碳纳米管修饰电极对对苯二酚和邻苯二酚的电催化研究

用循环伏安法(CV)和交流阻抗技术(EIS),研究了对苯二酚(HQ)和邻苯二酚(CC)在多壁碳纳米管(MWCNT)修饰电极上的电化学行为。分析和比较了修饰电极对这两种酚的催化反应。修饰电极对两种多酚类化合物都有强烈的电催化作用,电极过程受扩散控制。在pH 5.8的HAc-NaAc缓冲溶液中,HQ在修饰电极上的线性范围是10×10-4~1.0×10-2mol/L,检出限为1.0×10-5mol/L;在pH 4.4的HAc-NaAc缓冲溶液中,CC在修饰电极上的线性范围是4.0×10-5~2.0×10-3mol/L,检出限为8.0×10-6mol/L。该修饰电极可对HQ和CC同时进行测定。     

多壁碳纳米管修饰电极对核黄素的电催化研究

碳纳米管具有导电性和完整的表面结构，因而它可用作一种良好的电极材料。核黄素（维生素B2，RF）是黄素单核苷酸（FMN）和黄素腺嘌呤二核苷酸（FAD）的组成部分。而FMN和FAD是生命体中重要的辅酶，也是多种重要脱氢酶的辅酶，在线粒体呼吸链中起着传递电子和质子的作用。FMN和FAD分子中传递电子的功能部分与核黄素相同，均为异吡咯嗪环。本文用电化学方法研究了核黄素的电化学性质。     

纳米金/丝素复合膜修饰电极制备及对对苯二酚的电催化作用

将丝素还原HAuCl4制备的纳米金/丝素溶胶修饰在金电极表面制备了纳米金/丝素复合膜修饰电极,用于对苯二酚的催化氧化。实验表明,该修饰电极具有很好的电化学性能,在pH3.55磷酸盐缓冲溶液中以该修饰电极对对苯二酚进行检测,对苯二酚在4.0×10-6~1.0×10-4mol/L浓度范围内,其氧化峰电流与浓度呈良好的线性关系,其线性回归方程为i(μA)=0.2614 5.3539c,r=0.9995;检出限为2.0×10-7mol/L,灵敏度良好,用于实际样品分析,结果令人满意。     

对苯二酚在多壁碳纳米管修饰电极上的电化学行为研究

采用循环伏安法、微分脉冲伏安法、计时安培法研究了对苯二酚在多壁碳纳米管修饰电极上的电化学行为,计算得到了碳纳米管修饰电极有效面积Aeff=23.9mm2以及对苯二酚电化学氧化过程的一些重要参数:传递系数α=0.630;控制步骤的反应电子数nα=1.03;反应速率常数k′=3.74×10-2cm/s;扩散系数D=2.85×10-6cm2/s。实验结果显示,本实验条件下对苯二酚在碳纳米管修饰电极上的氧化反应受扩散过程控制,为前行化学反应(CE),对苯二酚在失去电子之前先经历了一个脱氢的过程。微分脉冲伏安结果显示,催化氧化峰电流与对苯二酚浓度在1×10-4~6×10-6mol/L范围内呈良好的线性关系,检出限达4.0×10-7mol/L(S/N=3)。     

多壁碳纳米管-Nafion修饰电极测定左旋氧氟沙星

本文报道了用多壁碳纳米管-Nafion修饰玻碳电极测定痕量左旋氧氟沙星的方法。详细研究了左旋氧氟沙星在修饰电极上的电化学行为。实验表明,该电极对左旋氧氟沙星具有良好的电催化作用。在伏安图中,+1.73V处出现一灵敏氧化峰,利用该峰可进行左旋氧氟沙星的测定。在优化条件下,氧化峰电流与左旋氧氟沙星的浓度在0.001~0.5 mg.mL-1范围内成良好的线性关系。信噪比等于3时,检出限为1×10-4mg.mL-1。用于实际样品中左旋氧氟沙星的测定,加标回收率为97.32~102.82。     

多壁碳纳米管-Nafion膜修饰铂电极的电化学性质

使用多壁碳纳米管(MWCNTs)和Nafion溶液制备了多壁碳纳米管-Nafion膜修饰的铂电极。运用扫描电子显微镜(SEM)对多壁碳纳米管、Nafion膜、多壁碳纳米管-DMF膜和多壁碳纳米管-Nafion膜进行了形貌表征。通过电化学系统研究了铁氰化钾在多壁碳纳米管-Nafion膜修饰电极、多壁碳纳米管-DMF修饰电极以及未修饰铂电极的表面电化学行为。结果显示,多壁碳纳米管-Nafion膜修饰的电极对铁氰化钾有显著的电化学增强作用,于0.185 V处形成了一个尖锐的还原特征峰,比未修饰的铂电极还原峰增强近8.7倍;在0.231 V处形成了一个较强的氧化特征峰,比未修饰的铂电极氧化峰增强近2.7倍。由于多壁碳纳米管的比表面积大,利用其与Nafion修饰的电极能增强电子传输效率,使测定的峰电流增大,从而提高灵敏度,有助于检测低浓度物质。进一步研究发现,铁氰化钾在未修饰的铂电极表面反应为可逆反应,而在MWCNTsNafion膜修饰后的电极表面反应为不可逆反应。     

抗坏血酸在多壁碳纳米管修饰玻碳电极上的催化氧化

多壁碳纳米管;抗坏血酸;修饰电极;电催化;伏安法     

金纳米粒子/碳纳米管复合修饰玻碳电极对对苯二酚氧化还原反应的电催化性能

以对苯二酚为目标化合物比较研究了金纳米粒子、碳纳米管、金纳米粒子/碳纳米管3种纳米粒子修饰电极的电催化性能,结果发现:3种纳米粒子修饰电极均对对苯二酚的电化学信号具有增强作用。电化学阻抗谱和修饰层数试验表明:金纳米粒子的增强效果来自于金纳米粒子的电催化作用,碳纳米管的增强作用来自于电催化作用与大的电极表面积,金纳米粒子/碳纳米管复合修饰电极综合利用了两种纳米粒子的特性,表现出了更为优良的电催化行为。对苯二酚在修饰电极上的电化学过程均为扩散控制过程。     

多壁碳纳米管修饰电极的制备及其应用

研究了多壁碳纳米管修饰电极的制备方法及其对水飞蓟宾的电催化作用。利用循环伏安法和线性扫描法在乙醇-磷酸盐缓冲溶液中(pH=5.56)研究了水飞蓟宾的电化学特性。水飞蓟宾在多壁碳纳米管修饰电极上,于0.64 V处有一不可逆氧化峰,用线性扫描法建立了其定量方法,线性范围为2.0×10-6~1.0×10-4mol/L,检出限为4.4×10-7mol/L。利用该电极建立了水飞蓟宾的定性、定量方法,该法简便、快速、灵敏。     

多壁碳纳米管修饰电极测定非那西汀

本文研究了非那西汀在羧基化多壁碳纳米管修饰电极上的电化学行为。在0.1 mol·L-1HAc-NaAc(pH5.3)溶液中,非那西汀在羧基化多壁碳纳米管修饰电极上有一对可逆的氧化还原峰和一个氧化峰。对各种实验条件进行了优化,测得峰电流I p与非那西汀浓度在4.0×10-6~1.0×10-4mol·L-1范围内呈良好的线性关系,检测限为1.0×10-6mol·L-1。此修饰电极具有较好的重现性和稳定性。利用优化后的条件对尼美舒利药片进行了测定,测量值与标示值符合,回收率在96.5%~104.2%。     

蒿甲醚在单壁碳纳米管修饰电极上的电催化还原

研制了单壁碳纳米管(SWCNTs)修饰玻碳电极。用交流阻抗谱法(EIS)和扫描电镜(SEM)研究了电极膜性能,应用循环伏安法(CV)、计时库仑法(CC)、计时电流法(CA)研究了蒿甲醚在修饰电极上的电化学行为。结果表明,SWCNTs修饰电极对蒿甲醚的还原有良好的电催化活性,其还原反应为双电子过程,电极反应的扩散系数及速率常数分别为6·67×10-4cm2·s-1及8·54×10-2mol·L-1·s-1。在优化实验条件下,还原峰的峰电位位于-0·85V,其峰电流与蒿甲醚浓度在6·71×10-7~2·45×10-4mol·L-1范围内呈良好线性,检出限达4·02×10-7mol·L-1,相对标准偏差(n=10)为4·2%,可用于蒿甲醚样品的含量测定。     

Electrocatalytic Oxidation and Determination of Nitrite at Multi‐walled Carbon Nanotubes Modified Carbon Ceramic Electrode

In the present work, the electrochemical oxidation of nitrite on carbon ceramic electrode (CCE) modified with multi‐walled carbon nanotubes (MWCNTs) was investigated. The modified electrode exhibited catalytic activity toward the electrooxidation of nitrite. Experimental parameters such as solution pH, scan rate, concentration of nitrite and nanotubes amount were studied. It was shown nitrite can be determined by differential pulse voltammetry (DPV) and hydrodynamic amperometry (HA) using the modified electrode. Under the optimized conditions the calibration plots are linear in the concentration ranges of 15‐220 and 50‐3000 μM with limit of detections of 4.74 and 35.8 μM for DPV and HA, respectively. The modified electrode was successfully applied for analysis of nitrite in spinach sample. The results were favorbly compared to those obtained by UV‐Visible spectrophotometric method. The results of the analysis suggest that the proposed method has promise for the routine determination of nitrite in the examined products.     

碳纳米管修饰电极上沙丁胺醇电催化氧化研究

将多壁碳纳米管(MWNT)分散在疏水性表面活性剂双十六烷基磷酸(DHP)溶液中形成稳定、均相的分散液,然后制备多壁碳纳米管-DHP复合膜修饰玻碳电极(MWNT-DHP/GCE).应用方波伏安法研究了沙丁胺醇在修饰电极上的电化学行为,结果表明,碳纳米管复合膜修饰电极对沙丁胺醇的氧化有良好的电催化活性,其氧化反应为一电子一质子过程,氧化电位比裸玻碳电极负移40 mV,峰电流增加了4.5倍.在最佳测试条件下,氧化峰电流与沙丁胺醇浓度在8.3×10-7~3.3×10-6mol/L范围内呈良好线性关系,开路富集2min,检出限达1.8×10-7mol/L.该修饰电极具有良好的重现性、稳定性.     

方波伏安法测定新型修饰多壁碳纳米管糊电极对肼的电催化氧化(英文)

The application of p-aminophenol as a suitable mediator, as a sensitive and selective voltammetric sensor for the determination of hydrazine using square wave voltammetric method were described. The modified multiwall carbon nanotubes paste electrode exhibited a good electrocatalytic activity for the oxidation of hydrazine at pH = 7.0. The catalytic oxidation peak currents showed a linear dependence of the peaks current to the hydrazine concentrations in the range of 0.5–175 μmol/L with a correlation coefficient of 0.9975. The detection limit (S/N = 3) was estimated to be 0.3 μmol/L of hydrazine. The relative standard deviations for 0.7 and 5.0 μmol/L hydrazine were 1.7 and 1.1%, respectively. The modified electrode showed good sensitivity and selectivity. The diffusion coefficient (D = 9.5 × 10–4 cm2/s) and the kinetic parameters such as the electron transfer coefficient (α = 0.7) of hydrazine at the surface of the modified electrode were determined using electrochemical approaches. The electrode was successfully applied for the determination of hydrazine in real samples with satisfactory results.     

对乙酰氨基酚在多壁碳纳米管修饰电极上的电化学行为

制备了多壁碳纳米管修饰玻碳电极,研究了对乙酰氨基酚在多壁碳纳米管修饰电极上的循环伏安行为,并建立了测定对乙酰氨基酚含量的电化学分析方法。在pH为6.89的磷酸盐缓冲液中,多壁碳纳米管修饰电极对对乙酰氨基酚有明显的电催化作用,其氧化峰电流与对乙酰氨基酚浓度在1.0×10-6～1.0×10-4mol·L-1范围内呈良好的线性关系,检测限为2.0×10-7mol·L-1。     

盐酸伪麻黄碱在多壁碳纳米管修饰玻碳电极上的电催化氧化及其电化学动力学性质

盐酸伪麻黄碱;碳纳米管修饰电极;电催化氧化;电化学动力学     

米吐尔在多壁碳纳米管修饰电极上的电化学行为及其应用

制备了多壁碳纳米管修饰玻碳电极(MWCNT/GCE),研究了该电极对米吐尔的电催化作用及测定溶液中米吐尔的分析条件。实验表明:在常见的支持电解质中,米吐尔在MWCNT/GCE上比裸玻碳电极(GCE)上氧化还原峰电位差要小,而峰电流显著增加,因此该电极对米吐尔有电催化作用;在pH=1.0的HCl-KCl支持电解质中,米吐尔的电流响应最佳;扫速增加,峰电流增加,但峰电位受溶液电阻的影响而发生位移,峰形变差,最佳扫描速度为0.12V/s;一些常见物质对测定无干扰,米吐尔浓度与峰电流的关系为:Ipc=0.1126C 1.393×10-4(r=0.9982);共存的对苯二酚(HQ)干扰测定,但可通过二次微分CV曲线方法消除干扰,在8.0×10-2~1.0×10-5mol/L范围内,其浓度与二次微分还原峰面积线性关系为:Apc=8.562×10-4C 1.801×10-6(r=0.9986);检出限达5.0×10-6mol/L。     

Electrocatalysis of Tryptophan at Multi-Walled Carbon Nanotube Modified Electrode

Acid-treated multi-walled carbon nanotubes (MWNTs) were immobilized on the surface of a glassy carbon electrode to form an MWNT-modified electrode. The electrocatalytic response of the modified electrode towards tryptophan (Trp) was investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results demonstrated that the modified electrode exhibited a high degree of catalytic activity towards the oxidation of Trp. An oxidation peak was obtained in Trp solution at the MWNT-modified electrode. Compared with a bare electrode, the peak current had obviously increased, and the peak potential had shifted in a negative direction. However, under the same conditions, no response was observed for other amino acids. The oxidation peak currents were proportional linearly to the concentration of Trp, a property which could be utilized to detect Trp. The determination conditions, such as the concentration, the composition and the pH values of the supporting electrolyte, accumulation time, as well as scan rate etc. were optimized. Under the chosen conditions, the DPV peak current is linear to the concentration of Trp in the range of 2.5×10^–7 to 1.0×10^–4molL^–1, and the detection limit is 2.7×10^–8molL^–1. Moreover, the detection is free of interference from other amino acids. The modified electrode has been successfully applied to determine the concentration of Trp in composite amino acid injections, and it displays excellent repeatability and higher sensitivity.     

Modified Glassy Carbon Electrode with Multiwall Carbon Nanotubes as a Voltammetric Sensor for Determination of Leucine in Biological and Pharmaceutical Samples

Abstract

A simple and highly sensitive method is described for voltammetric determination of leucine in blood and urine samples; namely, a glassy carbon electrode with an effective method is modified with multiwall carbon nanotubes (MWNTs). The cyclic voltammetric results indicated that MWNTs remarkably enhanced electrocatalytic activity toward the oxidation of leucine. Under the optimum condition the calibration curve was linear in the concentration range 9.0 × 10^?6 ? 1.5 × 10^?3 mol L^?1, with the detection limit of 3.0 × 10^?6 mol L^?1 and a relative standard deviation (RSD%) lower than 3.0% (n = 5). Also, some kinetic parameters were determined and a multistep mechanism for oxidation of leucine was proposed.