Molten Ag2SO4‐based Ion‐Exchange Preparation of Ag0.5La0.5TiO3 for Photocatalytic O2 Evolution

Ag_0.5La_0.5TiO₃ with an ABO₃ perovskite structure was synthesized by a newly developed ion‐exchange method. Molten Ag₂SO₄ instead of traditional molten AgNO₃ was used as Ag⁺ source in view of its high decomposition temperature (1052 °C), thereby guaranteeing the complete substitution of Ag⁺ for Na⁺ in Na_0.5La_0.5TiO₃ with a stable ABO₃ perovskite structure at a high ion‐exchange temperature (700 °C). Under full‐arc irradiation, the O₂‐evolution activity of Ag_0.5La_0.5TiO₃ was about 1.6 times that of Na_0.5La_0.5TiO₃ due to the optimized electronic band structures and local lattice structures. On the one hand, the substitution of Ag⁺ for Na⁺ elevated the VBM and thus narrowed the band gap from 3.19 to 2.83 eV, thereby extending the light‐response range and, accordingly, enhancing the photoexcitation to generate more charge carriers. On the other hand, the substitution of Ag⁺ for Na⁺ induced a lattice distortion of the ABO₃ perovskite structure, thereby promoting the separation and migration of charge carriers. Moreover, under visible‐light irradiation, Ag_0.5La_0.5TiO₃ displayed notable O₂ evolution whereas Na_0.5La_0.5TiO₃ showed little O₂ evolution, thus demonstrating that the substitution of Ag⁺ for Na⁺ enabled the use of visible light to evolve O₂ photocatalytically. This work presents an effective route to explore novel Ag‐based photocatalysts.     

Synthesis,Characterization and Photocatalytic Activity of Ag+‐ and Sn2+‐Doped KTi0.5Te1.5O6

In this study, the photocatalytic dye degradation efficiency of KTi_0.5Te_1.5O₆ synthesized through solid‐state method was enhanced by cation (Ag⁺/Sn⁺²) doping at potassium site via ion exchange method. As prepared materials were characterized by XRD, SEM‐EDS, IR, TGA and UV–Vis Diffuse reflectance spectroscopic (DRS) techniques. All the compounds were crystallized in cubic lattice with space group. The bandgap energies of parent, Ag⁺‐ and Sn⁺²‐doped KTi_0.5Te_1.5O₆ materials obtained from DRS profiles were found to be 2.96, 2.55 and 2.40 eV, respectively. Photocatalytic efficiency of parent, Ag⁺‐ and Sn⁺²‐doped materials was evaluated against the degradation of methylene blue (MB) and methyl violet (MV) dyes under visible light irradiation. The Sn⁺²‐doped KTi_0.5Te_1.5O₆ showed higher activity toward the degradation of both MB and MV dyes and its higher activity is ascribed to the lower bandgap energy compared to the parent and Ag⁺‐doped KTi_0.5Te_1.5O₆. The mechanistic degradation pathway of methylene blue (MB) was studied in the presence of Sn²⁺‐doped KTi_0.5Te_1.5O₆. Quenching experiments were performed to know the participation of holes, super oxide and hydroxyl radicals in the dye degradation process. The stability and reusability of the catalysts were studied.     

Effect of Cation/Anion Co‐doping on the Photocatalytic Performance of Na3SbO(PO4)2

Silver/copper‐nitrogen co‐doped Na₃SbO(PO₄)₂ were prepared by solid state/ion exchange methods. The materials were characterized by powder XRD, SEM‐EDS, TG analysis, as well as FT‐IR and UV/Vis diffuse reflectance spectroscopy. All the doped materials crystallize in orthorhombic lattice with space group P2₁2₁2₁. The infrared spectra of the samples gave characteristic bands corresponding to PO₄ and SbO₆ groups. The bandgap energy of all the samples was deduced from their UV/Vis DRS profiles. The bandgap energy of doped materials decreased substantially. Visible‐light‐induced photocatalytic oxidation of the methyl violet (MV) and methylene blue (MB) was examined. The influence of cation, anion, and co‐doping on the photoactivity of Na₃SbO(PO₄)₂ was studied. The Ag⁺ and nitrogen co‐doped Na₃SbO(PO₄)₂ exhibited the highest photocatalytic activity among the materials investigated.     

RE/TiO2光催化剂的谱学特性与气相光催化性能的研究

采用改进的sol-gel法和浸渍法制备了TiO₂掺杂稀土离子La³⁺、Y³⁺、Gd³⁺、Er³⁺、Nd³⁺、Pr³⁺的RE/TiO₂光催化剂,运用FTIR、XRD、TEM、低温氮吸附/脱附、TG/DTA、UV-Vis DRS、表面光电压谱(SPS)等进行表征,以气相光催化降解乙烯、溴代甲烷作为探针反应,阐明了RE/TiO₂光催化剂的谱学特性与气相光催化性能的关系。结果显示,稀土离子掺杂后,TiO₂的锐钛矿含量增加,比表面积增大,粒径变小,吸收边发生蓝移,表面光电压的响应阈值增大,此外,Pr³⁺除外的其它稀土离子掺杂的TiO₂的表面光电压信号增强;光催化降解实验表明,与纯TiO₂相比,La³⁺、Y³⁺、Gd³⁺、Er³⁺、Nd³⁺掺杂TiO₂样品上乙烯、溴代甲烷的光催化活性均有不同程度的增强,而且表现出较强的矿化能力。但是,掺杂Pr³⁺的TiO₂的光催化性能降低恰好对应较弱的表面光电压信号。所以,本文认为提高光生电子-空穴对的分离效率是改善光催化性能的关键因素。     

Synthesis and Studies of the Visible‐Light Photocatalytic Properties of Near‐Monodisperse Bi‐Doped TiO2 Nanospheres

Near‐monodisperse Bi‐doped anatase TiO₂ nanospheres with almost uniform diameters in the range of 117 to 87 nm were prepared simply by introducing different amounts of bismuth nitrate pentahydrate into the reaction system and subsequent calcinations. X‐ray diffraction, UV‐visible diffuse reflectance spectra, and X‐ray photoelectron spectroscopy confirm that the doped ions substitute some of the lattice titanium atoms, and furthermore, Bi³⁺ and Bi⁴⁺ ions coexist. All the Bi‐doped TiO₂ samples show much better photocatalytic activity than pure TiO₂ in the degradation of rhodamine B (RhB) under the irradiation of visible light (λ>420 nm), and, interestingly, it was found that the degradation mechanism is different from the conventional one, which has already been reported elsewhere. The detailed mechanism is discussed in this article.     

Synthesis of Bi-doped TiO2 Nanotubes and Enhanced Photocatalytic Activity for Hydrogen Evolution from Glycerol Solution

Bi‐doped TiO₂ nanotubes with variable Bi/Ti ratios were synthesized by hydrothermal treatment in 10 mol·L^?1 NaOH (aq.) through using Bi‐doped TiO₂ particles derived from conventional sol‐gel method as starting materials. The effects of Bi content on the morphology, textural properties, photo absorption and photocatalytic activity of TiO₂ nanotubes were investigated. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS) observations of the obtained samples revealed the formation of titanate nanotube structure doped with Bi, which exists as a higher oxidation state than Bi³⁺. Bi‐doping TiO₂ nanotubes exhibited an extension of light absorption into the visible region and improved photocatalytic activities for hydrogen production from a glycerol/water mixed solution as compared with pure TiO₂ nanotubes. There was an optimal Bi‐doped content for the photocatalytic hydrogen production, and high content of Bi would retard the phase transition of titanate to anatase and result in morphology change from nanotube to nanobelt, which in turn decreases the photocatlytic activity for hydrogen evolution.     

稀土离子Tm3+掺杂Bi2WO6的可见光催化性能

以Na₂WO₄·2H₂O和Bi（NO₃）₃·5H₂O为主要原料,采用水热法合成了稀土离子Tm³⁺掺杂的Bi₂WO₆光催化剂。采用XRD、SEM、TEM、Raman、PL、DRS研究了Tm³⁺掺杂Bi₂WO₆的物相,微观形貌和可见光催化性能。结果表明,Tm³⁺掺杂有效提高了Bi₂WO₆的光催化性能,当掺杂量为6%时,样品的光催化性能最好,可见光照射30 min后,对罗丹明B的降解效率达到91.27%,而可见光照射5 h后,对焦糖色素的降解效率达45.25%。与未掺杂Bi₂WO₆相比,分别提高了27.78%和35.22%。     

Sulfur and Ti3+ co‐Doping of TiO2 Nanotubes Enhance Photocatalytic H2 Evolution Without the Use of Any co‐catalyst

TiO₂ nanotubes were successfully co‐doped with sulfur and Ti³⁺ states using a facile annealing treatment in H₂/H₂S gas mixture. The obtained nanotubes were investigated for their photocatalytic performance and characterized by SEM, XRD, XPS, EPR, IPCE, IMPS and Mott‐Schottky measurements. The synthesized co‐doped TiO₂ nanotubes show an enhanced photocatalytic hydrogen production rate compared to tubes that were treated only in pure H₂ or H₂S atmosphere—this without the presence of any co‐catalyst. It was found that sulfur in co‐doped TiO₂ exists in the form of S^2? and a small quantity of S⁴⁺/S⁶⁺, which leads to a narrowing of the band gap. However, the enhanced absorption of light in the visible range is not the key reason for the improved photocatalytic performance. We ascribe the enhanced photocatalytic activity to a synergetic effect of S mid‐gap states and disordered Ti³⁺ defects that facilitate photo generated electron transfer.     

Structural and optical properties of (Y3+, Tb3+)-codoped sodium bismuth titanate nanoparticles

The present study investigates the effect of (yttrium, terbium) ions codoping on structural and optical properties of sodium bismuth titanate (Na_0.5Bi_0.5TiO₃ or NBT) with the possible practical application as a multi-luminescence material in optoelectronic devices such as light-emitting diodes. The polycrystalline samples of Na_0.5(Y/Tb_xBi_1-x)_0.5TiO₃ (x = 0.00, 0.04, 0.06, and 0.08) were synthesized using solid-state reaction (mixed oxide) technique. Stoichiometric amounts of metal compounds (Na₂CO₃, Y₂O₃, Tb₄O₇, Bi₂O₃, and TiO₂) were mixed via ball milling at 250 rpm for 2 h, and the ground powders were calcined at 700 °C for 2 h. The powders were pressed under uniaxial pressure of 6.87 MPa to obtain green pellets, which were later sintered at 1,000 °C for 2 h to obtain the Na_0.5(Y/Tb_xBi_1-x)_0.5TiO₃ samples. X-ray diffraction analysis suggests that the perovskite phase is established for all (Y³⁺, Tb³⁺)-codoped NBT compositions (x = 0.00–0.08). The presence of NBT functional groups was confirmed by Fourier transform infrared spectroscopy. Raman spectra indicate that (Y³⁺, Tb³⁺) ions induce minor changes to the crystal lattice structure, with no disturbance to the long-range order. X-ray photoelectron spectroscopy results reveal the presence of all the constituent elements in the NBT samples. Scanning electron microscopy confirms the polycrystalline nature of the samples with uniform distribution of multifacetted or nearly spherical grain structures. Transmission electron microscopy and selected area electron diffraction (SAED) images show the presence of nanocrystals in the samples. Ultraviolet diffuse reflectance spectroscopy (UV-DRS) and photoluminescence results illustrate that Na_0.5(Y/Tb_xBi_1-x)_0.5TiO₃ possess wider optical energy band gap (E_g = 3.23–3.27 eV) with promising luminescence applications in the optoelectronic industry.     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO₂纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi₂MoO₆/TiO₂复合纳米纤维。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）、透射电镜（TEM）、紫外-可见漫反射光谱（UV-Vis DRS）以及荧光光谱（PL）等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明：在稀土掺杂样品中,Ce离子进入Bi₂MoO₆晶格,部分取代Bi³⁺,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO₂复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO₂纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

Samarium and Nitrogen Co‐Doped Bi2WO6 Photocatalysts: Synergistic Effect of Sm3+/Sm2+ Redox Centers and N‐Doped Level for Enhancing Visible‐Light Photocatalytic Activity

Samarium and nitrogen co‐doped Bi₂WO₆ nanosheets were successfully synthesized by using a hydrothermal method. The crystal structures, morphology, elemental compositions, and optical properties of the prepared samples were investigated. The incorporation of samarium and nitrogen ions into Bi₂WO₆ was proved by X‐ray diffraction, energy dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy. UV/Vis diffuse reflectance spectroscopy indicated that the samarium and nitrogen co‐doped Bi₂WO₆ possessed strong visible‐light absorption. Remarkably, the samarium and nitrogen co‐doped Bi₂WO₆ exhibited higher photocatalytic activity than single‐doped and pure Bi₂WO₆ under visible‐light irradiation. Radical trapping experiments indicated that holes (h⁺) and superoxide radicals ( ^. O₂^?) were the main active species. The results of photoluminescence spectroscopy and photocurrent measurements demonstrated that the recombination rate of the photogenerated electrons and holes pairs was greatly depressed. The enhanced activity was attributed to the synergistic effect of the in‐built Sm³⁺/Sm²⁺ redox pair centers and the N‐doped level. The mechanism of the excellent photocatalytic activity of Sm‐N‐Bi₂WO₆ is also discussed.     

Cation Effect on Formation of Preyssler‐type 30‐Tungsto‐5‐phosphate: Enhanced Yield of Na‐encapsulated Derivative and Direct Synthesis of Ca‐ and Bi‐Encapsulated Derivatives

The effect of cations in a reaction mixture for the preparation of the Preyssler‐Jeannin‐Pope type 30‐tungsto‐5‐phosphate [P₅W₃₀O₁₁₀Na]^14– is investigated. Reaction of phosphate and tungstate with a P/W ratio of ca. 3.9 in an acidic aqueous solution without cations selectively leads to the Dawson‐type 18‐tungsto‐2‐phosphate, [P₂W₁₈O₆₂]^6–. Amongst all the alkali cations, only Na⁺ allows formation of the Preyssler‐type polyanion [P₅W₃₀O₁₁₀Na]^14–, with an encapsulated Na⁺ ion, and the product yield can be improved by increasing Na⁺ amount. The presence of Li⁺ ions instead results in the Dawson‐type polyanion [P₂W₁₈O₆₂]^6–, whereas K⁺, Rb⁺, and Cs⁺ selectively result in the Keggin‐type polyanion [PW₁₂O₄₀]^3–. An improved synthetic procedure for the Na⁺‐encapsulated Preyssler‐ion leading to a higher isolated yield is presented. Furthermore, addition of Ca²⁺ and Bi³⁺ compounds allows formation of the Ca²⁺‐ and Bi³⁺‐encapsulated Preyssler‐type polyanions, [P₅W₃₀O₁₁₀Ca]^13– and [P₅W₃₀O₁₁₀Bi]^12–, respectively. Furthermore, single‐crystal XRD structure of the Bi³⁺‐encapsulated Preyssler‐type polyanions, [P₅W₃₀O₁₁₀Bi]^12–, is presented for the first time.     

Microstructures and photocatalytic properties of Ag and La surface codoped TiO2 films prepared by sol–gel method

Ag⁺ and La³⁺ surface codoped TiO₂ films were successfully prepared by the improved sol–gel and doping processes. The as-prepared specimens were characterized using differential thermal analysis-thermogravimetry (DTA–TG), X-ray diffraction (XRD), high-resolution field emission scanning electron microscopy (FE-SEM), X-ray energy dispersive spectroscopy (EDS), Brunauer–Emmett–Teller (BET) surface area, Photoluminescence spectrum (PL) and UV–vis diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of an organic dye in aqueous solution. The results of XRD, FE-SEM and BET analyses indicated that the TiO₂ films were composed of nano-particles or aggregates with a size of less than 10 nm. With the codoping of Ag⁺ and La³⁺, TiO₂ films with high photocatalytic activity and clearly responsive to the visible light were obtained. The improvement mechanism by ions doping was also discussed.     

Hydrothermal ethanol conversion on Ag,Cu, Au/TiO2

The effect UV irradiation and silver, copper, and gold ions (M ^z+) supported on titania (anatase) have on the activity of M/TiO₂ samples in ethanol conversion at 150–400°C is examined. After UV irradiation, the yields of acetaldehyde and ethylene increase for TiO₂ and Ag/TiO₂ samples, while the activity of Cu²⁺/TiO₂ decreases. The activation energy of ethanol dehydration declines in the order TiO₂ > Au³⁺ > Cu²⁺ > Ag⁺ and correlates linearly with a reduction in the radius of M ^z+ in crystal. The number of acidic sites on a M/TiO₂ surface titrated via pyridine adsorption grows upon the introduction of M. Unlike Cu²⁺/TiO₂, these sites are not activated after the irradiation of TiO₂, Ag⁺/TiO₂, and Au³⁺/TiO₂. According to IR spectral data on adsorbed pyridine, all samples contain Lewis and Brönsted acidic sites.     

Investigation of photocatalytic activity of metal-doped TiO2 nanoparticles prepared by Pechini method

M-doped TiO₂ (M = Ag²⁺, Al³⁺, Ce⁴⁺, Nb⁵⁺) with different dopant contents have been prepared by the Pechini method using titanium IV isopropoxide as precursor. The effect of doping concentration on the photocatalytic activity for methyl orange (MO) photodegradation was investigated using UV radiation. The photocatalysts were characterized by surface area, X-ray diffraction and UV–Vis diffuse reflectance spectroscopy. An increase in the photoactivity of TiO₂ nanoparticles was confirmed by MO photocatalytic degradation experiments, when the transition metal ions were incorporated into the semiconductor crystalline lattice, which could be attributed to an increase in the charge separation and reduction of e^?/h⁺ recombination as a function of the substitutional defect generated at very low levels.     

Bi3.25Sm0.75Ti3O12纳米线的水热合成及可见光催化性能

用一步水热法制备了直径约为40 nm的Bi3.25Sm0.75Ti3O12(BSmT)纳米线。BSmT纳米线为层状钙钛矿结构。紫外可见漫反射光谱表明,制备出的BSmT材料的带隙能约为2.67 eV。催化反应结果表明,BSmT的光催化活性比掺氮TiO2(N-TiO2)和纯相钛酸铋(Bi4Ti3O12,BIT)高得多,经可见光照射360 min,浓度为0.01 mmol.L-1甲基橙溶液的降解率可达到92.0%。BSmT光催化剂具有更高催化活性的原因是Sm3+离子掺杂拓展了BIT对可见光的吸收范围,同时抑制了BIT的光生电子-空穴的复合。并且BSmT光催化剂经循环使用4次后,其光催化活性并没有明显降低,表明BSmT是一种稳定有效的可见光催化剂。     

Are cluster ion analysis beams good choices for hydrogen depth profiling using time‐of‐flight secondary ion mass spectrometry?

For more than three decades, time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) has been used for elemental depth profiling. In recent years, cluster primary ion sources (principally, C₆₀⁺, Bi_n⁺, and Au_n⁺) have become widely available, and they can greatly enhance the signal intensity of molecular ions (10–1000 times). Understanding the performance of cluster ion analysis beams used in elemental depth profiling can greatly assist normal ToF‐SIMS users in choosing the optimal analysis beam for depth profiling work. Presently, however, the experimental data are lacking, and such choices are difficult to make. In this paper, hydrogen and deuterium depth profiling were studied using six different analysis beams—25 keV Bi⁺, Bi₃⁺, Bi₅⁺, 50 keV Bi₃²⁺, 10 keV C₆₀⁺, and 20 keV C₆₀²⁺. The effort shows that cluster primary ions do enhance H^? and D^? yields, but the enhancement is only about 1.5–4.0 times when compared to atomic Bi⁺ ions. Because the currents of atomic ion analysis beams are much stronger than the currents of cluster ion analysis beams for most commercial ToF‐SIMS instruments, the atomic ion analysis beams can provide the strongest H^? and D^? signal intensities, and may be the best choices for hydrogen and deuterium depth profiling. In addition, two representative nuclides, ³⁰Si and ¹⁸O, were also studied and yielded results similar to those of H^? and D^?. Copyright © 2011 John Wiley & Sons, Ltd.     

Characterization of [peptide+(Ag)n]+ complexes using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Silver ion complexes of peptides [M + (Ag)_n]⁺, M = angiotensin I or substance P where n = 1–8 and 17–23 for angiotensin I and n = 1–5 for substance P, are identified and characterized using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOFMS). The Ag⁺ coordination number exceeds the number of available amino acid residues in angiotensin I whereas the number of observed complexes in substance P is less than the number of amino acid residues in it. The larger coordination number of angiotensin I with Ag⁺ indicates the simultaneous binding of several Ag⁺ ions to the amino acid residue present in it. The lower number of observed complexes in substance P suggests the binding of two or more residues to one Ag⁺ ion. The presence of trifluoroacetic acid in the peptide samples reduces the Ag⁺ coordination ability in both the peptides which indicates that the basic residues in it are already protonated and do not participate in the Ag⁺‐binding process. The Ag⁺ ion also forms a complex with the α‐cyano‐4‐hydroxycinnamic acid (CHCA) matrix and is observed in the MALDI mass spectra and the formation of [CHCA + Ag]⁺, [CHCA + AgNO₃]⁺ and [(CHCA)₂ + Ag]⁺ ions is due to the high binding affinity of Ag⁺ to the CN group of CHCA. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Study of Plasmon‐Induced Carrier Behavior at Ag/TiO2 Nanowires

Nanocomposites of Ag/TiO₂ nanowires with enhanced photoelectrochemical performance have been prepared by a facile solvothermal synthesis of TiO₂ nanowires and subsequent photoreduction of Ag⁺ ions to Ag nanoparticles (AgNPs) on the TiO₂ nanowires. The as‐prepared nanocomposites exhibited significantly improved cathodic photocurrent responses under visible‐light illumination, which is attributed to the local electric field enhancement of plasmon resonance effect near the TiO₂ surface rather than by the direct transfer of charge between the two materials. The visible‐light‐driven photocatalytic performance of these nanocomposites in the degradation of methylene blue dye was also studied, and the observed improvement in photocatalytic activity is associated with the extended light absorption range and efficient charge separation due to surface plasmon resonance effect of AgNPs.