Synthesis,Structure, and Optical Properties of New Cadmium Chalcogenide Clusters of the Type [Cd10E4(E'Ph)12(PR3)4], (E,E' = Te,Se, S)

New cadmium chalcogenide cluster molecules [Cd₁₀E₄(E'Ph)₁₂(PⁿPr₃)₄], E = Te, E' = Te ( 1 ) and [Cd₁₀E₄(E'Ph)₁₂ (PⁿPr₂Ph)₄] E = Te, E' = Se ( 2 ); E = Te E' = S ( 3 ); E = Se, E' = S ( 4 ) have been synthesized and structurally characterized by single crystal X‐ray structure analysis. The influence of the variation of the chalcogen atom is investigated by structural means and by optical spectroscopy. All cluster‐molecules have a broad emission in the blue‐visible range at low temperature as indicated by photo luminescence (PL) measurements. A clear classification of the emission peak position can be made based on the E' species suggesting that the emission is assigned to transitions associated with the cluster surface ligands. Photoluminescence excitation and absorption measurements display a systematic shift of the band gap to the higher energies with the variation of E and E' from Te to Se to S, as also occurs in the respective series of the bulk semiconductors.     

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

Silica-PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1-5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), ¹³C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy (¹³C{¹H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame (T_1ρ(H)), in the laboratory frame (T₁(H)) and cross-polarization times (T_CH). Results showed that silica nanoparticles are well dispersed in the polymeric matrix whose structure remains amorphous. The degradation of the polymer occurs at higher temperature in the presence of silica because of the interaction between the two components.     

Solid state 13C MAS NMR as a tool for the study of reactions between compounds adsorbed on porous materials

It is shown that magic angle spinning (MAS) solid state ¹³C NMR spectroscopy is a valuable tool for the study of reactions between compounds adsorbed on porous materials because it allows the direct characterization of surface species. The mobility of the adsorbed species yields high-resolution ¹³C spectra at moderate spinning speeds (4 kHz) from which the reactions can be traced. Catalysis of KMnO₄ oxidation of alcohols and proton transfer by the solid support is demonstrated. Received: 22 July 1996 / Revised: 20 August 1996 / Accepted: 23 August 1996     

Solid state 13C MAS NMR as a tool for the study of reactions between compounds adsorbed on porous materials

It is shown that magic angle spinning (MAS) solid state ¹³C NMR spectroscopy is a valuable tool for the study of reactions between compounds adsorbed on porous materials because it allows the direct characterization of surface species. The mobility of the adsorbed species yields high-resolution ¹³C spectra at moderate spinning speeds (4 kHz) from which the reactions can be traced. Catalysis of KMnO₄ oxidation of alcohols and proton transfer by the solid support is demonstrated. Received: 22 July 1996 / Revised: 20 August 1996 / Accepted: 23 August 1996     

Novel organic–inorganic hybrid materials from renewable resources: Hydrosilylation of fatty acid derivatives

Novel hybrid organic–inorganic materials were prepared from 10‐undecenoyl triglyceride and methyl 3,4,5‐tris(10‐undecenoyloxy)benzoate via hydrosilylation. 1,4‐Bis(dimethylsilyl)benzene, tetrakis(dimethylsilyloxy)silane, and 2,4,6,8‐tetramethylcyclotetrasiloxane were used as crosslinkers. The hydrosilylation reaction was catalyzed by Karstedt's catalyst [Pt(0)–divinyltetramethyldisiloxane complex]. The networks were structurally characterized by Fourier transform infrared spectroscopy, ¹³C NMR, and ²⁹Si magic‐angle‐spinning NMR. The thermal properties of these hybrids were studied with differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. The obtained materials showed good transparency and promising properties for optical applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6295–6307, 2005     

Effect of NCO/OH ratio and Ce‐Zr nanoparticles on the thermo‐mechanical properties of hyperbranched polyurethane urea coatings

The present study describes the effect of NCO/OH ratio and addition of Cerium (Ce)‐Zirconium (Zr) mixed oxide nanoparticles on the properties of Hyperbranched Polyurethane Urea (HBPUU) Coatings. Initially a hydroxyl terminated hyperbranched polymer (HTBP) was synthesized through A₃ + CB₂ approach. The HTBP and Ce‐Zr nanopowder dispersed HTBP, both were reacted with hexamethylene diisocyanate (HDI) separately; at various NCO/OH eq. ratios to get different NCO terminated HBPU and HBPU/Ce‐Zr hybrid prepolymers. These prepolymers were used for the preparation of HBPUU and HBPUU/Ce‐Zr hybrid coating films through moisture curing. The techniques such as ¹H NMR, ¹³C NMR, FT‐IR, and XRD have been used for structural information while Dynamic mechanical and thermal analyzer (DMTA), Thermogravimetric analysis (TGA) and Universal testing machine (UTM) have been used for evaluation of thermo‐mechanical properties. The combined spectroscopic investigations results indicate the formation of HBPUU network with a degree of branching of 76% while FT‐IR deconvolution results indicates the formation of more hydrogen bonded structure with increasing NCO/OH ratio. The XRD and FT‐IR studies confirm the presence of Ce‐Zr mixed nanoparticles in the HBPUU hybrids. As per TGA and DMTA analysis the thermal stability, char residue, storage modulus (E', material stiffness) and glass transition temperature (T_g), increases with increasing NCO/OH ratio and Ce‐Zr nanoparticle loading in HBPUU coatings. In general, UTM data suggest that the tensile strength increases and per cent elongation at break decreases with increasing the NCO/OH ratio and addition level of nanoparticles in HBPUU coatings. Copyright © 2009 John Wiley & Sons, Ltd.     

Effects of spinning conditions on the mechanical properties of ultrahigh‐molecular‐weight polyethylene fibers

We investigated the tensile strength and modulus of ultrahigh‐strength polyethylene (UHSPE) fibers obtained by using the special two‐step‐drawing process of as‐spun fiber (ASFs) which were prepared by the so‐called gel‐spinning method. We have found that the higher the ASF's spinning speed is, the higher the attainable tensile strength σ_f and modulus E are. For all the fibers drawn from ASFs with various spinning speed except for 120 m/min, we have found a master curve for the inverse of σ_f which is plotted as a function of T^1/4E^?1/2, where T is the linear density of the drawn fibers, in consistent with the Griffith theory: a thicker fiber obtained with a lower spinning speed exhibits lower strength, although all the AFSs possess the same value of E. This also suggests that a thicker fiber contains more defects which would lead to the Griffith‐type crack propagation breakage. Moreover, from morphological observation of ASFs under transmission electron microscopy, the ASF obtained at a relatively low spinning speed possesses a heterogeneous cross‐sectional morphology, whereas that obtained at relatively high spinning speed possesses a relatively homogenous morphology. We propose that this morphological evidence may account for the experimental findings of the behavior of the mechanical properties described above. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2639–2652, 2005     

Preparation and characterisation of SrCe0.95Yb0.05O2.975 hollow fibre membranes

A mixed proton and electronic conducting hollow fibre membrane, SrCe_0.95Yb_0.05O_2.975 (SCYb), has been prepared by spinning a polymer solution containing suspended SCYb particles to a hollow fibre precursor, which is then sintered at elevated temperatures. The SCYb powders having a sub-micron size, i.e. an essential size for fabrication of the hollow fibre with good mechanical strength, were synthesised through a polymerised water-soluble complex method. By controlling weight ratio of the SCYb ceramic powder to the polymer binder and sintering temperatures, the SCYb ceramic hollow fibres with gas-tight properties can be prepared. Some primary factors affecting microstructures, gas tightness and mechanical strength of the mixed conducting hollow fibre membranes were studied in details.     

Determination of the activation energies for α and β transitions of a system containing a diglycidyl ether of bisphenol a (DGEBA) and 1,3-bisaminomethylcyclohexane (1,3-BAC)

Using dynamic mechanical analysis (DMA) we have studied the variation with the frequency of the dynamic mechanical properties (storages modulus,E'; loss modulus,E'' and loss tangent or tan σ) for a system containg a diglycidyl ether of bisphenol A (DGEBA) and 1,3-bisaminomethylcyclohexane (1,3-BAC). These properties were measured both in the glass transition and β transition regions. An increase in frequency caused a shift of tan σ peak positions in both regions toward higher temperature. Finally, we report the activation energies of a DGEBA/1,3-BAC expoxy system for α and β transitions.     

Structural and dynamic study of chemically modified polyHIPE by solid‐state 13C NMR spectroscopy

The structure of laboratory‐made polyHIPEs was successfully characterized by cross‐polarity/magic‐angle spinning, solid‐state ¹³C NMR experiments. The signals of vinyl groups appeared in the spectrum of the polyHIPE precursor PH? CH?CH₂, which was prepared by the polymerization of the divinylbenzene continuous phase from a highly concentrated reverse emulsion. This material was chemically modified by the regioselective free‐radical addition of thiols to the pendant vinyl groups. Spectra of materials modified by the grafting of C₈ and C₁₂ alkyl chains, PH? SC₈ and PH? SC₁₂, respectively, were produced. The signals of the vinyl groups disappeared in favor of methylene groups. This experiment clearly established that the alkyl chains were covalently bound to the polymer. To elucidate the dynamic aspect of long chains in polyHIPE, we measured the ¹³C spin–lattice relaxation times (T₁) of PH? SC₁₂ from 25 to 100 °C with variable‐temperature, solid‐state, high‐resolution ¹³C NMR spectroscopy, revealing a strong variation in T₁ along the alkyl side chain. Furthermore, the crystallinity of a wide range of chemically modified polyHIPEs, including PH? SC₁₂, was studied with pulse ¹H NMR. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 956–963, 2001     

Effect of wet spinning parameters on the properties of novel cellulosic fibres

Novel cellulose fibres (Biocelsol) were spun by traditional wet spinning technique from the alkaline solution prepared by dissolving enzyme treated pulp directly into aqueous sodium zincate (ZnO/NaOH). The spinning dope contained 6 wt.% of cellulose, 7.8 wt.% of sodium hydroxide (NaOH) and 0.84 wt.% of zinc oxide (ZnO). The fibres were spun into 5% and 15% sulphuric acid (H₂SO₄) baths containing 10% sodium sulphate (Na₂SO₄). The highest fibre tenacity obtained was 1.8 cNdtex⁻¹ with elongation of 15% and titre of 1.4 dtex. Average molecular weights and shape of molecular weight distribution curves of the celluloses from the novel wet spun cellulosic fibre and from the commercial viscose fibre were close to each other.     

Effect of the graft density of cellulose diacetate-modified layered perovskite nanosheets on mechanical properties of the transparent organic–inorganic hybrids bearing covalent bonds at the interface

Transparent organic–inorganic hybrids with a whitish colour were prepared from cellulose diacetate (CDA) nanosheets derived from Dion–Jacobson-type ion-exchangeable layered perovskite HLaNb₂O₇·xH₂O (HLaNb) to prepare CDA-based hybrids bearing covalent bonds between HLaNb nanosheets and CDA matrices for improved mechanical properties. An n-decoxy derivative of HLaNb (C10_HLaNb) was exfoliated in acetonitrile by ultrasonication. TEM and AFM images revealed that C10_HLaNb was exfoliated into individual nanosheets. In order to explore the local environment around HLaNb nanosheets, a very small amount of CDA was reacted with a C10_HLaNb nanosheet dispersion [molar ratio COH:(NbOH + NbOC₁₀H₂₁) = 4:1] at 80 °C, and solid-state ¹³C NMR with cross polarization and magic angle spinning techniques showed that an alcohol-exchange-type reaction was proceeded to graft the CDA chains to the HLaNb nanosheets via new Nb–O–C covalent linkages. The CDA-based hybrids were prepared by dispersing 5 mass% of HLaNb nanosheets in CDA and subsequent heating at 80 °C for 1–7 days to cause a grafting reaction, and the product prepared by a 1-day grafting reaction exhibited improved mechanical properties compared to neat CDA; the Young’s modulus, tensile strength and toughness increased by 18, 34 and 78%, respectively. The mechanical properties deteriorated with further extension of the reaction period, however. In addition, a hybrid film prepared by mixing CDA and a C10_HLaNb nanosheet dispersion exhibited only a slight improvement in mechanical properties. These results clearly indicate that formation of an appropriate number of Nb–O–C bonds at the nanosheet/CDA interfaces is effective for improving mechanical properties.     

Molecular structure and spectra of titanium and vanadium trifluorides: Complete basis set CCSD(T) study

Quantum chemical study on TiF₃ and VF₃ molecules was carried out using the CCSD(T) coupled cluster method using the triple-, quadruple-, and quintuple-zeta basis set and an extrapolation to the complete basis set limit. The methods of multireference configuration interaction MRCISD+Q and perturbation theory MCQDPT2 were used also. The symmetry of the ground electronic state was determined: ² A′₁ and ³ E″ in TiF₃ and VF₃, respectively. The adiabatic excitation energies were evaluated: AEE(TiF₃, $\tilde A^2 E'' \leftarrow \tilde X^2 A'_1 $ ) = 5000 cm^?1, AEE(VF₃, $\tilde A^3 A'_2 \leftarrow \tilde X^3 E''$ ) = 1000 cm^?1. The Jahn-Teller effect in $\tilde A^2 E''$ state of TiF₃ and $\tilde X^3 E''$ state of VF₃ was investigated. The computed Jahn-Teller stabilization energy D _3h → C _2v amounts to 555 and 292 cm^?1, respectively. The spin-orbit coupling effect on the VF₃ molecular structure and spectrum of electronic states is shown to be quite significant. The calculated vibrational frequencies of TiF₃ are in excellent agreement with IR spectroscopy data. The atomization enthalpies were evaluated: Δ_at H ₂₉₈ ^pO = 430 kcal/mol (TiF₃), 393 kcal/mol (VF₃).     

Effects of take‐up speed on the structure and properties of melt‐spun poly(L‐lactic acid) fibers

Poly(L ‐lactic acid) (PLLA) filament fibers were prepared by one‐step melt spinning process and the effects of variations in take‐up speed on their thermal properties, mechanical properties, and crystalline structures were investigated. Differential scanning calorimetry (DSC) results revealed that the PLLA fibers showed multiple melting peaks and that the melting peak appearing at a lower temperature moved lower while that at a higher temperature moved higher with increasing take‐up speed. The glass transition temperature (T_g) obtained from dynamic mechanical analysis (DMA) increased with increasing take‐up speed. The tenacity increased and the boiling water shrinkage (BWS) decreased with increasing take‐up speed. However, these mechanical and thermal properties were stabilized at take‐up speeds over 3500 m/min. The melt‐spun PLLA fibers of this study showed an α‐form crystal structure which was not affected by the take‐up speed. The change in the tendency of the thermal and mechanical properties at around 3500 m/min did not appear to result from the change in crystal form but rather from the change in crystallite size and crystallite orientation. Copyright © 2008 John Wiley & Sons, Ltd.     

On the Bulk Properties of a Poly(Bicycloacrylate) Carrying Semifluorinated Side Groups

We prepared a novel fluorinated polymer from a bicycloacrylate monomer, (1H,1H,2H,2H)-perfluorododecyl 2-(bicyclo[3.1.0]hex-1-yl)acrylate, by radical ring opening polymerization. The bulk properties of the polymer were investigated by thermal analysis and X-ray diffraction, which proved the existence of a smectic mesophase up to the isotropization temperature of 74 °C. Furthermore, a solid state NMR study was started to characterize domains with different mobility mainly by ¹³C cross-polarization magic angle spinning and T₂ selective experiments. We found that the polymer is a homogeneous sample with the presence of dynamic motions in the kHz regime below the glass transition temperature.     

Study on poly(ε‐caprolactone)‐based shape memory copolymer fiber prepared by bulk polymerization and melt spinning

In this paper, a poly(ε‐caprolactone) (PCL)‐based shape memory polyurethane fiber was prepared by melt spinning. The shape memory switching temperature was the melting transition temperature of the soft segment phase mainly composed of PCL at 47°C. The mechanical properties especially shape memory effect were explicitly characterized by thermomechanical cyclic tensile testing. The results suggest that the prepared fiber has shape memory effects. The prepared 40 denier shape memory fiber had a tenacity of about 1.0 cN/dtex, and strain at break 562–660%. The shape fixity ratio reached 84% and the recovery ratio reached 95% under drawing at high temperature and thermal recovery testing.¹ Finally, the fiber thermal/mechanical properties were measured using differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Copyright © 2007 John Wiley & Sons, Ltd.     

High-Temperature transformations of aromatic diamines in the Rolivsan matrix

The formation mechanism, structure, and properties of new network copolymers prepared by thermochemical transformations of Rolivsans with aromatic diamines were studied by IR, ¹Н NMR, and ¹³С NMR spectroscopy and by dynamic mechanical, thermal, and elemental analysis.     

Intriguing E…E' bonding in [Nap(EPh)(E'Ph)]•+ (E,E'=O,S, Se,Te)

The nature of E···E' bonding in homonuclear (E = E') and heteronuclear (E ≠ E') [Nap(EPh)(E'Ph)]^?+ (E, E' = O, S, Se, and Te) radical cations has been investigated by quantum chemistry and the topological analysis of electron density. The calculation results show that the E···E' bonding in the title compounds occurs through attractive interactions; O···E' (E'=O, S, Se, and Te) bonding are electrostatic interactions, and the others have a partial covalent character. The nature of E···E' bonding varies periodically, with the changes of E' atoms going from the lighter to the heavier (O, S, Se, and Te). Both in homonuclear and heteronuclear [Nap(EPh)(E'Ph)]^?+, for the same E atom, a heavier E' atom means stronger E···E/E' bonding, a more covalent character of the E···E' bond, and more spin electron density transfers from benzene rings to the E···E' group. © 2016 Wiley Periodicals, Inc.     

Synthesis and thermal degradation behaviors of hyperbranched polyphosphate

A novel epoxy-terminated hyperbranched polyphosphate (E-HBPP) was synthesized by employing an A₂ + B₃ polycondensation and characterized by FTIR, ¹H NMR and GPC. E-HBPP was used as a reactive-type flame retardant for diglycidyl ether of bisphenol-A/m-phenylene diamine (DGEBA/mPDA) system. A series of flame retardant resins were prepared and their flame retardancy was monitored by the limiting oxygen index (LOI). The results showed that the LOI value of the cured samples and the degree of expansion of the formed char after burning increased along with the E-HBPP content. Their thermal degradation behaviors were investigated by thermogravimetric analysis and in situ FTIR and showed that the phosphate group of E-HBPP first degraded to form poly(phosphoric acid)s at around 300 °C, which had a major contribution to form the compact char to protect the sample from further degradation. The dynamic mechanical thermal properties were studied by dynamic mechanical thermal analysis (DMTA) and the results showed a good miscibility between E-HBPP and DGEBA. The mechanical properties of the cured films were also investigated. Less than 20% E-HBPP addition improved both the tensile strength and elongation at break.     

Preparation and StructuralCharacterization of RuII‐DMSO and RuIII‐DMSO‐substituted α‐Keggin‐type Phosphotungstates, [PW11O39RuIIDMSO]5– and [PW11O39RuIIIDMSO]4–, and Catalytic Activity for Water Oxidation

Ru^II‐ and Ru^III‐substituted α‐Keggin‐type phosphotungstates with a dimethyl sulfoxide (DMSO) ligand, [PW₁₁O₃₉Ru^IIDMSO]^5– ( 1 ) and [PW₁₁O₃₉Ru^IIIDMSO]^4– ( 2 ), were synthesized. Compound 1 was prepared by reaction of [PW₁₁O₃₉]^7– with [Ru^II(DMSO)₄]Cl₂ in water at 125 °C under hydrothermal conditions and was isolated as a cesium salt. Compound 2 was prepared by reaction of 1 with bromine in water at 60 °C and was isolated as a cesium salt. The compounds were characterized by cyclic voltammetry, elemental analysis, UV/Vis, IR,³¹P NMR, ¹⁸³W NMR, ¹H NMR, and XANES (Ru K‐edge and L₃‐edge)spectroscopic methods. Single crystal structural analysis of 1 revealed that Ru^II is incorporated in the α‐Keggin framework and coordinated by DMSO through a Ru–S bond. Cyclic voltammetry of 1 indicated that the incorporated Ru^II‐DMSO is reversibly oxidizable to the Ru^III‐DMSO derivative 2 . Compound 1 showed catalytic activity for water oxidation in the presence of cerium ammonium nitrate as an oxidant.