球形氯化镁载体与四氯化钛反应的载钛过程研究

球形氯化镁载体型齐格勒-纳塔催化剂是目前常用的工业聚烯烃催化剂,由于制备工艺对催化剂性能影响很大,因此对此类催化剂制备过程的研究具有重要意义。本文利用自制球形氯化镁载体与四氯化钛反应制备球形聚烯烃催化剂,分析了载钛反应过程的中间产物。对球形氯化镁载体载钛过程中钛含量、比表面、比孔容、晶型等发生的变化进行分析,并研究了邻苯二甲酸二丁酯作为内给电子体在球形氯化镁载体载钛过程中的作用,为球形氯化镁载体型催化剂制备工艺的改进提供了重要参考依据。     

丁氧基氯化钛载体型催化体系用于乙烯/丁烯-1共聚合的研究

<正> 近十几年来有关载体型高效齐格勒-纳塔催化体系用于乙烯共聚合反应有了不少报道,其中尤以氯化镁为载体的体系居多。本文系统地研究了以氯化镁为载体的一系列正丁氧基氯化钛催化体系,在催化乙烯与丁烯-1共聚合反应的动力学行为,以及催化剂     

高效催化剂中给电子体对乙烯聚合动力学行为的影响

<正> 人们发现在制备高效齐格勒—纳塔催化剂时,加入适量的给电子体化合物,可大大地改善催化剂的丙烯聚合定向能力和提高催化活性。最常用的、效果最佳的给电子体为芳香羧酸酯类化合物。然而,催化剂中存在给电子体对乙烯聚合过程的影响文献报道尚少。本文研究了以反应法制备的氯化镁为载体的钛系齐格勒-纳塔催化剂在有(或无)邻苯二甲酸二丁酯(DBP)存在时的组成、结构及其用于乙烯聚合动力学行为的差别。不加     

K.齐格勒博士和G.纳塔博士的业绩

K.齐格勒和G.纳塔两位博士是世界闻名的卓越的化学家,是齐格勒-纳塔型催化剂体系的创始人,也是诺贝尔化学奖的获得者。五十年代中期,由于齐格勒-纳塔型催化剂的出现而使聚烯烃工业崛起,从而使高分子合成材     

聚烯烃催化剂及聚合物新产品研发进展

综述了已广泛应用于聚烯烃行业中聚乙烯和聚丙烯聚合用催化剂的研究进展,重点介绍了齐格勒-纳塔催化剂、茂金属催化剂、铬系催化剂、后过渡金属催化剂、复合型催化剂等催化剂研究方法及应用领域。全面阐述了齐格勒-纳塔催化剂研究趋势,总结了国内聚烯烃催化剂研究现状及应用情况。同时还论述了不同类型聚乙烯和聚丙烯新产品的聚合工艺及研究现状,重点说明了新产品的结构性能及其应用领域。最后展望了聚烯烃领域的某些可能发展方向。     

苯氧基氯化钛载体型催化体系中不同配体对丙烯聚合活性的影响

<正> 配位体是催化剂的重要组成部分,对催化剂的活性,选择性及反应机理都有重要的影响。用不同的配位体来调变齐格勒-纳塔催化剂性能的工作已有一些报道,但研究的角度不尽相同、结论也不完全一致。本文研究了不同取代苯氧基氯化钛载体型催化剂     

高耐压等级聚乙烯管材树脂的研究进展

高耐压等级聚乙烯管材树脂主要用于生产给水管、燃气管及各种工业用管,是一类技术含量较高、市场前景较好的聚乙烯专用树脂。高耐压等级聚乙烯管材树脂多为双峰或多峰结构,采用茂金属催化剂或具有高共聚性能的齐格勒纳塔(Z-N)催化剂双釜或多釜串联聚合生产。本文介绍了高耐压等级聚乙烯管材树脂的分子结构和性能特点,以及制备该类树脂的催化剂和工艺技术,并对国内的相关催化剂及制备技术作了评述。     

茂金属催化剂的负载化

茂金属催化剂是继齐格勒-纳塔催化剂之后的新一代烯烃聚合催化剂,与多活性中心催化剂相比,这种单一活性中心类型的催化剂具有聚合活性较高、聚合物分子量分布较窄等特点。其中,负载化是茂金属催化剂实用化的重要课题,它克服了均相催化体系中聚合物形貌不可控的缺点,降低了助催化剂的用量。近些年来茂金属负载化的研究仍很活跃。本文总结了近十年来茂金属负载化的研究进展,主要对载体的形貌、载体的改性处理、茂金属催化剂的负载方法和负载化茂金属催化剂的应用进行了评述并展望了茂金属催化剂负载化的发展趋势。     

烯烃聚合催化剂和聚合反应

简要叙述了传统齐格勒－－纳塔催化剂的发展和演变,介绍了茂金属催化睡聚烯烃工业的新发展,并对新一代后过渡金属烯烃聚合催化剂的研究进展作了综合评述。     

内给电子体对Ziegler-Natta催化剂性能的影响

研究了5种新型内给电子体对Ziegler-Natta催化剂结构和催化性能的影响.结果表明,使用两种不同制备工艺制备的氯化镁载体均为δ晶型,而不同的内给电子体的加入使得催化剂的氯化镁载体具有不同的微晶结构和形态.在催化剂制备阶段中,内给电子体的加入方式对催化剂的性能有很大的影响.在5种内给电子体中,以cis-1,2-环己二甲酸二异丁酯为内给电子体时,催化剂的聚合活性和PP等规度最高,性能与工业催化剂相当;当选用cis-1,2-环己二甲酸二异丁酯为内给电子体,CMMS为外给电子体,硅钛物质的量之比为10及铝钛物质的量之比为100时,催化剂的聚合活性和PP等规度达到最高.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.