Synthesis of chiral calix[4]arenes bearing tartaric ester moieties

The synthesis of chiral calix[4]arenes with tartaric acid ester moieties has been achieved by the reactions of tartaric ester chloroacetates with calix[4]arenes in moderate yields. All the chiral calix[4]arene derivatives are in a cone conformation according to the ¹H NMR doublet–doublet pattern of the protons of the methylene groups between the phenol rings. The results of NMR and specific rotations indicate that the molecules have C₂ symmetry with asymmetric features.     

Preparation of enantiopure inherently chiral calix[5]arenes

Enantiopure inherently chiral calix[5]arenes were successfully prepared by separation of their (R)-BINOL diastereomeric derivatives of the corresponding racemates by column chromatography instead of HPLC. A new type of inherently chiral calix[5]arene was obtained.     

p-Sulfonic acid calix[n]arenes as homogeneous and recyclable organocatalysts for esterification reactions

Esterification yields were significantly improved using calix[n]arenes catalysts under simple conditions. p-Sulfonic acid calix[4]arene and p-sulfonic acid calix[6]arene were powerful organocatalysts in several esterification reactions, which showed activity comparable or even superior to other well-established acids catalysts, such as, sulfuric acid, p-toluenesulfonic acid, and p-hydroxybezenesulfonic acid described in the literature.     

Regioselective ipso-nitration of calix[4]arenes

A novel protection/deprotection method leading to the regioselective ipso-substitution of calix[4]arenes is described. The introduction of nosyl (p-nitrobenzenesulfonyl) groups into the lower rim of partly alkylated tert-butylcalix[4]arenes leads subsequently to the exclusive ipso-nitration of the alkylated phenol rings, while the protecting groups can be easily removed in the next step. This method gives dialkoxy- or trialkoxy-substituted calix[4]arenes with nitro groups on the alkylated rings and tert-butyl groups on the remaining ones. The above substitution pattern is complementary to the isomers so far known in the chemistry of calix[4]arenes and could be used in the design of novel type of calixarene-based receptors.     

Synthesis of cesium selective pyridyl azocalix[n]arenes

A series of pyridylazo calix[n]arenes (n=4, 6, 8) including the first examples of mixed hetroaryl azocalix(n)arenes have been synthesized by coupling calix[n]arenes with diazonium salts derived from amino pyridines. It has been observed that the coupling reaction of diazonium salt obtained from 3-aminopyridine with calix[n]arene gives tetrakis-, hexakis- and octakis (pyridylazo)calix[n]arenes (n=4,6,8) while those derived from 4-aminopyridine give partially substituted (4-pyridylazo)calix[n]arene analogs. There is no reaction of calix(n)arenes with diazonium salts derived from 2-aminopyridine under identical conditions of experiments. The conformational analysis of synthesized compounds have been ascertained by detailed spectral measurements and single crystal X-ray analysis of 5-(3′-pyridylazo)-25,26,27,28-tetrahydroxycalix[4]arene. A rational explanation for the observed partial and exhaustive coupling reaction in the synthesis of heteroaryl azocalix(n)arenes has been suggested. Preliminary evaluation of synthesized derivatives as molecular receptors for metal ions indicates that they have good potential to function as selective ionic filters for cesium ions.     

Synthesis of terpyridine-substituted calix[n]arenes

Calix[n]arenes (n = 4,5) comprising 4-(2,2′:6′,2″-terpyridyl)-phenyl substituents at the upper rim were synthesized for the first time, employing Suzuki-type coupling reactions. All calix[n]arene derivatives were prepared as cone conformers. The single crystal X-ray structure of cone-5,11,17,23-tetra{4-(2,2′:6′,2″-terpyridyl)-phenyl}-25,26,27,28-tetrabutoxycalix[4]arene 4 is analyzed in terms of structural rigidity and potential use of these ligands as novel synthons of cage-type metallosupramolecular assemblies.     

Synthesis and evaluation of deep cavity imidazolyl calix[n]arenes

A series of deep cavity diphenyl imidazolyl calix[n]arenes (4, 6, 8) have been obtained from readily available starting materials through a five step synthetic methodology involving appropriate alkylation of lower rim of preformed calixarene, formylation of the upper rim and subsequent condensation with aryl diketones in the presence of ammonium acetate and glacial acetic acid. Optimized reaction conditions for obtaining the titled derivatives in their cone configuration and their characterization by spectroscopic methods (IR, UV, NMR and FAB mass) have been delineated. The synthesized imidazolyl calixarenes have preliminarily been examined for selective recognition of monovalent metal ions (Li⁺, Na⁺, K⁺, Cs⁺, Ag⁺).     

Synthesis of new calix[4]arenes containing nucleoside bases

A family of novel calix[4]arene derivatives containing nucleoside bases were designed and synthesized. Coupling reaction between para mono- or bis-amino calix[4]arenes 5, 6 or 7 and thymin-1-ylacetic acid in the presence of DCC afforded mono- or bis-thymine-substituted calix[4]arenes 8, 9 or 10 in over 70% yield. Owing to the low solubility of adenine-N⁹-ylacetic acid in DMF and DMSO and the weak nucleophilicity of aminocalix[4]arene derivatives, alternatively, the substitution reaction of bromoacetylated aminocalix[4]arenes derivatives 11, 12, 13 with adenine in the presence of sodium hydride was carried out to synthesize mono- or bis-adenine-substituted calix[4]arenes. Two kinds of isomers 15 and 16 or 17 and 18 were obtained due to the non-regiospecific alkylation of adenine, and their structures have been confirmed by ¹³C NMR and ¹H NMR spectra.     

Bridge-disubstituted calix[4]arenes obtained via a new preparative route. Synthesis and structural study

A series of calix[4]arenes bearing various substituents including alkyl, p-bromobenzyl, carboxy and allyl at opposite methylene bridges has been synthesized via successive metallation followed by nucleophilic substitution. In a first step, mono-lithiated calix[4]arenes react with terminal bromoalkanes to give 2-alkylated calix[4]arenes or with CO₂ the respective calixarene-2-carboxylic acid in good yields. A second lithiation step of the monosubstituted products with subsequent attachment of both polar and non-polar substituents yields several new diametrally bridge-disubstituted calix[4]arenes. 2D-NMR measurements establish the disubstituted calixarenes to predominantly adopt the 1,2-alternate conformation in solution. First examples of X-ray crystal structures of the new type of disubstituted calix[4]arenes are described featuring the calix[4]arene also in the rare 1,2-alternate conformation.     

Biochemistry of anionic calix[n]arenes

This review treats the biological properties of the various anionic calix[n]arenes, both as soluble forms and in the colloidal state. The complexation of these molecules with amino-acids, peptides and proteins is discussed, as is their interaction with model membranes. The complexations with various Active Pharmaceutical Ingredients as complexes, for tamoxifen as solid state and colloidal structures, are treated in depth. Two sections deal with the direct biological action of the calix[n]arenes and their use as biosensors. A final section deals with the toxicity, in reality the lack of toxicity of the calix[n]arenes.     

Synthesis of tetra-oligothiophene-substituted calix[4]arenes and their optical and electrochemical properties

A facile and efficient approach to synthesize tetra-oligothiophene-substituted calix[4]arenes, Calix-OT(n) with n up to 4 using palladium-catalyzed Kumada coupling of thienylmagnesium bromide and bromo-substituted calix[4]arene as a key step has been developed. The close proximity of the tetra-oligothiophenes constructed within a calix[4]arene assembly leads to peak/band broadening, spectral shifting, i.e., blue-shift in absorption and red-shift in emission spectra as well as fluorescence quantum yield quenching as compared to those of monomers indicating the existence of chromophoric interaction. We have shown that the intra-chromophoric interaction lowers the first ionization (raises HOMO level) of an oligothiophene within an assembly. It also stabilizes the formation of a radical cation, which results in an increase in the subsequent voltammetric oxidation and the occurrence of the higher oxidation states as compared to the monomeric counterparts. This assembly can serve as a model for the investigation of molecular interaction of π-conjugated systems.     

Solubilizing effect of the p-phosphonate calix[n]arenes towards poorly soluble drug molecules such as nifedipine, niclosamide and furosemide

This article reports the solubilization of the practically water insoluble drug molecules such as nifedipine, niclosamide and furosemide by guest:host inclusion complexation with p-phosphonates calix[n]arenes as drug soluble agent. This complexation studies were carried out by using the phase solubility technique. From the obtained results, it was observed that the solubility of drug molecules was significantly increased in the presence of calix[n]arene host molecules. The increase in solubility of drugs by the calix[n]arene was most probably due to inclusion complexation between drug molecules and cavities of the calixarene skeleton similar to drug:cyclodextrin complexes.     

New chiral macrocyclic ligands. Design and synthesis of (R)-cysteine-containing calix[4]arenes

Four cysteine-containing calix[4]arenes, including three bis-cysteine bridged and one non-bridged, were synthesized by the reaction of calix[4]arene diacid dichloride with the corresponding S-alkylated cysteine esters.     

The facile preparation of p-(methoxy)calix[n]arenes (n = 6, 7, or 8) and their permethylated derivatives

The mixture of p-(methoxy)calix[n]arenes (n = 6, 7 or 8) was prepared in one step from p-methoxyphenol under basic conditions, and their fully methylated derivatives p-(dimethyloxy)calix[n]arenes (n = 6, 7 or 8) were also prepared and purified by column chromatography to indentify their structures. In this process, the single crystal of p-(dimethyloxy)calix[7]arene was obtained and its structure was confirmed. The proportion of p-(methoxy)calix[6]-, [7]- and [8]-arenes in the mixture obtained from the reaction was investigated under different reaction conditions, and p-(methoxy)calix[6]- and [8]-arenes could be separated from the mixture by solvent extraction. In addition, the host-guest interaction of p-(dimethyloxy)calix[6]arene with methyl-4,4′-bipyridinium hexafluorophosphate in organic solvents was investigated.     

Calix[n]arenes as Synthetic Membrane Transporters: A Minireview

Several potential applications of functionalized calix[n]arenes as carriers in transport through membranes of various biological compounds aiming their separation are reviewed. Specific aspects of membrane transport and the use of calix[n]arenes for building synthetic ion channels are discussed.     

杯芳烃和柱芳烃桥梁部位的衍生及其功能化

随着大环化学的快速发展,对杯芳烃、柱芳烃及其他类似化合物的桥梁亚甲基部位进行高效修饰的方法日益引起人们的关注.桥梁部位修饰后的大环衍生物,在不改变其原有属性的基础上增加了新的功能,不仅可以引入更多的功能基团,而且可以通过主客体的自组装行为,进一步拓展杯芳烃和柱芳烃等超分子大环在药物递送、化学传感、荧光体系构建等诸多领域的应用.本文对杯芳烃和柱芳烃桥梁部位修饰的研究进展进行了综述.按照修饰方法的不同进行分类,系统阐述了杯芳烃和柱芳烃桥梁部位修饰的方法、修饰后结构的变化,以及相应的应用拓展,并进一步讨论了其未来发展所面临的机遇与挑战.     

Fullerene encapsulation with calix[5]arenes

This paper presents the synthesis of the fullerene hosts based on the calix[5]arenes and their binding properties. Calix[5]arenes 1a, 2, 3a bind C₆₀ or C₇₀ in organic solvents. The solvent effect of the fullerene complexation was clearly observed; the association constant decreases in a solvent with high solubility for C₆₀. Covalently linked double-calix[5]arenes 4-6 were also investigated on their binding properties for fullerenes in organic solvents. Their binding abilities for both C₆₀ and C₇₀ are extremely high in toluene solution. Higher binding selectivity toward C₇₀ is observed by all the double-calix[5]arenes. The selectivity of 5a toward C₇₀/C₆₀ is highest in toluene with a value of 10. The structures of the supramolecular complexes of the calix[5]arene hosts and C₆₀ or C₇₀ were investigated by using ¹H and ¹³C NMR studies. The molecular mechanics calculation and X-ray structure reveal that the interior of the calix[5]arene is complementary to the exterior of C₆₀ molecule. In contrast, the host-guest complexes of C₇₀ with the simple calix[5]arenes take many conformational options due to its less symmetric shape. The molecular mechanics calculation and our chemical shift simulation nicely worked to estimate the reliable structures; the calix[5]arene cavity takes up C₇₀ molecule, and the C₇₀ molecule tilts significantly from the C5 axis of the calix[5]arene. In the case of the host-guest complex of C₇₀ with the double-calix[5]arene, the molecular dynamics simulation of the host-guest complex represented the realistic movement of the bound C₇₀ inside the cavity. The combination of the molecular dynamics simulation and the chemical shift simulation of the host-guest complex suggested that the C₇₀ molecule rapidly moves inside the cavity.     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Complexation and extraction of non-ferrous metals by calix[n]arene phosphine oxides

The extraction of non-ferrous metal (M²⁺) nitrates by the calix[4,6]arenes (L), bearing four or six phosphine oxide donor groups at the upper or at the lower rim, was quantitatively described in the form of [M_n(NO₃)_2nL] (n = 1, 2) complexes. The extraction constants (Zn²⁺ > Cu²⁺ > Co²⁺ > Ni²⁺) for the both types of L coincide with Irving-Williams sequence. Calix[4]arenes, phosphorylated at the lower (narrow) rim, provide better stability of ML complexes because of the best spatial fitting of M²⁺ by the donor groups. For the upper (wide) rim phosphorylated calix[4]arenes M₂L and ML₂ complexes are more stable. Unusual zwitterionic [Co₂(NO₃)₄L] complex of the lower rim tetraphosphorylated calix[4]arene 1 was determined by X-ray structural analysis.     

Lower rim arylation of calix[n]arenes with extended perfluorinated domains

Exhaustive O-arylation of p-tert-butylcalix[n]arenes 2 (n = 4-8) with an excess of 3-pentadecafluoroheptyl-5-pentafluorophenyl-1,2,4-oxadiazole 3 and K₂CO₃ in refluxing acetonitrile provides an easy entry to a new family of perfluorinated calix[n]arenes 1. The cyclic tetramer furnishes a mixture of cone, partial cone, and 1,2-alternate conformers, while the larger macrocycles afford single products. The structures of all new compounds are substantiated by NMR techniques and MALDI-TOF mass spectral data. Single-crystal X-ray diffraction studies on the pentamer derivative 1b reveal a distorted cone-in conformation of the calixarene cup.