A series of high‐performance polycarbonates have been prepared with glass‐transition temperatures and decomposition temperatures that are tunable by varying the repeat‐unit chemical structure. Patterning of the polymers with extreme UV lithography has been achieved by taking advantage of direct photoinduced chain scission of the polymer chains, which results in a molecular‐weight based solubility switch. After selective development of the irradiated regions of the polymers, feature sizes as small as 28.6 nm have been printed and the importance of resist‐developer interactions for maximizing image quality has been demonstrated.
Sixteen parallel polymerization reactions of 2‐ethyl‐2‐oxazoline have been performed at different temperatures in an automated synthesizer that allowed individual heating of each reactor. During the reactions samples were taken automatically, which were characterized by means of both online GPC and offline GC, in order to optimize the reaction temperature and to determine the activation energy of the polymerization.
A dextran‐based dual‐sensitive polymer is employed to endow gold nanoparticles with stability and pH‐ and temperature‐sensitivity. The dual‐sensitive polymer is prepared by RAFT polymerization of N‐isopropylacrylamide from trithiocarbonate groups linked to dextran and succinoylation of dextran after polymerization. The functionalized nanoparticles show excellent stability under various conditions and can be stored in powder‐form. UV and DLS measurements confirm that the temperature‐induced optical changes and aggregation behaviors of the particles are strongly dependent on pH.
The synthesis of poly(N‐vinylcarbazole)‐based block copolymers functionalized with rhenium diimine complexes or pendant terpyridine ligands is reported. The copolymers are synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization, and they exhibit interesting morphological properties as a result of the phase separation between different blocks. The rhenium complex polymer block may function as a photosensitizer, while the terpyridine‐containing polymer block can be used as the template for nanofabrication by selective deposition of zinc complexes.
The effects of temperature and solvent on the β‐phase formation and energy transfer in an Ir(III) complex‐containing polyfluorene were investigated. Efficient energy transfer from polyfluorenes host to Ir complexes guest can be realized at low temperature. The formation of β‐phase was observed both in THF solution at low temperature and as suspended nano‐particles at room temperature. In addition, phosphorescent polymer nanoparticles were prepared successfully and exhibited efficient phosphorescent emission.
Structure formation during high‐temperature reactive blending of randomly functionalized poly‐disperse backbone polymers (such as polyethylene) with end‐functionalized graft polymers (such as polyamide 6) forming co‐continuous nanostructured microphases was investigated by means of MC simulations using the bond fluctuation algorithm. We compared reacted and non‐reacted systems under the same conditions. For the non‐reacted system at low temperatures, phase separation was observed. In the system with grafting reactions, macroscopic phase separation was inhibited even if the consumption of reactive sites was only 50%. The calculated structure factor indicates a distinct difference between the two simulation states in accordance with the 3D visualization of the system and the box‐counting method.
Summary: Copolymers of poly(ethylene oxide) (PEO) and 5,5′‐azodisalicylic acid (Olsalazine, OLZ) were synthesized and evaluated by hydrolysis and in‐vitro biodegradation with azoreductase. It was found that changing the molecular weight of the PEO blocks affected the loading ratio of OLZ, and resulted in significant differences in the hydration and degradability of the copolymers. These novel azo‐containing copolymers can be used in colon‐specific drug delivery.
Release of 5‐ASA from OLZ and PEO‐OLZ copolymers incubated with rat cecum content in the presence of benzyl viologen and α‐D ‐glucose. 相似文献
4‐Vinylbenzoyl azide was synthesized from p‐vinylbenzoic acid and polymerized by free radical polymerization. The obtained polymer contained acyl azide groups which were thermally transformed to the corresponding isocyanato groups. Reactions on these polymers with ethanol, hydroxyethyl methacrylate and 1‐pyrenebutanol proceeded quantitatively. Time‐resolved FT‐IR studies of the reactions with ethanol were carried out by varying the concentration and temperature. The effect of the solvent polarity on the Curtius rearrangement was investigated.
A precise control of metallic‐nanoparticle assembly is highly critical for the realization of tangible, high‐performance devices or materials. Until recently, nanoparticle assembly using 1D templates had been limited to a narrow spectrum of nanoparticles as it was mostly dependent on the surface chemistry of the nanoparticles used. Inspired by the universal adhesive properties of mussels, we demonstrate a universal polymeric template for 1D assembly of various nanoparticles including, gold nanoparticles, iron oxide nanoparticles, and quantum dots. We find that the length of the 1D assembly is tunable using hyaluronic acid‐graft‐catechol templates with various contour lengths.
Summary: A new approach to the preparation of water soluble polymer in inverse miniemulsions is proposed. A redox initiation system consisting of ceric ions and carbohydrate‐based surfactant Span 60 as a reducing agent is successfully used for the polymerization of AAm. This initiation system provides chain nucleation and growth near interfacial boundaries. As a result, stable uniform latex with particle radius of about 50–70 nm is obtained. The prepared PAAm has a rather high of up to about 2 × 106 Da.
The bifunctional role of hydrazine as a potent nucleophile and antioxidant was investigated for the rapid aminolysis of RAFT polymers within minutes in air with effective suppression of the formation of disulfides. Using both dithioesters and trithiocarbonates as model compounds, we showed that hydrazine exhibited a significantly improved aminolysis rate when compared with a commonly used primary alkyl amine. On the basis of the exellent results with CTAs, we further studied the aminolysis of RAFT polymers prepared with either dithioesters or trithiocarbonates. In accord with the aminolysis results on CTAs, hydrazine aminolyzed RAFT polymers in an impressively short time and, more importantly, it significantly suppressed the formation of disulfides as comfirmed with GPC.
A novel self‐oscillating gel actuator with gradient structure, which generates a pendulum motion by fixing one edge of the gel without external stimuli was achieved. The gel was synthesized by copolymerizing the ruthenium catalyst for the Belousov‐Zhabotinsky reaction with N‐isopropylacrylamide and 2‐acrylamido‐2‐methylpropane sulfonic acid. Furthermore, we clarified that the period and amplitude for the self‐oscillating behavior of the gel actuator are controllable by changing the composition, temperature, and size of the gel. The maximum amplitude of the novel gel actuator is about a 100 times larger than that of the conventional self‐oscillating gel system.
Summary: We analyzed quantitatively the effects of temperature on the morphologic evolution of the desorption process in hot water measured ex situ by atomic force microscopy. The morphology of the hole that forms with immersion of the polyelectrolyte film in hot water has characteristics similar to those from polymer dewetting processes near the glass transition temperature. The hole diameter immediately reaches a maximum in the desorption process while the number of holes increases linearly with time.
AFM images of the morphology of PEM film after immersion in hot water 60 min. 相似文献
PS grafted silica nanoparticles have been prepared by a tandem process that simultaneously employs RAFT polymerization and click chemistry. In a single pot procedure, azide‐modified silica, an alkyne functionalized RAFT agent and styrene are combined to produce the desired product. As deduced by thermal gravimetric and elemental analysis, the grafting density of PS on the silica in the tandem process is intermediate between analogous “grafting to” and “grafting from” techniques for preparing PS brushes on silica. Relative rates of RAFT polymerization and click reaction can be altered to control grafting density.
Copolymerization of aniline with octa(aminophenyl) silsesquioxane (OAPS) was performed, which resulted in polyaniline‐tethered, polyhedral oligomeric silsesquioxane (POSS‐PANI), with star‐like molecular geometry. The spectro‐electrochemical studies show that the electrochromic contrast of POSS‐PANI is much higher than that of polyaniline (PANI). The great improvement can be attributed to the more accessible doping sites and the facile ion movement during the redox switching, brought by the loose packing of the PANI chains. This was evidenced by a drastic increase in ionic conductivity, a decrease in the electrical conductivity, and a decrease in the crystallinity and crystal size, with the increase of the OAPS concentration in the POSS‐PANI.
We report a new method for the synthesis of block copolymers with a pentasilane core by the polymerization of alkyl methacrylate monomers using the pentasilyl dianion as an initiator. The polymerization proceeded with living features and yielded the corresponding block copolymers with controlled molecular weights. The amphiphilic block copolymer was obtained by the polymer reaction, and it formed sphere‐like aggregates in MeOH/H2O solution.
A simple efficient post‐modification route to the fabrication of hybrid gold nanoparticles with poly(N‐isopropylacrylamide) (PNIPAm) based on click chemistry is described. The PNIPAm was prepared by reversible addition fragmentation chain transfer radical polymerization (RAFT). The PNIPAm was immobilized onto gold nanoparticles with grafting densities of 5.8 chains · nm−2 by a click reaction. The hybrid gold nanoparticles showed a temperature responsive phenomenon as the temperature changed between 20 and 45 °C.
Summary: The influence of architecture on ink‐jet printability of polymer solutions is investigated by comparing linear and 6‐arm star PMMA. At comparable concentration and molecular weight, filament formation is much more pronounced for linear PMMA than for star PMMA. Visual examination of filament stretching allows estimation of the involved elongation rates, which are at high voltages sufficiently large for coil‐stretch transition of the chains, suggesting its role in filament formation.
The results obtained in this study suggest a possible role of the coil‐stretch transition of the polymer chains in filament formation. 相似文献
A TEMPO bromide salt is used to functionalize a silica surface with nitroxyl moieties. The functionalization reaction takes place in 48 h under mild conditions. In a second step, grafts of styrene‐maleic anhydride copolymer are grown from the functionalized silica surface by heating it in the presence of the monomers. FT‐IR and TGA analysis show that the silica was first functionalized with nitroxide moieties, and then that grafts of styrene‐maleic anhydride grew from the functionalized silica surface. A reaction mechanism is proposed in order to explain the findings. The results suggest that the oxoaminium salts are good candidates for the functionalization and grafting of surfaces that contain hydroxy groups and for the generation of hybrid materials with improved properties.
PS‐b‐PAA spherical micelles with a liquid core and a PAA shell are prepared with the assistance of 1,2‐dichloroethane. During the process of adding a mixture of PNIPAM‐b‐P4VP and PEG‐b‐P4VP, multi‐layered micelles with a mixed corona that consists of both PNIPAM and PEG chains are constructed through the electrostatic interaction and hydrogen bonding between the PAA block and the P4VP block. When heating above the LCST, the PNIPAM chains collapse onto the PAA/P4VP complex layer while the PEG chains still stretch into the solution through the collapsed PNIPAM layer, which leads to the formation of hydrophilic channels around the PEG chains. The ibuprofen encapsulated in the hollow space can diffuse through the channels and its release rate can be controlled by changing the ratio of PEG chains to PNIPAM chains in the corona.
