Production of Lipid and Fatty Acids during Growth of <Emphasis Type="Italic">Aspergillus terreus</Emphasis> on Hydrocarbon Substrates

An Aspergillus terreus, isolated from oil contaminated soil, could degrade a wide range of petroleum hydrocarbons including the immediate oxidation products of hydrocarbons, like alkanols and alkanals. Among all the linear chain carbon substrates, highest growth of 39.1 ± 3.8 g l⁻¹ (wet weight) was observed when n-hexadecane was used as the sole source of carbon. The growth of the fungus on this highly hydrophobic substrate was associated with the morphological change of the hyphae and increase production of lipid in the cells. The lipid production in the hydrocarbon (n-hexadecane) grown cells was sevenfold higher than the corresponding glucose grown cells. The fatty acid profile of the lipid content formed in the hydrocarbon grown cells was significantly different from the glucose grown cells and was composed of fatty acids with chain length C₁₄ to C₃₃ as revealed from the liquid chromatography electrospray ionization mass spectrometry analyses. Among the ranges, the fatty acids with chain lengths C₁₄ to C₁₈ were predominant in the profile. Considering the fatty acid profile and the high level of lipid production, this A. terreus mediated production of lipid is envisaged to have potential application in the oleochemical industries including the production of biodiesel.     

Determination of fatty acids in atmospheric samples via GC/MS

Summary Atmospheric precipitation and aerosol samples are characterized by a complex mixture of several organic compounds. A simple method for the simultaneous determination of the main compound classes by GC/MS is presented. In detail, seasonal variations of C₈–C₃₂ fatty acids in precipitation in a semirural area have been studied. Total fatty acids concentrations of 7–53 g/l were detected. Summer rain is characterized by high amounts of fatty acids >C₂₀ and lower amounts of C₁₁–C₂₀ species. Two effects may be responsible: larger emission rates of fatty acids during vegetation periods and an increased influence of vapour phase due to higher temperatures during summer. CPI values showed no general trend; lower CPI values for winter rain could not be observed. This would be expected if anthropogenic sources play an important role. Monounsaturated fatty acids (C_16:1, C_18:1) were more abundant during winter than in summer. High concentrations of polyunsaturated fatty acids (C_18:x) could be detected during summer. High relative concentrations of the potential oxidation products of the unsaturated species, nonanedioic acid and w-oxononanoic acid, are associated with relatively low concentrations of their precursors.     

Reductive Methylation of Homogeneous Primary β-Lauryl/myristyl 7/3 Polyethyleneoxy n = 3–18 Ethylamines under Phase-Transfer Catalysis Conditions

Homogeneous tertiary N,N-dimethyl-N-β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylamines, LM(EO)_nAT, are niche intermediates in the synthesis of homogeneous N-alkyl (C₁–C₁₈)-N,N-dimethyl-N-β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylammonium chlorides (unitary degree of oligomerization of ethylene oxide in the polyoxyethylene chain). This paper synthetically presents the dependence of the reductive methylation yields of homogeneous primary β-lauryl/myristyl 7/3 polyethyleneoxy n = 3–18 ethylamines, LM(EO)_nAP, on the reaction time (10–90 min), the temperature (70 °C), the molar ratio formic aldehyde /LM(EO)_nAP (1.1/1–2.5/1), the molar ratio HCOOH/LM(EO)_nAP (5/1), the degree of oligomerization of ethylene oxide in the homogeneous polyoxyethylene chain in the 3,6,9,12,18 series, and the structure of the phase-transfer catalysts. The steric effects of hydrophobic groups CH₃ and C₁₈H₃₇ grafted onto the ammonium function, and the micellar phenomena in the vicinity of their critical micellar concentration, directly proportional to the homogeneous degree of oligomerization, were highlighted. In all cases, a steady increase in reductive methylation yields was observed, with even quantitative values obtained. The high purity of the homologous series LM(EO)_nAT will allow their personalization as reference structures for the study of the evolution of basic colloidal characteristics useful in forecasting technological applications. LM(EO)_nAP were obtained either by direct amidoethylation (nucleophilic addition under basic catalysis of homogeneous lauryl/myristyl 7/3 polyethoxylated n = 3, 6, 9, 12, 18 alcohols, LM(EO)_nOH, to acrylamide monomer) or by cyanoethylation of LM(EO)_nOH under basic catalysis at 25–50 °C, in the presence of Fe²⁺ cations as oligomerization/polymerization inhibitor, followed by partial acid hydrolysis of homogeneous β-alkyl (C₁₂H₂₅/C₁₄H₂₉) 7/3 polyethyleneoxy n = 3, 6, 9, 12, 18 propionitriles, LM(EO)_nPN, to β-alkyl (C₁₂H₂₅/C₁₄H₂₉) 7/3 polyethyleneoxy n = 3, 6, 9, 12, 18 propionamides, LM(EO)_nPD, which led to LM(EO)_nAP by Hoffmann degradation. Homogeneous higher tertiary polyetheramines LM(EO)_nAT were structurally characterized.     

The composition of the organic acids of CO2 extracts of some spice-aromatic plants

Summary 1. It is desirable to analyze the composition of the organic acids of CO₂ spice extracts after their preliminary separation into individual groups according to their physicochemical properties: steam-volatile, ester-bound obtained after the hydrolysis of esters of nonglyceride nature, and acids forming components of the triglycerides.2. Characteristic for the fraction of steam-volatile free acids and for the ester-bound acids in the CO₂ extracts obtained after the hydrolysis of esters of nonglyceride nature are the C₁–C₇ low-molecular-weight saturated acids of the alipatic series: formic, isovaleric, valeric, caproic, etc. The higher fatty acids present include acids with even and odd numbers of carbon atoms from C₈ to C₁₈ and also acids with saturated and unsaturated bonds.3. The compositions of the lower acids in the extracts of all the samples studied are qualitatively very similar. Their quantitative compositions differ fundamentally. At the same time, differences both in the qualitative and in the quantitative compositions of the glyceride acids of the samples investigated are more pronounced. This is due to the circumstance that fruit was subjected to extraction in one case and leaves and rhizomes in another.Krasnodar Scientific-Research Institute of the Food Industry. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 763–767, November–December, 1977.     

Zinc catalysed electrophilic C–H borylation of heteroarenes

Cationic zinc Lewis acids catalyse the C–H borylation of heteroarenes using pinacol borane (HBPin) or catechol borane (HBCat). An electrophile derived from [IDippZnEt][B(C₆F₅)₄] (IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) combined with N,N-dimethyl-p-toluidine (DMT) proved the most active in terms of C–H borylation scope and yield. Using this combination weakly activated heteroarenes, such as thiophene, were amenable to catalytic C–H borylation using HBCat. Competition reactions show these IDipp–zinc cations are highly oxophilic but less hydridophilic (relative to B(C₆F₅)₃), and that borylation proceeds via activation of the hydroborane (and not the heteroarene) by a zinc electrophile. Based on DFT calculations this activation is proposed to proceed by coordination of a hydroborane oxygen to the zinc centre to generate a boron electrophile that effects C–H borylation. Thus, Lewis acid binding to oxygen sites of hydroboranes represents an under-developed route to access reactive borenium-type electrophiles for C–H borylation.

Cationic zinc Lewis acids catalyse the C–H borylation of heteroarenes using pinacol borane (HBPin) or catechol borane (HBCat).     

A Multifunctional N-Doped Cu–MOFs (N–Cu–MOF) Nanomaterial-Driven Electrochemical Aptasensor for Sensitive Detection of Deoxynivalenol

Deoxynivalenol (DON) is one of the most common mycotoxins in grains, causing gastrointestinal inflammation, neurotoxicity, hepatotoxicity and embryotoxicity, even at a low quantity. In this study, a facile electrochemical aptasensor was established for the rapid and sensitive determination of DON based on a multifunctional N-doped Cu-metallic organic framework (N–Cu–MOF) nanomaterial. The N–Cu–MOF, with a large specific surface area and good electrical conductivity, served not only as an optimal electrical signal probe but also as an effective supporting substrate for stabilizing aptamers through the interactions of amino (-NH₂) and copper. Under the optimal conditions, the proposed sensor provided a wide linear concentration range of 0.02–20 ng mL⁻¹ (R² = 0.994), showing high sensitivity, with a lower detection limit of 0.008 ng mL⁻¹, and good selectivity. The sensor’s effectiveness was also verified in real spiked wheat samples with satisfactory recoveries of 95.6–105.9%. The current work provides a flexible approach for the rapid and sensitive analysis of highly toxic DON in food samples and may also be easily extended to detect other hazardous substances with alternative target-recognition aptamers.     

Stabilizing a three-center single-electron metal–metal bond in a fullerene cage

Trimetallic carbide clusterfullerenes (TCCFs) encapsulating a quinary M₃C₂ cluster represent a special family of endohedral fullerenes with an open-shell electronic configuration. Herein, a novel TCCF based on a medium-sized rare earth metal, dysprosium (Dy), is synthesized for the first time. The molecular structure of Dy₃C₂@I_h(7)-C₈₀ determined by single crystal X-ray diffraction shows that the encapsulated Dy₃C₂ cluster adopts a bat ray configuration, in which the acetylide unit C₂ is elevated above the Dy₃ plane by ∼1.66 Å, while Dy–Dy distances are ∼3.4 Å. DFT computational analysis of the electronic structure reveals that the endohedral cluster has an unusual formal charge distribution of (Dy₃)⁸⁺(C₂)²⁻@C₈₀⁶⁻ and features an unprecedented three-center single-electron Dy–Dy–Dy bond, which has never been reported for lanthanide compounds. Moreover, this electronic structure is different from that of the analogous Sc₃C₂@I_h(7)-C₈₀ with a (Sc₃)⁹⁺(C₂)³⁻@C₈₀⁶⁻ charge distribution and no metal–metal bonding.

A novel trimetallic carbide clusterfullerene, Dy₃C₂@I_h(7)-C₈₀, was successfully synthesized and isolated, and the encapsulated Dy₃C₂ cluster adopts a bat ray configuration featuring an unprecedented three-center single-electron Dy–Dy–Dy bond.     

Oxygenated acids of the lipids ofOnopordum acanthium seeds

The structures of the oxygenated fatty acids of the lipids ofOnopordum acanthium L. seeds have been studied by the methods of chemical, chromatographic, and spectral analyses. Triepoxy acids of the C₁₈ series and 24 monohydroxy acids with chain lengths of C₁₄–C₁₈ have been identified, of which the 8-OH-9Z,12Z-18:2 and the 14-OH-9Z,12Z-18:2 acids have been isolated as natural compounds for the first time.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Republic of Uzbekistan, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 515–518, July–August, 1993.     

Analysis of fatty acids in mouse cells using reversed-phase high-performance liquid chromatography

Summary A reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed to analyze various fatty acids in recombinant mouse L cells. These fatty acids were the metabolites of oleic acid. A process was developed to extract fatty acids from the cell samples before RP-HPLC analysis. The samples were first saponified with 0.5 M NaOH in 96% ethanol then extracted with acidified ethyl acetate. After extraction, the sample was dried and dissolved in HPLC-grade methanol. After centrifugation to remove insoluble impurities, the sample was applied to a C₁₈RP-HPLC column using a gradient of acetonitrile (ACN)-H₂O. The eluted fatty acids were monitored by ultraviolet (UV) absorption at 195 nm and identified by retention time and adsorption spectrum comparison. This method successfully resolved various fatty acids and provided a tool for the elucidation of the fatty acid metabolic pathway in the cells.     

Spontaneous S–Si bonding of alkanethiols to Si(111)–H: towards Si–molecule–Si circuits

We report the synthesis of covalently linked self-assembled monolayers (SAMs) on silicon surfaces, using mild conditions, in a way that is compatible with silicon-electronics fabrication technologies. In molecular electronics, SAMs of functional molecules tethered to gold via sulfur linkages dominate, but these devices are not robust in design and not amenable to scalable manufacture. Whereas covalent bonding to silicon has long been recognized as an attractive alternative, only formation processes involving high temperature and/or pressure, strong chemicals, or irradiation are known. To make molecular devices on silicon under mild conditions with properties reminiscent of Au–S ones, we exploit the susceptibility of thiols to oxidation by dissolved O₂, initiating free-radical polymerization mechanisms without causing oxidative damage to the surface. Without thiols present, dissolved O₂ would normally oxidize the silicon and hence reaction conditions such as these have been strenuously avoided in the past. The surface coverage on Si(111)–H is measured to be very high, 75% of a full monolayer, with density-functional theory calculations used to profile spontaneous reaction mechanisms. The impact of the Si–S chemistry in single-molecule electronics is demonstrated using STM-junction approaches by forming Si–hexanedithiol–Si junctions. Si–S contacts result in single-molecule wires that are mechanically stable, with an average lifetime at room temperature of 2.7 s, which is five folds higher than that reported for conventional molecular junctions formed between gold electrodes. The enhanced “ON” lifetime of this single-molecule circuit enables previously inaccessible electrical measurements on single molecules.

Spontaneously formed Si–S bonds enable monolayer and single-molecule Si–molecule–Si circuits.     

Forensic differentiation of biogenic organic compounds from petroleum hydrocarbons in biogenic and petrogenic compounds cross-contaminated soils and sediments

“Total petroleum hydrocarbons” (TPHs) or “petroleum hydrocarbons” (PHCs) are one of the most widespread soil pollutants in Canada, North America, and worldwide. Clean-up of PHC-contaminated soils and sediments costs the Canadian economy hundreds of million of dollars annually. Much of this activity is driven by the need to meet regulated levels of PHC in soil. These PHC values are legally required to be assessed using standard methods. The method most commonly used in Canada, specified by the Canadian Council of Ministers of the Environment (CCME), measures the total hydrocarbon concentrations in a soil by carbon range (Fraction 1: C₆–C₁₀; Fraction 2: C₁₀–C₁₆, Fraction 3: C₁₆–C₃₄: and Fraction 4: C₃₄+). Using the CCME method, all of the materials extractible by a mixture of 1:1 hexane:acetone are considered to be petroleum hydrocarbon contaminants. Many hydrocarbon compounds and other extractible materials in soil, however, may originate from non-petroleum sources. Biogenic organic compounds (BOCs) is a general term used to describe a mixture of organic compounds, including alkanes, sterols and sterones, fatty acids and fatty alcohols, and waxes and wax esters, biosynthesized by living organisms. BOCs are also produced during the early stages of diagenesis in recent aquatic sediments. BOC sources could include vascular plants, algae, bacteria and animals. Plants and algae produce BOCs as protective wax coating that are released back into the sediment at the end of their life cycle. BOCs are natural components of thriving plant communities. Many solvent-extraction methods for assessing soil hydrocarbons, however, such as the CCME method, do not differentiate PHCs from BOCs. The naturally occurring organics present in soils and wet sediments can be easily misidentified and quantified as regulated PHCs during analysis using such methods. In some cases, biogenic interferences can exceed regulatory levels, resulting in remediation of petroleum impacts that are not actually present. Consequently, reliance on these methods can trigger unnecessary and costly remediation, while also wasting valuable landfill space. Therefore, it is critically important to develop new protocols to characterize and differentiate PHCs and BOCs in contaminated sediments. In this study, a new reliable gas chromatography–mass spectrometry (GC–MS) method, in combination with a derivatization technique, for characterization of various biogenic compounds (including biogenic alkanes, sterols, fatty acids and fatty alcohols) and PHCs in the same sample has been developed. A multi-criteria approach has been developed to positively identify the presence of biogenic compounds in soil and sediment samples. More than thirty sediment samples were collected from city stormwater management (SWM) ponds and wetlands across Canada. In these wet sediment samples, abundant biogenic n-alkanes, thirteen biogenic sterols, nineteen fatty carboxylic acids, and fourteen fatty alcohols in a wide carbon range have been positively identified. Both PHCs and BOCs in these samples were quantitatively determined. The quantitation data will be used for assessment of the contamination sites and toxicity risks associated with the CCME Fraction 3 hydrocarbons.     

Enhanced catalytic reaction at an air–liquid–solid triphase interface

Gaseous reactant involved heterogeneous catalysis is critical to the development of clean energy, environmental management, health monitoring, and chemical synthesis. However, in traditional heterogeneous catalysis with liquid–solid diphase reaction interfaces, the low solubility and slow transport of gaseous reactants strongly restrict the reaction efficiency. In this minireview, we summarize recent advances in tackling these drawbacks by designing catalytic systems with an air–liquid–solid triphase joint interface. At the triphase interface, abundant gaseous reactants can directly transport from the air phase to the reaction centre to overcome the limitations of low solubility and slow transport of the dissolved gas in liquid–solid diphase reaction systems. By constructing a triphase interface, the efficiency and/or selectivity of photocatalytic reactions, enzymatic reactions, and (photo)electrochemical reactions with consumption of gaseous reactants oxygen, carbon dioxide, and nitrogen are significantly improved.

Gaseous reactant involved liquid–solid diphase interface reactions can be significantly enhanced using rationally designed and constructed air–liquid–solid triphase systems.     

Exploring benzylic gem-C(sp3)–boron–silicon and boron–tin centers as a synthetic platform

A stepwise build-up of multi-substituted C_sp³ carbon centers is an attractive, conceptually simple, but often synthetically challenging type of disconnection. To this end, this report describes how gem-α,α-dimetalloid-substituted benzylic reagents bearing boron/silicon or boron/tin substituent sets are an excellent stepping stone towards diverse substitution patterns. These gem-dimetalloids were readily accessed, either by known carbenoid insertion into C–B bonds or by the newly developed scalable deprotonation/metallation approach. Highly chemoselective transformations of either the C–Si (or C–Sn) or the C–B bonds in the newly formed gem-C_sp³ centers have been achieved through a set of approaches, with a particular focus on exploiting the synthetically versatile polarity reversal in organometalloids by λ³-aryliodanes. Of particular note is the metal-free arylation of the C–Si (or C–Sn) bonds in such gem-dimetalloids via the iodane-guided C–H coupling approach. DFT calculations show that this transfer of the (α-Bpin)benzyl group proceeds via unusual [5,5]-sigmatropic rearrangement and is driven by the high-energy iodine(iii) center. As a complementary tool, the gem-dimetalloid C–B bond is shown to undergo a potent and chemoselective Suzuki–Miyaura arylation with diverse Ar–Cl, thanks to the development of the reactive gem-α,α-silyl/BF₃K building blocks.

This work explores divergent reactivity of the benzylic gem-boron–silicon and boron–tin double nucleophiles, including the arylation of the C–B bond with Ar–Cl, along with a complementary oxidative λ³-iodane-guided arylation of the C–Si/Sn moiety.     

Engineering plasticization resistant gas separation membranes using metal–organic nanocapsules

Membrane technologies hold great potential for industrial gas separation. Nevertheless, plasticization, a common phenomenon that is responsible for the loss of gas pair selectivity and the decrease of membrane lifespan, is one of the top challenges withholding the deployment of advanced membrane materials in realistic applications. Here, we report a highly generalizable approach, that utilizes PgC₅Cu, a copper metal–organic nanocapsule (MONC) containing 24 open metal sites (OMSs) as a multi-dentate node to coordinatively crosslink polymers. By adding merely 1–3 wt% of PgC₅Cu, a wide range of carbonyl group-containing polymers can be effectively crosslinked. Through rigorous dissolution tests, molecular dynamic simulations, and in situ FT-IR spectroscopy, we qualitatively and quantitatively unveiled the coordinative binding nature at the polymer–MONC interface. As a result, we produced a series of composite membranes showing near complete plasticization resistance to CO₂, C₂H₄, and C₂H₆ under high pressure with no loss of mechanical and gas transport properties.

Ultra-small metal–organic nanocapsules (MONCs) with open metal sites (OMSs) are used as multi-dentate nodes to form coordinative crosslinking networks with polymers.     

Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-Mo₂C nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-Mo₂C@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo–O surface layer, thus producing intimate O–Mo–C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O–Mo–C interfaces for these surface-engineered ultrafine nanostructures. The β-Mo₂C@NPCC electrocatalyst exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) in water. Theoretical studies indicate that the highly accessible ultrathin O–Mo–C interfaces serving as the active sites are crucial to the HER performance and underpinned the outstanding electrocatalytic performance of β-Mo₂C@NPCC. This proof-of-concept study opens a new avenue for the fabrication of highly efficient catalysts for HER and other applications, whilst further demonstrating the importance of exposed interfaces and interfacial contacts in efficient electrocatalysis.

Ultrafine β-Mo₂C nanostructures encapsulated in N-doped carbon capsules featuring O–Mo–C interfaces as the active sites for HER have been unveiled.     

Determination of fatty acids in soil samples by gas chromatography with mass spectrometry coupled with headspace solid‐phase microextraction using a homemade sol–gel fiber†

Through the use of a homemade sol–gel‐derived fiber, a headspace solid‐phase microextraction technique coupled to gas chromatography with mass spectrometry was developed for the determination of fatty acids with long, even‐numbered carbon chains (C₁₂–C₂₄) in soil samples. The experimental parameters such as reaction time, temperature, and ionic strength that might affect derivatization, extraction, and desorption were investigated. Under the optimized conditions, the linearity of the method ranged from 0.1 to 100 mg/L with a correlation coefficient >0.997. The limit of detection values based on a signal‐to‐noise ratio of 3:1 were determined with the concentration from 0.39 to 39.4 μg/L. The recoveries of the method for the soil samples were from 91.15 to 108.1%. This developed method using a homemade fiber showed a higher sensitivity than that using a commercial polydimethylsiloxane fiber and was also for the analysis of real soil samples from the Paomaling geological park of China.     

Oxygenated acids of the reserve lipids of Rumex paulsenianus

The composition of the fatty mono- and dihydroxy acids of the fruit ofRumex paulsenianus Rech. fil. (familyPolygonaceae) has been determined by a combination of IRS, UVS, GLC, and mass-spectrometric methods. (22) Monohydroxy acids of the C₁₄–C₂₀ series, including isomers and isologues, and four dihydroxy acids from C₁₈ to C₂₀, including a new isomeric 9-OH-10, 12–17:2 acid have been detected.Institute of the Chemistry of Plant Substances, Uzbek Academy of Sciences, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 762–765, November–December, 1991.     

Oxygenated acids of the lipids ofOnopordum acanthium seeds

The structures of the oxygenated fatty acids of the lipids ofOnopordum acanthium L. seeds have been studied by the methods of chemical, chromatographic, and spectral analyses. Triepoxy acids of the C₁₈ series and 24 monohydroxy acids with chain lengths of C₁₄–C₁₈ have been identified, of which the 8-OH-9Z,12Z-18:2 and the 14-OH-9Z,12Z-18:2 acids have been isolated as natural compounds for the first time.     

A conductive metal–organic framework photoanode

We report the development of photosensitizing arrays based on conductive metal–organic frameworks (MOFs) that enable light harvesting and efficient charge separation. Zn₂TTFTB (TTFTB = tetrathiafulvalene tetrabenzoate) MOFs are deposited directly onto TiO₂ photoanodes and structurally characterized by pXRD and EXAFS measurements. Photoinduced interfacial charge transfer dynamics are investigated by combining time-resolved THz spectroscopy and quantum dynamics simulations. Sub-600 fs electron injection into TiO₂ is observed for Zn₂TTFTB–TiO₂ and is compared to the corresponding dynamics for TTFTB–TiO₂ analogues that lack the extended MOF architecture. Rapid electron injection from the MOF into TiO₂ is enhanced by facile migration of the hole away from the interfacial region. Holes migrate through strongly coupled HOMO orbitals localized on the tetrathiafulvalene cores of the columnar stacks of the MOF, whereas electrons are less easily transferred through the spiral staircase arrangement of phenyl substituents of the MOF. The reported findings suggest that conductive MOFs could be exploited as novel photosensitizing arrays in applications to slow, and thereby make difficult, photocatalytic reactions such as those required for water-splitting in artificial photosynthesis.

We report the development of photosensitizing arrays based on conductive metal–organic frameworks (MOFs) that enable light harvesting and efficient charge separation.     

Diaryldichalcogenide radical cations

One-electron oxidation of two series of diaryldichalcogenides (C₆F₅E)₂ (13a–c) and (2,6-Mes₂C₆H₃E)₂ (16a–c) was studied (E = S, Se, Te). The reaction of 13a and 13b with AsF₅ and SbF₅ gave rise to the formation of thermally unstable radical cations [(C₆F₅S)₂]˙⁺ (14a) and [(C₆F₅Se)₂]˙⁺ (14b) that were isolated as [Sb₂F₁₁]^– and [As₂F₁₁]^– salts, respectively. The reaction of 13c with AsF₅ afforded only the product of a Te–C bond cleavage, namely the previously known dication [Te₄]²⁺ that was isolated as [AsF₆]^– salt. The reaction of (2,6-Mes₂C₆H₃E)₂ (16a–c) with [NO][SbF₆] provided the corresponding radical cations [(2,6-Mes₂C₆H₃E)₂]˙⁺ (17a–c; E = S, Se, Te) in the form of thermally stable [SbF₆]^– salts in nearly quantitative yields. The electronic and structural properties of these radical cations were probed by X-ray diffraction analysis, EPR spectroscopy, and density functional theory calculations and other methods.