Spectrophotometric Determination of Gold in Water and Ore with 2‐Carboxyl‐1‐Naphthalthiorhodanine

Abstract

This paper reports on the synthesis of a new chromogenic reagent, 2‐carboxyl‐1‐naphthalthiorhodanine (CNTR). A high sensitive, selective, and rapid method for the determination of gold based on the rapid reaction of gold with CNTR and the solid phase extraction of the colored chelate with a reversed phase polymer‐based C₁₈ cartridge was developed. In the presence of 0.05–0.5 mol L^?1 of phosphoric acid solution and emulsifier‐OP medium, CNTR reacts with gold to form a red chelate of a molar ratio 1∶3 (gold to CNTR). This chelate was enriched by the solid phase extraction with a polymer‐based C₁₈ cartridge and the retained chelate was eluted from the cartridge with dimethyl formamide (DMF). The enrichment factor of 100 was achieved. In the DMF medium, the molar absorptivity of the chelate is 1.35×10⁵ L · mol^?1 · cm^?1 at 540 nm. Beer's law is obeyed in the range of 0.01～2 µg mL^?1 in the measured solution. The relative standard deviation for 11 replicates sample of 0.5 µg L^?1 level is 2.05%. The detection limit, based on three times the standard deviation is 0.02 µg L^?1 in the original sample. This method was applied to the determination of gold in water and ore with good results.     

Solid Phase Extraction and Spectrophotometric Determination of Mercury in Tobacco and Tobacco Additives with p-Sulfobenzylidenerhodanine as Chromogenic Reagent

A highly sensitive, selective and rapid method for the determination of mercury based on the reaction of mercury(II) with p-sulfobenzylidenerhodanine (SBDR) and the solid phase extraction of the colored chelate with a C₁₈ cartridge has been developed. In the presence of pH 3.8 acetate buffer solution and Tween-80 medium, SBDR reacts with mercury to form a red chelate of a molar ratio of 1:2 (mercury to SBDR). This chelate was enriched by solid phase extraction with a C₁₈ cartridge and eluted from the cartridge with ethanol (containing 5% acetic acid). The enrichment factor of 50 was achieved. In the ethanol medium, the molar absorptivity of the chelate is 1.28×10⁵L·mol^–1·cm^–1 at 545nm. Beers law is obeyed in the range of 0.011.2µgmL^–1 in the measured solution. The relative standard deviation for eleven replicate samples of 0.01µgmL^–1 level is 1.52%. This method can be applied to the determination of mercury in tobacco and tobacco additives with good results.     

2‐Aminocyclopentene‐1‐Dithiocarboxylic Acid‐Naphthalene Adsorbent for the Preconcentration and Determination of a Trace Copper in Real Samples by Spectrophotometric Method

A solid uncharged complex produced from 2‐aminocyclopentene‐1‐dithiocarboxylic acid (synthetic reagent) on naphthalene provides a very sensitive, selective and economical method for the preconcentration and determination of trace amounts of copper in drug and alloy samples. The 2‐aminocyclopentene‐1‐dithiocarboxylate of copper is retained quantitatively on microcrystalline naphthalene in the pH range 2.8–3.3. After filtration the solid mass consisting of copper complex‐naphthalene is dissolved with 4 mL of dimethylformamide (DMF). The absorbance is measured at 462 nm with a spectrophotometer against the reagent blank and molar absorptivity found to be 2.8 × 10⁵ liter mol^?1 cm^?1. Beer's law is obeyed over the concentration range of 0.1–16.0 μg of copper in 4 mL of the dimethylformamide solution. Detection limit is 3 ng mL^?1 [signal to noise ratio = 2]. Ten replicate determinations on a sample containing 1 μg of copper gave a relative standard deviation of 0.76%. The interference of a large number of anions and cations have been studied and the optimized conditions developed were utilized for determination of copper in various real samples.     

Simultaneous determination of four trace estrogens in feces,leachate, tap and groundwater using solid–liquid extraction/auto solid‐phase extraction and high‐performance liquid chromatography with fluorescence detection

A simple and selective high‐performance liquid chromatography method coupled with fluorescence detection was developed for the simultaneous measurement of trace levels of four estrogens (estrone, estradiol, estriol and 17α‐ethynyl estradiol) in environmental matrices. For feces samples, solid–liquid extraction was applied with a 1:1 v/v mixture of acetonitrile and ethyl acetate as the extraction solvent. For liquid samples (e.g., leachate and groundwater), hydrophobic/lipophilic balanced automated solid‐phase extraction disks were selected due to their high recoveries compared to conventional C₁₈ disks. Chromatographic separations were performed on a reversed‐phase C₁₈ column gradient‐eluted with a 45:55 v/v mixture of acetonitrile and water. The detection limits were down to 1.1 × 10^?2 (estrone), 4.11 × 10^?4 (estradiol), 5.2 × 10^?3 (estriol) and 7.18 × 10^?3 μg/L (17α‐ethynyl estradiol) at excitation/emission wavelengths of 288/310 nm, with recoveries in the range of 96.9 ± 3.2–105.4 ± 3.2% (n = 3). The method was successfully applied to determine estrogens in feces and water samples collected at livestock farms and a major river in Northeast China. We observed relatively high abundance and widespread distribution of all four estrogens in our sample collections, implying the urgency for a comprehensive and intricate investigation of estrogenic fate and contamination in our researched area.     

Analysis of Cembranoids in Flue‐cured Tobacco by Accelerated Solvent Extraction and Gas Chromatography‐Mass Spectrometry‐Selected Ion Monitoring

An efficient and sensitive analytical method based on accelerated solvent extraction (ASE) and gas chromatography‐mass spectrometry‐selected ion monitoring (GC‐MS‐SIM) was developed and validated for analysis of cembranoids in flue‐cured tobacco leaves. Extraction efficiency of different pretreatment methods including liquid‐solid extraction (LSE), ultrasound‐assisted extraction (UAE), Soxlet extraction and accelerated solvent extraction (ASE) was compared and ASE was chosen as the optimal extraction method. During ASE procedure, effect of four parameters on extraction efficiency was considered and the experimental conditions were selected as follows: extraction solvent: dichloromethane; oven temperature: 50 °C; static time: 5 min and number of cycles: 2. Working standards of cembranoids were isolated by silica gel column chromatography and the identification was performed by mass spectrometry. Performance characteristics such as linearity, limit of detection (LOD), limit of quantitation (LOQ), precision and recovery were studied. The LOD and LOQ values were ranging from 5.0 × 10^?3 to 6.9 × 10^?3 μg/mL and 1.7 × 10^?2 to 2.3 × 10^?2 μg/mL for all analytes. At three different spiked levels, recoveries for CBT‐ol, α‐CBT‐diol and β‐CBT‐diol were 94.6%‐105.1%, 93.0%‐97.2% and 88.7%‐107.5% while the relative standard deviations (RSDs) were in the ranges of 3.9%‐6.2%, 1.8%‐8.7% and 1.7%‐6.0%, respectively. The proposed analytical methodology was successfully applied in the analysis of cembranoids in tobacco samples.     

Comparison of C18 silica and multi‐walled carbon nanotubes as the adsorbents for the solid‐phase extraction of Chlorpyrifos and Phosalone in water samples using HPLC

A comparison between C₁₈ silica and multi‐walled carbon nanotubes (MWCNTs) in the extraction of Chlorpyrifos and Phosalone in environmental water samples was carried out using HPLC. Parameters affecting the extraction were type and volume of elution solvent, pH and flow rate of sample through the adsorbent. The optimum conditions obtained by C₁₈ cartridge for adsorption of these pesticides were 4 mL dichloromethane as elution solvent, sample pH of 5, flow rate of 1 mL/min, and those for MWCNT cartridge were 3 mL dichloromethane, pH of 5 and flow rate of 10 mL/min, respectively. Optimized mobile phase for separation and determination of these compounds by HPLC was methanol/water (80:20 v/v) with pH=5 (adjusted with phosphate buffer). Under optimal chromatographic and SPE conditions, LOD, linear range and precision (RSD n=8) were 3.03×10^?3, 0.01–5.00 μg/mL and 2.7% for Chlorpyrifos and 4.03×10^?4, 0.01–5.00 μg/mL and 2.3% for Phosalone, in C₁₈ cartridge, respectively. These values for MWCNT were 4.02×10^?6, 0.001–0.500 μg/mL and 1.8% for Chlorpyrifos and 1.02×10^?6, 0.001–0.500 μg/mL and 1.5% for Phosalone, respectively.     

Study on the Determination of Heavy-Metal Ions in Tobacco and Tobacco Additives by Microwave Digestion and HPLC with PAD Detection

A new method for the simultaneous determination of heavy-metal ions in tobacco and tobacco additive by microwave digestion and reversed-phase high-performance liquid chromatography (RP-HPLC) was developed. The tobacco and tobacco additive samples were digested by microwave digestion. The lead, cadmium, mercury, nickel, copper, and tin ions in the digested samples were precolumn derivated with tetra-(4-aminophenyl)-porphyrin (T₄-APP) to form color chelates; the Hg-T₄-APP, Cd-T₄-APP, Pb-T₄-APP, Ni-T₄-APP, Cu-T₄-APP, and Sn-T₄-APP chelates were then enriched by solid-phase extraction with C₁₈ disks and the retained chelates were eluted from the disks using tetrahydrofuran (THF). The chelates were separated on a Waters Xterra RP₁₈ column by gradient using methanol (containing 0.05 mol/L pyrrolidine-acetic acid buffer salt, pH 10.0) and acetone (containing 0.05 mol/L pyrrolidine-acetic acid buffer salt, pH 10.0) as a mobile phase at a flow rate of 0.5 mL/min and detected with a photodiode array detector in the range 350–600 nm. The detection limits of lead, cadmium, mercury, nickel, copper, and tin were 5, 4, 2.5, 5, 8, and 4 ng/L, respectively, in the original samples. The method was applied to the determination of lead, cadmium, mercury, nickel, copper, and tin in tobacco and tobacco additive with good results.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 5, 2005, pp. 542–548.Original English Text Copyright © 2005 by Yang, Li, Shi, Wang.This article was submitted by the authors in English.     

Study of the solid phase extraction and spectrophotometric determination of nickel using 5-(4′-chlorophenylazo)-6-hydroxypyrimidine-2,4-dione in environmental samples

A rapid, sensitive and selective method for the determination of nickel based on the rapid reaction of nickel(II) with 5-(4′-chlorophenylazo)-6-hydroxypyrimidine-2,4-dione (CPAHPD) and the solid phase extraction of the Ni(II)–CPAHPD complex with C18 membrane disks has been developed. In the presence of pH 6.8 buffer solution and cetylpyridinium bromide (CPB) medium, CPAHPD reacts with nickel to form a red complex of a molar ratio of 1:1 (nickel to CPAHPD). This complex was enriched by solid phase extraction (SPE) with C18 membrane disks. An enrichment factor of 100 was obtained by elution of the complex from the disks with the minimal amount of isopentyl alcohol. The molar absorptivity and Sandell sensitivity of the complex was 3.11 × 10⁵ L mol^?1 cm^?1 and 0.0189 ng cm^?2, respectively at 549 nm in the measured solution. Beer's law was obeyed in the range of 0.01–0.37 μg mL^?1, while that obtained by Ringbom plot was in the range of 0.025–0.35 μg mL^?1. The detection and quantification limits were calculated and found to be 0.003 and 0.01 μg mL^?1. The proposed method was applied to the determination of nickel in water, food, biological and soil samples with good results.     

Solid Phase Extraction and Spectrophotometric Determination of Silver with 2-(2-Quinolylazo)-5-Dimethylaminophenol

A new chromogenic reagent, 2-(2-quinolylazo)-5-Dimethylaminophenol (QADMAP) was synthesized, and a sensitive, selective, and rapid method was developed for the determination of the μg/L level of silver ions. The method is based on the rapid reaction of silver(I) with QADMAP and the solid phase extraction of the colored chelate using a C₁₈ cartridge. The QADMAP reacts with Ag(I) in the presence of a citric acid-sodium hydroxide buffer solution (pH 5.0) and a sodium dodecyl sulfonate (SDS) medium to form a violet chelate of molar ratio 1 : 2 (silver to QADMAP). This chelate was enriched by solid phase extraction with C₁₈ cartridge, and the retained chelate was eluted from the cartridge using ethanol (with 1% acetic acid). In the ethanol medium (with 1% acetic acid), the molar absorptivity of the chelate was 1.25 × 10⁵ L mol⁻¹ cm⁻¹ at 584 nm. Beer’s law was obeyed in the range 0.01–0.6 μg/mL. The relative standard deviation for eleven replicate samples of 0.01 μg/mL was 1.86%. The detection limit is 0.02 μg/L in the original samples. The method was applied to the determination of μg/L levels of silver ions in water with good results.__________From Zhurnal Analiticheskoi Khimii, Vol. 60, No. 6, 2005, pp. 566–570.Original English Text Copyright © 2005 by Huang, Yang, Hu, Yin.This article was submitted by the authors in English.     

Study on the Color Reaction of Silver with 2‐(2‐Quinolylazo)‐5‐Dimethylaminoaniline and its Application

A new chromogenic reagent, 2‐(2‐quinolylazo)‐5‐dimethylaminoaniline (QADMAA) was synthesized. A highly sensitive, selective and rapid method for the determination of silver based on the rapid reaction of silver(I) with QADMAA was developed. In the presence of pH = 6.5 sodium citrate‐sodium hydroxide buffer solution and sodium dodecyl sulfonate (SDS) medium, QADMAA reacts with silver to form a violet complex of a molar ratio 1:2 (silver to QADMAA). The molar absorptivity of the complex is 1.26 × 10⁵ L. mol^?1.cm^?1 at 570 nm. Beer's law is obeyed in the range of 0.01–0.6 μg/mL. The relative standard deviation for eleven replicate samples of 0.2 μg/mL silver is 1.76%. This method was applied to the determination of silver in water with good results.     

Study on the Interaction between a Novel Ionic Liquid Probe and Anionic Surfactants Using Resonance Light Scattering Spectra and Its Analytical Application

The interaction between anionic surfactants (AS) and 1‐hexadecyl‐3‐methylimidazolium bromide [C₁₆mim]Br was studied by using resonance light scattering (RLS) technique, UV‐Vis spectrophotometry and fluorometric methods. In Britton Robinson (BR) buffer (pH 6.0), [C₁₆mim]Br reacted with AS to form supermolecular complex which resulted in enhancement in RLS intensity. Their maximum RLS wavelengths were all at 390 nm. Some important interacting experimental variables, such as the solution acidity, [C₁₆mim]Br concentration, salt effect and addition order of the reagents, were investigated and optimized. Under the optimum conditions, quantitative determination ranges were 0.001–7 μg·mL^?1 for dodecyl sodium sulfate (SDS), 0.001–6 μg·mL^?1 for sodium dodecylbenzene sulfonate (SDBS) and 0.005–7 μg·mL^?1 for sodium lauryl sulfonate (SLS), respectively, while the detection limits were 1.3 ng·mL^?1 for SDS, 1.0 ng·mL^?1 for SDBS and 5.1 ng·mL^?1 for SLS, respectively. Based on the ion‐association reaction, a highly sensitive, simple and rapid method has been established for the determination of AS.     

Determination of neonicotinoid insecticides in environmental samples by micellar electrokinetic chromatography using solid‐phase treatments

A sensitive and reliable method based on MEKC has been developed and validated for trace determination of neonicotinoid insecticides (thiamethoxam, acetamiprid, and imidacloprid) and the metabolite 6‐chloronicotinic acid in water and soil matrices. Optimum separation of the neonicotinoid insecticides was obtained on a 58 cm long capillary (75 μm id) using as the running electrolyte 40 mM SDS, 5 mM borate (pH 10.4), and 5% (v/v) methanol at a temperature of 25°C, a voltage of 25 kV and with hydrodynamic injection (10 s). The analysis time was less than 7 min. Prior to MEKC determination, the samples were purified and enriched by carrying out extraction‐preconcentration steps. For aqueous samples, off‐line SPE with a sorptive material such as Strata‐X (polymeric hydrophobic sorbent) and octadecylsilane (C₁₈) was carried out to clean up and preconcentrate the insecticides. However, for soil samples, matrix solid‐phase dispersion (MSPD) was applied with C₁₈ used as the dispersant. Good linearity, accuracy, and precision were obtained and the detection limits were in the range between 0.01 and 0.07 μg mL^?1 for river water and 0.17 and 0.37 μg g^?1 for soil samples. Recovery levels reached greater than 92% for all of the assayed neonicotinoids in river water samples with Strata‐X. In soil matrices, the best recoveries (63–99%) were obtained with MSPD.     

Simple and Sensitive Extractive Spectrophotometeric Method for the Assay of Mebeverine Hydrochloride in Pure and Pharmaceutical Formulations

Simple, sensitive, rapid and cost effective extraction spectrophotometric methods are described for the assay of mebeverine hydrochloride (MBH) in bulk samples and pharmaceutical formulations. These two methods (Bromophenol blue and Erichrome Black‐T) are based on the formation of chloroform soluble ion‐pair complexes of MBH with Bromophenol blue (BPB) and with Erichrome Black‐T (EBT), to form yellow and pink colored chromogen in a Glycine‐HCl buffer of pH 2.4 (BPB) and in a KCl‐HCl buffer of pH 1.4 (EBT) with absorbance maximum at 416 nm and at 524 nm for BPB and EBT respectively. The calibration graph is found to linear over 0.2–20 μg/mL (BPB) and 0.2–20 μg/mL (EBT), with molar absorptivity values of 1.8295 × 10⁴ 1 moL^?1 cm^?1 and 1.5896 × 10⁴ 1 moL^?1 cm^?1, respectively. The LOD (Limit of Detection) were found to be 0.090 μg/mL and 0.084 μg/mL and LOQ (Limit of Quantification) were 0.2997 μg/mL and 0.2730 μg/mL for the BPB and EBT method, respectively. The results of analysis for the two methods have been validated statistically and by recovery studies. The results are compared with those obtained with reported method. The proposed methods are simple, sensitive, accurate and suitable for quality control applications.     

Determination of Doxepin in human plasma using cloud‐point extraction with high‐performance liquid chromatography and ultraviolet detection

A new straightforward method based on cloud‐point extraction has been developed, optimized, and validated for the determination of doxepin in human plasma by high‐performance liquid chromatography separation and UV detection. The nonionic surfactant Triton X‐114 was chosen as the extraction solvent. Chromatography separation was performed on a μBondapak^R C₁₈ column (4.6 mm id × 300 mm, 3 μm particle size), which was used for isocratic elution at a detection wavelength of 289 nm. Under the optimum conditions, the linear range of doxepin in human plasma was 0.1–0.9 μg/mL. Also, the detection limit, preconcentration factor, and enrichment factor were 0.08 μg/mL, 50, and 49.0, respectively.     

Optimization of dispersive liquid–liquid microextraction with central composite design for preconcentration of chlordiazepoxide drug and its determination by HPLC‐UV

A simple, rapid, and sensitive method based on dispersive liquid–liquid microextraction combined with HPLC‐UV detection applied for the quantification of chlordiazepoxide in some real samples. The effect of different extraction conditions on the extraction efficiency of the chlordiazepoxide drug was investigated and optimized using central composite design as a conventional efficient tool. Optimum extraction condition values of variables were set as 210 μL chloroform, 1.8 mL methanol, 1.0 min extraction time, 5.0 min centrifugation at 5000 rpm min^?1, neutral pH, 7.0% w/v NaCl. The separation was reached in less than 8.0 min using a C₁₈ column using isocratic binary mobile phase (acetonitrile/water (60:40, v/v)) with flow rate of 1.0 mL min^?1. The linear response (r² > 0.998) was achieved in the range of 0.005–10 μg mL^?1 with detection limit 0.0005 μg mL^?1. The applicability of this method for simultaneous extraction and determination of chlordiazepoxide in four different matrices (water, urine, plasma, and chlordiazepoxide tablet) were investigated using standard addition method. Average recoveries at two spiking levels were over the range of 91.3–102.5% with RSD < 5.0% (n = 3). The obtained results show that dispersive liquid–liquid microextraction combined with HPLC‐UV is a fast and simple method for the determination of chlordiazepoxide in real samples.     

Pre‐concentration of trace amount of bisphenol A in water samples by palm leaf ash and determination with high‐performance liquid chromatography

Palm leaf ash was characterized and used as low‐cost adsorbent for solid‐phase extraction and preconcentration of bisphenol A (BPA) in real water samples. Analysis of BPA was carried out using HPLC involving Eurospher 100–5‐C₁₈ (25 cm × 4.5 mm, particle size 5 μm) column and water–acetonitrile (40:60, v/v) as mobile phase. The adsorption was achieved quantitatively at a pH of 6 with elution by 3 mL acetonitrile. The limits of detection and enrichment factor were 0.02 μg L^?1 and 333, respectively. Under optimum conditions the relative standard deviation (RSD) was 2% (n = 10). Comparison of qualification criteria of presented preconcentration procedure with other research indicated that palm leaf ash adsorbent was better than many of the adsorbents in terms of cost and reusability. Also, the limit of detection, precision and enrichment factor were comparable and even better than the previously reported methods. Finally, the efficiency of method was computed by determination of trace amounts of BPA in sea, river, mineral and tap waters with recoveries of 93.3–105.5% and RSDs of 0.61–3.12%.. Briefly, the developed solid‐phase extraction and Preparative layer chromatography (PLC) methods may be used for bisphenol A monitoring in any environmental water sample. Copyright © 2016 John Wiley & Sons, Ltd.     

Comparison of LC‐UV and LC–MS methods for simultaneous determination of teriflunomide,dimethyl fumarate and fampridine in human plasma: application to rat pharmacokinetic study

This study describes a comparison between LC‐UV and LC–MS method for the simultaneous analyses of a few disease‐modifying agents of multiple sclerosis. Quantitative determination of fampridine (FAM), teriflunomide (TFM) and dimethyl fumarate (DMF) was performed in human plasma with the recovery values in the range of 85–115%. A reversed‐phase high‐performance liquid chromatography (HPLC) with UV as well as MS detection is used. The method utilizes an XBridge C₁₈ silica column and a gradient elution with mobile phase consisting of ammonium formate and acetonitrile at a flow rate of 0.5 mL min^?1. The method adequately resolves FAM, TFM and DMF within a run time of 15 min. Owing to low molecular weights, the estimation of DMF and FAM is more versatile in UV than MS detection. With LC‐UV, the detection limits of FAM, TFM and DMF were 0.1, 0.05, 0.05 μg and the quantification limit for all the analytes was 1 μg. With LC–MS, the detection and quantification limits for all of the analytes were 1 and 5 ng, respectively. The two techniques were completely validated and shown to be reproducible and sensitive. They were applied to a pharmacokinetic study in rats by a single oral dose. Copyright © 2016 John Wiley & Sons, Ltd.     

Dispersive liquid–liquid microextraction based on solidification of floating organic drop combined with field‐amplified sample injection in capillary electrophoresis for the determination of beta(2)‐agonists in bovine urine

Dispersive liquid–liquid microextraction based on solidification of floating organic drop (DLLME–SFO) was for the first time combined with field‐amplified sample injection (FASI) in CE to determine four β₂‐agonists (cimbuterol, clenbuterol, mabuterol, and mapenterol) in bovine urine. Optimum BGE consisted of 20 mM borate buffer and 0.1 mM SDS. Using salting‐out extraction, β₂‐agonists were extracted into ACN that was then used as the disperser solvent in DLLME–SFO. Optimum DLLME–SFO conditions were: 1.0 mL ACN, 50 μL 1‐undecanol (extraction solvent), total extraction time 1.5 min, no salt addition. Back extraction into an aqueous solution (pH 2.0) facilitated direct injection of β₂‐agonists into CE. Compared to conventional CZE, DLLME–SFO–FASI–CE achieved sensitivity enhancement factors of 41–1046 resulting in LODs in the range of 1.80–37.0 μg L^?1. Linear dynamic ranges of 0.15–10.0 mg L^?1 for cimbuterol and 15–1000 μg L^?1 for the other analytes were obtained with coefficients of determination (R²) ≥ 0.9901 and RSD% ≤5.5 (n = 5). Finally, the applicability of the proposed method was successfully confirmed by determination of the four β₂‐agonists in spiked bovine urine samples and accuracy higher than 96.0% was obtained.     

Simultaneous Determination of Tin,Nickel, Lead,Cadmium and Mercury in Tobacco and Tobacco Additives by Microwave Digestion and RP‐HPLC Followed by On‐Line Column Enrichment

A new method for the simultaneous determination of five heavy metal ions, tin, nickel, lead, cadmium and mercury ions as metal‐tetra‐(2‐aminophenyl)‐porphyrin (T₂APP) chelates was developed using reversed‐phase high performance liquid chromatography (RP‐HPLC) equipped with a photodiode array detector and combined with an on‐line enrichment technique. The tin, nickel, lead, cadmium and mercury ions were pre‐column derivatized with T₂APP to form color chelates. The Sn‐T₂APP, Ni‐T₂APP, Hg‐T₂APP, Cd‐T₂‐APP and Pb‐T₂APP chelates can be absorbed onto the front of the enrichment column when they are injected into the injector and sent to the enrichment column [Waters Xterra? RP₁₈(5μ, 3.9 × 20 mm)] with a buffer solution of 0.05 mol/L pyrrolidine‐acetic acid (pH = 10.0) as mobile phase. After the enrichment had finished, by switching the six‐port switching valves, the retained chelates were back‐flushed by mobile phase and traveling towards the analytical column. These chelates separation on the analytical column [Waters Xterra? RP₁₈ (5μ, 3.9 × 150 mm)] was satisfactory by gradient elution with methanol (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) and acetone (containing 0.05 mol/L pyrrolidine‐acetic acid buffer salt, pH = 10.0) as mobile phase. The linearity range is 0.01?120 μg/L for each metal ion. The detection limits (S/N = 3) of tin, nickel, lead, cadmium and mercury are 4.0 ng/L, 3.5 ng/L, 2.5 ng/L, 3.0 ng/L and 3.0 ng/L, respectively. This method was applied to the determination of tin, nickel, lead, cadmium and mercury ions in tobacco and tobacco additives with good results.     

Voltammetric Determination of Trace Amounts of 2‐Methyl‐4,6‐Dinitrophenol at a Silver Solid Amalgam Electrode

The voltammetric behavior of 2‐methyl‐4,6‐dinitrophenol was investigated by differential pulse voltammetry (DPV) at a nontoxic mercury meniscus‐modified silver solid amalgam electrode (m‐AgSAE). Conditions have been found for its determination by DPV at m‐AgSAE in the concentration range of 0.2 to 1 μmol L^?1.