氧化铈超细粉体的制备研究

采用共沉淀法，以工业碳酸铈为原料，以工业NH4HCO3为沉淀剂，制备出了平均粒径为一次粒径140nm，二次粒径630nm的CeO2超细粉，并进行了TG-DTA，XRD及TEM的表征研究。结果表明，以工业NHaHCO3作沉淀剂，可以制备CeO2超细粉，沉淀物360℃就可完全分解为CeO2，所制备的CeO2超细粉属于立方晶型，随灼烧温度升高，晶化程度增大。     

室温下用新型NH4CO3沉淀剂制备纳米TiO2光催化剂

用Ti(SO4)2为原料，NH4HCO3为沉淀剂，室温下制备了活性较高、粒径9nm的TiO2催化剂。考察了不同原料浓度、沉淀pH值、焙烧温度、焙烧时间等制备条件对TiO2粒度及其光催化降解十二烷基苯磺酸钠催化活性的影响。     

碳酸盐前驱物制备Y2O3超细粉及透明陶瓷

以Y(NO3)3和NH4HCO3为原料,通过向Y(NO3)3溶液中滴加NH4HCO3的方式制备了化学组成为Y2(CO3)3·2H2O的先驱沉淀物。研究了先驱沉淀物煅烧过程中的物相变化。先驱沉淀物1100℃煅烧4h后得到了平均粒径为60nm的无团聚Y2O3超细粉体。所得粉体不添加任何添加剂,在1700℃下真空烧结4h得到了透明Y2O3陶瓷。     

沉淀剂对CuO超细粉体形态与性能的影响

采用Cu(NO3)2为原料,分别以NH4HCO3、NH3·H2O、NaOH及NaOH与Na2CO3的混合液为沉淀剂,制备了CuO超细粉体,借助XRD、SEM、FT IR、TG DTA、TPR等技术对粉体形态结构与活性等进行了研究。结果表明,沉淀剂对CuO超细粉体的粒径、形貌、催化活性和氧化能力有显著影响;含Na+沉淀剂制备的CuO粉体的各种性能均优于含NH4+的沉淀剂,前者所得粉体具有晶粒细小、粒度分布均匀、比表面积大、催化活性高、氧化能力强等特点;由NaOH与Na2CO3混合液沉淀剂得到的Cu2(OH)2CO3前驱体,热解制备CuO超细粉体简便易行。     

碳酸氢氨沉淀法制备超细球化二氧化铈粉体

用碳酸氢氨均匀沉淀制备超细球化二氧化铈粉体。当烧结温度在400～700℃时用XRD分析，CeO2粉体尺寸为lO～100nm；用颗粒仪测得团聚体尺寸约为300nm；用SEM，TG—DTA和Zeta分析仪分析研究了CeO2晶体及形成过程，在沉淀法制取球化CeO2粉体过程中，NH4NO3起到球化剂的作用。     

沉淀剂种类对Ru/CeO2氨合成催化剂结构和性能的影响

采用6种沉淀剂通过共沉淀法制备了6种Ru/CeO2氨合成催化剂, 考察了沉淀剂种类对其氨合成性能的影响. 通过X射线衍射、N2吸附-脱附、X射线荧光光谱和H2程序升温还原等表征手段, 对不同沉淀剂影响Ru/CeO2催化剂氨合成性能的原因进行探讨. 结果表明: 采用(NH4)2CO3和NH4HCO3制备的催化剂样品具有较好的氨合成活性, 其中NH4HCO3为最佳沉淀剂, 所制备的催化剂在450 ℃, 10 MPa , 10000 h－1测试条件下, 出口氨浓度为14.46%. 而采用KHCO3, KOH, K2CO3沉淀剂制备的样品的氨合成活性相对较低. 沉淀剂种类不仅明显地影响钌离子和铈离子的共沉淀, 而且会影响载体二氧化铈表面氧的还原. 由NH4HCO3沉淀剂制备的Ru/CeO2催化剂的高活性归因于钌负载量增大、钌粒子分散度提高以及二氧化铈表面氧易还原三者相互作用的结果.     

超细Sr_2CeO_4粉体微乳液鄄高温法制备条件的正交试验及其发光性能研究

本文首先利用正交试验确定了微乳液鄄高温法合成蓝色发光Sr2CeO4超细粉体的最佳制备条件。接着研究了最佳条件下制备的Sr2CeO4超细粉体的性能。场发射扫描电镜(FE鄄SEM)显示,在850℃、900℃、1000℃或者更高温度下退火4h制备的粉体的形状分别呈球状、梭状和球状,平均粒径分别在100nm左右和1μm以内。X射线粉末衍射数据分析表明,该超细粉体属于正交晶系。室温下的光致发光光谱显示,该粉体的激发光谱有3个激发峰,主峰分别位于262nm、281nm和341nm,而其发射光谱只呈现出1个发射峰,主峰位于约470nm。与高温固相制备方法相比,微乳液鄄高温法可以在较低温度下制备出超细的粉体,而且它不但在262nm处出现了一个新的激发峰,主激发峰和发射峰的位置也分别蓝移了大约30nm和12nm。     

镧系六铝酸盐催化剂制备及甲烷燃烧催化性能表征

采用可控共沉淀法以NH4HCO3和NH4OH组成的缓冲溶液作为沉淀剂制备六铝酸盐,采用BET,XRD,TPR等技术考察了催化剂的物化性能.以甲烷催化燃烧为探针反应,对催化剂进行了催化性能表征,并研究了铈取代对催化性能的影响.结果表明： 采用NH4HCO3和NH4OH缓冲溶液作为沉淀剂使沉淀更均匀,可合成化学均一的六铝酸盐.La系六铝酸盐可在较低焙烧温度1050 ℃形成,稀土离子Ce主要是以高储放氧能力的CeO2相存在,与Mn之间存在协同作用提高了催化活性.当Mn取代度为2时,LaMnxAl12-xO19催化性能最佳,此时具有较高的氧化还原性能.Mn容易进入六铝酸盐晶格,Mn取代的La系六铝酸盐催化剂是很有前途的高温甲烷燃烧催化材料.     

CeO2@Au核壳结构纳米粒子的合成与性质研究

采用沉淀法制备了球形CeO2纳米粒子,将其作为核粒子溶液,然后向其中滴加四氯合金酸溶液,在CeO2胶体表面利用柠檬酸钠还原[AuCl4]-离子,得到了CeO2@Au核壳结构纳米粒子。TEM分析表明,CeO2纳米粒子分散效果好,粒径为5 nm;CeO2@Au核壳粒子为球形,无团聚,平均粒径为15 nm。XRD分析表明,CeO2@Au核壳粒子为晶型结构,属于立方晶系,CeO2空间群为O5H-FM3M,Au的空间群为Fm-3m。UV-vis分析发现,CeO2@Au核壳粒子在300和520 nm处呈现出两个比较强的吸收峰,分别对应于CeO2胶体溶液的吸收峰和金粒子的表面等离子共振吸收峰。EDS分析了核壳结构CeO2@Au纳米粒子中存在Ce,O和Au 3种元素。XPS分析表明,Ce3d3/2和Au4f电子结合能与标准结合能相比发生了变化,说明CeO2与Au之间存在着相互作用。     

一锅法制备YF_3:Yb~(3+)-Er~(3+)纳米晶复合PNIPAm-co-PAA纳凝胶及其荧光温敏行为

采用巯基乙胺为配体,以硝酸铒(Er(NO3)3),硝酸镱(Yb(NO3)3),硝酸钇(Y(NO3)3)和氟化铵(NH4F)为原料,水热法制备表面含NH2基团的活性YF3:Yb3+-Er3+纳米晶;以过硫酸钾(K2S2O8)为引发剂,借助1-乙基-(3-二甲基氨基丙基)碳酰二亚胺(EDC)与N-羟基丁二酰亚胺(NHS)的偶联反应,在活性纳米晶存在下,进行N-异丙基丙烯酰胺(NIPAm),N,N'-亚甲基双丙烯酰胺(BIS)与丙烯酸的自由基共聚合,一锅法制备了YF3:Yb3+-Er3+/PNIPAm-co-PAA荧光温敏纳凝胶.对制备的纳米晶及纳凝胶的结构与荧光性能进行了表征.结果表明,纳米晶的粒径为6~10 nm,呈单分散分布;纳凝胶的粒径呈多分散分布,粒径主要分布在100~300 nm.PL光谱分析表明,活性YF3:Yb3+-Er3+纳米晶的4F7/2→4I15/2跃迁,在483和496 nm处产生明显的能级劈裂;纳凝胶中,该能级劈裂依然存在,但随温度升高发生耦合;环境温度对纳凝胶的上转换发光强度产生明显影响.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Exploring the scope of the Gewald reaction: Expansion to a four-component process

An efficient four-component reaction was developed to take advantage of the reactivity of the 2-aminothiophene-3-carbonitrile functionality, which is obtained during the classical three-component Gewald reaction. Various α-methylene bearing ketones were reacted with malononitrile, elemental sulfur, and aryl/heteroarylnitrile derivatives in t-BuOH/NaOH to afford 2-arylthieno[2,3-d]pyrimidin-4-amines in high yields. Preliminary studies revealed the photophysical properties of the products and their potential for use as metal sensors.