueous solutions in the physiological ph range and at the physiological sodium ion concentration

A method for testing glass electrodes in the physiological pH range (6.4–7.6) and at the physiological sodium ion concentration (0.15 mol l^-1), based on indirect comparison of potentials with the hydrogen gas electrode, is developed according to a scheme described earlier. The hydrogen ion sensitivity and the sodium ion error of a glass electrode can be determined with three different aqueous solutions of amine buffers and their hydrochlorides; two of these have different pH values and one also contains a sodium salt (at the higher pH value). A cell without a liquid/liquid junction, containing silver/silver chloride reference electrodes, is used at 37° C. The accuracy of both determinations is ±0.2 mV (±0.003 pH). The results for some commercial glass electrodes tested with this method are presented.     

Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.     

Determination of ethaverine and papaverine using ion-selective electrodes.

Ion-selective poly(vinyl chloride) membrane electrodes for the opium alkaloids papaverine and ethaverine are presented. The electrode membranes contain ion pairs of the alkaloids with the anionic counter ion tetraphenylborate. The detection limits for all electrodes were approximately 2 x 10(-6) mol dm-3 at pH 5.0 in 100 mmol dm-3 buffered solutions and the measured slopes were close to the values theoretically expected. The selectivity coefficient observed for the ethaverine-tetraphenylborate electrode is 10(-1.1) with respect to papaverine. The suitability of the membranes for single-use electrodes is discussed.     

Preparation of a cobalt hexacyanoferrate film-modified aluminum electrode by chemical and electrochemical methods: enhanced stability of the electrode in the presence of phosphate and ruthenium(III)

Modification of an aluminum electrode by means of a thin film of cobalt hexacyanoferrate (CoHCF) using electroless and electrochemical procedures is described. The modification conditions of the aluminum surface, including the electroless deposition of metallic cobalt on the electrode surface from CoCl₂+NaF solution and the chemical derivatization of the deposited cobalt to give a CoHCF film in 0.25 M KCl+0.25 M K₃[Fe(CN)₆] solution, have been determined. The modified Al electrodes prepared under optimum conditions show one or two well-defined redox couples in phosphate buffer solutions of pH 7.2, depending on the preparation procedure, due to the [Co^IIFe^III/II(CN)₆]^–/2– system. The effect of pH, alkali metal cations, and anions of the supporting electrolyte on the electrochemical characteristics of the modified electrode were studied. Diffusion coefficients of hydrated Na⁺ in the film, the transfer coefficient, and the transfer rate constant for electrons were determined. The stability of the modified electrodes under various experimental conditions was studied and their high stability in the sodium phosphate buffer solutions was confirmed. Enhanced stability was observed when the modified electrode was scanned in fresh solutions of RuCl₃ between 0 and 1 V for at least 20 cycles, due to the formation of mixed hexacyanoferrates of cobalt and ruthenium. Electronic Publication     

Light energy conversion with pheophytina monolayer at the SnO2 optically transparent electrode

The photoelectrochemical, absorption and fluorescence properties of pheophytin a mono- and multilayers, deposited on optically transparent tin oxide electrodes and quartz slides were investigated. Spectra of photocurrents coincided with the absorption spectra of photosynthetic pigment in monolayers at the SnO₂/solution interfaces. The anodic and cathodic photocurrents were measured at various electrode potentials. Effects of pH, electrode potentials, and concentration of redox reagents on the conversion of solar energy in monolayers on optically transparent electrodes are discussed. The absorption and fluorescence spectral characteristics, and fluorescence lifetime measurements of pheophytina in monolayers and thin films are also discussed in view of the aggregation properties of the photosynthetic pigment. The thermodynamics of adsorption of large amphiphilic compounds at the interface between two immiscible liquids is considered. The adsorption behavior of pheophytin a dissolved in different solvents is investigated. The thermodynamic parameters of pheophytin a adsorption at octane/water and benzene/water interfaces were determined.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Hyamine 1622 - Selective PVC Membrane Electrodes Based on bis (Crown Ether)s

Abstract

Hyamine 1622 - selective PVC membrane electrodes based on bis (crown ether)s containing the benzo - 18 - crown - 6 moiety were prepared, using o - nitrophenyloctylether (NPOE) or dipentylphthalate (DPP) as the plasticizer of the PVC membrane. Selectivity coefficients for various interfering ions (inorganic and organic cations), were determined by the mixed solution method. The selectivity of the respective electrodes was found to be affected by the kind of plasticizer employed, and NPOE seemed to be a more suitable plasticizer than DPP. The NPOE electrode system based on the bis (crown ether) that has 11 atoms between the two benzo-18-crown-6 moieties offers the advantage of greater selectivity. The electrodes show excellent electrode properties, and the electrode response was stable in a wide pH range.     

Effect of Some Urea Derivatives on Measurement of pH with Glass Electrodes

Abstract

In solutions containing some urea or thiourea derivatives and alkali metal hydroxides at pH 6 to 10, the pH value measured with glass electrodes changes with time. The degree of change varies between 0.1 and 1.0 pH units and depends on the structure of the urea derivative, its initial concentration, and the glass electrode used, but not on the cation of the alkali metal hydroxide added. In contrast, pH measured in the same solution with a quinhydrone electrode or the UV spectra remain time-independent. It is proposed that urea derivatives are adsorbed in the gel at the surface of the glass electrode and there affect the ion-exchange process.     

Interlaboratory comparisons of the determination of pH in poorly buffered fresh waters

Ten participants gathered at one location to compare measurements, made in the field and laboratory, of the pH of quiescent solutions of natural waters and dilute acids. The total error associated with a single routine measurement in the laboratory can be controlled to within ±0.2 pH, comprising a standard deviation of 0.05 pH and a bias of 0.1 pH. Inaccurate preparation of standard solutions is an appreciable source of bias. Larger errors observed for field measurements made with commercial equipment arise from poorly defined analytical procedures, the use of inappropriate electrodes, and probably dampness affecting the electronics. Stirring dilute solutions depresses the pH. This bias error, which is similar for all dilute solutions, depends on the type of liquid junction used in the reference electrode. Combination electrodes produce the largest stirring shifts (>0.2 pH) and separate electrodes, especially those with free-flowing junctions, the smallest. Correct choice of equipment and use of well-defined proven procedures are essential for the accurate and precise determination of pH.     

Simultaneous Determination of Aluminum and Iron in High Salt Content Matrices by Adsorptive Stripping Voltammetry. Application to Dialysis Fluids

A new analytical procedure for the simultaneous determination of aluminum(III) and iron(II) in two kinds of dialysis fluids (peritoneal and hemodialysis fluids) by differential pulse adsorptive stripping voltammetry (DPAdSV) is described. The voltammetric measurements were performed using, as working electrode, a stationary mercury electrode, and a platinum electrode and a Ag|AgCl|KCl_(sat.) electrode as auxiliary and reference electrodes, respectively, employing acetate buffer solutions at different pH as supporting electrolyte. As complexing agents, Solochrome Violet RS, Palatine Chrome Black 6BN, Chromazurol S and Eriochrome Black T were employed. For both elements, the accuracy, expressed as relative recovery R%, was very satisfactory being in the range 94–105%, the precision as repeatability, expressed as relative standard deviation s_r%, was lower than 6%, while the limits of detection were of the order of a few units of μg/L. The analytical voltammetric procedure has been validated by comparison with spectroscopic (graphite furnace atomic absorption spectroscopy, GFAAS) measurements.     

A copper ion-selective electrode with high selectivity prepared by sol-gel and coated wire techniques

A sol-gel electrode and a coated wire ion-selective poly(vinyl chloride) membrane, based on thiosemicarbazone as a neutral carrier, were successfully developed for the detection of Cu (II) in aqueous solutions. The sol-gel electrode and coated electrode exhibited linear response with Nernstian slopes of 29.2 and 28.1 mV per decade respectively, within the copper ion concentration ranges 1.0×10^–5–1.0×10^–1 M and 6.0×10^–6–1.0×10^–1 M for coated and sol-gel sensors. The coated and sol-gel electrodes show detection limits of 3.0×10^–6 and 6.0×10^–6 M respectively. The electrodes exhibited good selectivities for a number of alkali, alkaline earth, transition and heavy metal ions. The proposed electrodes have response times ranging from 10–50 s to achieve a 95% steady potential for Cu²⁺ concentration. The electrodes are suitable for use in aqueous solutions over a wide pH range (4–7.5). Applications of these electrodes for the determination of copper in real samples, and as an indicator electrode for potentiometric titration of Cu²⁺ ion using EDTA, are reported. The lifetimes of the electrodes were tested over a period of six months to investigate their stability. No significant change in the performance of the sol-gel electrode was observed over this period, but after two months the coated wire copper-selective electrode exhibited a gradual decrease in the slope. The selectivity of the sol-gel electrode was found to be better than that of the coated wire copper-selective electrode. Based on these results, a novel sol-gel copper-selective electrode is proposed for the determination of copper, and applied to real sample assays.     

Solid-contact Cu(II) ion-selective electrode based on 1,2-di-(<Emphasis Type="Italic">o</Emphasis>-salicylaldiminophenylthio)ethane

The development of Cu(II) solid-contact ion-selective electrodes, based on 1,2-di-(o-salicylaldiminophenylthio)ethane as a neutral carrier, is presented. For the electrodes construction, unmodified carbon ink (type 1 electrode) and polymer membrane-modified carbon ink (type 2 electrode) were used as solid support and transducer layer. Also, carbon ink composite polymer membrane electrode (type 3 electrode) was prepared. The analytical performance of the electrodes was evaluated with potentiometry, while bulk and interfacial electrode features were provided with electrochemical impedance spectroscopy. It is shown that modification of carbon ink with polymer membrane cocktail decreases the bulk contact resistance of the transducer layer and polymer membrane, thus enhancing the analytical performance of the electrode in terms of sensitivity, linear range, and stability of potential. The optimized electrodes of types 2 and 3 exhibit a wide linear range with detection limits of 1.8 × 10⁻⁶ and 1.6 × 10⁻⁶ M, respectively. They are suitable for determination of Cu²⁺ in analytical measurements by direct potentiometry and in potentiometric titrations, within pH between 2.3 and 6.5. The electrodes are selective for Cu²⁺ over a large number of tested transition and heavy metal ions.     

Formation of a novel electroactive film by electropolymerization of 5-amino-1-naphthol

The electrooxidation of 5-amino-1-naphthol in acetonitrile solutions led to the formation of a purplish gray, air-stable, polymeric film (poly(5-amino-1-naphthol), poly(5,1-ANT)), which presents a nonfibrillar morphology, on basal-plane pyrolytic graphite and In-Sn oxide conducting glass (ITO) electrodes. The film showed a reversible, well-defined oxidation-reduction response in both aqueous solutions of pH 1–13 and protic non-aqueous solutions, and was semiconducting. The formal redox potential (E^o') was 0.075 V vs. a sodium chloride saturated calomel electrode in 0.2 M NaClO₄ aqueous solution (pH 1.0). The pH dependence of (E^o') suggested that the electrode processes at pH 1-5 and pH 8–13 are 1e⁻ − 1H⁺and 1e^t- − 2 H⁺ reactions, respectively. The poly(5,1-ANT) film-coated ITO electrode displayed an electrochromic character: the oxidized form is purplish gray and the reduced one is pale brownish yellow. In addition, based on the electrochemical and IR absorption spectroscopic characterization of the film, some possible candidates for the structures of electroactive moieties of poly(5,1-ANT) are proposed.     

Macrocyclic antibiotics as chiral selectors in the design of enantioselective, potentiometric membrane electrodes for the determination of l- and d-enantiomers of methotrexate

Three enantioselective, potentiometric membrane electrodes (EPMEs) based on macrocyclic glycopeptide antibiotics—vancomycin and teicoplanin (modified or not with acetonitrile)—were proposed for the determination of l- and d-enantiomers of methotrexate (Mtx). The linear concentration ranges for the proposed enantioselective membrane electrodes were between 10⁻⁶ and 10⁻³ mol l⁻¹ for l- and d- methotrexate. The slopes of the electrodes were 58.00 mV/pl-Mtx for vancomycin-based electrode; 57.60 mV/pd-Mtx for teicoplanin-based electrode and 55.40 mV/pd-Mtx for teicoplanin modified with acetonitrile-based electrode. The detection limits of the proposed electrodes were of 10⁻⁸ mol l⁻¹ magnitude order. The surfaces of the electrodes are stable and easily renewable by polishing on alumina paper. All proposed electrodes proved to be successful for the determination of the enantiopurity of Mtx as raw material and of its pharmaceutical formulations (tablets and injections).     

Enantioselective, potentiometric membrane electrodes based on cyclodextrins: application for the determination of R-baclofen in its pharmaceutical formulation

Two enantioselective, potentiometric membrane electrodes based on α- and γ-cyclodextrins were proposed for the assay of R-baclofen. The slopes of the electrodes were 59.50 and 51.00 mV/pR-baclofen for α- and γ-cyclodextrin-based electrodes, respectively. The detection limits of the proposed electrodes were 7 × 10⁻⁹ mol l⁻¹ for α-cyclodextrin-based electrode and 1.44 × 10⁻¹⁰ mol l⁻¹ for γ-cyclodextrin-based electrode. The enantioselectivity was determined over S-baclofen. The proposed electrodes can be employed for the assay of R-baclofen raw materials and its pharmaceutical formulation, Norton-Baclofen^® tablets. The surfaces of the electrodes are stable and easily renewable by polishing on alumina paper.     

Hydrophobic ionic liquids in plasticized membranes of ion-selective eletctrodes

Ionic liquids with substituted imidazole, pyridine, and pyrrolidine cations and hydrophobic anions are studied as ionophores of PVC membranes of ion-selective electrodes plasticized with 2-nitrophenyloctyl ether. These membranes show a response to hydrophobic organic cations. In solutions of cationic surfactants, the slope of the electrode function is close to the theoretical one and the limit of detection does not exceed n × 10⁻⁶ M. Ion-selective electrodes for anions are developed using a trioctylmethylammonium salicylate ionic liquid. The electrode on its basis shows a stable potentiometric response to the salicylate anion in a wide range of concentrations and is characterized by good selectivity in the presence of foreign anions.     

Construction and Analytical Applications of Plastic Membrane Electrodes for Oxytetracycline Hydrochloride

 Oxytetracycline hydrochloride-selective electrodes of both the coated wire and the conventional polymer membrane types based on oxytetracyclinium phosphotungstate and phosphomolybdate have been prepared. A Nernstian response is shown by these electrodes within 1.0×10⁻⁶–1.0×10⁻² M concentration ranges depending on the type of electrode. The response is unaffected by the change of pH over the range 4–11. The standard electrode potentials, E°, were determined at different temperatures and used to calculate the isothermal temperature coefficients of the electrodes. The electrodes show good selectivity to oxytetracycline hydrochloride with respect to many inorganic cations, sugars and amino-acids. Oxytetracycline hydrochloride is determined successfully in pure solutions and in pharmaceutical preparations using calibration by standard addition and potentiometric titration. A regeneration process for the exhausted electrodes has been developed. Received February 2, 2000. Revision April 7, 2000.