二苯基膦功能化氧化石墨烯配位固载钯催化Heck偶联反应

将二苯基膦通过共价键引入到氧化石墨烯(GO)中,利用二苯基膦对Pd的鳌合配位作用,合成了GO固载Pd催化剂(GO-P-Pd);通过红外光谱、X射线衍射和X射线光电子能谱等手段对催化剂进行了表征,并考察了其对Heck偶联反应的催化性能.结果表明,该催化剂表现出优异的催化性能,重复使用7次后催化活性无显著降低,并且对不同的反应底物有较好的普适性.     

硅胶固载聚4-乙烯吡啶-Cu(Ⅱ)配合物催化分子氧氧化乙苯的性能研究

以固载于微米级硅胶表面的聚4-乙烯吡啶-铜(Ⅱ)配合物(P4VP-Cu(Ⅱ)/SiO2)为催化剂,以分子氧为氧化剂,在常压下实施了将乙苯氧化为苯乙酮的催化氧化反应;用红外光谱、紫外光谱及液相色谱对产物的化学结构进行了表征;重点研究了催化剂的催化性能,以及各种条件(温度、催化剂性质、催化剂用量等)对催化氧化反应的影响;并分析了催化氧化反应的机理.研究结果表明,固载于硅胶表面的聚4-乙烯吡啶-Cu(Ⅱ)配合物能有效地活化分子氧,显著地催化氧化乙苯为苯乙酮的反应过程;该催化剂具有优良的催化活性与选择性,于130℃常压下通氧气反应10h,可使约60%的乙苯转化为苯乙酮,另一氧化产物α-甲基苄醇的含量则极少.另外,该催化剂具有较好的重复使用稳定性.     

P(4VP-co-St)/SiO2固载的取代钴卟啉对乙苯的催化氧化性能

通过轴向配位法将不同结构的钴卟啉(CoTXPP(X=H, Cl, NO2))分别固载到接枝微粒聚(4-乙烯基吡啶-co-苯乙烯)/SiO2(P(4VP-co-St)/SiO2)上, 室温下分别制备了P(4VP-co-St)/SiO2固载的金属卟啉催化剂CoTPP-P(4VP-co-St)/SiO2, CoTClPP-P(4VP-co-St)/SiO2和CoTNPP-P(4VP-co-St)/SiO2, 利用傅立叶变换红外(FTIR)光谱和电子吸收光谱对其结构及轴配过程进行了表征. 在无溶剂、无助催化剂和还原剂的体系中, 研究对比了其催化分子氧氧化乙苯为苯乙酮的性能, 考察了不同反应条件对苯乙酮产率的影响. 研究发现, 其催化活性随着环外取代基吸电子能力的增强而提高. CoTNPP-P(4VP-co-St)/SiO2的催化活性和选择性最好, 在120 ℃常压下其催化乙苯反应12 h, 苯乙酮收率达到25.53%, 产物α-甲基苄醇的含量则极少. 与普通的催化剂不同, 在催化氧化体系中, CoTNPP-P(4VP-co-St)/SiO2存在最适宜用量, 过量的CoTNPP-P(4VP-co-St)/SiO2反而会使其催化活性降低; P(4VP-co-St)/SiO2表面CoTXPP的固载密度存在一最佳值. 此外, 固载化以后, 催化剂具有较好的重复使用性. 结果表明, 接枝微粒P(4VP-co-St)/SiO2对金属卟啉不仅有明显的保护作用, 而且能提高其稳定性.     

固载化阳离子金属卟啉/杂多阴离子复合催化剂在分子氧氧化乙苯过程中的催化特性

以交联聚苯乙烯微球(CPS)为基质载体, 采用同步合成与固载的方法, 简捷地制得了固载化阳离子苯基卟啉, 继而通过与钴盐的配合反应, 制备了固载化阳离子钴卟啉. 在此基础上, 以Keggin 型杂多酸磷钨酸(HPW)及磷钼酸(HPMo)为试剂, 凭借阳离子钴卟啉(CoP)与杂多阴离子之间的静电相互作用, 制备与表征了固载化的由阳离子钴卟啉与杂多阴离子复合而成的固体催化剂CoPPW-CPS和CoPPMo-CPS. 将两种复合催化剂用于分子氧氧化乙苯的氧化反应, 考察研究了催化特性. 结果表明: 在分子氧氧化乙苯的氧化反应中, 复合催化剂具有很高的催化活性, 可使乙苯高选择性地转化为苯乙酮, 反应12 h, 苯乙酮的产率达30.1%; 复合催化剂的催化活性比单纯的固载化钴卟啉高75%; CoPPW-CPS的催化活性高于CoPPMo-CPS. 在复合催化剂结构组分中, 固载化的杂多阴离子并无催化活性, 起催化作用的组分是钴卟啉; 但是, 杂多阴离子可有效保护钴卟啉, 使其免于被氧化失活, 从而使其保持稳定的高催化活性. 复合催化剂具有最适宜的投加量, 过量催化剂的加入, 会抑制钴卟啉的催化活性. 复合催化剂还具有良好的循环使用性能.     

固载MnP-PGMA/SiO2催化剂的制备及其对乙苯氧化反应的催化性能

在溶液聚合体系中,将聚甲基丙烯酸缩水甘油酯(PGMA)接枝在硅胶微粒表面,制备了接枝微粒PGMA/SiO2;通过环氧键的开环反应,实现了Meso-四(对羟基苯基)卟啉(THPP)在PGMA/SiO2上的键合,制备了键合有羟基苯基卟啉(HPP)的HPP-PGMA/SiO2;进一步使锰盐与HPP-PGMA/SiO2发生配位反应,制备了固载MnP(锰卟啉)-PGMA/SiO2催化剂.以分子氧为氧源,将MnP-PGMA/SiO2催化剂用于乙苯氧化反应,常压下实现了乙苯向苯乙酮的转化,并探索了乙苯氧化过程中的若干规律.结果表明,MnP-PGMA/SiO2催化剂能有效活化分子氧,显著催化乙苯氧化为苯乙酮的反应过程;于95℃常压下反应12 h,苯乙酮收率接近18%,产物α-甲基苄醇的含量则极少.在催化氧化体系中,作为仿生催化剂的MnP存在最适宜用量,过量的MnP反而会抑制催化剂活性.在PGMA/SiO2表面,MnP的固载密度越小,催化剂的活性越高.在循环使用中,催化剂的活性呈升高的趋势.     

介孔Ag_2S固载锰卟啉催化氧化环己烷性能研究

为了充分发挥5,10,15,20-四(4-吡啶基)锰卟啉(Mn TPyP)的催化活性和效率,用介孔硫化银对Mn TPyP进行轴向配位,形成了介孔硫化银固载5,10,15,20-四(4-吡啶基)锰卟啉(Mn TPyP/mp-Ag_2S)纳米孔仿生催化材料,用多种光谱技术对其进行表征.催化材料中S~(2-)与阳离子Mn~(3+)之间有很强的轴向配位作用,这使得催化材料催化氧化环己烷的活性大幅提高,环己烷转化率和醇酮产率分别提高了46.9%和29.6%.催化材料使用了5次后,其催化性能几乎没有下降,这归因于催化材料中强的轴向配位作用和纳米空腔结构功能作用的结果.     

镁铝水滑石负载MnO-4催化氧化乙苯合成苯乙酮

采用焙烧还原法制备了镁铝水滑石负载MnO4-催化剂,并将其应用于催化氧气氧化乙苯合成苯乙酮的反应中。考察了催化剂用量、反应温度、反应时间、MnO4-负载量和镁铝比等因素对催化氧化反应的影响及催化剂的重复使用性能。在优化条件下:催化剂用量3 g,乙苯用量45 mL,反应温度120℃,水滑石结构中n(Mg)/n(Al)=5,氧气流量100 mL/min,苯乙酮产率可达57.0%,苯乙酮选择性可达96.3%,催化剂重复使用3次催化活性降低较小。     

多基团功能化氧化石墨烯协同催化CO2环加成反应

基于氢键给体、阴离子和胺协同催化CO_2环加成反应的设计思想,以廉价、无毒、富含三级胺的六次甲基四胺为前驱体,采用原位固载的方法制得了硅羟基、季铵盐和三级胺功能化的氧化石墨烯(GO)。随后,利用正溴丁烷进一步季铵化合成多阳离子季铵盐功能化的GO(F-GO)无金属多相催化剂。采用红外光谱、元素分析和光电子能谱分析了催化剂表面的组成和含量,证明多阳离子化的策略有利于提高GO表面离子液体的固载量,所制备的F-GO表面季铵盐和三级胺负载量分别为2.23和2.49mmol·g~(-1)。F-GO在无溶剂和无助剂条件下可高效催化CO_2和环氧丙烷环加成反应,碳酸丙烯酯收率可达99.2%(100℃,2 MPa,4 h)。此外,F-GO材料具有较好的耐水性和稳定性,循环6次后活性几乎不变。     

NHPI, CoSPc和TBAB催化的乙苯液-液非均相绿色氧化反应研究

以水为催化剂溶剂与原料乙苯组成液-液非均相体系,以NHPI结合CoSPc组成催化体系,在TBAB为相转移催化剂的作用下,对乙苯的氧化反应条件进行了研究.研究发现乙苯在该催化体系中的最佳氧化条件依次是:水油体积比为3∶1;n(TBAB)∶n(乙苯)=1∶40;n(NHPI)∶n(乙苯)=1∶10,n(NHPI)∶n(CoSPc)=24∶1,反应温度110℃,氧气压力0.75 MPa,搅拌速率350 rpm,反应时间0.5 h.在最佳反应条件下乙苯转化率为60.6%,苯乙酮的选择性为95.2%,1-苯乙醇的选择性为4.5%,产物总选择性达到了99.7%.在此基础上延长反应时间并不能提高乙苯的转化率,苯乙酮的选择性也会下降,研究发现NHPI的分解是乙苯转化率不随反应时间的延长而提高的原因,而苯乙酮的过度氧化为苯甲酸是产物选择性下降的原因.     

氧化石墨烯基钴卟啉复合材料的电催化析氢反应

制备了5,10,15,20-四(苯基)卟啉钴配合物(CoTPP), 并利用该配合物与氧化石墨烯(GO)的π?π堆积作用组装了CoTPP/GO电催化产氢复合材料. 研究发现, 当CoTPP与GO的质量比为1∶15时, 复合材料的性能最佳. 该材料的拉曼和扫描电子显微镜结果显示, 与GO相比, CoTPP/GO复合材料表面的无序程度增加, 形貌改变有利于促进反应体系的电荷迁移与分离; 交流阻抗测试结果显示, 阻抗值由GO的1180 Ω降低为CoTPP/GO材料的734 Ω; 电化学测试结果显示, 析氢起始过电位由-761 mV降低为-337 mV, 塔菲尔斜率由296 mV/dec 降低至174 mV/dec, 法拉第效率却由23%提高至87%. 加入二苯硫醚(SPh₂)轴向配体后, CoTPP(SPh₂)/GO材料的析氢起始过电位进一步降低至-235 mV, 塔菲尔斜率降低至163 mV/dec, 法拉第效率提高至94%. 研究结果表明, 通过氧化石墨烯与金属卟啉的非共价键自组装是构筑石墨烯基电催化产氢材料的一个有效途径.     

Pyrazoles as molecular probes to study the properties of co-crystals by solid state NMR spectroscopy

Equimolar mixtures of 3,5-dimethylpyrazole (1) with four NH-imidazoles (2–5) have been studied by¹³C and ¹⁵N CPMAS NMR and by DSC. In three cases, the solid mixture behaves as the sum of the individual components [imidazole (2), 2-methylimidazole (3) and 2,4(5)-dimethylimidazole (5)]. In one case [4,5-dimethylimidazole (4)], the mixture corresponds to a new species in which the dynamic behavior of1 no longer exists.     

Catalytic air oxidation of manganese in synthetic waters

An attempt was made to study the oxidation of manganese by air in synthetic waters. A series of batch experments were performed at differnet values of concentration, temperature and pH. Unoxidized manganese in the solution was determined by formaldoxime spectrometric method. Results of these studies indicated that the air oxidation of manganese soluble in water can be effectively performed in basic media and that oxidation yield increasedwith an increase in pH and concentration. The yield was very high in the presence of manganese dioxide, sepiolite or clinoptilolite in solution and, the oxidation was almost completed especially at high values of pH and concentration. The reaction was found to be first order with respect to Mn²⁺ with a very low activation energy. A yield of 62% was obtained for the air oxidation of wastewater taken from the treatment plant of Corum Municipality.     

Aqueous p-nitrotoluene oxidation induced with direct glow discharge plasma

A plasma induced degradation process has been studied to treat 4-nitrotoluene (4-NT) present as an aqueous pollutant. The plasma was locally generated from a glow discharge around a tip of a platinum anode in an electrolytic solution. The influence of initial pH and Fe²⁺ on the degradation was examined. Major intermediates resulting from the degradation process were identified. Amongst the aromatic intermediates, p-hydroxybenzoic acid was the predominant degradation product. The formation of oxalic acid, malic acid was also observed. The final products of degradation were NH ₄ ⁺ , NO ₃ ⁻ and CO₂. Based on the analysis of intermediates and the kinetic considerations, the degradation was shown to follow a pseudo-first order reaction hence, a possible reaction pathway was proposed.     

Zur Kenntnis der Reaktionsfähigkeit des Thiomorpholins und alkylsubstituierter Thiomorpholine, 4. Mitt.

Thiomorpholine as well as alkyl substituted thiomorpholines and their Sdioxides, respectively, are transformed into the corresponding N-Aminothiomorpholines by nitrosation (1–5) followed by the reduction with zinc in acetic acid/acetic acid anhydride under simultaneous formation of the corresponding N-acetyl derivates, and hydrolysis by hydrochloric acid (6–9). Examples of this method are described. 4-Aminothiomorpholines and their Sdioxides react with aldehydes or ketones to give azomethines (10–31). Acylation with mono-and dicarbonic acid chlorides leads to the N-acyl derivatives32–44.Mannich condensation is also possible. By oxidation with yellow mercury oxide tetracenes are formed (46–47).

Teil der DissertationM. Schmitz, Techn. Hochschule Aachen, 1975.     

Beiträge zur Chemie der Pyrrolpigmente, 39. Mitt.: Ein Kraftfeldmodell zur konformationsanalytischen Untersuchung von Gallenfarbstoffen

A force field model was designed with respect to the special needs of bile pigments. It is parametrized and tested using partial structures of bile pigments as well as an integral pigment; the solution structures of the molecules were previously deduced using independent experimental methods.

38. Mitt::Falk, H., Schlederer, T., Wolshann, P., Mh. Chem.112, 199 (1981).     

Kinetics and mechanism of oxidation of xylitol and galactitol by hexacyanoferrate(III) ion in aqueous alkaline medium

Kinetics of oxidation of xylitol and galactitol by hexacyanoferrate(III) ion in aqueous alkaline medium is reported. The reaction rate is of first order with respect to hexacyanoferrate(III) in each substrate. The reaction is first order at lower concentrations of xylitol and galactitol and tends towards zero order as the concentration increases. Similarly first order kinetics was obtained with respect to hydroxide ion at lower concentrations and tends to lower order at higher concentration in the oxidation of xylitol; in the oxidation of galactitol the reaction is first order with respect to hydroxide ion even up to manyfold variation. The course of reaction has been considered to proceed through the formation of an activated complex between [K Fe(CN)₆]^2– and substrate anion which decomposes slowly into radical and [K Fe(CN)₆]^3–. A probable reaction mechanism is proposed.

---

Kinetik und Mechanismus der Oxidation von Xylit und Galaktit mit Hexacyanoferrat(III) in wäßriger, alkalischer Lösung

Zusammenfassung Das Geschwindigkeitsgesetz der Titelreaktion ist in beiden Fällen erster Ordnung bezüglich Hexacyanoferrat(III). Die Oxidation ist erster Ordnung bei niedrigen Konzentrationen von Xylit und Galaktit und geht bei Erhöhung der Konzentration gegen null. In gleicher Weise wurde eine Kinetik erster Ordnung bezüglich Hydroxyl bei niedrigen Konzentrationen und eine erniedrigte Ordnung bei höheren Konzentrationen für die Oxidation von Xylit beobachtet; bei Galaktit bleibt die Oxidation auch bei höheren Hydroxyl-Konzentrationen erster Ordnung. Es wird angenommen, daß die Reaktion über einen aktivierten Komplex zwischen [KFe(CN)₆]^2– und dem Substrat-Anion verläuft; dieser Komplex zerfällt in [KFe(CN)₆]^3– und ein Substrat-Radikal. Ein möglicher Reaktionsmechanismus wird vorgeschlagen.

     

Physico-chemical properties of Chitosan films

Chitosan films obtained by dry phase inversion were prepared from an aqueous solution of chitosan in acetic acid. The films, of thickness less than 20 μm, were transparent, very flexible and had smooth surfaces. Increasing the film thickness induced an increase of the internal tensions and the consequent formation of a rough surface. Structural investigations by X-ray diffraction and Fourier transform IR analysis, showed that the chitosan films, as prepared, are amorphous. Further annealing to evaporate acetic acid and water traces, changed the amorphous phase into a more ordered phase, characterized by diffraction peaks at 2θ values of 9, 17, 20 and 23 degrees. Thermal investigations by TG, DTG, and DTA revealed that the decomposition of the chitosan films as prepared proceeds in two stages, starting from 180°C and 540°C.     

A kinetic method for <Emphasis Type="Italic">para</Emphasis>-nitrophenol determination based on its inhibitory effect on the catalatic reaction of catalase

The inhibitory effect of para-nitrophenol on the catalytic reaction of catalase was investigated. Michaelis-Menten kinetic parameters were determined from Lineweaver-Burk plots obtained in the absence or in the presence of the inhibitor. The inhibitor pattern, revealed by the Lineweaver-Burk plots, suggested a fully mixed inhibition mechanism. Spectrophotometric monitoring of the indicator reaction: in conjunction with initial rate measurements was employed for the kinetic determination of the inhibitor. Calibration plots of initial rate vs. para-nitrophenol concentration were linear in the concentration range 0.9·10⁻⁵–2.5·10⁻⁵ mol/L and the detection limit was 3·10⁻⁶ mol/L (417 μg/L) para-nitrophenol. Interferences from other phenolic compounds like orto-cresole, meta-and orto-nitrophenol were observed.     

A unique geometry of the active site of angiotensin-converting enzyme consistent with structure-activity studies

Summary Previous structure-activity studies of captopril and related active angiotensin-converting enzyme (ACE) inhibitors have led to the conclusion that the basic structural requirements for inhibition of ACE involve (a) a terminal carboxyl group; (b) an amido carbonyl group; and (c) different types of effective zinc (Zn) ligand functional groups. Such structural requirements common to a set of compounds acting at the same receptor have been used to define a pharmacophoric pattern of atoms or groups of atoms mutually oriented in space that is necessary for ACE inhibition from a stereochemical point of view. A unique pharmacophore model (within the resolution of approximately 0.15 Å) was observed using a method for systematic search of the conformational hyperspace available to the 28 structurally different molecules under study. The method does not assume a common molecular framework, and, therefore, allows comparison of different compounds that is independent of their absolute orientation.Consequently, by placing the carboxyl binding group, the binding site for amido carbonyl, and the Zn atom site in positions determined by ideal binding geometry with the inhibitors' functional groups, it was possible to clearly specify a geometry for the active site of ACE.     

Polarographische Untersuchung der Kinetik der Polymerisation von Methylvinylketon

The homogeneous polymerization of methyl-vinyl ketone in diluted methanol solutions in presence of proton donors is studied using the polarographic method. The effect of the cation of the indifferent electrolyte is investigated as well as the influence of small quantities of H₂O. Suggestions were made about the possible mechanisms of these influences in the general scheme of the process proposed byHolleck et al.