The Effect of Styrene-Butadiene-Styrene Modification on the Characteristics and Performance of Bitumen

In order to cover the effect of styrene-butadiene-styrene (SBS) modification on the characteristics of bitumen, two types of bitumen, one plain bitumen, and one polymer modified bitumen produced with the plain bitumen as base material were characterized in terms of chemical composition, microstructure, micromechanical properties, and thermoanalytical behavior. In order to determine the complex chemical composition of bitumen, elemental analysis, gel permeation chromatography, and the Iatroscan method were employed. Microstructure and micromechanical properties were determined using an environmental scanning electron microscope and the nanoindentation technique. Modulated differential scanning calorimetry was used to determine phase-change temperatures and endo/exotherms associated with molecular movement. The addition of SBS leads to different rheological behavior over the whole service temperature range. This is reflected in bitumen chemistry by differences in elemental composition and molecular weight distribution with much higher M _w values for the modified bitumen. Accordingly, the polymer leads to a shift in molecular fractions. Electron microscopy reveals two distinct phases building up the bitumen microstructure. The chosen mode of quantification leads to similar material parameters for both bitumens, which is explained by the use of the same base material. In contrast, nanoindentation delivers viscosities in the micro-range corresponding to large-scale rheological properties. Modulated differential scanning calorimetry indicates two glass transitions corresponding with two material phases also confirmed by other experiments. Due to modification, these glass transitions depart from each other and the amount of the two material phases changes, correlating with the shift in molecular fractions observed in Iatroscan analyses.     

Electrospinning fabrication of partially crystalline bisphenol A polycarbonate nanofibers: Effects on conformation, crystallinity, and mechanical properties

The application of an electrostatic and centrifugal field (1800 rpm) in a novel electrospinning process was shown to improve the degree of uniaxial alignment in polymer nanofibers and to enhance orientational order in polymer chains, producing bisphenol A polycarbonate (BPAPC) nanofibers with superior mechanical properties. High-speed videography showed that the additional centrifugal field effectively removed electrical bending instability and promoted molecular orientation during the electrospinning process. Infrared spectroscopic (IR) characterization revealed that the fraction of trans–trans conformers in BPAPC nanofibers reached 67% under optimal electrospinning conditions (25 kV and 1800 rpm at 25 °C). Modulated differential scanning calorimetry (MDSC) and wide-angle X-ray diffraction (WXRD) assays showed that a degree of crystallinity of 6.5% could be achieved. Moreover, two crystal phases at angles of 2θ = 17.3° and 21.9° were produced in BPAPC nanofibers. The elastic modulus of BPAPC nanofibers with a crystallinity of 6.5% was 7.11 and 5.13 GPa, as measured via atomic force microscopy (AFM) and nanoindenter (NI) experiments, respectively. These results demonstrated that the mechanical behavior of BPAPC nanofibers could be improved by conducting the proposed electrospinning technique. Moreover, BPAPC nanofibers produced through the proposed method could be potentially applied for the reinforcement of composites.     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

Study of the influence of isomerism on the curing properties of the epoxy system DGEBA (n=0)/1,2 DCH by DEA and MDSC

Summary Modulated differential scanning calorimetry (MDSC) and dielectric analysis (DEA) have been used to characterize the cure process of the system diglycidyl ether of bisphenol A (DGEBA(n=0)/1,2 diaminocyclohexane (1,2 DCH). The trans isomer and a mixture cis/trans(30-70% respectively) of 1,2 DCH were used to find their different behaviour. The study allowed to check the influence of the cisisomer on the thermoset curing process. Gelation times were obtained through the equation proposed by Johari and vitrification times from the point of inflection of the complex calorific capacity modulus.     

Structural and conformational investigations in SmA and different SmC phases of new hockey stick-shaped compounds

New meta -substituted homologous three-ring mesogens, the 4-(3-n-decyloxyphenyliminomethyl) phenyl 4-n-alkyloxybenzoates, have been synthesized, which are non-linear due only to the attachment of one of the alkyloxy groups in a meta -position. The mesophases were studied by optical microscopy, differential scanning calorimetry, NMR spectroscopy, X-ray diffraction, and electro-optical and dielectric measurements. Unusual phase behaviour was observed on varying the length of the terminal chain. The most interesting finding is the occurrence of two polymorphic tilted smectic phases designated as SmC₁ and SmC₂. The existence of these phases was revealed by calorimetric studies and also from the pronounced difference in optical textures. It was shown from NMR measurements that the molecular orientation changes from a synclinic to an anticlinic arrangement in the SmC₁ to SmC₂ phase transition. It has also been shown, using NMR, that the SmC₁ → SmC₂ phase transition in these compounds is accompanied by a conformational change in the molecular fragment containing the aromatic ring with the meta-substituted terminal alkyloxy chain. This conformational change is linked to a change in the shape of the molecules and leads to a different packing of the molecules within the layers of the SmC₂ phase. From dielectric measurements an increase by a factor of two was detected in the molecular mobility at the transition into the low temperature SmC₂ phase. This finding supports a change in the packing as result of conformational changes.     

Characterization of large molecular weight ester‐functionalized norbornene and hydroxylated norbornane carboxylic acid polymers prepared by ring‐opening metathesis polymerization

5‐Norbornene‐2‐ethyl ester (mixture of endo and exo) is polymerized via ring‐opening metathesis polymerization, yielding polymers with molecular weights ranging from 50,000 to 5,000,000 g/mol. The polymers are hydroxylated and saponified without alteration of the molecular weight. The polymers are analyzed by NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. Films are cast from the polymers at several molecular weights and their rheological properties are investigated. The results showed greater solid‐like character with increasing molecular weight for all polymers analyzed. Cell viability studies showed that the films possessed minimal cytotoxicity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of a novel terpolymer based on L‐lactide,glycolide, and trimethylene carbonate for specific medical applications

The bioresorbable new terpolymers of L ‐lactide, glycolide, and trimethylene carbonate were synthesized via ring‐opening polymerization reaction of the cyclic monomers using Stannous octoate as initiator. Glycolide and L ‐lactide were prepared from their parent acids and then purified by multiple re‐crystallization from ethyl acetate. The thermal and mechanical properties of this polymer were characterized by means of thermogravimetry, differential scanning calorimetry, stress–strain measurements, and dynamic mechanical analysis. The glass transition temperature of the terpolymers changed from 33 to 51°C with composition in a predictable manner. The rheological properties of copolymers and molecular weight of each copolymer were determined showing good processability for making fibers. Using a mini‐extruder, it was possible to produce some filaments. The filaments produced at 140°C had appropriate ductility. The in vitro measurements, specifying the biological properties were also carried out. The sample with monomer composition LLA:GA:TMC = 60:34:6 showed a slower degradation rate than the one with LLA:GA:TMC = 54:34:12. The low‐toxicity bioresorbable terpolymers with good rheological and in vitro properties are the promising new materials for biomedical applications specially a new suture formulation. Copyright © 2011 John Wiley & Sons, Ltd.     

Micromechanical characterization of the interphase layer in semi‐crystalline polyethylene

The interphase layer in semi‐crystalline polyethylene is the least known constituent, compared to the amorphous and crystalline phases, in terms of mechanical properties. In this study, the Monte Carlo molecular simulation results for the interlamellar domain (i.e. amorphous+ interphases), reported in (Macromolecules 2006, 39, 439–447) are employed. The amorphous elastic properties are adopted from the literature and then two distinct micromechanical homogenization approaches are utilized to dissociate the interphase stiffness from that of the interlamellar region. The results of the two micromechanical approaches match perfectly. Interestingly, the dissociated interphase stiffness lacks the common feature of positive definiteness, which is attributed to its nature as a transitional domain between two coexisting phases. The sensitivity analyses reveal that this property is insensitive to the non‐orthotropic components of the interlamellar stiffness and the uncertainties existing in the interlamellar and amorphous stiffnesses. Finally, using the dissociated interphase stiffness, its effective Young's modulus is calculated, which compares well with the effective interlamellar Young's modulus for highly crystalline polyethylene, reported in an experimental study. This satisfactory agreement along with the identical results produced by the two micromechanical approaches confirms the validity of the new information about the interphase elastic properties in addition to making the proposed dissociation methodology quite reliable when applied to similar problems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1228–1243     

Application of SSA thermal fractionation and X‐ray diffraction to elucidate comonomer inclusion or exclusion from the crystalline phases in poly(butylene succinate‐ran‐butylene azelate) random copolymers

Poly(butylene succinate‐ran‐butylene azelate) random copolyesters were thermally fractionated by successive self‐nucleation and annealing (SSA). The samples before and after SSA were analyzed by differential scanning calorimetry (DSC) and X‐ray diffraction (WAXS and SAXS). WAXS results indicate that a small degree of comonomer inclusion is present in the crystalline phases that are formed in the copolymers depending on composition: a PBS‐like unit cell or/and a PBAz‐like unit cell, thus confirming the isodimorphic behavior of the samples. SSA on the other hand demonstrated that the degree of comonomer exclusion during crystallization is far larger than comonomer inclusion, as judged by the increase in fractionation degree with compositions leading to the pseudo‐eutectic point. Furthermore, WAXS, SAXS, and SSA results show that the isodimorphic behavior is not highly dependent on kinetic factors, as the degree of comonomer inclusion or exclusion in the samples was not significantly altered by SSA thermal fractionation, a thermal treatment that promotes annealing and molecular segregation of defects to the amorphous regions of the material. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2346–2358     

Polytetrahydrofuran amphiphilic networks. I. Synthesis and characterization of polytetrahydrofuran acrylate ditelechelic and polyacrylamide‐l‐polytetrahydrofuran networks

A series of novel amphiphilic polyacrylamide‐l‐polytetrahydrofuran (PAm‐l‐PTHF) networks were prepared by the free‐radical copolymerization of hydrophobic ditelechelic polytetrahydrofuran acrylate (PTHFDA) with hydrophilic acrylamide. PTHFDA was synthesized by acrylation of the corresponding hydroxycapped PTHF with acrylic acid in cyclohexane. After acrylation, there was no significant difference in the molecular weights and molecular weight distributions between the original PTHF and the resulting PTHFDA. Network structures and compositions were characterized by elemental analyses, Fourier transform infrared, differential scanning calorimetry, scanning electron microscopy, and swelling data. The networks can swell both in organic solvents and in water, which indicates that they are amphiphilic. The swelling of the networks in different solvents is composition‐dependent. According to differential scanning calorimetry, scanning electron microscopy, and swelling tests, the networks have a microphase‐separated and bicontinuous morphology. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3812–3820, 2000     

Rheological study on structural transition in polyethersulfone‐modified bismaleimide resin during isothermal curing

The structural transition in the polyethersulfone (PES)‐modified bismaleimide resin, 4,4′‐bismaleimidodiphenylmethane (BDM), during isothermal curing was studied by using rheological technique, different scanning calorimetry (DSC), and time resolved light scattering (TRLS). Comparing with the cure of neat bismaleimide, two separate tan δ crossover points were observed because of the phase separation during curing the blends of PES/BDM. These two structural transitions stemmed from the fixing of phase structure of the system and the chemical crosslinking of bismaleimide, respectively. The effect of curing temperature and the PES content on structural transition was discussed and found that the occurrence of two structural transition exhibited the different dependency of curing temperature and PES content. The relaxation exponent n and gel strength S were also found to be temperature‐dependent and composition‐dependent. Moreover, the relaxation exponent n of the second structural transition is much lower than that of the first structural transition in the PES/bismaleimide blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3102–3108, 2006     

Induction of the Columnar Phase of Unconventional Dendrimers by Breaking the C2 Symmetry of Molecules

Two triazine‐based unconventional dendrimers were prepared and characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Differential scanning calorimetry, polarizing microscopy, and powder XRD studies showed that these dendrimers display columnar liquid‐crystalline phases during thermal treatment. This is ascribable to breaking of their C₂ symmetry. The molecular conformations of prepared dendrimers were obtained by computer simulation with the MM3 model of the CaChe program in the gas phase. The simulation showed that the conformations of the prepared dendrimers are rather flat and disfavor formation of the LC phase. However, due to C₂‐symmetry breaking, the prepared dendrimers have structural isomers in the solid state and thus show the desired columnar phases. This new strategy should be applicable to other types of unconventional dendrimers with rigid frameworks.     

Preparation and properties of poly(styrene-co-maleic anhydride)/silica hybrid materials by the in situ sol–gel process

Poly(styrene-co-maleic anhydride)/silica hybrid material has been successfully prepared from styrene–maleic anhydride copolymer and tetraethoxysilane (TEOS) in the presence of a coupling agent (3-aminopropyl)triethoxysilane (APTES) by an in situ sol–gel process. It was observed that the gel time of sol–gel solution was dramatically influenced by the amount of APTES. The hybrid material exhibits optical transparency almost as good as both silica gel and the copolymer. The covalent bonds between organic and inorganic phases were introduced by the aminolysis reaction of the amino group with maleic anhydride units of copolymer to form a copolymer bearing trimethoxysilyl groups, which undergo hydrolytic polycondensation with TEOS. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hybrid materials increases with increasing of SiO₂ composition. Photographs of scanning electron microscopy (SEM) and atomic force microscopy (AFM) inferred that the size of the inorganic particles in the hybrid materials was less than 20 nm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1607–1613, 1998     

Isotactic polypropylene reversible crystallization investigated by modulated temperature and quasi‐isothermal FTIR

Modulated temperature techniques allow to separate the reversing and non‐reversing contributions of material transitions. To investigate reversible crystallization and melting of isotactic polypropylene (iPP) at microstructural level, in this research, modulated temperature Fourier transform infrared (MTFTIR) and quasi‐isothermal FTIR (QIFTIR) analyses are used. By following the intensity variation of iPP regularity bands, associated with 3₁ helix structures of different lengths (n repeating units), MTFTIR evidences that, independently from helix length, a reversing coil–helix transition takes place few degrees below the non‐reversing crystallization onset. By comparing spectroscopic and differential scanning calorimetry experiments performed in quasi‐isothermal conditions, the reversing transition was found to be associated with the reversible melting‐crystallization phenomenon. Moreover, QIFTIR evidences that helices of different lengths contribute differently to the reversible transition: the helices composed of n = 10 and n = 12 are active into all the explored temperature range (30–130 °C) whereas the shortest (n = 6) and the longest (n > 15) helices contribute to reversibility at T > 100 °C. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 922–931     

Influence of the heat treatment conditions on the formation of CuFe2O4 from mechanical milled precursors oxides

Stoichiometric mixture of CuO and ??-Fe₂O₃ milled in air up to 30?h was subjected to different heat treatments. The evolution of the heat treated milled powders was investigated by X-ray diffraction (XRD). The CuFe₂O₄ was partially obtained by milling, the material consisting in a mixture of phases. By applying different heat treatments in air and in vacuum, for 2?C6?h, in 500?C800?°C temperature range the phases composition of the milled samples is changed. A heat treatment at 500?°C in vacuum favours the formation of delafossite (CuFeO₂) and tenorite (CuO) phases. If the same heat treatment is made in air, the CuFe₂O₄ phase formation with a cubic structure is favoured. Differential scanning calorimetry (DSC) investigation realised in Ar atmosphere revealed two large exothermic peaks. The first one is associated with the formation of the delafossite and tenorite phases and the second one with the formation of CuFe₂O₄. The XRD patterns of the samples subjected to the DSC measurements present maxima corresponding to the delafossite and cuprospinel (CuFe₂O₄) phases. For the heat treatment at 600?°C in air the phases present in the sample are the same as for the annealing performed at 500?°C: CuFe₂O₄, ??-Fe₂O₃ and CuO. The heat treatment in air at 800?°C leads to the complete reaction between the different phases and the formation of CuFe₂O₄ phase in whole the sample volume. The CuFe₂O₄ ferrite crystallises after this heat treatment in two crystal systems: cubic and tetragonal.     

Self‐Assembly of Imidazolium‐Based Rodlike Ionic Liquid Crystals: Transition from Lamellar to Micellar Organization

By using aryl‐amination chemistry, a series of rodlike 1‐phenyl‐1H‐imidazole‐based liquid crystals (LCs) and related imidazolium‐based ionic liquid crystals (ILCs) has been prepared. The number and length of the C‐terminal chains (at the noncharged end of the rodlike core) and the length of the N‐terminal chain (on the imidazolium unit in the ILCs) were modified and the influence of these structural parameters on the mode of self‐assembly in LC phases was investigated by polarizing microscopy, differential scanning calorimetry, and X‐ray diffraction. For the single‐chain imidazole derivatives nematic phases (N) and bilayer SmA₂ phases were found, but upon increasing the number of alkyl chains the LC phases were lost. For the related imidazolium salts LC phases were preserved upon increasing the number and length of the C‐terminal chains and in this series it leads to the phase sequence SmA–columnar (Col)–micellar cubic (Cub_I/Pm3n). Elongation of the N‐terminal chain gives the reversed sequence. Short N‐terminal chains prefer an end‐to‐end packing of the mesogens in which these chains are separated from the C‐terminal chains. Elongation of the N‐terminal chain leads to a mixing of N‐ and C‐terminal chains, which is accompanied by complete intercalation of the aromatic cores. In the smectic phases this gives rise to a transition from bilayer (SmA₂) to monolayer smectic (SmA) phases. For the columnar and cubic phases the segregated end‐to‐end packing leads to core–shell aggregates. In this case, elongation of the N‐terminal chains distorts core–shell formation and removes Cub_I and Col phases in favor of single‐layer SmA phases. Hence, by tailoring the length of the N‐terminal chain, a crossover from taper‐shaped to polycatenar LC tectons was achieved, which provides a powerful tool for control of self‐assembly in ILCs.     

Manipulation of Molecular Weight Distribution Shape as a New Strategy to Control Processing Parameters

Molecular weight and dispersity (Ð ) influence physical and rheological properties of polymers, which are of significant importance in polymer processing technologies. However, these parameters provide only partial information about the precise composition of polymers, which is reflected by the shape and symmetry of molecular weight distribution (MWD). In this work, the effect of MWD symmetry on thermal and rheological properties of polymers with identical molecular weights and Ð is demonstrated. Remarkably, when the MWD is skewed to higher molecular weight, a higher glass transition temperature (T _g), increased stiffness, increased thermal stability, and higher apparent viscosities are observed. These observed differences are attributed to the chain length composition of the polymers, easily controlled by the synthetic strategy. This work demonstrates a versatile approach to engineer the properties of polymers using controlled synthesis to skew the shape of MWD.     

Isoconversional kinetic analysis of stoichiometric and off-stoichiometric epoxy-amine cures

The curing reaction of stoichiometric and off-stoichiometric diglycidyl ether of bisphenol A (DGEBA) and 1,3-phenylene diamine (m-PDA) mixtures was studied by differential scanning calorimetry, thermogravimetric analysis and rheological measurements. In order to highlight the side reactions such as etherification and homopolymerization, the neat DGEBA and DGEBA/DMBA (N,N-dimethylbenzylamine) mixture were examined. The classical model-fitting and the advanced isoconversional methods were used to determine the activation energy of the different reactions. The advanced isoconversional method leads to a good agreement between isothermal, nonisothermal and rheological results. The effective activation energies of primary amine epoxy reaction, etherification and homopolymerization were estimated to about 55-60, 104 and 170 kJ mol⁻¹, respectively.     

Free radical polymerization of caffeine‐containing methacrylate monomers

The incorporation of acrylic functionality into caffeine enables the preparation of a vast array of novel thermoplastics and thermosets. A two‐step derivatization provided a novel caffeine‐containing methacrylate monomer capable of free radical polymerization. Copolymers of 2‐ethylhexyl methacrylate and caffeine methacrylate (CMA) allowed for a systematic study of the effect of covalently bound caffeine on polymer properties. ¹H NMR and UV‐vis spectroscopy confirmed caffeine incorporation at 5 and 13 mol %, and SEC revealed the formation of high molecular weight (co)polymers (>40,000 g/mol). CMA incorporation resulted in a multistep degradation profile with initial mass loss closely correlating to caffeine content. Differential scanning calorimetry, rheological, and thermomechanical analysis demonstrated that relatively low levels of CMA increased the glass transition temperature, resulting in higher moduli and elucidating the benefits of incorporating caffeine into polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2829–2837