Solvent extraction of cadmium as a previous step for its determination in biological samples by electrothermal atomization atomic absorption spectrometry

A method is proposed for the solvent extraction of cadmium using 1,5-bis(di-2-pyridylmethylene)thiocarbohydrazide (DPTH) as extractant. The optimum extraction conditions were evaluated from a critical study of the effect of pH, concentration of extractant, shaking time and ionic strength. The maximum volume ratio of the aqueous to organic phase was 30:1 for a single-stage extraction of99-100% of the metal ion. The detection limit is 0.01 ng/ml cadmium, and the calibration is linear from 0.1 to 5 ng/ml. The relative standard deviation for 10 replicate measurements is 1.8% for 2 ng/ml cadmium. The extraction method was applied to the determination of cadmium in some biological materials using graphite furnace atomic absorption spectrometry.     

Separation and determination of Cd in biological materials by continuous-flow fluid extraction coupled to flow-injection ICP-AES

An FI-ICP-AES method for the determination of trace levels of cadmium in biological samples is described based on the complexation of the metal ion with 1,5-bis(di-2-pyridyl)methylene thiocarbohydrazide (DPTH) and its subsequent on-line extraction into isobutyl methyl ketone (IBMK). The detection limit for cadmium is 8.7 ng/ml and the calibration is linear at least from 10 to 2000 ng/ml. The relative standard deviation for 7 replicate measurements is 3.4% for 100 ng/ml of cadmium. Results from the analysis of some certified biological reference materials are given.     

Determination of cadmium by electrothermal atomic absorption spectrometry after microwave-assisted digestion of animal tissues and sewage sludges

The determination of cadmium in different sample types has been carried out by electrothermal atomization atomic absorption spectrometry with D(2)-background correction using a unpyrocoated graphite tube, after pressurized microwave-assisted digestion. Five chemical modifiers [(NH(4))(2)HPO(4), Pd(NO)(3))(2), Ni(NO(3))(2), thiourea and Triton X-100] have been assayed and nickel nitrate has been found to be most effective for an accurate determination of cadmium in mussel tissue, pig kidney and sewage sludge. The characteristic mass of the method is of the order of 1 pg and the limit of detection is lower than 0.1 ng/ml.     

Determination of mercury(II) ion by electrochemical cold vapor generation atomic absorption spectrometry.

A technique for determination of mercury is described; it is based on electrolytic reduction of Hg(II) ion on a graphite cathode, the trapping of mercury vapor and its volatilization into a quartz tube aligned in the optical path of an atomic absorption spectrometer. The electrochemical cell consisted of a graphite cathode and an anode operating with constant direct current for the production of mercury atoms. A pre-activated graphite rod was used as the cathode material. The optimum conditions for electrochemical generation of mercury cold vapor (the electrolysis time and current, the flow rate, the type of electrode and electrolyte) were investigated. The characteristic electrochemical data with chemical cold vapor using NaBH4-acid were compared. The presence of cadmium(II), arsenic(III), antimony(III), selenium(IV), bismuth(III), silver(I), lead(II), lithium(I), sodium(I) and potassium(I) showed interference effects which were eliminated by suitable separation techniques. The calibration curve is linear over the range of 5-90 ng ml(-1) mercury(II). The detection limit is 2 ng ml(-1) of Hg(II) and the RSD is 2.5% (n = 10) for 40 ng ml(-1). The accuracy and recovery of the method were investigated by analyzing spiked tap water and river water.     

Ion-pair extraction and fluorimetric determination of cadmium with cryptand 2.2.1 and eosin

A method is described for the direct spectrofluorimetric determination of ultratraces of cadmium by extraction into 1,2-dichloroethane of the ion-pair formed between the eosinate anion and the cationic complex of Cd²⁺ with cryptand 2.2.1. The detection limit for cadmium is 0.5 ng/ml, and the linear working range is from the detection limit to 150 ng/ml. The relative standard deviation is 1.5% at the 100 ng/ml level. The equilibrium constant has been estimated and refined by the Letagrop-DISTR program. The proposed method has been tested in the determination of cadmium in high-purity zinc. The results show good agreement with those found by the more common ICP emission photometry and anodic stripping voltammetry methods.     

Determination of cadmium in biological and environmental samples by slurry electrothermal atomic absorption spectrometry

The retention of cadmium by the bacteria Escherichia coli and Pseudomonas putida was optimized in order to develop a rapid and selective preconcentration method for cadmium from biological and environmental samples prior to determination by electrothermal atomic absorption spectrometry. Living and lyophilized cells for both bacteria were used, but the method using dead cells shows better analytical capabilities. Cadmium from aqueous solutions is easily retained on the outer membrane of both bacteria in the pH range 4-10, although the selected working pHs for E. coli and P. putida were 5 and 9, respectively. Cadmium retained by the bacteria was dispersed in 3.5 M nitric acid and the slurry was introduced directly into the graphite tube. The best sensitivity and detection limit were obtained for E. coli (0.03 ng ml(-1) and 0.04 ng ml(-1) respectively, in the absence of any chemical modifier). A strong spectral interference from nickel chloride was found and methods to overcome it were developed. The proposed extraction procedure was tested by the determination of cadmium in different standard biological and environmental samples.     

Determination of cadmium by electrothermal atomic absorption spectrometry using electrochemical separation in a microcell

Electrodeposition on the graphite electrode under conditions of controlled current in a flow-through mode, followed by electrothermal atomic absorption spectrometry, is proposed for the determination of cadmium. After electrolysis in a microcell of 2.6 μl volume, deposited metal was dissolved in 40 μl 0.2 mol l⁻¹ HNO₃ and the whole volume was direct injected into the atomizer. Using this on-line arrangement and electrodeposition from 1.75 ml of sample solution detection limit of 25 ng l⁻¹ Cd was attained. The method was applied for the determination of cadmium in a real sample of seawater.     

Sequential extraction--spectrofluorometric determination of lead and cadmium using cryptands.

A spectrofluorimetric method for the determination of ultratrace amounts of lead and cadmium is described based on the sequential extraction of the ternary ion-association complexes formed between the cation, a cryptand as the ligand and eosin as a counter ion. A linear working range from the detection limit (0.5 ng ml(-1) to 250 ng ml(-1) of lead and to 1 50 ng ml(-1) of cadmium was obtained. The relative standard deviation was 2-4%. The proposed method has been applied successfully to the determination of lead and cadmium in zinc metals and soft drinks.     

流动注射在线预浓集原子吸收光谱分析废水中的Cd~（2＋）、Fe~（3＋）、Zn~（2＋）

将ＳＨＡ无机离子交换剂应用于在线预浓集ＦＩＡ—ＡＡＳ系统中，对痕量Ｃｄ、Ｚｎ、Ｆｅ的测定进行了研究。三个元素的检出限分别为０．１ｎｇ／ｍｌ，０．３ｎｇ／ｍｌ，０．６ｎｇ／ｍｌ。相对标准偏差小于３％（定时进样）和５％（定量进样）．用标准物分析和回收实验评价了方法的准确度．对各种实际水样的测定结果今人满意。     

Determination of cadmium in polyethylene by analytical atomic spectrometry with gas-phase sample introduction technique

Cadmium in polyethylene was determined by both inductively coupled plasma atomic emission spectrometry (ICP-AES) and atomic absorption spectrometry (AAS) with continuous-flow gas-phase sample introduction in a reaction medium of ascorbic acid. In the presence of mixture of cobalt and thiourea in the ascorbic acid solution, the sensitivities by both ICP-AES and AAS for cadmium were greatly enhanced. The gaseous cadmium species was phase-separated in a gas–liquid separator and directed via a stream of argon carrier gas to an inductively coupled plasma and an electrically heated quartz tube atomizer (QTA) for atomic spectrometry. Under the optimized experimental conditions, the best attainable detection limits at Cd I 228.802 nm line were 1.3 and 0.017 ng/ml with linear dynamic ranges of 10–500 ng/ml and 0.1–1 ng/ml in concentrations by ICP-AES and QTA-AAS, respectively. The instrumental precisions expressed as the relative standard deviation (R.S.D.) from ten replicate measurements of 50 and 1 ng/ml cadmium by ICP-AES and QTA-AAS were 5.6% and 3.2%, respectively. With the use of ICP-AES and QTA-AAS with gas-phase sample introduction method, six- and 200-fold improvements in detection limits for cadmium were obtained in comparison with their conventional solution nebulization methods, respectively. After the effects of several diverse elements on the determination of cadmium by ICP-AES and QTA-AAS with the present gas-phase sample introduction systems were examined, these methods were applied to the determination of low concentrations of cadmium in polyethylene. The results obtained by the present method were in good agreement with the certified values.     

Determination of mercury in environmental samples by cold vapour generation and atomic-absorption spectrometry with a gold-coated graphite furnace

Mercury is determined at below the pg/ml level by a combination of cold vapour generation, trapping in a gold-coated graphite furnace and atomic-absorption detection. The mercury is reduced to the element by stannous chloride, stripped from solution by a stream of nitrogen and collected on a gold-coated porous graphite disk in a graphite furnace. It is then atomized by increasing the graphite furnace temperature and detected by an atomic-absorption spectrophotometer. The absolute detection limit and the characteristic mass were found to be 5 and 20 pg for 0.0044 absorbance, respectively. The concentration limit of detection was 0.1 pg/ml for a 50-ml sample, and the linear dynamic range covered three orders of magnitude. The precisions of the measurements were 2.7% for 0.1 ng and 2.6% for 2 ng of mercury. Analyses of NBS and NIES reference materials showed quantitative recovery. Analytical results obtained by the technique are presented for natural waters, marine biota and sediments.     

Determination of cadmium by electrothermal atomic absorption spectrometry after microwave-assisted digestion of animal tissues and sewage sludges

The determination of cadmium in different sample types has been carried out by electrothermal atomization atomic absorption spectrometry with D₂-background correction using a unpyrocoated graphite tube, after pressurized microwave-assisted digestion. Five chemical modifiers [(NH₄)₂HPO₄, Pd(NO)₃)₂, Ni(NO₃)₂, thiourea and Triton X-100] have been assayed and nickel nitrate has been found to be most effective for an accurate determination of cadmium in mussel tissue, pig kidney and sewage sludge. The characteristic mass of the method is of the order of 1 pg and the limit of detection is lower than 0.1 ng/ml.     

Determination of traces of cadmium in natural water samples by flow injection on-line preconcentration-graphite furnace atomic absorption spectrometry.

A flow injection on-line preconcentration-graphite furnace atomic absorption spectrometric method was developed for the determination of traces of cadmium in natural water samples. Cadmium in samples was adsorbed on an iminodiacetate-type chelating resin, Muromac A-1 microcolumn (3 mm i.d. and 10 mm long), and then eluted with 2 mol l-1 HNO3. The eluate was introduced into the injection tip of an autosampler. The eluate zone with the highest analyte concentration was injected into the graphite furnace by cooperation of a peristaltic pump and a syringe pump of the autosampler, which were controlled by a programmable controller. The present system was successfully applied to the determination of cadmium in natural water samples. A detection limit of 0.2 ng l-1 was obtained with 12 ml sample loading. The recoveries were 99 and 108% for tap water (4 ml loading) and underground water (12 ml loading), respectively. Analytical results obtained for a river water reference material (JAC-0031, Japan Society for Analytical Chemistry) were close to the reference value.     

Determination of trace amounts of gold in waste water by graphite furnace atomic-absorption spectrophotometry with preconcentration on trioctylphosphine oxide chemically modified tungsten wire matrix

Preconcentration on a trioctylphosphine oxide (TOPO) chemically modified tungsten wire matrix followed by graphite furnace atomic-absorption spectrophotometry measurement is described for the determination of trace gold in waste water. The TOPO modified tungsten wire matrix, after accumulating the gold, is placed in a graphite cup for direct atomization and measurement. Under the selected conditions, the absorbance is proportional to the concentration of gold over the range 0.4-18 ng/ml and the detection limit is 0.2 ng/ml. This method is sensitive and convenient. It has been applied to some waste waters with satisfactory results.     

Natural analcime zeolite modified with 5-Br-PADAP for the preconcentration and anodic stripping voltammetric determination of trace amount of cadmium.

A procedure for separation and preconcentration of trace amounts of cadmium has been proposed. A column of analcime zeolite modified with benzyldimethyltetradecylammonium chloride and loaded with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) was used for retention of cadmium. The cadmium was quantitatively retained on the column at pH approximately 9 and was recovered from column with 5 ml of 2 M nitric acid with a preconcentration factor of 140. Anodic stripping differential pulse voltammetry was used for determination of cadmium. A 0.05 ng/ml detection limit for the preconcentration of aqueous solution of cadmium was obtained. The relative standard deviation (RSD) for eight replicate determinations at the 1 microg/ml cadmium levels was 0.31% (calculated with the peak height obtained). The calibration graph using the preconcentration system was linear from 0.01 to 150 microg/ml in final solution with a correlation coefficient of 0.9997. For optimization of conditions, various parameters such as the effect of pH, flow rate, instrumental conditions and interference of number of ions, were studied in detail. This method was successfully applied for determination of cadmium in various complex samples.     

Determination of cadmium by an improved double chamber electrothermal vaporization inductively coupled plasma atomic emission spectrometry

An improved double chamber electrothermal vaporization (ETV) system was designed. A new inner chamber and its bottom plate made of quartz glass were attached with carrier support gas inlet port for the determination of cadmium by inductively coupled plasma atomic emission spectrometry (ICP-AES). The use of the inner chamber in combination with the plate played important roles to transport the metal vapor efficiently into argon ICP. Ten-μl sample aliquots were dried at 100 °C and subsequently heated at 1000 °C on the tungsten boat furnace. The evolved vapor was swept into the ICP source through PTFE tubing and the inner chamber by a 0.8 l/min H₂ (7%)-Ar carrier gas. The performance parameters of ETV-ICP-AES such as temperature program and gas flow rate were evaluated using cadmium standard solution. Under the optimized experimental conditions, the best attainable detection limit at Cd II 214.438 nm line was 0.2 ng/ml with linear dynamic ranges of 50 to 10,000 ng/ml for cadmium. The instrumental precision expressed as the relative standard deviation (RSD) from ten replicate measurements of 10,000 ng/ml for cadmium by ETV-ICP-AES was 0.85%. The present method has been successfully applied to the determination of cadmium in zinc-base materials.     

Determination of cadmium in tobacco smoke and zinc in tap water by solvent extraction flame atomic absorption spectrometry

Procedures are described for the determination of cadmium in tobacco smoke and zinc in tap water by flame atomic absorption spectrometry after chelation with benzyl 2-pyridyl ketone 2-pyridylhydrazone and extraction with isobutyl methyl ketone. Calibration graphs in the organic layer were linear up to 1.3 g/ml, with sensitivities of 80 ng/ml (Zn) and 71ng/ml (Cd), and limits of detection of 49 ng/ml for zinc and 38 ng/ml for cadmium. RSD values were 2.9% at 0.42 g/ml (Cd) and 4.7% at 0.17 g/ml (Zn).     

Determination of cadmium in air particulates by flameless atomic absorption spectrometry with a graphite tube

A sensitive and selective determination of cadmium in aerosols by flameless atomic absorption spectrometry is described. By two successive treatments in 0.1 M suprapure nitric acid, the cadmium is removed from the paper filter on which the particulates have been collected. Routinely 10–50 μl of the 100-ml solution are injected into a graphite oven and the % absorption at 228.8 nm is measured. If half a 24-h filter (400 m³ air) is used, the dilution is made to 50 ml and 50 μl is injected, an unusually low concentration of 0.20 ng m^-3 can be determined quantitatively with a relative standard deviation of 10%. The reproducibility of the complete procedure is 4.8%. An interlaboratory comparison indicated that the accuracy is very good. The same solution can also be used for lead determination mostly without any further dilution. As an application, the cadmium concentrations were measured on two different days at 14 stations of the nationwide sampling network, and the influence of nonferrous industries on the cadmium levels is shown.     

Development of a slurry atomization method for the determination of cadmium in food samples by electrothermal atomization atomic-absorption spectrometry

Matrix modifiers have been compared for the determination of cadmium in foodstuffs by ETA-AAS with the sample injected in the form of a slurry. Addition of 800 mug/ml Pd stabilized cadmium to a similar extent as did ammonium dihydrogen phosphate, but avoided the increase in background signal associated with the latter. An analytical procedure was developed, based on palladium matrix modification, platform atomization with a pre-atomization cooling step and integrated absorbance measurements. The method allowed the analysis of milk, liver and olive leaf slurries at concentrations up to at least 50 mg/ml by direct calibration with aqueous standards. The accuracy of the analytical results was within 15% and the detection limit for cadmium in analysis of a 50 mg/ml slurry was 10 ng/g.     

Eine einfache Methode zur Bestimmung von Cadmium in Harn

Zusammenfassung Cadmium bildet negativ geladene Jodidkomplexe, die eine Abtrennung dieses Elementes aus dem Harn mit Hilfe eines Anionen-austauschers ermöglichen. Elution vom Austauscher ergibt eine Cadmiumlösung mit nur wenigen Begleitstoffen bzw. einer einheitlichen Matrix, die für eine weitgehend störungsfreie Endbestimmung durch flammenlose Atomabsorptionsspektrometrie verwendet werden kann. Danach beträgt der Normalgehalt an Cadmium im Harn im Mittel 0,78±0,53 ng/ml und liegt im Bereich zwischen 0,22 und 1,7 ng/ml.

---

A simple method for determination of cadmium in urine

Summary Cadmium can be isolated from urine by formation of negatively charged iodide complexes bound to an anion exchange resin. Elution from the resin gives a cadmium solution with only a few concomitant substances in an uniform matrix. Thus an undisturbed determination by flameless atomic absorption spectrometry is achieved. The mean of the natural cadmium level found in urine was 0.78±0.53 ng/ml, within the normal range between 0.22 and 1.7 ng/ml.