非贵金属Fe催化剂体系催化硝基苯还原羰化反应

SiO2负载天然生物高分子材料壳聚糖(简写为CS),再络合FeCl3,所得催化剂SiO2-CS-FeCl3,利用高分子载体对催化活性物种的保护和Fe-Ni双金属协同效应,在催化硝基苯及其衍生物的还原羰化反应中表现出了较高的催化活性和选择性.     

硝基苯的电还原特性研究

采用准稳态极化、循环伏安、线性扫描和恒电位阶跃等测试方法,对Ｈ２ＳＯ４溶液中硝基苯的电还原特性进行研究,评价了硝基苯在Ｃｕ、Ｃｕ－Ｈｇ和Ｃｕ－Ｎｉ电极的电还原反应活性,研究了硝基苯电还原为ＰＡＰ的中间步骤,并对反应机理进行了探讨。结果表明,硝基苯在酸性介质中的电还原反应存在中间步骤,并伴有反应物吸附现象,硝基苯电还原反应受硝基苯及其还原产物在溶液中的液相传质步骤控制．     

Cu/C-Nafion复合电极上硝基苯的电化学还原

制备性电解的结果表明，硝基苯在Cu／C－Nafion膜复合电极上的还原产物只有苯胺，可能与电极／Nafion界面的弱酸性环境和其还原中间产物本羟胺在界面的扩散较仅有关．生成苯胺的电流效率随电流密度的增大而减小，随反应液中硝基苯浓度的增大出现一个最大值．这可能是硝基苯的电化学还原过程受某种粒子的扩散控制、峰电流取决于硝基苯在Nafion膜中的溶解度所致．     

硅胶担载离子液体催化剂的制备及其在由胺制二取代脲反应中的应用

 采用溶胶-凝胶法制备了硅胶负载Rh(PPh3)3Cl-离子液体催化剂Rh-DMImBF4/SiO2-gel,并对其催化胺类化合物氧化羰化制二取代脲反应的活性进行了考察. 结果表明,该催化体系对胺类化合物氧化羰化制二取代脲反应具有较高的催化活性,产物分离简单,催化剂易回收且具有较好的重复使用性能. 以氧为氧化剂时,苯胺转化率可达95%,脲的选择性可达98%以上. 以硝基苯为氧化剂时,苯胺转化率为93%,硝基苯转化率为92%,脲的选择性为98%以上,转化频率均超过11000 mol/(mol·h). 此外,还制备了Co-DMImBF4/SiO2-gel,Pd-DMImBF4/SiO2-gel和Ru-DMImBF4/SiO2-gel等催化剂,并对其催化氧化羰化胺类化合物的性能进行了考察.     

钼催化剂上甲醇直接气相羰基化活性与吸附的关系

 制备了一系列非负载的钼催化剂，考察了催化剂上甲醇直接气相\r\n羰化活性与反应物及产物吸附的关系．结果发现，催化剂的制备方法对\r\n甲醇直接气相羰化活性的影响很明显，以纯二硫化钼试剂制备的催化剂\r\n，甲醇转化率与羰化产物乙酸甲酯的选择性最低；以三氧化钼气相还原\r\n硫化制备的催化剂，其羰化活性较低；以钼酸铵溶液经硫化铵溶液或硫\r\n化氢气体硫化制得的催化剂，其性能明显优于前两种，尤以钼酸铵经硫\r\n化铵溶液硫化制得的催化剂的性能最佳．催化剂的羰化活性明显依赖于\r\n催化剂的吸附性能，羰化活性高的催化剂不仅吸附CO的量大，而且对甲\r\n醇和乙酸甲酯的吸附量也明显较大．     

钯-离子液体/钛硅复合氧化物催化剂的合及在胺羰化中的应用

长期以来 ,工业上一直使用光气合成法生产异氰酸酯类化合物 ,极易造成环境污染和人员伤害 ,因此研究无光气且环境友好的新工艺已引起广泛关注 .就经济角度考虑 ,由硝基类化合物进行还原羰化[1～ 4 ] 或胺类化合物进行氧化羰化 [5～ 13] 制备异氰酸酯比较有利 ,但是存在金属配合物催化剂的还原失活等问题[14 ,15] .室温离子液体作为一种具有特殊催化性能和可调控溶解能力的新型溶剂和反应介质已用于有机反应中 [16 ] ,但将其作为反应介质的含氮化合物进行羰化研究尚未见报道 .本文将离子液体应用于以硅酸四乙酯 ( TEOS)和钛酸四丁酯 ( TBO…     

非光气含氮化合物催化羰化研究进展

本文对近几年来非光气含氮化合物羰化合成氨基甲酸酯及二取代脲的方法进行了概述,主要包括使用钯、钌、铑、硒、金等催化体系以一氧化碳为羰化剂进行的催化氧化羰化和催化还原羰化反应过程,以及使用碱催化体系以二氧化碳和碳酸二甲酯等为羰化剂的反应过程和机理.     

过渡金属盐促进的纳米氢化钠对硝基的还原反应

研究了在过渡金属盐促进下，纳米尺寸的活性氢化钠对硝基化合物的还原反应．结果表明，过渡金属盐的存在，使纳米氢化钠（ＮａＨ＊）的还原活性进一步增强，硝基苯的转化率在较短时间内就超过９０％．镍盐对生成苯胺的选择性最好（１００％），其次是锰盐．不同纳米碱金属氢化物对硝基苯还原的活性和生成苯胺的选择性顺序为ＮａＨ＊＞ＫＨ＊＞ＬｉＨ＊．几种硝基化合物的反应结果表明，ＮａＨ＊－镍盐是硝基还原生成芳胺有效的复合还原剂     

钯催化芳香硝基化合物与烯烃的选择性还原羰化酰胺化反应

与芳香胺相比,芳香硝基化合物具有廉价易得、官能团兼容性好等优点,作为氮源在下游含氮化学品合成中具有广泛的应用.目前烯烃羰化酰胺化反应绝大多数以胺类化合物为氮源,其中直链和支链酰胺产物的选择性主要是通过具有特定电子和位阻特性的配体调控实现.已报道的芳香硝基化合物的还原酰胺化反应研究中,需要外加还原剂或者利用金属羰基化合物Mo(CO)6释放的CO为羰基源和还原剂.本文发展了一种毋须外加还原剂的钯催化芳香硝基化合物与烯烃的还原羰化酰胺化反应新方法.研究发现,钯金属催化剂(特别是离子型)的抗衡阴离子是还原羰化酰胺化反应中化学选择性和羰化区域选择性的关键因素.抗衡阴离子为氯离子、硼酸为助剂时,最优钯前驱物K2PdCl4的产物主要为支链酰胺,此时不同的膦配体并不能调控其区域选择性,这与胺的烯烃酰胺化反应可以通过配体调控羰化的区域选择性表现出明显的不同.含氮中间体原位捕捉、硝基化合物还原下游可能中间体对照实验等研究表明,芳香硝基化合物在以一氧化碳为还原剂的催化还原体系下被完全脱氧还原为氮烯(Ar-N:),再经过烯酰胺中间体进一步烯键还原得到相应的支链酰胺;当离子型钯前驱物的抗衡阴离子配位性较弱时,最优钯前驱物为Pd(CH3CN)4(OTf)2时,以直链酰胺为主要产物,此时不同的膦配体可以调控酰胺化的区域选择性.同样的机理研究表明,在该催化剂体系下芳香硝基化合物首先被还原为芳基胺,然后再发生与现有报道类似的胺类化合物的烯烃羰化酰胺化反应.这两个催化反应体系都表现出了较好的底物适用性,并且可以高效地应用于除草剂(敌稗)的一步合成.本文为以硝基化合物为起始氮源,通过催化控制生成特定含氮中间体,从而可控合成不同的含氮化学品提供了一条新思路.     

钯－膦－酸体系催化叔丁醇羰化制备异戊酸酯

研究了Ｐｄ（ＯＡｃ）２－ＰＰｈ３－ｐ－Ｔｓ催化剂体系存在下，叔丁醇羰化生成异戊酸酯的反应．典型的反应条件是：温度１２０～１６０℃，压力３．０～７．０ＭＰａ，Ｐｄ浓度３．６ｍｍｏｌ／Ｌ，ｎＰｄ∶ｎＰＰｈ３∶ｎｐ－Ｔｓ＝１∶３０∶８０，时间１２～２４ｈ．在上述反应条件下，叔丁醇羰化生成异戊酸酯的产率为１１．０％～８３．６％，选择性为１３．１％～９５．０％．     

天然高分子负载双金属催化剂催化硝基苯还原羰化反应

天然生物高分子材料-壳聚糖(简写为CS)负载催化刑：Si02—CS—PdCl2，利用Pd-Ni双金属协同效应和高分子载体对催化活性物种的保护，在催化硝基苯的还原碳化反应中表现出了较高的催化活性和选择性．并且尝试了催化刑的重复使用．     

The palladium-phenanthroline catalyzed carbonylation of nitroarenes to diarylureas: Effect of chloride and diphenylphosphinic acid

The application of the palladium-phenanthroline catalytic system to the carbonylation of nitrobenzene in the presence of aniline to afford diphenylurea has been investigated. The reaction is best performed with equimolar amounts of the two reagents. Use of higher concentrations of either aniline or nitrobenzene or an increase in temperature in the range 120-170 °C leads to the formation of higher amounts of azo- and azoxybenzene. The latter were found to contain exclusively the aryl moiety deriving from nitrobenzene, with no inclusion of that derived from aniline. The addition of a small amount of diphenylphosphinic acid doubles the conversion and improves the selectivity in diphenylurea, but the effect is attenuated for larger amounts of acid. Small amounts of chloride, of the order of 10-30 mol% with respect to palladium, improve both rate and selectivity, but only inhibiting effects are detected when chloride is added to the reaction mixture for the carbonylation of 2,4-dinitrotoluene to dimethyl 2,4-toluenedicarbamate. The data obtained and that previously reported in the literature has been analyzed in the context of a unifying mechanism and an explanation for some apparent contradictions has been given.     

Homogeneous catalysis by ruthenium carbonyl clusters

The historical background of and the incentive for using ruthenium carbonyl clusters as homogeneous catalysts are outlined. Keeping in view the possible solutions the uncertainties arising from declusterification and metal colloid formation are discussed. All ruthenium cluster-catalysed reactions are broadly classified as reactions with or without carbon monoxide as one of the reactants and the basic differences between such reactions are highlighted. Some of the factors of special relevance to cluster-catalysed reaction systems are mentioned. The reactions involving carbon monoxide are then discussed. These include water-gas-shift reaction, carbon monoxide hydrogenation, hydroformylation, reductive carbonylation of nitrobenzene and other carbonylation reactions. Hydrogenation, transfer hydrogenation, isomerisation and a few other reactions are then discussed. For all these reactions, special emphasis is laid on well-characterised cluster complexes that have been proposed as catalytic intermediates. Finally an attempt has been made to identify the path that future research in cluster catalysis is likely to follow.     

硒催化硝基苯的还原羰基化生成苯氨基甲酸酯

详细考察了醇介质中硒催化的硝基苯还原羰基化生成苯氨基甲酸酯的反应,获得了一系列苯氨基甲酸酯产物。结果表明,硒粉催化活性高,反应产率和选择性良好,反应工艺简单。文中对反应提出了可能的机理。     

Effect of a proximal substituent on the triruthenium dodecacarbonyl-catalyzed reductive carbonylation of nitroarenes

Three nitroarenes were submitted to Ru₃(CO)₁₂-catalyzed reductive carbonylation in acetonitrile and in cis-cyclooctene. The main reaction products were the corresponding amines, ureas and six- or five-membered cyclization products. Optimization of the reaction varying the temperature, the CO pressure, the catalyst/substrate ratio and the reaction time and a statistical analysis of conversion and selectivity data allow to suggest a reaction mechanism in some reaction conditions.     

Palladium-catalyzed reductive carbonylation of nitrobenzene for producing phenyl isocyanate

Direct reductive carbonylation of nitrobenzene to phenyl isocyanate with carbon monoxide was performed using various types of palladium catalysts together with many types of N-donor ligands. The effect of reaction time, pressure, temperature, ligand amount, and molar ratio to establish the optimized conditions was also investigated. With this, we were able to achieve up to 100% conversion and 63.5% yield with PdCl₂ and alkylimidazole system (1:3) within 2 h at 220 °C and 1400 psi of CO in toluene.     

A Convenient Palladium‐Catalyzed Reductive Carbonylation of Aryl Iodides with Dual Role of Formic Acid

Palladium‐catalyzed reductive carbonylation of aryl halides represents a straightforward pathway for the synthesis of aromatic aldehydes. The known reductive carbonylation procedures either require CO gas or complexed compounds as CO sources. In this communication, we developed a palladium‐catalyzed reductive carbonylation of aryl iodides with formic acid as the formyl source. As a convenient, practical, and environmental friendly methodology, no additional silane or H₂ was required. A variety of aromatic aldehydes were isolated in moderate to excellent yields under mild reaction conditions. Notably, this is the first procedure on using formic acid as the formyl source.     

Activities of Co(II) Schiff base complexes in the redox carbonylation of aniline and nitrobenzene to methyl N-phenyl carbamate

The series of cobalt(II) complexes with different Schiff base ligands was synthesized and used as catalyst for the redox carbonylation of aniline and nitrobenzene. Effects of reaction temperature, CO pressure, promoter, and catalyst additions on the conversion of substrate were studied. When Co[(OH)₂saloph] — p-toluenesulfonic acid system was used as catalyst, the reaction was carried out at the next conditions: both Co[(OH)₂saloph] and p-toluenesulfonic acid—0.2 mmol, aniline—20 mmol, nitrobenzene—10 mmol, methanol—30 ml, Co—5 MPa, temperature 170°C, reaction time 7 h. The highest conversion of nitrobenzene and selectivity of methyl N-phenyl carbamate were 54.5 and 92.2%, respectively.     

Selective formation of unsymmetric ureas by selenium-catalyzed oxidative–reductive carbonylation with CO

A series of unsymmetric ureas containing substituted groups have been synthesized via selenium-catalyzed selective oxidative–reductive carbonylation of amines and nitro compounds with CO instead of phosgene in one-pot reaction. These catalytic reactions are important from both synthetic and industrial points of view, because not only the reactions can be proceeded with high selectivity of higher than 99% towards desired unsymmetric ureas, but also there exists a phase-transfer process of the selenium catalyst in the reaction, so that the after-treatment of the catalysts and products from the reaction systems can be easily separated by simple phase separation.