Synthesis of vanadium(III) complexes bearing iminopyrrolyl ligands and their role as thermal robust ethylene (co)polymerization catalysts

Bis(imino)pyrrolyl vanadium(III) complexes 2a-e [2,5-C(4)H(2)N(CH=NR)(2)]VCl(2)(THF)(2) [R = C(6)H(5) (2a), 2,6-Me(2)C(6)H(3) (2b), 2,6-(i)Pr(2)C(6)H(3) (2c), 2,4,6-Me(3)C(6)H(2) (2d), C(6)F(5) (2e)] and bis(iminopyrrolyl) vanadium(III) complex 4f [C(4)H(3)N(CH=N-2,6-(i)PrC(6)H(3))](2)VCl(THF) have been prepared in good yields from VCl(3)(THF)(3) by treating with 1.0 and 2.0 equivalent deprotonated ligands in tetrahydrofuran (THF), respectively. These complexes were characterized by FTIR and mass spectra as well as elemental analysis. Structures of 2c and 4f were further confirmed by X-ray crystallographic analysis. DFT calculations indicated the configurations of 2a-e with two nitrogen atoms of the chelating ligand coordinating with vanadium metal centre were more stable in energy. These complexes were employed as catalysts for ethylene polymerization at various reaction conditions. On activation with Et(2)AlCl, these complexes exhibited high catalytic activities (up to 22.2 kg mmol(-1)(V) h(-1) bar(-1)) even at high temperature, suggesting these catalysts possessed remarkable thermal stability. Moreover, high molecular weight polymer with unimodal molecular weight distributions can be obtained, indicating the polymerization took place in a single-site nature. The copolymerizations of ethylene and 1-hexene with precatalysts 2a-e and 4f were also explored in the presence of Et(2)AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.     

Mechanistic studies of ethylene hydrophenylation catalyzed by bipyridyl Pt(II) complexes

Cationic platinum(II) complexes [((t)bpy)Pt(Ph)(L)](+) [(t)bpy =4,4'-di-tert-butyl-2,2'-bipyridyl; L = THF, NC(5)F(5), or NCMe] catalyze the hydrophenylation of ethylene to generate ethylbenzene and isomers of diethylbenzene. Using ethylene as the limiting reagent, an 89% yield of alkyl arene products is achieved after 4 h at 120 °C. Catalyst efficiency for ethylene hydrophenylation is diminished only slightly under aerobic conditions. Mechanistic studies support a reaction pathway that involves ethylene coordination to Pt(II), insertion of ethylene into the Pt-phenyl bond, and subsequent metal-mediated benzene C-H activation. Studies of stoichiometric benzene (C(6)H(6) or C(6)D(6)) C-H/C-D activation by [((t)bpy)Pt(Ph-d(n))(THF)](+) (n = 0 or 5) indicate a k(H)/k(D) = 1.4(1), while comparative rates of ethylene hydrophenylation using C(6)H(6) and C(6)D(6) reveal k(H)/k(D) = 1.8(4) for the overall catalytic reaction. DFT calculations suggest that the transition state for benzene C-H activation is the highest energy species along the catalytic cycle. In CD(2)Cl(2), [((t)bpy)Pt(Ph)(THF)][BAr'(4)] [Ar' = 3,5-bis(trifluoromethyl)phenyl] reacts with ethylene to generate [((t)bpy)Pt(CH(2)CH(2)Ph)(η(2)-C(2)H(4))][BAr'(4)] with k(obs) = 1.05(4) × 10(-3) s(-1) (23 °C, [C(2)H(4)] = 0.10(1) M). In the catalytic hydrophenylation of ethylene, substantial amounts of diethylbenzenes are produced, and experimental studies suggest that the selectivity for the monoalkylated arene is diminished due to a second aromatic C-H activation competing with ethylbenzene dissociation.     

A mechanistic investigation of the polymerization of ethylene catalyzed by neutral Ni(II) complexes derived from bulky anilinotropone ligands

An extensive mechanistic investigation has been carried out on ethylene polymerizations catalyzed by neutral Ni(II) catalysts derived from bulky anilinotropone ligands. Complexes and precatalysts prepared include aryl derivatives [(2,6-i-Pr(2)C(6)H(3))NC(7)H(4)O(7-Aryl)Ni(Ph)(PPh(3))] (9, Aryl = phenyl(a), 1-naphthyl(b), p-methoxyphenyl(c), p-trifluoromethylphenyl(d)), alkyl derivatives [[(2,6-(i)Pr(2)C(6)H(3))NC(7)H(5)O]Ni(R)(2,4-lutidine)] (16, R = Et (a), n-Pr (b)) and [[(2,6-(i)Pr(2)C(6)H(3))NC(7)H(5)O]Ni(R)(PPh(3))] (17, R = Et (a), n-Pr (b), n-hexyl (c), i-Pr (d)), and the nickel hydride complex [[(2,6-(i)Pr(2)C(6)H(3))NC(7)H(5)O]Ni(H)(PPh(3))], 20. Branched polyethylenes are produced at 40-80 degrees C in toluene with M(n) values in the 100-200K range and molecular weight distributions of ca. 1.4-2.2. Branching ranges from 15 to 64 branches/1000 carbons depending on temperature and ethylene pressure. The electron-withdrawing -CF(3) substituent on the 7-aryl group increases activity but has little effect on branching and molecular weight. NMR experiments establish that in the case of the PPh(3)-substituted systems, the catalyst rests as an equilibrating mixture of the alkyl phosphine and the alkyl ethylene complexes. At high ethylene pressures, the turnover frequency saturates, indicating that the equilibrium has shifted nearly completely to the alkyl olefin complex. Under these conditions, the barriers to migratory insertion were determined to be ca. 16-17 kcal/mol for 9a, 9c, 9d, and 16a. Extraction of 2,6-lutidine from complexes 16a,b yields highly dynamic beta-agostic alkyl complexes [[(2,6-i-Pr(2)C(6)H(3))NC(7)H(5)O]Ni(Et)] 21 and [[(2,6-i-Pr(2)C(6)H(3))NC(7)H(5)O]Ni(i-Pr)] 22. Free energy barriers to nickel-carbon bond rotation and beta-hydride elimination of 11.1 and ca. 17 kcal/mol, respectively, were determined for 22. Themolysis of 17c at 50 degrees C generates hydride 20 and hexene and occurs by two pathways, one independent of [PPh(3)] and one retarded by PPh(3). At much slower rates, hydride 20 reductively eliminates free ligand, which ultimately generates a bis-ligand complex, 25. Catalyst decay under polymerization conditions was shown to occur by a similar process to generate free ligand and a bis-ligand complex formed by reaction of free ligand with an active catalyst species. The major chain transfer route is a simple beta-elimination process, not chain transfer to monomer.     

Alkylidene and metalacyclic complexes of tungsten that contain a chiral biphenoxide ligand. synthesis,asymmetric ring-closing metathesis,and mechanistic investigations

Two complexes that contain the racemic or enantiomerically pure (S) form of the 3,3'-di-tert-butyl-5,5',6,6'-tetramethyl-1,1'-biphenyl-2,2'-diolate (Biphen(2-)) ligand, W(NAr)(CHCMe(2)Ph)(Biphen) (2a) and W(NAr')(CHCMe(2)Ph)(Biphen) (2b) (Ar = 2,6-i-Pr(2)C(6)H(3); Ar' = 2,6-Me(2)C(6)H(3)), were prepared and shown to be viable catalysts for several representative ring-closing reactions to give products in good yields in most cases and high % ee in asymmetric reactions. Exploration of the reaction between 2a and a stoichiometric amount of one desymmetrization substrate allowed two intermediate tungstacyclobutane complexes to be observed, in addition to the final and quite stable tungstacyclobutane complex formed in a reaction between the ring-closed product and a tungsten methylene complex. Reactions involving (13)C labeled ethylene allowed for the observation of an unsubstituted tungstacyclobutane complex, an ethylene complex, an unsubstituted tungstacyclopentane complex, and a heterochiral dimeric form of a methylene complex. The tungstacyclopentane complex was found to catalyze the dimerization of ethylene to 1-butene slowly.     

Synthesis and characterisation of mixed ligand Pt(II) and Pt(IV) oxadiazoline complexes

The nitrile ligands in trans-[PtX2(PhCN)2] (X = Cl, Br, I) undergo sequential 1,3 dipolar cycloadditions with nitrones R1R2C=N+(Me)-O(-) (R1 = H, R2 = Ph; R1 = CO2Et, R2 = CH2CO2Et) to selectively form the Delta4-1,2,4-oxadiazoline complexes trans-[PtX2(PhCN) (N=C(Ph)-O-N(Me)-CR1R2)] or trans-[PtX2(N=C(Ph)-O-N(Me)-CR1R2)2] in high yields. The reactivity of the mixed ligand complexes trans-[PtX2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] towards oxidation and ligand substitution was studied in more detail. Oxidation with Cl2 or Br2 provides the Pt(IV) species trans-[PtX2Y2(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] (X, Y = Cl, Br). The mixed halide complex (X = Cl, Y = Br) undergoes halide scrambling in solution to form trans-[PtX(4-n)Yn(PhCN)(N=C(Ph)-O-N(Me)-CH(Ph))] as a statistical mixture. Ligand substitution in trans-[PtCl2(PhCN)(N=C(Ph)-O-N(Me)-CR1R2)] allows for selective replacement of the coordinated nitrile by nitrogen heterocycles such as pyridine, DMAP or 1-benzyl-2-methylimidazole to produce mixed ligand Pt(II) complexes of the type trans- [PtX2(heterocycle)(N=C(Ph)-O-N(Me)-CR1R2)]. All compounds were characterised by elemental analysis, mass spectrometry, IR and 1H, 13C and 195Pt NMR spectroscopy. Single-crystal X-ray structural analysis of (R,S)-trans-[PtBr2(N=C(Ph)-O-N(Me)-CH(Ph))2] and trans-[PtCl2(C5H5N)(N=C(Ph)-O-N(Me)-CH(Ph))] confirms the molecular structure and the trans configuration of the heterocycles relative to each other.     

Unusual reaction between (nitrile)Pt complexes and pyrazoles: substitution proceeds via metal-mediated nitrile-pyrazole coupling followed by elimination of the nitrile

The reaction of platinum(IV) complex trans-[PtCl4(EtCN)2] with pyrazoles 3,5-RR'pzH (R/R' = H/H, Me/H, Me/Me) leads to the formation of the trans-[PtCl4{NH=C(Et)(3,5-RR'pz)}2] (1-3) species due to the metal-mediated nitrile-pyrazole coupling. Pyrazolylimino complexes 1-3 (i) completely convert to pyrazole complexes cis-[PtCl4(3,5-RR'pzH)2] by elimination of EtCN upon reflux in a CH2Cl2 solution or upon heating in the solid state; (ii) undergo exchange at the imino C atom with another pyrazole different from that contained in the pyrazolylimino ligand. The reaction of trans-[PtIICl2(EtCN)2] and 3,5-RR'pzH, conducted under conditions similar to those for trans-[PtIVCl4(EtCN)2], is much less selective, and the composition of the products strongly depends on the pyrazole employed: (a) with pzH, the reaction gives a mixture of three products, i.e., [PtCl2NH=C(Et)pz-kappa2N,N}] (4), [PtCl(pzH){NH=C(Et)pz-kappa2N,N}]Cl (5), and [Pt(pzH)2{NH=C(Et)pz-kappa2N,N}]Cl2 (6) (complexes 5 and 6 are rather unstable and gradually transform to trans-[PtCl2(pzH2] and [Pt(pzH)(4)]Cl(2) and free EtCN); (b) with 3,5-Me(2)pzH, the reaction leads to the formation of [PtCl2NH=C(Et)(3,5-Me2pz)-kappa2N,N}] (7) and [PtCl(3,5-Me2pzH)3]Cl (8); (c) in the case of asymmetric pyrazole 3(5)-MepzH, which can be added to EtCN and/or bind metal centers by any of the two nonequivalent nitrogen sites, a broad mixture of currently unidentified products is formed. The reduction of 1-3 with Ph3P=CHCO2Me in CHCl3 allows for the formation of corresponding platinum(II) compounds trans-[PtCl2{NH=C(Et)(3,5-RR'pz)}2] (9-11). Ligands NH=C(Et)(3,5-RR'pz) (12-14) were almost quantitatively liberated from 9-11 with 2 equiv of 1,2-bis-(diphenylphosphino)ethane in CDCl3, giving free imines 12-14 in solution and the precipitate of trans-[Pt(dppe)2](Cl)2. Pyrazolylimines 12-14 undergo splitting in CDCl3 solution at 20-25 degrees C for ca. 20 h to furnish the parent propiononitrile and the pyrazole 3,5-RR'pzH, but they can be synthetically utilized immediately after the liberation.     

Novel tailoring reaction for two adjacent coordinated nitriles giving platinum 1,3,5-triazapentadiene complexes

The tailoring reaction of the two adjacent nitrile ligands in cis-[PtCl(2)(RCN)(2)] (R = Me, Et, CH(2)Ph, Ph) and [Pt(tmeda)(EtCN)(2)][SO(3)CF(3)](2) (8.(OTf)(2); tmeda = N,N,N',N'-tetramethylethylenediamine) upon their interplay with N,N'-diphenylguanidine (DPG; NH=C(NHPh)(2)), in a 1:2 molar ratio gives the 1,3,5-triazapentadiene complexes [PtCl(2){NHC(R)NHC(R)=NH}] (1-4) and [Pt(tmeda){NHC(Et)NHC(Et)NH}][SO(3)CF(3)](2) (10.(OTf)(2)), respectively. In contrast to the reaction of 8.(OTf)(2) with NH=C(NHPh)(2), interaction of 8.(OTf)(2) with excess gaseous NH(3) leads to formation of the platinum(II) bis(amidine) complex cis-[Pt(tmeda){NH=C(NH(2))Et}(2)][SO(3)CF(3)](2) (9.(OTf)(2)). Treatment of trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) with 2 equiv of NH=C(NHPh)(2) in EtCN (R = Et) and CH(2)Cl(2) (R = CH(2)Ph, Ph) solutions at 20-25 degrees C leads to [PtCl{NH=C(R)NC(NHPh)=NPh}(RCN)] (11-13). When any of the trans-[PtCl(2)(RCN)(2)] (R = Et, CH(2)Ph, Ph) complexes reacts in the corresponding nitrile RCN with 4 equiv of DPG at prolonged reaction time (75 degrees C, 1-2 days), complexes containing two bidentate 1,3,5-triazapentadiene ligands, i.e. [Pt{NH=C(R)NC(NHPh)=NPh}(2)] (14-16), are formed. Complexes 14-16 exhibit strong phosphorescence in the solid state, with quantum yields (peak wavelengths) of 0.39 (530 nm), 0.61 (460 nm), and 0.74 (530 nm), respectively. The formulation of the obtained complexes was supported by satisfactory C, H, and N elemental analyses, in agreement with FAB-MS, ESI-MS, IR, and (1)H and (13)C{(1)H} NMR spectra. The structures of 1, 2, 4, 11, 13, 14, 9.(picrate)(2), and 10.(picrate)(2) were determined by single-crystal X-ray diffraction.     

Reactions of vinyl acetate and vinyl trifluoroacetate with cationic diimine Pd(II) and Ni(II) alkyl complexes: identification of problems connected with copolymerizations of these monomers with ethylene

Vinyl acetate (VA) and vinyl trifluoroacetate (VA(f)) react with [(NwedgeN)Pd(Me)(L)][X] (M = Pd, Ni, (NwedgeN) = N,N'-1,2-acenaphthylenediylidene bis(2,6-dimethyl aniline), Ar(f) = 3,5-trifluoromethyl phenyl, L = Ar(f)CN, Et2O; X = B(Ar(f))4-, SbF6-) to form pi-adducts 3 and 5 at -40 degrees C. Binding affinities relative to ethylene have been determined. Migratory insertion occurs in a 2,1 fashion (DeltaG++ = 19.4 kcal/mol, 0 degrees C for VA, and 17.4 kcal/mol, -40 degrees C for VA(f)) to yield five-membered chelate complexes [(NwedgeN)Pd(kappa2-CH(Et)(OC(O)-CH3))]+, 4, and [(NwedgeN)Pd(kappa2-CH(Et)(OC(O)CF3))]+, 6. When VA is added to [(NwedgeN)Ni(CH3)]+, an equilibrium mixture of an eta2 olefin complex, 8c, and a kappa-oxygen complex, 8o, results. Insertion occurs from the eta2 olefin complex, 8c (DeltaG++ = 15.5 kcal/mol, -51 degrees C), in both a 2,1 and a 1,2 fashion to generate a mixture of five- and six-membered chelates, 9(2,1) and 9(1,2). VA(f) inserts into the Ni-CH3 bond (-80 degrees C) to form a five-membered chelate with no detectable intermediate. Thermolysis of the Pd chelates results in beta-acetate elimination from 4 (DeltaG++ = 25.5 kcal/mol, 60 degrees C) and beta-trifluoroacetate elimination from 6 (DeltaG = 20.5 kcal/mol, 10 degrees C). The five-membered Ni chelate, 9(2,1), is quite stable at room temperature, but the six-membered chelate, 9(1,2), undergoes beta-elimination at -34 degrees C. Treatment of the OAc(f) containing Pd chelate 6 with ethylene results in complete opening to the pi-complex [(NwedgeN)Pd(kappa2-CH(Et)(OAc(f)))(CH2CH2)]+ (OAc(f) = OC(O)CF3), 18, while reaction of the OAc containing Pd chelate 4 with ethylene establishes an equilibrium between 4 and the open form 16, strongly favoring the closed chelate 4 (DeltaH = -4.1 kcal/mol, DeltaS = -23 eu, K = 0.009 M(-1) at 25 degrees C). The open chelates undergo migratory insertion at much slower rates relative to those of the simple (NwedgeN)Pd(CH3)(CH2CH2)+ analogue. These quantitative studies provide an explanation for the behavior of VA and VA(f) in attempted copolymerizations with ethylene.     

Kinetic and mechanistic study of the Pt(II) versus Pt(IV) effect in the platinum-mediated nitrile-hydroxylamine coupling

The metal-mediated coupling between coordinated EtCN in the platinum(II) and platinum(IV) complexes cis- and trans-[PtCl(2)(EtCN)(2)], trans-[PtCl(4)(EtCN)(2)], a mixture of cis/trans-[PtCl(4)(EtCN)(2)] or [Ph(3)PCH(2)Ph][PtCl(n)(EtCN)] (n = 3, 5), and dialkyl- and dibenzylhydroxylamines R(2)NOH (R = Me, Et, CH(2)Ph, CH(2)C(6)H(4)Cl-p) proceeds smoothly in CH(2)Cl(2) at 20-25 degrees C and the subsequent workup allowed the isolation of new imino species [PtCl(n){NH=C(Et)ONR(2)}(2)] (n = 2, R = Me, cis-1 and trans-1; Et, cis-2 and trans-2; CH(2)Ph, cis-3 and trans-3; CH(2)C(6)H(4)Cl-p, cis-4 and trans-4; n = 4, R = Me, trans-9; Et, trans-10; CH(2)Ph, trans-11; CH(2)C(6)H(4)Cl-p, trans-12) or [Ph(3)PCH(2)Ph][PtCl(n){NH=C(Et)ONR(2)}] (n = 3, R = Me, 5; Et, 6; CH(2)Ph, 7; CH(2)C(6)H(4)Cl-p, 8; n = 5, R = Me, 13; Et, 14; CH(2)Ph, 15; CH(2)C(6)H(4)Cl-p, 16) in excellent to good (95-80%) isolated yields. The reduction of the Pt(IV) complexes 9-16 with the ylide Ph(3)P=CHCO(2)Me allows the synthesis of Pt(II) species 1-8. The compounds 1-16 were characterized by elemental analyses (C, H, N), FAB-MS, IR, (1)H, (13)C{(1)H}, and (31)P{(1)H} NMR (the latter for the anionic type complexes 5-8 and 13-16) and by X-ray crystallography for the Pt(II) (cis-1, cis-2, and trans-4) and Pt(IV) (15) species. Kinetic studies of addition of R(2)NOH (R = CH(2)C(6)H(4)Cl-p) to complexes [Ph(3)PCH(2)Ph][Pt(II)Cl(3)(EtCN)] and [Ph(3)PCH(2)Ph][Pt(IV)Cl(5)(EtCN)] by the (1)H NMR technique revealed that both reactions are first order in (p-ClC(6)H(4)CH(2))(2)NOH and Pt(II) or Pt(IV) complex, the second-order rate constant k(2) being three orders of magnitude larger for the Pt(IV) complex. The reactions are intermolecular in nature as proved by the independence of k(2) on the concentrations of added EtC triple bond N and Cl(-). These data and the calculated values of Delta H++ and Delta S++ are consistent with the mechanism involving the rate-limiting nucleophilic attack of the oxygen of (p-ClC(6)H(4)CH(2))(2)NOH at the sp-carbon of the C triple bond N bond followed by a fast proton migration.     

Microwave synthesis of mono- and bis-tetrazolato complexes via 1,3-dipolar cycloaddition of organonitriles with platinum(II)-bound azides

[2 + 3] Cycloaddition reactions of the diazidoplatinum(II) complexes cis-[Pt(N3)2(PPh3)2] 1 and cis-[Pt(N3)2(2,2'-bipy)] 4 with organonitriles NCR 2 give the bis(tetrazolato) complexes trans-[Pt(N4CR)2(PPh3)2] 3 [R = Me (3a), Et (3b), Pr (3c), Ph (3d), 4-ClC6H4 (3e)] and cis-[Pt(N4CR)2(2,2'-bipy)] 5 [R = Me (5a), Et (5b), Pr (5c), Ph (5d)]. The reaction of cis-[Pt(N3)2(PPh3)2] I with propionitrile also affords, apart from 3b, the unexpected mixed cyano-tetrazolato complex trans-[Pt(CN)(5-ethyltetrazolato)(PPh3)2] 3b' which is derived from the reaction of the bis(tetrazolato) 3b with propionitrile, with concomitant formation of 5-ethyl-1H-tetrazole, via a suggested unusual oxidative addition of the nitrile to PtII. All these reactions are greatly accelerated by microwave irradiation and this method also shows a higher selectivity in the case of the reaction of propionitrile with 1, leading only to the formation of 3b. All the complexes obtained were characterized by IR, 1H, 13C and 31P[1H] (for complexes 3) NMR spectroscopies, FAB-MS and elemental analyses. Complexes 3b', 3d, 3e and 5d were also characterized by X-ray structural analyses.     

Copolymerization of ethylene with polar monomers: chain propagation and side reactions. A DFT theoretical study using zwitterionic Ni(II) and Pd(II) catalysts

Calculations utilizing anionic substituted derivates of the cationic N(wedge)N--Ni(II) and Pd(II) diimine Brookhart complex have been carried out on the barriers of ethylene and acrylonitrile insertion into a M- methyl, propyl and CH(CN)Et bond for M = Ni, Pd. The possibility of side reactions such as chelate formation with the polar functionality and oligomerization of the active species after acrylonitrile insertion are explored. The diimine ring system N--N = -NR' 'CR(1)CR(2)NR' ' with R' ' = 2,6-C(6)H(3)(i-Pr)(2) and R(1),R(2) = Me was functionalized by adding one or two anionic groups (BF(3)(-), etc.) in place of i-Pr on the aryl rings or by replacing one Me diimine backbone group (R(1)) with BH(3)(-). The objective of this investigation is computationally to design catalysts for ethylene/acrylonitrile copolymerization that have activities that are comparable to that of the cationic Ni(II) diimine or at least the Pd(II) diimine Brookhart system for ethylene homopolymerization. Complexes that might meet this objective are discussed.     

Gold(I) ethylene and copper(I) ethylene complexes supported by a polyhalogenated triazapentadienyl ligand

A rare gold(I) ethylene complex and the closely related copper(I) ethylene adduct have been isolated using [N{(C3F7)C(2,6-Cl2C6H3)N}2]- as the supporting ligand. [N{(C3F7)C(2,6-Cl2C6H3)N}2]Au(C2H4) (1) is an air-stable solid. It features a U-shaped triazapentadienyl ligand backbone and a three-coordinate, trigonal-planar gold center. The copper(I) adduct [N{(C3F7)C(2,6-Cl2C6H3)N}2]Cu(C2H4) (2) also has a similar structure. The 13C NMR signal corresponding to the ethylene carbons of 1 appears at about 64 ppm upfield from the free ethylene, while the ethylene carbons of 2 show a relatively smaller (39 ppm) upfield shift. [N{(C3F7)C(2,6-Cl2C6H3)N}2]M(C2H4) (M=Cu, Au) mediate carbene-transfer reactions from ethyl diazoacetate to saturated and unsaturated hydrocarbons.     

Regioselective HON-addition of bifunctional hydrazone oximes to Pt(IV)-bound nitriles

Treatment of trans-[PtCl(4)(RCN)(2)](R = Me, Et) with the hydrazone oximes MeC(=NOH)C(R')=NNH(2)(R' = Me, Ph) at 45 degrees C in CH(2)Cl(2) led to the formation of trans-[PtCl(4)(NH=C(R)ON=C(Me)C(R')=NNH(2))(2)](R/R' = Me/Ph 1, Et/Me 2, Et/Ph 3) due to the regioselective OH-addition of the bifunctional MeC(=NOH)C(R')=NNH(2) to the nitrile group. The reaction of 3 and Ph(3)P=CHCO(2)Me allows the formation of the Pt(II) complex trans-[PtCl(2)(NH=C(Et)ON=C(Me)C(Ph)=NNH(2))2](4). In 4, the imine ligand was liberated by substitution with 2 equivalents of bis(1,2-diphenylphosphino)ethane (dppe) in CDCl(3) to give, along with the free ligand, the solid [Pt(dppe)(2)]Cl(2). The free iminoacyl hydrazone, having a restricted life-time, decomposes at 20-25 degrees C in about 20 h to the parent organonitrile and the hydrazone oxime. The Schiff condensation of the free NH(2) groups of 4 with aromatic aldehydes, i.e. 2-OH-5-NO(2)-benzaldehyde and 4-NO(2)-benzaldehyde, brings about the formation of the platinum(II) complexes trans-[PtCl(2)(NH=C(Et)ON=C(Me)C(Ph)=NN=CH(C(6)H(3)-2-OH-5-NO(2))2](5) and trans-[PtCl(2)(NH=C(Et)ON=C(Me)C(Ph)=NN=CH(C(6)H(4)-4-NO(2))2](6), respectively, containing functionalized remote peripherical groups. Metallization of 5, which can be considered as a novel type of metallaligand, was achieved by its reaction with M(OAc)(2).nH(2)O (M = Cu, n= 2; M = Co, n= 4) in a 1:1 molar ratio furnishing solid heteronuclear compounds with composition [Pt]:[M]= 1:1. The complexes were characterized by C, H, N elemental analyses, FAB+ mass-spectrometry, IR, 1H, 13C[1H] and (195)Pt NMR spectroscopies; X-ray structures were determined for 3, 4 and 5.     

Amidines derived from Pt(IV)-mediated nitrile-amino alcohol coupling and their Zn(II)-catalyzed conversion into oxazolines

The reaction between the platinum(IV) complex trans-[PtCl(4)(EtCN)(2)] and the amino alcohols NH(2)CH(2)CH(2)OH, NH(2)CH(2)CH(Me)OH-(R)-(-), NH(2)CH(Ph)CH(2)OH-(R)-(-), NH(2)CH(Et)CH(2)OH-(R)-(-), NH(2)CH(Et)CH(2)OH-(S)-(+), and NH(2)CH(Pr(n)())CH(2)OH proceeds rapidly at room temperature in CH(2)Cl(2) to furnish the amidine complexes [PtCl(4)(HN=C(Et)NH(arcraise;)OH)(2)] (1-6) in good yield (70-80%). The related reaction between the platinum(II) complex trans-[PtCl(2)(EtCN)(2)] and monoethanolamine in a molar ratio of 1:2 in CH(2)Cl(2) results in the addition of 4 equiv of NH(2)CH(2)CH(2)OH per mole of complex to give [Pt(HN=C(Et)NHCH(2)CH(2)OH)(2)(NH(2)CH(2)CH(2)OH)(2)](2+) (7). Formulation of 1-6 is based upon satisfactory C, H, N elemental analyses, electrospray mass spectrometry, IR spectroscopy, and (1)H, (13)C((1)H), (15)N, and (195)Pt NMR spectroscopies, while the structures of trans-[PtCl(4)((Z)-NH=C(Et)NHCH(2)CH(2)OH)(2)] (1), trans-[PtCl(4)((Z)-NH=C(Et)NHCH(2)CH(Me)OH-(R)-(-))(2)] (2), and trans-[PtCl(4)((Z)-NH=C(Et)NHCH(Et)CH(2)OH-(R)-(-))(2)] (4) were determined by X-ray single-crystal diffraction. The Z-amidine configuration of the ligands is preserved in CDCl(3) solutions as confirmed by gradient-enhanced (15)N,(1)H-HMQC spectroscopy and NOE experiments. The amidines, formed upon Pt(IV)-mediated nitrile-amino alcohol coupling, were liberated from their platinum(IV) complexes 1, 3, and 4 by reaction with Ph(2)PCH(2)CH(2)PPh(2) (dppe) giving free NH=C(Et)NHCHRCH(2)OH (R = H 8, Et 9, Ph 10), with the substituents R of different types, and dppe oxides; the P-containing species were identified by (31)P((1)H) NMR spectroscopy. NOESY spectroscopy indicates that the liberated amidines retained the same configuration relative to the C=N double bond, i.e., syn-(H,Et)-NH=C(Et)NHCHRCH(2)OH. The liberated hydroxo-functionalized amidines 8-10 were converted into oxazolines (11-13) in the presence of a catalytic amount of ZnCl(2). A similar catalytic effect has also been reached using anhydrous MSO(4) (M = Cu, Co, Cd), CdCl(2), and AlCl(3).     

Bis(isothiocyanato)bis(phosphine) complexes of group 10 metals: reactivity toward organic isocyanides

Treatment of Ni(NCS)2(PMe2Ph)2 with organic isocyanides CN-R gave five-coordinate isocyanide Ni(II) complexes, Ni(CN-R)(NCS)2(PMe2Ph)2 (R = C6H3-2,6-Me2 (1), t-Bu (2)). Interestingly, the corresponding reaction of Ni(NCS)2(P(n-Pr)3)2 with 2 equiv. of CN-t-Bu gave an unusual compound, which exists as an ion pair of the trigonal bipyramidal cation [Ni(P(n-Pr)3)2(CN-t-Bu)3]2+ (3) and the dinuclear NCS-bridged anion [Ni(1,3-micro-NCS)(NCS)3]2(2-) (4). In contrast, Pd(NCS)2(P(n-Pr)3)2 underwent substitution with 2 equiv. of CN-t-Bu to give the four-coordinate mono(isocyanide) Pd(II) complex Pd(NCS)(SCN)(CN-t-Bu)(P(n-Pr)3) (5) via phosphine dissociation. Reactions of M(NCS)2L2 (M = Pd, Pt; L = PMe3, PEt3, PMePh2, P(n-Pr)3) with two equiv. of CN-R (R = t-Bu, i-Pr, C6H3-2,6-Me2) gave the corresponding bis(isocyanide) complexes [M(CN-R)2(PR3)2](SCN)2 (7-13), except for Pd(NCS)2(PEt3)2 that reacted with CN-R' (R' = i-Pr, C6H3-2,6-Me2) and produced the mono(isocyanide) Pd(II) complexes [Pd(CN-R')(SCN)(PEt3)2](SCN) (14 and 15). Finally, treatment of M(NCS)2(PMe3)2 (M = Ni, Pd, Pt) with sterically bulky isocyanide CN-C6H3-2,6-i-Pr2 gave various products, (16-18) depending on the identity of the metal.     

Polymerization of ethylene molecules chemisorbed on CrOH+ as a model system of chromium-containing catalyst

The reaction process of the production of CrOH(C2H4)2(+) was studied in connection with the ethylene polymerization on a silica-supported chromium oxide catalyst (the Phillips catalyst). Cluster ions CrOH(C2H4)2(+) and CrOH(C4H8)+ were produced by the reactions of CrOH+ with C2H4 (ethylene) and C4H8 (1-butene), respectively, and were allowed to collide with a Xe atom under single collision conditions. The cross section for dissociation of each parent cluster ion was measured as a function of the collision energy (collision-induced dissociation, or CID). It was found that (i) the CID cross section for the production of CrOH+ from CrOH(C2H4)2(+) increases sharply at the threshold energy of 3.16 +/- 0.22 eV and (ii) the CID cross section for the production of CrOH+ and C4H8 from CrOH(C4H8)+ also increases sharply at the threshold energy of 3.26 +/- 0.21 eV. In comparison with the calculations based on a B3LYP hybrid density functional method, it is concluded that two ethylene molecules in CrOH(C2H4)2(+) are polymerized to become 1-butene. The calculation also shows that the dimerization proceeds via CrOH(C2H4)+ (ethylene complex) and CrOH(C2H4)2(+) (ethylene complex), in which the ethylene molecules bind with CrOH+ through a pi-bonding.     

Adding a new dimension to the investigation of platinum-mediated arene C-H activation reactions using 2D NMR exchange spectroscopy. Dynamics of Pt(II) phenyl/benzene site exchange

Protonation of (N-N)PtPh(2) (1; N-N = diimine ArN=CMe-CMe=NAr with Ar = 2,6-Me(2)C(6)H(3) (a), 2,4,6-Me(3)C(6)H(2) (b), 4-Br-2,6-Me(2)C(6)H(2) (c), 3,5-Me(2)C(6)H(3) (d), and 4-CF(3)C(6)H(4) (e)) in the presence of MeCN at ambient temperature generates (N-N)Pt(Ph)(NCMe)(+) (2). At -78 degrees C, protonation of 1a yielded (N-N)PtPh(2)(H)(NCMe)(+) (3a), which produced benzene and 2a at ca. -40 degrees C. Protonation of 1a-e in CD(2)Cl(2)/Et(2)O-d(10) furnished (N-N)Pt(C(6)H(5))(eta(2)-C(6)H(6))(+) (4a-e). The pi-benzene complexes 4a-c, sterically protected at Pt, eliminate benzene at ca. 0 degree C. The sterically less protected 4d-e lose benzene already at -30 degrees C. SST and 2D EXSY NMR demonstrate that phenyl and pi-benzene ligand protons undergo exchange with concomitant symmetrization of the diimine ligand, most likely via oxidative insertion of Pt into a C-H bond of coordinated benzene. The kinetics of the exchange processes for 4a-c were probed by quantitative EXSY spectroscopy, resulting in DeltaH() of 70-72 kJ mol(-1) and DeltaS of 37-48 J K(-1) mol(-1). A large, strongly temperature-dependent H/D kinetic isotope effect (9.7 at -34 degrees C; 6.9 at -19 degrees C) was measured for the dynamic behavior of 4a versus 4a-d(10), consistent with the proposed pi-benzene C-H bond cleavage. The fact that the pi-benzene complex 4a is thermally more robust in the absence of MeCN than is the Pt(IV) hydridodiphenyl complex 3a in the presence of MeCN agrees with the notion that arene elimination from Pt(IV) hydridoaryl complexes occurs via Pt(II) pi-arene intermediates that eliminate the hydrocarbon associatively, in this case, promoted by MeCN. Compounds 1a, 1b, 1d, 2a, and 2b have been crystallographically characterized.     

The first examples of metal-mediated addition of a phosphorus imine to nitriles; the preparation and X-ray crystal structures of [PtCl4{NH=C(Et)N=PPh3}2] and [PtCl2(EtCN){NH=C(Et)N[double bond, length as m-dash]PPh3}

Imino(triphenyl)phosphorane, Ph3P=NH (1), reacts with nitrile complexes of Pt(IV) to generate hydrolytically sensitive [PtCl4{NH=C(R)N=PPh3}2](R=Me 2a, Et 2b, Ph 2c), and with the Pt(II) complex [PtCl2(EtCN)2] to give [PtCl2(EtCN){NH=C(Et)N=PPh3}](3) and [PtCl2{NH=C(Et)N=PPh3}2](4); X-ray crystallography performed upon (2b) and (3) confirms the presence of an imine/nitrile addition ligand bound by the terminal nitrogen.     

Synthesis, structure, and photophysical properties of luminescent platinum(II) complexes containing cyclometalated 4-styryl-functionalized 2-phenylpyridine ligands

A series of new luminescent cyclometalated platinum(II) complexes functionalized with various substituted styryl groups on the cyclometallating ligand [Pt(C/\N-ppy-4-styryl-R)(O/\O-(O)CCR'CHCR'C(O))] (ppy-4-styryl-R = E-4(4-(R)styryl-2-phenylpyridine) (3, R' = Me (acac); 4, R' = (t)Bu (dpm); R = H, OMe, NEt2, NO2) have been prepared. All complexes undergo an E-Z photoisomerization process in CH2Cl2 solution under sunlight, as monitored by 1H NMR. The solid-state structures of 3-OMe, 3-NEt2, 3-NO2, and 4-OMe have been determined by X-ray diffraction studies and compare well with optimized geometries obtained by density functional theory (DFT) calculations. The orbital pictures of 3-H, 3-OMe, and 3-NO 2 are very similar, the highest occupied molecular orbital (HOMO) being highly Pt(5d) metal-based. For 3-NMe2, an additional contribution from the amino-styryl fragment leads to a decreased metal parentage of the HOMO, suggesting a predominantly ILCT character transition. Complexes 3-H, 3-OMe, and 3-NO2 show a low-energy band (350-400 nm) assigned to predominantly charge-transfer transitions. The amino derivative 3-NEt2 displays a very strong absorption band at 432 nm, tentatively assigned to a mixture of ILCT (Et2N --> CH=CH) and metal-to-ligand charge-transfer (MLCT) (dpi(Pt) --> pi) transitions. Complexes 3 are weakly luminescent in CH2Cl2 solution at room temperature; the low intensity may be due to a competitive quenching through the E-Z photoisomerization process. All complexes exhibit similar structured emission bands under these conditions (around 520 nm), independent of the nature of the styryl-R group. In a frozen EPA glass (77 K), the spectrum of the representative complex 3-H exhibits two sets of vibronically structured bands (460-560, 570-800 nm; lambda(max) = 596 nm), due to the presence of two emitting species, the E and Z isomers, which have significantly different triplet excited-state energies. The other three complexes show similar behavior to 3-H at 77 K, but the lower-energy emission bands are progressively red-shifted in the order H < OMe < NO2 < NEt2 (e.g., for 3-NEt2, lambda(max)(em) = 658 nm; tau = 26 micros). The very large red-shift compared to related unsubstituted complexes (e.g., to [Pt(C/\N-ppy)(O/\O-acac)]) is the result of the extension of the pi-conjugated system and the electronic effects of substituent R.     

Synthesis and investigation of [Cp(PMe(3))Rh(H)(H(2))](+) and its partially deuterated and tritiated isotopomers: evidence for a hydride/dihydrogen structure

Hydrogenolysis of [Cp(PMe(3))Rh(Me)(CH(2)Cl(2))](+)BAr'(4)(-) (4, Ar' = 3,5-C(6)H(3)(CF(3))(2)) in dichloromethane afforded the nonclassical polyhydride complex [Cp*PMe(3))Rh(H)(H(2))](+)BAr'(4)(-) (1), which exhibits a single hydride resonance at all accessible temperatures in the (1)H NMR spectrum. Exposure of solutions of 1 to D(2) or T(2) gas resulted in partial isotopic substitution in the hydride sites. Formulation of 1 as a hydride/dihydrogen complex was based upon T(1) (T(1)(min) = 23 ms at 150 K, 500 MHz), J(H-D) (ca. 10 Hz), and J(H-T) (ca. 70 Hz) measurements. The barrier (Delta G(++)) to exchange of hydride with dihydrogen sites was determined to be less than ca. 5 kcal/mol. Protonation of Cp(PMe(3))Rh(H)(2) (2) using H(OEt(2))(2)BAr'(4) resulted in binuclear species [(Cp(PMe(3))Rh(H))(2)(mu-H)](+)BAr'(4)(-) (3), which is formed in a reaction involving 1 as an intermediate. Complex 3 contains two terminal hydrides and one bridging hydride ligand which exchange with a barrier of 9.1 kcal/mol as observed by (1)H NMR spectroscopy. Additionally, the structures of 3 and 4, determined by X-ray diffraction, are reported.