孔道结构H3PW12040／TiO2的制备及其可见光光催化降解水溶性染料的性能

采用溶胶一凝胶方法制备了孔道结构复合材料H3PW12040／TiO2，采用ICP-AES，UV／DRS，^31PMAS NMR，TEM和N2吸附等技术对其组成和结构进行了表征．结果表明，催化剂中活性组分H3PW12O40的基本骨架结构未发生改变，H3PW12O40的担载量为22．29％，催化剂平均粒径为40nm，具有双孔结构，其平均微孔和介孔孔径分别为0．6l和3．06nm．考察了催化剂可见光光催化降解6种水溶性染料的性能．结果表明，6种染料均可不同程度地被降解和矿化．通过对染料中性红的光催化降解实验，比较了H3PW12040／TiO2，Degussa P-25和锐钛矿结构Ti02的可见光光催化活性，其中，H3PW12040／TiO2活性最高，且催化剂最易分离，可循环使用．     

复合光催化材料H3PW122O40/Ta2O5光催化降解染料的研究

采用溶胶-凝胶法制备了半导体型金属氧化物Ta2O5,并通过浸渍法与杂多酸H,PW12O40复合,获得了纳米复合光催化材料H3PW12O40/Ta2O5.通过1CP-AES、FT-lR、N2吸附、Tc等手段对其组成、结构及其表面物理化学性质进行了表征,并在可见光下考察了该复合材料对可溶性染料罗丹明B和亚甲基蓝的光催化活性.实验结果表明,该复合材料存可见光下有较好的光催化活性,其中,H3PW12O40/Ta2O5在180min内对亚甲基蓝的光催化降解转化率达到78%.     

采用溶胶-凝胶-溶剂热路径合成H_3PW_(12)O_(40)/TiO_2和H_4SiW_(12)O_(40)/TiO_2及其光催化降解二硝基甲苯(英文)

以非离子表面活性剂P123为结构导向剂,采用溶胶-凝胶与溶解热相结合方法,制备了两类介孔材料H3PW12O40/TiO2和H4SiW12O40/TiO2,并对其进行了表征.X射线粉末衍射和拉曼光谱分析表明,所制催化剂为锐钛矿晶型,体系中H3PW12O40和H4SiW12O40的Keggin结构经400°C焙烧后仍保持完整.H3PW12O40/TiO2和H4SiW12O40/TiO2的平均粒径分别为15.49和7.75 nm.N2吸附-脱附和扫描电镜结果表明,P123的加入使催化剂的粒径减小,比表面积和孔体积明显增大,其中H3PW12O40/TiO2和H4SiW12O40/TiO2的比表面积分别高达252.2和250.0 m2/g.紫外漫反射吸收光谱表明,与纯TiO2相比,复合催化剂的吸收光谱发生了明显的红移,且吸收强度明显增大.催化剂对DNT降解实验表明,在最佳操作条件下降解率可高达95%.     

H_3PW_(12)O_(40)/TiO_2(锐钛)的超声制备及降解染料的研究

采用超声法,在80℃下,制备了H3PW12O40/TiO2(锐钛)复合催化剂,并采用XRD、FT-IR等方法对样品进行了表征。通过染料刚果红和亚甲基蓝为模拟污染物的光催化降解实验考察了复合催化剂的光催化活性。结果表明,在太阳光下,复合光催化剂的催化活性高于单体TiO2,H3PW12O40/TiO2(锐钛)在90min内,对溶液中刚果红的去除率达99.17%,对亚甲基蓝溶液的TOC去除率达73.17%。复合催化剂在反复实验5次后,仍能保持有效的催化性能。     

多酸修饰二氧化钛纳米管复合膜的制备、表征及其光催化降解甲基橙的研究

采用电沉积方法制备了H3PW12O40(PW12)-TiO2复合膜,通过SEM,EDX和XRD等手段,对其组成和结构进行了表征,并考察了该复合膜催化剂对降解甲基橙的催化活性.实验结果表明PW12存在于TiO2纳米管结构中,用PW12多酸修饰的TiO2纳米管比单独的TiO2纳米管展示出更好的光催化性能,由于电子能够从TiO2纳米管导带转移到多酸的LUMO能级,有效抑制了光生电子和空穴的复合,因而使PW12-TiO2复合膜表现出更高的光催化活性.     

微波增强H3PW12O40／TiO2光催化降解染料和水杨酸的研究

以孔雀石绿为模型分子, 考察了微波无极灯的形状、微波功率和溶液初始浓度对光催化降解效果的影响. 并且在最佳微波反应条件下, 考察了通过溶胶-凝胶再结合程序升温水热法制备的复合材料H3PW12O40/TiO2对刚果红、酸性黑、酸性品红和水杨酸的光催化降解情况. 结果表明, 微波无极灯具有更好地增强H3PW12O40/TiO2光催化降解有机污染物的作用.     

H2O2络合凝胶法制备纳米TiO2/SiO2复合催化剂及其光催化性能

采用H2O2络合凝胶法获得钛的络合物[TiO(H2O2)]2 水溶胶,并与SiO2水溶胶包覆复合,制备了纳米TiO2/SiO2复合半导体催化剂,其结构经XRD和BET表征。以含阳离子艳红染料模拟废水降解为模型反应,考察了复合催化剂的光催化性能。实验结果表明:经650℃焙烧后的复合催化剂中TiO2粒径为9.8 nm,光催化活性最好,SiO2的最佳掺杂量为25%。     

H_3PW_(12)O_(40)掺杂TiO_2介孔材料的制备及光催化性能

以P123为模板剂,采用溶胶-凝胶的溶剂热合成方法制备了H3PW12O40掺杂TiO2介孔材料H3PW12O40/TiO2.利用紫外可见漫反射吸收光谱(UV-vis/DRS)、X射线粉末衍射(XRD)、N2吸附和透射电子显微镜(TEM)手段对所制备的材料进行结构表征,罗丹明B(RB)为模型污染物评价其光催化性能.结果表明,所制备的介孔材料具有锐钛矿与板钛矿复合的晶型结构、大的BET比表面积和孔径均匀分布的介孔结构.光催化实验表明,H3PW12O40/TiO2可将罗丹明B完全矿化.     

有机染料罗丹明B在复合催化剂TiO2-APS-PW11Ni作用下的光降解研究

利用自组装方式制备了多酸-有机胺-二氧化钛复合催化剂K5Ni(H2O)PW11O39-APS-TiO2(APS为(C2H5O)3SiCH2CH2CH2NH2的简称),简称为TiO2-APS-PW11Ni,通过红外(IR),紫外漫反射(UV/DRS)对其组成和结构进行了表征.并利用该催化剂光降解染料污染物罗丹明B(RB)水溶液,与纳米TiO2催化剂光降解进行对比,结果表明,染料罗丹明B在复合催化剂作用下的催化效果明显优于TiO2光催化效果,计算得降解半衰期分别为:T1/2(复合催化剂)＝6.5 min,T1/2(TiO2)＝21.2 min.     

磷钨酸钾模板法制备高活性二氧化钛空心微球

TiO2空心微球因具有低密度、高活性、易分离而有利于多次重复使用的优点而广受关注.本文介绍一种无氟制备TiO2空心微球的简单方法——磷钨酸钾(K3PW12O40)模板法.首先,将H3PW12O40和KCl溶液混匀,得到白色牛奶状的K3PW12O40模板(式(1)),然后在磁力搅拌下加入一定量的Ti(SO4)2粉末,加热至大约125oC开始回流.回流8 h后,过滤洗涤.滤饼分散在强NaOH溶液中,原位除去K3PW12O40模板(式(2)).最后,将催化剂洗涤到滤液为中性,干燥后即得到TiO2空心微球.3KCl + H3PW12O40= K3PW12O40ˉ+3HCl (1) K3PW12O40+24NaOH =12Na2WO4+ K3PO4+12 H2O (2) Ti(SO4)2+2H2O = TiO2+2H2SO4(3)我们将所制备的TiO2空心微球,采用X射线衍射、透射电子显微镜、扫描电子显微镜、傅立叶红外光谱、固体粉末漫反射和X射线光电子能谱等进行了表征.采用紫外光催化降解阴离子染料(活性嫣红X3B)来评价催化剂的性能.实验结果显示：(1)所制TiO2空心微球直径在0.5–1.0μm;(2)磷钨酸钾模板剂充当晶核,有利于空心微球的晶化;(3)加入的高浓度硫酸钛,水解产生大量的硫酸,抑制硫酸钛水解,不利于TiO2空心微球的晶化(式(3));(4)催化剂的活性随着硫酸钛量的增加而先增后降.4 mmol硫酸钛用量的TiO2空心微球具有最高的光催化活性,是TiO2颗粒样品(无磷钨酸钾模板法制备)的2.1倍.用该方法制备的TiO2空心微球活性高可归因于以下主要原因：(1)TiO2空心微球独特的孔结构;(2)良好的晶化程度(TiO2样品晶化度越高,越有利于光生载流子的分离,抑制复合);(3)样品残余磷钨酸钾模板和TiO2之间存在光生电子转移,有利于空心微球TiO2活性的提高.该法具有操作简单、重复性好、易于批量制备的等优点,有望广泛应用于(光)催化、电化学、分离与纯化以及药物缓释等领域.     

1-丁基-3-甲基咪唑磷钨酸盐的制备及其对酯化反应的催化性能

以溴化1-丁基-3-甲基咪唑盐([bmim]Br)和磷钨酸(H3PW12O40)为原料制备了1-丁基-3-甲基咪唑磷钨酸盐([bmim]3PW12O40)催化剂,并用傅里叶变换红外光谱、热重分析-差示扫描量热法、正丁胺电位滴定及元素分析等技术对催化剂进行了表征,考察了催化剂对乙醇与乙酸酯化合成乙酸乙酯反应的催化活性.结果表明,[bmim]3PW12O40中有3个结晶水,并保持有H3PW12O40的Keggin结构和酸强度,[bmim]3PW12O40的酸量明显少于H3PW12O40的酸量.在乙醇与乙酸酯化合成乙酸乙酯反应中,[bmim]3PW12O40催化剂具有较高的催化活性和较好的重复使用性能.     

Silica-coated magnetic NiFe2O4 nanoparticles-supported H3PW12O40; synthesis,preparation, and application as an efficient,magnetic, green catalyst for one-pot synthesis of tetrahydrobenzo[b]pyran and pyrano[2,3-c]pyrazole derivatives

Research on Chemical Intermediates - A powerful, magnetic, supported, acid catalyst, NiFe2O4@SiO2–H3PW12O40, was prepared by chemical support of Keggin (H3PW12O40) heteropolyacid (HPA) on...     

12-Tungstophosphates I-mmobilized on Chemically Modified Mesoporous Silica SBA-15

A functionalized material. PW/SBA-15m, was prepared successfully in diluted H2SO4 aqueous solutions by immobilizing 12-tungstophosphates on chemically modified mesoporous silica SBA-15 and characterized by elemental analysis, FTIR, ^31p MAS NMR, XRD and TEM. The results indicate that the framework of SBA-15 and the Keggin structure of PW12O40^3- were retained, and that 23%-33% (mass fraction) of PW12O40^3- wasimmobilized; the PW12O40^3- anions were finely dispersed on the pore wall of SBA-15. Having been leached in ethanol at 60 ℃ for 7 h, the loss of PW12O40^3- anions was not found.     

[Cu(2,2'-bpy)Cl2]和[Cu(1,10-phen)C12]在多金属氧酸盐上的多相化:选择性氧化四氢化萘的新催化剂

Mononuclear Cu(II)bipyridine(1)and phenantroline complexes(2)were synthesized and immobilized by different procedures on H3PW12O40 polyoxometalate(POM).Characterization by XRD and SEM-EDX were performed to assess the preservation of the Keggin structure and stoichiometry of the complex.The immobilized complexes were tested as heterogeneous catalysts for the partial oxidation of tetralin(1,2,3,4-tetrahydronaphthalene)using hydrogen peroxide as oxidant in acetonitrile/water as solvent.[Cu(2,2’-bpy)Cl][H2PW12O40] and[Cu(1,10-phen)Cl][H2PW12O40]oxidized tetralin at room temperature,with 16%conversion with(2),to 1-tetralone and 2-tetralone with 83%selectivity.However,the selectivity for 1-tetralone was only 56%.Different preparation methods for the heterogenization of these complexes on the POM Keggin unit were compared and used to enhance the selectivity to 1-tetralone to 75%.     

三维有序大孔杂化材料3DOM PW11Ni-APS-TiO2紫外光催化降解罗丹明B

采用甲醇法制备三维有序大孔结构(3DOM)TiO2,再经过有机胺(EtO)3Si(CH2)3NH2(APS)功能化修饰后,通过自组装技术将取代型杂多酸盐K5[Ni(H2O)PW11O39](PW11Ni)与其负载,从而制备了三维有序大孔取代型多金属氧酸盐-有机胺-TiO2杂化催化剂3DOM PW11Ni-APS-TiO2。通过FT-IR,ICP-AES,XRD,UV-Vis/DRS, XPS和SEM等测试手段对其组成、结构和形貌等进行了表征,结果表明,通过自组装技术将APS功能化修饰的3DOM TiO2与杂多酸盐PW11Ni负载后,该杂多酸盐PW11Ni通过Ni-N配位键与3DOM TiO2键合。同时,所制备的3DOM PW11Ni-APS-TiO2具有TiO2锐钛矿结构,且该合成产物由于模板剂聚苯乙烯(PS)胶球的作用呈现着规则、有序和开放性的三维有序大孔结构,其通透性的孔结构十分有利于反应过程中反应物和产物分子的扩散。紫外光催化降解罗丹明B实验结果表明,3DOM PW11Ni-APS-TiO2的紫外光催化降解活性明显高于直接光解和其他对比体系。     

两种有机-无机复合杂多化合物的水热合成及结构表征

利用水热法制备了基于饱和Keggin结构阴离子构筑的有机-无机复合多金属氧酸盐(4,4′-bipy)4H4[PMo12O40](CH3COO).1.5H2O(1)和(4,4′-Hbipy)2(4,4′-bipy)2H[PW12O40].3.5H2O(2)(4,4′-bipy=4,4′-联吡啶),并借助元素分析、红外光谱、紫外光谱、热分析和X射线单晶衍射分析了两种化合物的组成和结构.结果表明,化合物1和2均属于单斜晶系,P2(1)/c空间群.化合物的晶胞参数为:a=1.869 40(13)nm,b=1.404 23(9)nm,c=2.707 76(18)nm,β=105.848 0(10)°,V=6.837 9(8)nm3,Z=4,R1=0.095 4;化合物2的晶胞参数为:a=1.884 80(12)nm,b=1.409 89(9)nm,c=2.664 92(17)nm,β=105.368 0(10)°,V=6.828 4(8)nm3,Z=2,R1=0.097 2.两种化合物结构类似,其结构单元均是由饱和Keggin阴离子与游离的4,4′-联吡啶分子通过静电作用相结合形成的.     

One-electron redox processes during polyoxometalate-mediated photocatalytic reactions of TiO(2) studied by two-color two-laser flash photolysis

The one-electron redox processes of several compounds during polyoxometalate (POM)-mediated photocatalytic reactions of TiO(2) were investigated using the two-color two-laser flash-photolysis technique. The efficiency of the one-electron oxidation of aromatic sulfides by the trapped hole (h(tr) (+)) or the surface-bound OH radical (OH(s) (.)) is found to be significantly enhanced due to electron transfer from the conduction band (CB) of TiO(2) to the POM. The efficiency of the electron transfer from the CB of TiO(2) to the POM decreases in the order H(2)W(12)O(40) (6-) < SiW(12)O(40) (4-) < PW(12)O(40) (3-), that is, it depends on the reduction potential (E(red)) of the POMs. Electron injection from PW(12)O(40) (4-) in the excited state (PW(12)O(40) (4-*)) to the CB of TiO(2) was clearly observed using the two-color two-laser flash-photolysis technique. Storage of electrons in the TiO(2)/PW(12)O(40) (3-)/methyl viologen (MV(2+)) ternary system was also achieved upon two-color two-laser irradiation.     

Selective conversion of cellobiose and cellulose into gluconic acid in water in the presence of oxygen, catalyzed by polyoxometalate-supported gold nanoparticles

Gold nanoparticles loaded onto Keggin-type insoluble polyoxometalates (Cs(x)H(3-x)PW(12)O(40)) showed superior catalytic performances for the direct conversion of cellobiose into gluconic acid in water in the presence of O(2). The selectivity of Au/Cs(x)H(3-x)PW(12)O(40) for gluconic acid was significantly higher than those of Au catalysts loaded onto typical metal oxides (e.g., SiO(2), Al(2)O(3), and TiO(2)), carbon nanotubes, and zeolites (H-ZSM-5 and HY). The acidity of polyoxometalates and the mean-size of the Au nanoparticles were the key factors in the catalytic conversion of cellobiose into gluconic acid. The stronger acidity of polyoxometalates not only favored the conversion of cellobiose but also resulted in higher selectivity of gluconic acid by facilitating desorption and inhibiting its further degradation. On the other hand, the smaller Au nanoparticles accelerated the oxidation of glucose (an intermediate) into gluconic acid, thereby leading to increases both in the conversion of cellobiose and in the selectivity of gluconic acid. The Au/Cs(x)H(3-x)PW(12)O(40) system also catalyzed the conversion of cellulose into gluconic acid with good efficiency, but it could not be used repeatedly owing to the leaching of a H(+)-rich hydrophilic moiety over long-term hydrothermal reactions. We have demonstrated that the combination of H(3)PW(12)O(40) and Au/Cs(3.0)PW(12)O(40) afforded excellent yields of gluconic acid (about 85%, 418 K, 11 h), and the deactivation of the recovered H(3)PW(12)O(40)-Au/Cs(3.0)PW(12)O(40) catalyst was not serious during repeated use.     

Preparation and Photocatalytic Activity of Ce,H3PW12O40 co-doped TiO2 Hollow Fibers

A series of Ce, H3PW12O40 co-doped TiO2 hollow fibers photocatalysts have been prepared by sol-gel method using ammonium ceric nitrate, H3PW12O40 and tetrabutyltitanate as precursors and cotton fibers as template, followed by calcination at 500 ℃ in N2 atmosphere for 2 h. Scanning electron microscopy, X-ray diffraction, nitrogen adsorption-desorption mea- surements, and UV-Vis spectroscopy are employed to characterize the morphology, crystal structure, surface structure, and optical absorption properties of the samples. The photo- catalytic performance of the samples has been studied by photodegradation phenol in water under UV and visible light irradiation. The results show that the TiO2 fiber materials have hollow structures, and the co-doped TiO2 hollow fibers exhibit higher photocatalytic activities for the degradation of phenol than un-doped, single-doped TiO2 hollow fibers under UV and visible light. In addition, the recyclability of co-doped TiO2 fibers is also confirmed that the TiO2 fiber retains ca. 90% of its activity after being used four times. It is shown that the co-doped TiO2 fibers can be activated by visible light and may be potentially applied to the treatment of water contaminated by organic pollutants. The synergistic effect of Ce and H3PW12O40 co-doping plays an important role in improving the photocatalytic activity.