DODMAC／n—C10H21OH／10%n—C10H22／H2O体系溶致液晶的^2H NMR和SAXS…

５０℃下，测定了双十八烷基二甲基氯化铵（ＤＯＤＭＡＣ）／ｎ－Ｃ１０Ｈ２１ＯＨ／１０％ｎ－Ｃ１０Ｈ２２／Ｈ２Ｏ四元体系相图，确定了液晶区域范围，用＾２Ｈ ＮＭＲ方法，并辅以偏光显微镜照片，确定了液晶为反相六角状，用ＳＡＸＳ求出了液晶晶面间距，确定了晶面间距ｄ１与含水量ｆｗ／（１－ｆｗ）之间的线性关系，并求得圆柱形聚集体的直径ｄｓ＝４．０３５ｎｍ。     

甲基丙烯酸甲酯和联苯酯的基团转移共聚研究

研究了甲基丙烯酸甲酯（ＭＭＡ）和甲基丙烯酸联苯酯（ＢＰＭＡ）的基团转移共聚．用１Ｈ ＮＭＲ、ＩＲ、ＧＰＣ和ＤＳＣ等手段对共聚物进行了表征．测得两种单体在苯、四氢呋喃和乙腈中的竞聚率（３０℃）分别为γ１＝０５６±００３、０５２±００３、０４６±００３和γ２＝０７９±００３、０８１±００３、０８５±００３．得到了实测分子量和理论分子量相近，分散性较小的共聚物     

微量元素与体内自由基反应的多元分析

食管癌患者体内环境与正常人的差异,表现在体内自由基反应的相关因子的含量不同,选取有关的生化指标作统计学分析,结果显示：（１）单相关分析有统计学意义的指标是Ｃｕ,Ｃｄ,Ｓｅ,Ｍｎ－ＳＯＤ,ＭＤＡ,ＧＳＨ－Ｐｘ,Ｃｕ／Ｚｎ,Ｚｎ／Ｃｄ;（２）逐步回归分析,建立回归方程：ｙ＝３．９８９０＋２．２３９９ｘ（Ｃｕ）－２２．４９ｘ（Ｃｕ／Ｚｎ）－０．０５０３ｘ（ＭＤＡ）－０．４３３５ｘ（Ｃｄ）。以此方程作两值     

丙烯腈和(甲基)丙烯酸酯基团转移共聚合的竞聚率

研究了丙烯腈（ＡＮ）和甲基丙烯酸甲酯（ＭＭＡ）、乙酯（ＥＭＡ）、丁酯（ＢＭＡ）、丙烯酸丁酯（ＢＡ）和顺丁烯二酸二丁酯（ＤＢＭ）等５种酯类单体的基团转移无规共聚．用Ｋｅｌｅｎ Ｔｕｄｕｓ法测定了二元共聚体系的竞聚率，分别为ｒＡＮ＝１０２２、ｒＭＭＡ＝０７７、ｒＡＮ＝５６８、ｒＥＭＡ＝０１６、ｒＡＮ＝８５９、ｒＢＭＡ＝００９、ｒＡＮ＝４０８、ｒＢＡ＝００６；ｒＡＮ＝１３８，ｒＤＢＭ＝００６．发现竞聚率，单体组分对聚合速率的影响等都和阴离子共聚类似．     

含金鸡钠碱的光活性聚合物：2.含辛可宁的两亲单体及其两亲聚合物

通过两亲单体２－丙烯酰胺基烷磺酸与辛可宁成盐后再聚合，或ＡＭＣｎＳ聚合成梳型两亲聚合物后再生ＣＮ成盐，可获得含辛可宁的两亲聚合物。ＡＭＣｎＳ－ＣＮ盐及其相应的两亲聚合物具有比ＣＮ好得多的溶解性，易溶于氯仿、ＴＨＦ、乙醇、ＤＭＦ和ＤＭＳ等极性不同的溶剂。ＡＭＣｓＳ－ＣＮ盐好得多的溶解性，易溶于氯仿、ＴＨＦ、乙醇、ＤＭＦ和ＤＭＳＯ等极性不同的溶剂。ＡＭＣｎＳ－ＣＮ盐在乙醇／氯仿（Ｖ／Ｖ＝１／２）中比旋     

胺基铪茂催化乙烯/1-辛烯无规共聚合的研究

在亚乙基双（ 茚基） 二胺化茂铪（ｒａｃ Ｃ２Ｈ４（Ｉｎｄ）２Ｈｆ（ＮＭｅ２）２ ,简称１ ,Ｉｎｄ ＝ 茚基,Ｍｅ＝ 甲基） 催化作用下,对乙烯（Ｅ） 与１ 辛烯（Ｏ） 无规共聚合进行了研究．作为比较,利用异亚丙基（ 环戊二烯基）（１ 芴基） 二甲基锆茂催化体系（（ＣＨ３）２Ｃ（Ｆｌｕｏ）（Ｃｐ）ＺｒＭｅ２ ,简称２ ,Ｆｌｕｏ ＝ 芴基,Ｃｐ ＝ 环戊二烯基） 对乙烯／１ 辛烯在相同共聚合条件下进行了共聚合．结果表明,在单体浓度比［Ｏ］／［Ｅ］ 较小时共聚合速率随单体浓度比增加而增加,进一步增加单体浓度比则导致共聚合速率降低．催化体系１／Ａｌ（ｉＢｕ）２Ｈ／［Ｐｈ３Ｃ］［Ｂ（Ｃ６Ｆ５）４］（３） 催化共聚活性比２／ ＭＡＯ高得多．共聚物中辛烯含量随反应单体１ 辛烯含量的增加而增加,两单体竞聚率乘积（ ｒＥ×ｒｏ） 小于１ ,表明聚合物为无规共聚物．相同共聚单体浓度比下１／Ａｌ（ｉＢｕ）２Ｈ／３ 催化共聚物中辛烯含量比２／ ＭＡＯ 共聚物中辛烯含量高,表明前者具有更强的共聚合能力．所得无规共聚物熔点温度、结晶度、本体粘度及密度随共聚物中辛烯含量的增加而显著降低．辛烯含量较高时共聚物呈现明显无结晶行为．差示扫描量热分析显示,同乙烯均聚?     

单茂钛催化剂的丙烯无规聚合反应及其动力学研究

比较了不同钛化合物／甲基铝氧烷（ＭＡＯ）催化体系的丙烯无规聚合，催化活性次序为ＣｐＴｉ（ＯＲ）３＞ＣｐＴｉ（ＯＰｈ）３＞ＣｐＴｉＣｌ３＞Ｃｐ２ＴｉＣｌ２＞Ｔｉ（ＯＢｕ）４＞ＴｉＣｌ４＞Ｔｉ（ＯＢｕ）２Ｃｌ２，所得聚丙烯用沸庚烷抽提８ｈ，溶解９５％以上，可溶部分经１３Ｃ ＮＭＲ、ＷＡＤＸ、ＦＴＩＲ等分析证明为无规聚丙烯（ａＰＰ），是没有结晶性的弹性体．ＧＰＣ测出其分子量Ｍｗ＝８．０～１０．０×１０４，Ｍｗ／Ｍｎ≈２．０．探索了催化体系ＣｐＴｉ（Ｏ ｎ Ｐｒ）３／ＭＡＯ中钛的浓度、［Ａｌ］／［Ｔｉ］摩尔比，丙烯聚合压力，聚合温度和时间对丙烯聚合反应的影响．研究了该催化体系丙烯聚合反应动力学规律，表观聚合反应速率对催化剂浓度和单体压力（浓度）都呈一级反应关系，表观聚合速率常数ＫＰ＝２９２×１０５ｍｏｌ／Ｌ·ｈ（４０℃）．活化能ΔＥ＝－７．８８×１０３Ｊ·ｍｏｌ－１，碰撞因子Ａ＝１．４１×１０－４ｍｏｌ／Ｌ·ｈ．     

甲基丙烯酸二甲氨基乙酯溴代烷季铵盐与苯乙烯共聚合的研究

以甲基丙烯酸二甲氨基乙酯溴代乙烷（ Ｍ Ａ Ｅ Ｂ） 或丁烷（ Ｍ Ａ Ｂ Ｂ） 季胺盐与苯乙烯（ Ｓｔ）为单体,采用溶液自由基共聚合方法,合成了一类新型阳离子两亲共聚物．详细地研究了聚合条件及共聚物的溶解性．共聚物“亲油”和“亲水”单元的无规结构被 Ｉ Ｒ、１ Ｈ Ｎ Ｍ Ｒ 及１３ Ｃ Ｎ Ｍ Ｒ所证实．最后,用线性化（ Ｙ Ｂ Ｒ） 法分别求得 Ｍ Ａ Ｅ Ｂ／ Ｓｔ 和 Ｍ Ａ Ｂ Ｂ／ Ｓｔ 的单体竞聚率,ｒ Ｍ Ａ Ｂ Ｂ ＝０４４ ,ｒ Ｓｔ ＝ ０１５ ,ｒ Ｍ Ａ Ｅ Ｂ＝ ０６６ ,ｒ Ｓｔ＝ ０３６ ．     

苯酚氧化羰化合成碳酸二苯酯的新型PdCl2-Co(Pyca)2催化体系

研究了新型的Ｐｄ－Ｃｏ催化体系催化氧化碳化苯酚合成碳酸二苯酯。当ｎ（ＰｄＣｌ２）：ｎ「Ｃｏ（Ⅱ）」：ｎ（四丁基化铵）：ｎ（苯醌）＝１：１：１０：２５,Ｔ＝１２０,Ｐ＝２．５ＭＰａ（Ｐｃｏ／Ｐｏ２＝４：１）,反应时间８ｈ,ＰｄＣｌ２－Ｃｏ（Ｐｙｃａ）２比ＰｄＣｌ２－Ｃｏ（ＯＡｃ）２的催化活性高。当使用ＰｄＣｌ２－Ｃｏ（Ｐｙｃａ）２催化剂时,ＤＰＣ的产率为６．０３％。最佳的反应温度是１２０℃,ＤＰＣ的产率随着体系的总压增加而增大,当压力升到３．５ＭＰａ时,ＤＰＣ产率为８．５３％。     

单体极性对甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸钠无皂乳液共聚合的影响

研究了少量甲基丙烯酸钠（ＮａＭＡ）存在下单体极性对甲基丙烯酸甲酯（ＭＭＡ）／丙烯酸丁酯（ＢＡ）无皂乳液共聚合的影响．单体极性降低，使粒径减小、聚合速率提高、乳液表面张力和粘度降低、粒子表面电荷密度增大、聚合物分子量提高．ＭＭＡ／ＮａＭＡ无皂乳液聚合物只呈现一个玻璃化温度Ｔｇ，ＢＡ／ＮａＭＡ无皂乳液聚合物呈现两个Ｔｇ，ＭＭＡ／ＢＡ比为２∶１～１∶２的ＭＭＡ／ＢＡ／ＮａＭＡ无皂乳液聚合物呈现四个Ｔｇ，这是由于粒子外面相对富含ＯＳＯ－３和ＣＯＯ－基聚合物的亚层溶解了较多的水，使ＢＡ向粒子中心扩散，ＭＭＡ向外扩散，造成组成差异和相分离而引起的．     

含铅透明树脂聚合分相及其光学特性研究

<正> 在分子链中引入金属离子可以提高聚合物材料的玻璃化转变温度和折光指数,研制防辐射材料及有机发光材料,但含有重金属离子的树脂在聚合时体系易产生分相出现半透明或不透明,影响材料的透光性。本文研究了甲基丙烯酸铅[Pb(MA)_2]与苯乙烯(St)、甲基丙烯酸(MA)及甲基丙烯酸甲酯(MMA)共聚过程分相及     

多组份含金属盐透明树脂的合成

本文将双烯聚醚砜大分子单体(BPS-MA)引入含金属(Pb、Ba等)盐单体的苯乙烯体系中进行聚合,发现单体配比与树脂透明性密切相关。对于Pb(MA)_2/St/MA/BPS-MA四元体系,欲获得透明树脂,BPS-MA用量大于20％时,摩尔比MA/[Pb(MA)_2]可由原来的5.5降至2.2左右,并且可获得n_D>1.60的透明材料。光学性能测试结果表明,Pb(MA)_2、BPS-MA量增加,n_D增大,阿贝数v_D略降低;MA量增加,n_D下降v_D略增加。适当的配比可望制备出性能优异的多组份含金属盐透明聚合物材料。     

STUDY ON THE MODIFICATION OF POLY (METHYL METHACRYLATE) TRANSPARENT MATERIAL

A kind of transparent plastic material has been prepared with bulk copolymer of MMA-MA containing MA 20 vol% as matrix modified by introducing EtOH during bulk copolymerization to increase the transparency and by copolymerizing together with metallic salts of MA forming ionomer polymer to improve the heat-tolerance and hardness. The effect of the contents of the additives on the heat stability, hardness and transparency of the copolymer has been studied. The optical homogeneity of the copolymer material has also been examined. It has been found that the specific property of transparent material of this kind may be obtained by controlling the amounts of EtOH and metallic salt of MA.     

Swelling of Lalpha-phases by matching the refractive index of the water-glycerol mixed solvent and that of the bilayers in the block copolymer system of (EO)15-(PDMS)15-(EO)15

The swelling of Lalpha-phases from the block copolymer polyethylenoxide-b-polydimethylsiloxane-polyethylenoxide (EO)15-(PDMS)15-(EO)15 in water/glycerol mixtures is reported. At low and medium polymer concentrations (<60%), the block copolymer forms a turbid vesicular dispersion in water. With time, the small unilamellar vesicles (SUV) and the large multilamellar vesicles (MLV) separate into a two phase L1/Lalpha-system. The turbid dispersions of the Lalpha-phase below 60% of the compound become more and more transparent with increasing glycerol and at 60% of glycerol become completely clear. Replacement of water by the solvent glycerol thus lowers the turbidity of the dispersion and swells the interlamellar distance between the bilayers. A 20% aqueous L1/Lalpha-dispersion can thus be transformed into a single birefringent transparent Lalpha-phase. The swelling of the Lalpha-phase in water and the decrease of the turbidity of the dispersion by the addition of glycerol is explained by the matching of the refractive index of the solvent to the refractive index of the bilayers of the block copolymer. The matching of a refractive index lowers the Hamaker constant in the DLVO theory between the bilayers and therefore decreases the attraction between the bilayers what allows them to swell to a larger separation. The microstructures in the phases were determined by cryo- and FFR-TEM. The interlamellar distance between the bilayers was determined by SAXS measurements. The viscous properties of the Lalpha-phases were determined by oscillatory rheological measurements. In comparison to other Lalpha-phases from normal surfactants, the Lalpha-phases from the block copolymer (EO)15-(PDMS)15-(EO)15 have low shear moduli. This is probably due to the high flexibility of the poly dimethylsiloxane block in the bilayers what can be recognized on the non-spherical shapes of the SUV's.     

Development of Methods to Determine the Infrared-Optical Properties of Polymer Films

Summary: In this paper, two methods for the determination of infrared optical properties of thick polymer films, based on FTIR spectroscopy, were implemented and used. Complex index of refraction data were generated for various ethylene copolymer films. Transmittance and reflectance spectra were measured in the mid infrared range using a gold-coated 100 mm-diameter integrating sphere. For the investigated films n and k values ranging from 1.3 to 1.6 and from 10⁻⁴ to 0.25 were determined, respectively. Regarding n, a good agreement was obtained for both methods, the transmittance/reflectance procedure (T/R method) used for transparent and semitransparent regions, and Single Substractive Kramers-Kronig (SSKK) algorithm applied for non-transparent regions. The highest k values were determined for the CH₂ stretching vibration. The k values are dependent on comonomer content and film thickness. The combination of both methods allows for an accurate determination of n and k in the entire IR region relevant for solar application.     

Quantitative characterization of the optical properties of absorbing polymer films: Comparative investigation of the internal reflection intensity analysis method

Nondestructive, three‐dimensional refractive‐index measurements are used for the determination of both the crystallinity and orientation in thin polymer films. The prism wave‐guide coupler is particularly suited for three‐dimensional isotropic and anisotropic thin‐film studies because of the quantitative character of the information obtained and the ease of data acquisition. It has been limited, however, to determining only the refractive index of transparent or weakly absorbing thin‐film samples. On the basis of thin‐film optics, this study develops a new internal reflection intensity analysis (IRIA) method, which uses the intensity information rather than the conventional mode angle values to acquire both the refractive index and the extinction coefficient over a range of transparent to highly absorbing polymer films. Therefore, the IRIA method overcomes the limitations of this prism wave‐guide coupler technique, which can only measure the refractive index of a weakly absorbing sample. With a Metricon PC‐2010 as the skeletal framework, a prototype instrument has been developed to apply and test the IRIA method. A study comparing both the refractive index and extinction coefficient obtained with ellipsometry, ultraviolet–visible/near‐infrared reflectometry, and IRIA for solvent blue 59 dyed polystyrene films confirms that the IRIA method is effective for obtaining the three‐dimensional refractive indices and extinction coefficients of polymer films. In addition, the refractive index and extinction coefficient spectrum (400–800 nm) of solvent blue 59 have been determined with the effective media theory. Furthermore, the three‐dimensional complex refractive indices of highly absorbing black electrical tape, inaccessible to other optical measurement because of its surface character, has been determined by the IRIA method. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 842–855, 2003     

两种含硫光学树脂的合成与性能研究

光学树脂以其质量轻、耐冲击、价格便宜、加工成型方法简单等特点已在眼镜片、建材、光学透镜等许多领域代替光学玻璃而得到广泛应用［１］．随着现代科技的不断发展,人们对材料性能的要求不断提高,不同应用场合对材料的某些性能还有特殊要求［２,３］．目前市场上广泛...     

含烟碱配体的一维链状Cd(Ⅱ)配聚物的合成、晶体结构及其荧光性质

以氯化镉、烟碱(Nicotine)为原料在N,N-二甲基甲酰胺(DMF)溶液中反应,合成了1个新的一维链状Cd髤配聚物[Cd3(μ-Cl)6(Nicotine)2(DMF)2(H2O)2]n,用红外光谱、粉末X衍射、X-射线单晶衍射和热重分析对配合物进行了表征。X-射线单晶衍射表明,配合物属单斜晶系,空间群P21,晶胞参数:a=0.998 02(19)nm,b=1.836 89(15)nm,c=1.082 6(2)nm,β=95.809(3)°,V=1.974 5(5)nm3,Z=2,μ(Mo Kα)=2.045 mm-1,F(000)=1 044.0,R1=0.049 9,wR2=0.118 8[Ⅰ>2σ(Ⅰ)]。配合物中镉离子位于扭曲的配位八面体中心,相邻镉离子通过2个氯离子桥连形成了一维链结构,Nicotine、DMF、H2O占据配位八面体的剩余配位点,配聚物一维链平行于a轴。室温固态荧光测试显示,配聚物在448.5、573 nm处具有强的荧光发射。     

新型复合环氧光学树脂的制备与性能研究

通过2,2-二巯基乙硫醚(MES)与环氧氯丙烷反应合成了2,2-二巯基二乙硫醚二缩水甘油醚型环氧树脂(DGEMES),通过FTIR和MS对其进行表征;用乙二胺作为固化剂,将DGEMES与双酚A型环氧树脂(DGEBA)复合固化,得到了新型高折射率和低色散的光学树脂.DGEMES是一种较好的共聚单体,可以同时提高共聚树脂的折射率和阿贝数;DGEBA/DGEMES/乙二胺共固化树脂的nd=1.59～1.62,νd=35～39;当DGEMES的质量分数为40%时,固化树脂的折射率达到1.60以上,冲击强度22.5kJ/m₂,且其它性能较均衡.此外,以甲基六氢苯酐(B-650)为固化剂,还合成了具有中等折射率的DGEBA/DGEMES/B-650共固化树脂(nd=1.54～1.56,νd=38～40),并对其光学和机械性能进行了研究.     

Reactions of titanium alkoxide with SiH containing polymers as a route to titanium/siloxane hybrid materials with enhanced refractive index

Reactions of titanium tetrabutoxide with polyhydromethylsiloxane (PHMS) and with some hydromethylsiloxane copolymers were used for synthesis of light transparent materials having enhanced refractive index. The FTIR, ¹H NMR and ²⁹Si NMR spectroscopies were used to study the reaction between PHMS and titanium tetrabutoxide in toluene. Reaction of SiH functional siloxane polymers with titanium tetrabutoxide results in a titanium-containing heterosiloxane prepolymers that are stable under anhydrous anaerobic conditions. Exposure of the resulting materials to humid air transforms them into light transparent titanium/siloxane nanocomposites with enhanced refractive index. The films of these composites formed during the spin-coating process were characterized by UV–Vis, ellipsometry, IR and ²⁹Si NMR spectroscopies and transmission electron microscopy (TEM). Titanium/siloxane hybrid films obtained on the basis of poly(phenylmethylsiloxane-co-hydromethylsiloxane) copolymer are free of cracks and have a refractive index of up to 1.60.