Study of high-performance liquid chromatographic separation of selected herbicides by hydro-methanolic and micellar liquid chromatography using Genapol X-080 non-ionic surfactant as mobile phase constituent

Chromatographic behaviour of six selected herbicides (chlortoluron, metoxuron, chloridazon, simazine, propazine and atrazine) was studied by reversed-phase (RP) high-performance liquid chromatography (HPLC) containing Genapol X-080 non-ionic surfactant as methanol/water mobile phase constituent. The concentration of methanol was changed from 50 to 0% (v/v) for constant 2% (v/v) concentration of the surfactant. The surfactant concentration in purely aqueous micellar mobile phase varied from 1 to 5% (v/v) what is approximately 360-1800 times above the CMC. Within this concentration range Genapol X-080 proves concentration dependent selectivity changes for chlortoluron/atrazine critical pair not occurred in hydro-methanolic mobile phases. Further studies revealed that this chromatographic system offers high compatibility with cloud-point extraction environmental sample pretreatment approaches using Genapol X-080 for the purpose, too.     

Salting-out surfactant extraction of porphyrins and metalloporphyrin from aqueous non-ionic surfactant solutions

A number of cloud point temperature-depressing electrolytes have been investigated for the separation of a non-ionic surfactant (Triton X-100) from aqueous solutions and the corresponding extraction of the organic solutes into the smaller volume surfactant-rich phase using the salting-out method. High extraction efficiencies and preconcentration factors were obtained at room temperature for the extraction of several hydrophilic and hydrophobic metal-free porphyrins (uroporphyrin, coproporphyrin, protoporphyrin and hematoporphyrin) and one metalloporphyrin (iron-protoporphyrin) that were dissolved in the aqueous non-ionic surfactant solutions. Possible mechanisms responsible for the efficient extraction of these important biological molecules into the surfactant-rich layer are discussed.     

Evaluation of the factors affecting extraction of organic compounds based on the acid-induced phase cloud point approach

On the basis of a better analytical exploitation of acid-induced cloud point approach, a systematic study on the phase behaviour of acid aqueous solutions of anionic surfactants and factors affecting anionic surfactant-mediated extractions was performed. The anionic surfactants investigated were alkylsulphonates (ASS) with alkylchain lengths comprised between 8 and 16 carbon atoms. The critical hydrochloric acid concentration (minimal acid concentration required to separation in two liquid phases) was found to increase as alkylchain length of the anionic surfactant increased from 10 to 14. Non-acid-induced liquid-liquid phase separation was observed for sodium octanesulphonate (SOS) or sodium hexadecyl sulphonate (SHS) in the hydrochloric concentration range 0-10 M. Acid aqueous solutions of sodium decylsulphonate (SDeS) and sodium dodecylsulphonate (SDoS) separated into two liquid phases at temperatures ranging between 10 and 80 °C, while temperatures >35 °C were required for sodium tetradecylsulphonate. The influence on extraction efficiency and concentrating ability of experimental variables such as hydrophobicity and concentration of surfactant, nature and concentration of analyte, hydrochloric acid concentration, time and temperature of extraction and time of equilibration and centrifugation was examined. Advantages provided by anionic surfactant-mediated extractions over the use of non-ionic surfactants (cloud point extractions) are discussed.     

Pressurized liquid extraction of ginger (Zingiber officinale Roscoe) with bioethanol: an efficient and sustainable approach

To develop an efficient green extraction approach for recovery of bioactive compounds from natural plants, we examined the potential of pressurized liquid extraction (PLE) of ginger (Zingiber officinale Roscoe) with bioethanol/water as solvents. The advantages of PLE over other extraction approaches, in addition to reduced time/solvent cost, the extract of PLE showed a distinct constituent profile from that of Soxhlet extraction, with significantly improved recovery of diarylheptanoids, etc. Among the pure solvents tested for PLE, bioethanol yield the highest efficiency for recovering most constituents of gingerol-related compounds; while for a broad concentration spectrum of ethanol aqueous solutions, 70% ethanol gave the best performance in terms of yield of total extract, complete constituent profile and recovery of most gingerol-related components. PLE with 70% bioethanol operated at 1500 psi and 100 °C for 20 min (static extraction time: 5 min) is recommended as optimized extraction conditions, achieving 106.8%, 109.3% and 108.0% yield of [6]-, [8]- and [10]-gingerol relative to the yield of corresponding constituent obtained by 8h Soxhlet extraction (absolute ethanol as extraction solvent).     

Comparison of Extraction Techniques and Surfactants for the Isolation of Total Polyphenols and Phlorotannins from the Brown Algae Lobophora variegata

Abstract

Surfactant-mediated extraction (SME), pressurized liquid extraction (PLE), and enzyme-assisted extraction (EAE) have been compared to improve the isolation of phlorotannins from the brown algae Lobophora variegata. Enzymatic treatment with Alcalase 2.4?L FG, Carezyme 4500?L, protease from Streptomyces griseus, pectinase from Aspergillus niger, Celluclast 1.5?L, protease from Bacillus licheniformis; surfactant extraction with triacetin and guaiacol and PLE with ethanol:water as extracting solvent, have been studied in terms of total phenolic content by the Folin–Ciocalteu method and total phlorotannin content using the DMBA assay. The results showed that SME yields the highest amount of phenols and phlorotannins by using food grade guaiacol as the surfactant. An extraction protocol was developed to maximize the amount of extract obtained from L. variegata. The effects of various parameters such as the type of surfactant, efficacy of surfactant, and optimum pH, on the extraction efficiency of polyphenols were examined. The simultaneous use of the enzyme and surfactant was also investigated. However, a synergistic effect between the enzymes and the surfactant for the extraction of polyphenols has not been observed. Considering total phenols and total phlorotannins in the extract, the extraction yield were obtained for total phenols as SME?>?EAE?>?PLE and for total phlorotannins as SME?>?PLE?>?EAE.     

Fluorescence drainage profiles of thin liquid films

Fluorescence drainage-profiles of thin liquid films formed from Rhodamine solutions containing anionic, cationic and non-ionic surfactants have been investigated. It is found that the influence of system variables such as electrolyte concentration, dye concentration, film environment and solution viscosity can be evaluated by means of the profiles. The addition of sodium chloride leads to the expansion (non-ionic surfactant), or contraction (anionic surfactant) of the profiles. In the case of the cationic surfactant, it reduces the number of fringes in the profiles. The height of selected fringes changes linearly with dye concentration, and no fringes are observed when the films are submerged in non-polar solvents. The influence of solution viscosity on film thickness and drainage rate is demonstrated by the number and frequency of fringes in the profile. The formation of first and second "black films" from solutions containing varying concentrations of sodium chloride can be shown.     

Determination of fluorinated surfactants and their metabolites in sewage sludge samples by liquid chromatography with mass spectrometry and tandem mass spectrometry after pressurised liquid extraction and separation on fluorine-modified reversed-phase sorbents

An analytical method was elaborated for simultaneous extraction and determination of fluorinated anionic and non-ionic surfactants in sewage sludge. Surfactant compounds were determined by liquid chromatography-mass spectrometry (LC-MS) after Soxhlet extraction, hot steam extraction and pressurised liquid extraction (PLE) using spiked sludge samples. PLE in a multiple-step procedure consisting of sequential use of ethyl acetate-dimethylformamide and methanol-phosphoric acid resulted in the most efficient extraction procedure. Quantitative analyses of the fluorinated anionic perfluorooctanesulfonate (PFOS) and the partly fluorinated non-ionic alkylpolyglycol ether (FAEO) surfactants were performed by selected ion monitoring LC-MS. Electrospray ionisation or atmospheric pressure chemical ionisation in negative or positive mode was performed. Recoveries between 105 and 120% could be reached. No PFOS and non-ionic FAEO surfactants in concentrations higher than 6 or 10 mg kg(-1) dry matter were observed in real environmental samples. Therefore aerobic and anaerobic biodegradation was performed to investigate the fate of fluorinated surfactants reaching wastewaters. Biological wastewater treatment in laboratory scale under aerobic or anaerobic conditions led to an elimination by biodegradation.     

Surfactant-assisted pressurized liquid extraction for determination of flavonoids from Costus speciosus by micellar electrokinetic chromatography

Micellar electrokinetic chromatography (MEKC), a mode of capillary electrophoresis (CE), is considered an efficient analytical technique allowing for the reduction of organic solvent consumption during the experimental procedure. However, during sample preparation of natural products, the usage of large amount of organic solvent is generally unavoidable. In this article, therefore, a fast, simple, efficient, highly automatic and organic solvent-free sample preparation method, namely surfactant-assisted pressurized liquid extraction (PLE), was developed for the extraction of flavonoids in Costus speciosus flowers before MEKC analysis. The various experimental parameters such as the type and concentration of surfactant, and extraction time were evaluated systematically. Under the optimized conditions, the extraction efficiencies of surfactant-assisted PLE methods were comparable with Soxhlet extraction using organic solvent. The combination of surfactant-assisted PLE and MEKC was shown to be a green, rapid and effective approach for extraction and analysis of flavonoids in C. speciosus flowers.     

Spectrophotometric determination of trace amounts of uranium(VI) in water samples after mixed micelle-mediated extraction

A cloud point extraction process using mixed micelle of the cationic surfactant CTAB and non-ionic surfactant TritonX-114 to extract uranium(VI) from aqueous solutions was investigated. The method is based on the color reaction of uranium with pyrocatechol violet in the presence of potassium iodide in hexamethylenetetramine buffer media and mixed micelle-mediated extraction of complex. The optimal extraction and reaction conditions (e.g. surfactant concentration, reagent concentration, effect of time) were studied and the analytical characteristics of the method (e.g. limit of detection, linear range, preconcentration, and improvement factors) were obtained. Linearity was obeyed in the range of 0.20-10.00 ng mL⁻¹ of uranium(VI) ion and the detection limit of the method is 0.06 ng mL⁻¹. The interference effect of some anions and cations was also tested. The method was applied to the determination of uranium(VI) in tap water, waste-water and well water samples.     

Development of a solid-phase microextraction method with micellar desorption for the determination of chlorophenols in water samples. Comparison with conventional solid-phase microextraction method

A novel analytical method is presented for the determination of chlorophenols in water. This method involves pre-concentration by solid-phase microextraction (SPME) and an external desorption using a micellar medium as desorbing agent. Final analysis of the selected chlorophenols compounds was carried out by high-performance liquid chromatography (HPLC) with diode array detection (DAD). Optimum conditions for desorption, using the non-ionic surfactant polyoxyethylene 10 lauryl ether (POLE), such as surfactant concentration and time were studied. A satisfactory reproducibility for the extraction of target compounds, between 6 and 15%, was obtained, and detection limits were in the range of 1.1-5.9ngmL(-1). The developed method is evaluated and compared with the conventional one using organic solvent as a desorbing agent. The method was successfully applied to the determination of chlorophenols in water samples from different origin. This study has demonstrated that solid-phase microextraction with micellar desorption (SPME-MD) can be used as an alternative to conventional SPME method for the extraction of chlorophenols in water samples.     

Determination of gastrodin and vanillyl alcohol in Gastrodia elata Blume by pressurized liquid extraction at room temperature

Pressurized liquid extraction (PLE) at room temperature with a laboratory-assembled system was applied for the extraction of gastrodin (GA) and vanillyl alcohol (VA) in Gastrodia elata Blume. The proposed system setup for this current work was simpler as no heating and backpressure regulator was required. Extraction with PLE was carried out dynamically at a flow rate of 1.5 mL/min, at room temperature, under an applied pressure of 10-20 bars with an extraction time of 40-50 min. The extraction efficiencies of the proposed method using 20% aqueous ethanol were compared with heating under reflux using organic solvents such as methanol and ethanol/water (20:80) for different batches of medicinal plant materials. For the determination of GA and VA in G. elata Blume, the extraction efficiencies of PLE at room temperature were observed to be comparable with heating under reflux. The method precision was found to vary from 1.6 to 8.6% (RSD, n = 6) on different days. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC and HPLC/MS/MS. Our work demonstrated the possibility of implementation of PLE at room temperature and the advantages of minimizing the use of organic solvents in the extraction process.     

Micelle-mediated extraction and preconcentration of ginsenosides from Chinese herbal medicine

The feasibility of employing micelle-mediated extraction as an alternative and effective method for the solubilization, purification and/or preconcentration of active ingredients from herbal products is demonstrated for the first time using the root of American ginseng as a model. When compared to methanol and water, an aqueous surfactant solution containing 10% Triton X-100 yielded faster kinetics and higher recovery for the extraction of various ginsenosides. An experimental design approach (uniform design) was demonstrated as a novel and useful method for the optimization of experimental factors involved in the micelle-mediated extraction process. For the preconcentration of ginsenosides prior to chromatographic determination, a salting-out agent (sodium sulfate) was employed to make the efficient cloud point extraction of both hydrophobic and hydrophilic ginsenosides into the surfactant-rich phase possible, as well as to increase the preconcentration factor by reducing the volume of the surfactant-rich phase.     

Pressurized liquid extraction versus other extraction techniques in micropreparative isolation of pharmacologically active isoflavones from Trifolium L. species

As a new sample preparation technique, pressurized liquid extraction (PLE), in combination with reversed-phase liquid chromatography (RP-LC) and photodiode-array (PDA) detection were used for the isolation and determination of phytoestrogenic isoflavones in hydrolyzed extracts obtained from aerial parts of five Trifolium L. (clover) species. To optimize the effectiveness of PLE procedure, variable extraction parameters: methanol and acetone (or their 75% aqueous solutions), as extraction solvents, temperatures (75, 100 and 125 °C) and the changeable number of static extraction cycles were tested. Additionally, two other micropreparative techniques: ultrasound-assisted extraction (UAE), and conventional solvent extraction (CSE), under optimized conditions, were also used and compared. Optimum extraction efficiency, expressed in the highest yield of biochanin A, formononetin, daidzein and genistein from plant material, with PLE, using methanol-water (75:25, v/v) as an extraction solvent, an oven temperature of 125 °C and three 5-min static extraction cycles, was obtained.     

Microwave-assisted micellar extraction coupled with solid-phase extraction for preconcentration of pharmaceuticals in molluscs prior to determination by HPLC

A simple and specific analytical method was developed and tested for the determination of pharmaceuticals in mollusc samples. A combination of microwave-assisted micellar extraction (MAME) and solid-phase extraction (SPE) using a non-ionic surfactant, polyoxyethylene 10 lauryl ether, was examined to extract and determine simultaneously a group of pharmaceuticals such as carbamazepine, clorfibric acid, ketoprofen, naproxen, bezafibrate and ibuprofen by liquid chromatography using UV-diode array detector. The MAME extraction performance was evaluated by studying various parameters such as the volume and concentration of surfactant and microwave conditions. Finally, an OASIS HLB cartridge was used as an optimum SPE sorbent to clean up the extracts and preconcentrate the selected analytes. The proposed method showed satisfactory linearity and reproducibility (between 3 and 15%), as well as detection limits ranging from 30 to 220 ng/g. Finally, the method was successfully applied to the determination of the target pharmaceuticals in various kinds of mollusc samples. This study has demonstrated that microwave-assisted micellar extraction with solid-phase extraction may be used as a viable alternative to conventional methods for the extraction of pharmaceuticals in this type of matrices.     

Cloud-Point Extraction Combined with LC–MS for Analysis of Memantine in Rat Plasma

The feasibility of using cloud-point extraction as a simple and effective means of recovery of memantine from rat plasma before LC–MS analysis has been demonstrated. A non-ionic surfactant Triton X-114 was used for extraction of the memantine. On increasing the temperature to the cloud point, phase separation occurred, resulting in an aqueous phase, and a surfactant-rich phase containing most of the analytes. The extraction conditions, for example amount of surfactant, temperature, NaOH concentration, and time of incubation, were optimized. Chromatographic separation was accomplished on a C₁₈ analytical column with 56:44 (v/v) methanol–0.2% aqueous formic acid as isocratic mobile phase at a flow rate of 0.8 mL min^?1. Under the optimum experimental conditions recovery was satisfactory (91–101%) without interference from the surfactant. The method was shown to be reproducible and reliable with intraday precision below 6.6%, interday precision below 14.3%, and linear range from 1 to 400 ng mL^?1. The method was successfully applied to a pharmacokinetic study of memantine in rats after oral and intravenous administration.     

Thorium determination in aqueous solutions after separation by ion-exchange and liquid extraction

The concentration of thorium in aqueous samples has been determined by means of alpha-spectroscopy and UV?CVis photometry after chemical separation and pre-concentration of the actinide by cation exchange and liquid-liquid extraction using Chelex-100 resin and 30%TBP in dodecan, respectively. Method calibration was performed using thorium standard solutions and resulted in a high chemical recovery for cation exchange and liquid extraction. Regarding, the effect of physicochemical parameters (e.g., pH, salinity, competitive cations, and colloidal species) on the separation recovery of thorium from aqueous solutions by cation exchange has also been investigated. The investigation was performed to evaluate the applicability of cation exchange and liquid extraction as separation and pre-concentration methods prior to the quantitative analysis of thorium in water samples, and has shown that the method could be successfully applied to waters with relatively low-salinity and metal ion contamination.     

Cloud-point formation based on mixed micelles for the extraction, preconcentration and spectrophotometric determination of trace amounts of beryllium in water samples.

A cloud-point extraction process using a mixed micelle of the cationic surfactant cetyl pyridinium chloride (CPC) and non-ionic surfactant Triton X-114 to extract beryllium from aqueous solutions was investigated. The method is based on the color reaction of beryllium with Chrome Azurol S (CAS) in acetate buffer and the mixed micelle-mediated extraction of the complex. This complex was concentrated in a surfactant-rich phase after separation. The optimal extraction and reaction conditions (e.g. pH, reagent and surfactant concentrations, temperature, incubation and centrifuge times) were evaluated and optimized. Under the optimized conditions, the analytical characteristics of the method (e.g. limit of detection, linear range and preconcentration factor) were obtained. Linearity was obeyed in the range of 0.30 - 18 ng mL(-1) of beryllium and the detection limit of the method was 0.05 ng mL(-1). The interference effect of some cations and anions was also studied. The proposed method was successfully applied to the determination of beryllium in real water samples.     

Micellar enhanced ultrafiltration of cadmium

The preconcentration of cadmium from aqueous colloid solution containing 8-hydroxyquinoline as extractant, laurylsulphate natrium as surfactant,n-butanol as co-surfactant was performed using micellar ultrafiltration technique. Filters with different pore size and materials were used to achieve a separation from liquid solutions. The cadmium recoveries depending on different conditions (pH, concentration of surfactant) were determined and the results are explained in the terms of colloidal parameters in the compare with the classical solvent extraction.     

Surface activity and redox behavior of a non-ionic surfactant containing a phenothiazine group

A novel non-ionic surfactant, -(phenothiazinylhexyl)-ω-hydroxy-oligo(ethylene oxide) (PCPEG) containing phenothiazine as an electro-active group has been synthesized. Fundamental interfacial behavior of the surfactant at the air/water interface has been investigated by means of surface tensiometry to provide an insight into the relationship between the structure of the hydrophobic moiety and the surfactant properties. A comparison of diffusivity of PCPEG in the aqueous phase with that in the acetonitrile solution at high PCPEG concentrations shows that micellization has a pronounced effect on the redox behavior of PCPEG. The electrochemical responses for PCPEG aqueous solutions at the interface of a glassy carbon electrode are fairly dependent on the concentration of PCPEG. Above CMC, PCPEG molecules self-associate to form micellar aggregates and the formation and disruption of micelles can be reversibly controlled by change in the redox state of the phenothiazine group. The cyclic voltammetric responses for PCPEG aqueous solutions have been correlated with the dissolved states to explain the distinctive feature of the surfactant.