Standard enthalpies of formation of 2-aminobenzothiazoles in the crystalline phase by rotating-bomb combustion calorimetry

The standard molar enthalpies of combustion of 2-aminobenzothiazole (2AB), 2-amino-4-methyl-benzothiazole (2A4MB), and 2-amino-6-methyl-benzothiazole (2A6MB) were determined in the crystalline phase at T = 298.15 K using a rotating-bomb combustion calorimeter. The molar energies of combustion of these compounds were found to be: (−4273.6 ± 0.9), (−4896.9 ± 1.1), and (−4906.9 ± 1.2) kJ · mol⁻¹, respectively. From these values, the corresponding standard molar enthalpies of formation in the solid phase were obtained as: (59.55 ± 1.28), (2.71 ± 1.50), and (13.53 ± 1.53) kJ · mol⁻¹, respectively. The enthalpies of formation in the gas phase were determined using the experimental enthalpies of formation in the solid phase and predicted values of the enthalpies of sublimation. Additionally, the enthalpies of formation in the gas phase were calculated by means of the Gausian-4 theory, using several gas-phase working reactions, and were compared with those found using the predicted enthalpies of sublimation.     

Thermochemistry of some barium compounds

The molar enthalpies of reaction of metallic barium with 0.047 mol·dm⁻³ HClO₄ as well as the molar enthalpies of dissolution of BaCl₂ in 1.01 mol·dm⁻³ HCl and in water have been measured at T=298.15 K in a sealed swinging calorimeter with an isothermal jacket. From these results the standard molar enthalpy of formation of the barium ion in an aqueous solution at infinite dilution, as well as the enthalpies of formation of barium chloride and barium perchlorate, are calculated to be: Δ_fH⁰_m(Ba²⁺,aq)=−(535.83±1.25) kJ · mol⁻¹; Δ_fH⁰_m(BaCl₂,cr)=−(855.66±1.28) kJ · mol⁻¹; and Δ_fH⁰_m(BaClO₄,cr)=−(796.26±1.35) kJ · mol⁻¹. The results obtained are discussed and compared with previous experimental values.     

The molar enthalpies of solution and vapour pressures of saturated aqueous solutions of some cesium salts

Vapour pressures of water over saturated solutions of cesium chloride, cesium bromide, cesium nitrate, cesium sulfate, cesium formate, and cesium oxalate were determined as a function of temperature. These vapour pressures were used to evaluate the water activities, osmotic coefficients and molar enthalpies of vapourization. Molar enthalpies of solution of cesium chloride, Δ_solH_m(T = 295.73 K; m = 0.0622 mol · kg⁻¹) = (17.83 ± 0.50) kJ · mol⁻¹; cesium bromide, Δ_solH_m(T = 293.99 K; m = 0.0238 mol · kg⁻¹) = (26.91 ± 0.59) kJ · mol⁻¹; cesium nitrate, Δ_solH_m(T = 294.68 K; m = 0.0258 mol · kg⁻¹) = (37.1 ± 2.3) kJ · mol⁻¹; cesium sulfate, Δ_solH_m(T = 296.43 K; m = 0.0284 mol · kg⁻¹) = (16.94 ± 0.43) kJ · mol⁻¹; cesium formate, Δ_solH_m(T = 295.64 K; m = 0.0283 mol · kg⁻¹) = (11.10 ± 0.26) kJ · mol⁻¹ and Δ_solH_m(T = 292.64 K; m = 0.0577 mol · kg⁻¹) = (11.56 ± 0.56) kJ · mol⁻¹; and cesium oxalate, Δ_solH_m(T = 291.34 K; m = 0.0143 mol · kg⁻¹) = (22.07 ± 0.16) kJ · mol⁻¹ were determined calorimetrically. The purity of the chemicals was generally greater than 0.99 mass fraction, except for HCOOCs and (COOCs)₂ where purities were approximately 0.95 and 0.97 mass fraction, respectively. The uncertainties are one standard deviations.     

Determination of the energies of combustion and enthalpies of formation of nitrobenzenesulfonamides by rotating-bomb combustion calorimetry

The energies of combustion for 2-nitrobenzenesulfonamide (cr), 3-nitrobenzenesulfonamide (cr), and 4-nitrobenzenesulfonamide (cr) were determined using a recently described rotating-bomb combustion calorimeter. The condensed phase molar energies of combustion obtained were ?(3479.2 ± 1.0) kJ · mol^?1 for 2-nitrobenzenesulfonamide (cr), ?(3454.2 ± 1.1) kJ · mol^-1 for 3-nitrobenzenesulfonamide (cr), and ?(3450.1 ± 1.9) kJ · mol^-1 for 4-nitrobenzenesulfonamide (cr). From these combustion energy values, the standard molar enthalpies of formation in the condensed phase were obtained as: ?(341.3 ± 1.3) kJ · mol^?1, ?(366.3 ± 1.3) kJ · mol^?1, and ?(370.4 ± 2.1) kJ · mol^?1, respectively. Polyethene bags were used as an auxiliary material in the combustion experiments. The heat capacities and purities of the compounds were determined using a differential scanning calorimeter.     

(Solid + liquid) equilibria for the ternary system (CsBr + LnBr3 + H2O) (Ln = Pr,Nd, Sm) at T = 298.2 K and atmospheric pressure,thermal and fluorescent properties of Cs2LnBr5·10H2O

The (solid + liquid) phase equilibria of the ternary systems (CsBr + LnBr₃ + H₂O) (Ln = Pr, Nd, Sm) at T = 298.2 K were studied by the isothermal solubility method. The solid phases formed in the systems were determined by the Schreinemakers wet residues technique, and the corresponding phase diagrams were constructed based on the measured data. Each of the phase diagrams, with two invariant points, three univariant curves, and three crystallization regions corresponding to CsBr, Cs₂LnBr₅·10H₂O and LnBr₃·nH₂O (n = 6, 7), respectively, belongs to the same category. The new solid phase compounds Cs₂LnBr₅·10H₂O are incongruently soluble in water, and they were characterized by chemical analysis, XRD and TG-DTG techniques. The standard molar enthalpies of solution of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O in water were measured to be (52.49 ± 0.48) kJ · mol⁻¹, (49.64 ± 0.49) kJ · mol⁻¹ and (50.17 ± 0.48) kJ · mol⁻¹ by microcalorimetry under the condition of infinite dilution, respectively, and their standard molar enthalpies of formation were determined as being −(4739.7 ± 1.4) kJ · mol⁻¹, −(4728.4 ± 1.4) kJ · mol⁻¹ and −(4724.4 ± 1.4) kJ · mol⁻¹, respectively. The fluorescence excitation and emission spectra of Cs₂PrBr₅·10H₂O, Cs₂NdBr₅·10H₂O and Cs₂SmBr₅·10H₂O were measured. The results show that the upconversion spectra of the three new solid phase compounds all exhibit a peak at 524 nm when excited at 785 nm.     

Destabilization in the isomeric nitrobenzonitriles: an experimental thermochemical study

The enthalpies of combustion and of sublimation, respectively, of the three isomeric nitrobenzonitriles have been measured: o-, {(−3456.3±2.9), (88.1±1.4)} kJ·mol⁻¹; m-, {(−3442.8±3.3), (92.8±0.3)} kJ·mol⁻¹; p-, {(−3448.2±3.6), (91.1±1.3)} kJ·mol⁻¹. In turn, from these values, the standard molar enthalpies of formation for the condensed and gaseous state, respectively, have been derived: o-, {(130.1±3.1), (218.2±3.4)} kJ·mol⁻¹; m-, {(116.5±3.5), (209.3±3.5)} kJ·mol⁻¹; p-, {(122.0±3.8), (213.1±4.0)} kJ·mol⁻¹. Destabilization energies associated with the presence of the two electron-withdrawing groups have been determined, for o-, m-, and p-nitrobenzonitrile, {(17.6±4.1), (8.7±4.2), and (12.5±4.6)} kJ·mol⁻¹, respectively, and are consistent with those obtained for the corresponding sets of isomeric methyl benzenedicarboxylates, dicyanobenzenes, dinitrobenzenes, and (neutral and ionized) nitrobenzoic acids.     

Energetic effects of ether and ketone functional groups in 9,10-dihydroanthracene compound

The energetic effects caused by replacing one of the methylene groups in the 9,10-dihydroanthracene by ether or ketone functional groups yielding xanthene and anthrone species, respectively, were determined from direct comparison of the standard (p° = 0.1 MPa) molar enthalpies of formation in the gaseous phase, at T = 298.15 K, of these compounds. The experimental static-bomb combustion calorimetry and Calvet microcalorimetry and the computational G3(MP2)//B3LYP method were used to get the standard molar gas-phase enthalpies of formation of xanthene, (41.8 ± 3.5) kJ · mol^?1, and anthrone, (31.4 ± 3.2) kJ · mol^?1. The enthalpic increments for the substitution of methylene by ether and ketone in the parent polycyclic compound (9,10-dihydroanthracene) are ?(117.9 ± 5.5) kJ · mol^?1 and ?(128.3 ± 5.4) kJ · mol^?1, respectively.     

Strain energy of phenanthrene

The strain energy of phenanthrene was derived to be (4.9 ± 2.8) kJ · mol⁻¹, on the basis of the latest standard enthalpies of formation of polycyclic aromatic hydrocarbons. This strain energy agrees well with those estimated from a semi-empirical calculation and from the basicity in hydrogen fluoride solution. The calculation again confirmed the standard enthalpy of formation of phenanthrene, Δ_fH⁰(g)=(201.7±2.9) kJ · mol⁻¹ at T=298.15 K, which was determined by Nagano (J. Chem. Thermodyn. 34 (2002) 377–383). The coupling constant J_4,5 in ¹H-n.m.r. spectrum of phenanthrene in CDCl₃ solution was determined to be 0.55 Hz, which indicates no significant through-space coupling between the 4- and 5-hydrogens.     

Thermodynamic properties of two zinc borates: 3ZnO·3B2O3·3.5H2O and 6ZnO·5B2O3·3H2O

Two pure zinc borates with microporous structure 3ZnO·3B₂O₃·3.5H₂O and 6ZnO·5B₂O₃·3H₂O have been synthesized and characterized by XRD, FT-IR, TG techniques and chemical analysis. The molar enthalpies of solution of 3ZnO·3B₂O₃·3.5H₂O(s) and 6ZnO·5B₂O₃·3H₂O(s) in 1 mol · dm⁻³ HCl(aq) were measured by microcalorimeter at T = 298.15 K, respectively. The molar enthalpies of solution of ZnO(s) in the mixture solvent of 2.00 cm³ of 1 mol · dm⁻³ HCl(aq) in which 5.30 mg of H₃BO₃ were added were also measured. With the incorporation of the previously determined enthalpy of solution of H₃BO₃(s) in 1 mol · dm⁻³ HCl(aq), together with the use of the standard molar enthalpies of formation for ZnO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpies of formation of −(6115.3 ± 5.0) kJ · mol⁻¹ for 3ZnO·3B₂O₃·3.5H₂O and −(9606.6 ± 8.5) kJ · mol⁻¹ for 6ZnO·5B₂O₃·3H₂O at T = 298.15 K were obtained on the basis of the appropriate thermochemical cycles.     

Thermochemistry of two lead borates; Pb(BO2)2·H2O and PbB4O7·4H2O

Two pure hydrated lead borates, Pb(BO₂)₂·H₂O and PbB₄O₇·4H₂O, have been characterized by XRD, FT-IR, DTA-TG techniques and chemical analysis. The molar enthalpies of solution of Pb(BO₂)₂·H₂O and PbB₄O₇·4H₂O in 1 mol dm^?3 HNO₃(aq) were measured to be (?35.00 ± 0.18) kJ mol^?1 and (35.37 ± 0.14) kJ mol^?1, respectively. The molar enthalpy of solution of H₃BO₃(s) in 1 mol dm^?3 HNO₃(aq) was measured to be (21.19 ± 0.18) kJ mol^?1. The molar enthalpy of solution of PbO(s) in (HNO₃ + H₃BO₃)(aq) was measured to be ?(61.84 ± 0.10) kJ mol^?1. From these data and with incorporation of the enthalpies of formation of PbO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpies of formation of ?(1820.5 ± 1.8) kJ mol^?1 for Pb(BO₂)₂·H₂O and ?(4038.1 ± 3.4) kJ mol^?1 for PbB₄O₇·4H₂O were obtained on the basis of the appropriate thermochemical cycles.     

An isoperibol micro-bomb calorimeter for measurement of the enthalpy of combustion of organic compounds. Application to the study of succinic acid and acetanilide

A micro static-bomb combustion calorimeter, developed from a 1107 Parr semi-micro bomb, has been provided with a new micro-bomb and calorimetric bucket. In the best conditions of operation, the energy equivalent of this calorimetric arrangement is just ε(calor)=(731.82 ± 0.22) J · K⁻¹, which means an uncertainty of 0.03 per cent for the calibration with benzoic acid NIST 39j. This combustion calorimeter has been used in the measurement of the enthalpy of combustion of the succinic acid and acetanilide, giving −(1489.3 ± 1.6) kJ · mol⁻¹ and −(4222.5 ± 1.1) kJ · mol⁻¹, respectively, for these substances.     

Standard molar enthalpies of formation of 2-furancarbonitrile, 2-acetylfuran,and 3-furaldehyde

The standard (p^° = 0.1 MPa) molar energies of combustion of 2-furancarbonitrile, 2-acetylfuran, and 3-furaldehyde were measured by static bomb combustion calorimetry; the Calvet high-temperature microcalorimetry was used to measure the enthalpies of vaporization of these liquid compounds. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the liquid phase and the standard molar enthalpies of phase transition, as (106.8 ± 1.1) kJ · mol^?1, ?(207.4 ± 1.3) kJ · mol^?1, and ?(151.9 ± 1.1) kJ · mol^?1, for 2-furancarbonitrile, 2-acetylfuran, and 3-furaldehyde, respectively.Standard molar enthalpies of formation are discussed in terms of the isomerization ortho meta. Enthalpic increment values of the introduction of the functional groups –CN, –CHO, and –COCH₃ were also compared with some other heterocycles; i.e. thiophene and pyridine.     

Low-temperature heat capacity and standard molar enthalpy of formation of 9-fluorenemethanol (C14H12O)

Low-temperature heat capacities of the 9-fluorenemethanol (C₁₄H₁₂O) have been precisely measured with a small sample automatic adiabatic calorimeter over the temperature range between T=78 K and T=390 K. The solid–liquid phase transition of the compound has been observed to be T_fus=(376.567±0.012) K from the heat-capacity measurements. The molar enthalpy and entropy of the melting of the substance were determined to be Δ_fusH_m=(26.273±0.013) kJ · mol⁻¹ and Δ_fusS_m=(69.770±0.035) J · K⁻¹ · mol⁻¹. The experimental values of molar heat capacities in solid and liquid regions have been fitted to two polynomial equations by the least squares method. The constant-volume energy and standard molar enthalpy of combustion of the compound have been determined, Δ_cU(C₁₄H₁₂O, s)=−(7125.56 ± 4.62) kJ · mol⁻¹ and Δ_cH_m^∘(C₁₄H₁₂O, s)=−(7131.76 ± 4.62) kJ · mol⁻¹, by means of a homemade precision oxygen-bomb combustion calorimeter at T=(298.15±0.001) K. The standard molar enthalpy of formation of the compound has been derived, Δ_fH_m^∘(C₁₄H₁₂O,s)=−(92.36 ± 0.97) kJ · mol⁻¹, from the standard molar enthalpy of combustion of the compound in combination with other auxiliary thermodynamic quantities through a Hess thermochemical cycle.     

The standard molar enthalpy of formation,molar heat capacities,and thermal stability of anhydrous caffeine

The constant-volume energy of combustion of crystalline anhydrous caffeine (C₈H₁₀N₄O₂) in α (lower temperature steady) crystal form was measured by a bomb combustion calorimeter, the standard molar enthalpy of combustion of caffeine at T = 298.15 K was determined to be −(4255.08 ± 4.30) kJ · mol⁻¹, and the standard molar enthalpy of formation was derived as −(322.15 ± 4.80) kJ · mol⁻¹. The heat capacity of caffeine in the same crystal form was measured in the temperature range from (80 to 387) K by an adiabatic calorimeter. No phase transition or thermal anomaly was observed in the above temperature range. The thermal behavior of the compound was further examined by thermogravimetry (TG), differential thermal analysis (DTA) over the range from (300 to 700) K and by differential scanning calorimetry (DSC) over the range from (300 to 540) K, respectively. From the above thermal analysis a (solid–solid) and a (solid–liquid) phase transition of the compound were found at T = (413.39 and 509.00) K, respectively; and the corresponding molar enthalpies of these transitions were determined to be (3.43 ± 0.02) kJ · mol⁻¹for the (solid–solid) transition, and (19.86 ± 0.03) kJ · mol⁻¹ for the (solid–liquid) transition, respectively.     

Thermochemical study of the isomeric compounds: 3-acetylbenzonitrile and benzoylacetonitrile

The standard (p° = 0.1 MPa) molar enthalpies of formation of 3-acetylbenzonitrile and benzoylacetonitrile, in the crystalline phase, were derived from the respective standard massic energies of combustion measured by static bomb combustion calorimetry, in oxygen, at T = 298.15 K. The standard molar enthalpies of sublimation, at T = 298.15 K, were measured by Calvet microcalorimetry. From the above experimentally determined enthalpic parameters, the standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, are found to be: (52.4 ± 2.1) kJ · mol⁻¹ and (74.8 ± 2.5) kJ · mol⁻¹ for 3-acetylbenzonitrile and benzoylacetonitrile, respectively.Molecular structures were computed using highly accurate ab initio techniques. Standard molar enthalpies of formation of the experimentally studied compounds were derived using an appropriate set of working reactions. Very good agreement between the calculated and the experimental values was obtained, so the calculations were extended to the estimates of the standard molar enthalpies of formation of 2- and 4-acetylbenzonitriles whose study was not performed experimentally.Our results were further interpreted and rationalized in terms of the enthalpic stability and compared to other relevant disubstituted benzenes.     

Thermochemistry of uracil and thymine revisited

Thermochemical properties of uracil and thymine have been evaluated using additional experiments. Standard (p⁰ = 0.1 MPa) molar enthalpies of formation in the gas phase at T = 298.15 K for uracil −(298.1 ± 0.6) and for thymine −(337.6 ± 0.9) kJ · mol⁻¹ have been derived from energies of combustion measured by static bomb combustion calorimetry and molar enthalpies of sublimation determined using the transpiration method. The G3 and G4 quantum-chemical methods were used for calculations of theoretical gaseous enthalpies of formation being in very good agreement with the re-measured experimental values.     

High-temperature calorimetry of zirconia: Heat capacity and thermodynamics of the monoclinic–tetragonal phase transition

The high-temperature heat capacity of zirconia was directly measured by differential scanning calorimetry between T = (1050 and 1700) K and derived from the heat content measured by transposed temperature drop calorimetry between T = (970 and 1770) K, including the monoclinic–tetragonal (m–t) phase transition region. The enthalpy and entropy of the m–t phase transition are (5.43 ± 0.31) kJ · mol⁻¹ and (3.69 ± 0.21) J · K⁻¹ · mol⁻¹, respectively. Values of thermodynamic functions are provided from room temperature to 2000 K.     

Calorimetric investigation of mixing enthalpy of liquid (Co + Cu + Zr) alloys at T = 1873 K

The enthalpies of mixing of liquid (Co + Cu + Zr) alloys have been determined using the high-temperature isoperibolic calorimeter. The measurements have been performed along three sections (x_Co/x_Cu = 3/1, 1/1, 1/3) with x_Zr = 0 to 0.55 at T = 1873 K. Over the investigated composition range, the partial mixing enthalpies of zirconium are negative. The limiting partial enthalpies of mixing of undercooled liquid zirconium in liquid (Co + Cu) alloys are (−138 ± 18) kJ · mol⁻¹ (the section x_Co/x_Cu = 3/1), (−155 ± 10) kJ · mol⁻¹ (the section x_Co/x_Cu = 1/1), and (−130 ± 22) kJ · mol⁻¹ (the section x_Co/x_Cu = 1/3). The integral mixing enthalpies are sign-changing. The isenthalpic curves have been plotted on the Gibbs triangle. The main features of the composition dependence of the integral mixing enthalpy of liquid ternary alloys are defined by the pair (Co + Zr) and (Cu + Zr) interactions.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.     

Thermodynamic properties of soddyite from solubility and calorimetry measurements

The release of uranium from geologic nuclear waste repositories under oxidizing conditions can only be modeled if the thermodynamic properties of the secondary uranyl minerals that form in the repository setting are known. Toward this end, we synthesized soddyite ((UO₂)₂(SiO₄)(H₂O)₂), and performed solubility measurements from both undersaturation and supersaturation. The solubility measurements rigorously constrain the value of the solubility product of synthetic soddyite, and consequently its standard-state Gibbs free energy of formation. The log solubility product (lg K_sp) with its error (1σ) is (6.43 + 0.20/−0.37), and the standard-state Gibbs free energy of formation is (−3652.2 ± 4.2 (2σ)) kJ mol⁻¹. High-temperature drop solution calorimetry was conducted, yielding a calculated standard-state enthalpy of formation of soddyite of (−4045.4 ± 4.9 (2σ)) kJ · mol⁻¹. The standard-state Gibbs free energy and enthalpy of formation yield a calculated standard-state entropy of formation of soddyite of (−1318.7 ± 21.7 (2σ)) J · mol⁻¹ · K⁻¹. The measurements and associated thermodynamic calculations not only describe the T = 298 K stability and solubility of soddyite, but they also can be used in predictions of repository performance through extrapolation of these properties to repository temperatures.