Semidilute solution structure of cellulose in an ionic liquid and its mixture with a polar organic co‐solvent studied by small‐angle X‐ray scattering

Structural and thermodynamic properties of cellulose solutions in the ionic liquid 1‐ethyl‐3‐methylimidazolium acetate (EMIMAc) and its binary mixtures with N,N‐dimethyl formamide (DMF) are studied by small‐angle X‐ray scattering (SAXS). These measurements indicate molecular dissolution of the cellulose chains without any significant aggregation. The power–law relationships of the evaluated correlation length and osmotic modulus to concentration exhibit exponents of ?0.76 and 2.06 for EMIMAc and ?0.80 and 2.14 for DMF/EMIMAc solvent mixture, respectively. Thus, these solvents can be considered to be good solvents for cellulose. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 888–894     

Blue‐emitting poly[(m‐phenylene vinylene)‐alt‐(o‐phenylene vinylene)]s: The effect of regioregularity on the optical properties

Poly[(m‐phenylene vinylene)‐alt‐(o‐phenylene vinylene)]s with different contents of cis‐/trans‐CH?CH ( 3 and 6 ) have been synthesized through Wittig condensation. The polymers exhibit good solubility in common organic solvents such as toluene and tetrahydrofuran. A comparison of the optical properties has been made between 3 and its phenyl regioisomers containing either p‐phenylene or m‐phenylene units. The results show that the regiochemistry of the phenyl ring can be a useful tool for tuning the emission color of π‐conjugated polymers because the extension of π conjugation can only partially be achieved through an o‐phenylene bridge. Although both polymers 3 and 6 exhibit comparable low fluorescence quantum efficiencies (≈0.18) in solution, their films are highly luminescent, showing a broad emission band near 456 nm (blue color). Electroluminescence results show that the device of polymer 3 , which has a higher content of trans‐CH?CH linkages, is about 20 times more efficient than that of 6 . © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2650–2658, 2003     

Synthesis and characterization of nitrogen‐linked carbazole‐containing fluorescent polymers

We have prepared four light‐emitting polymers bearing a chromophore composed of carbazole and fluorene by the Suzuki coupling polycondensation. Two nonconjugated polymers (P3CzBFXy and P2CzFXy) had a chromophore tethered by the p‐xylylene spacer, whose connection point between carbazole and fluorene in addition to the number of fluorene unit was systematically changed to investigate the emission wavelength and intensity. The red‐shifted absorption and emission maximum wavelengths together with the improved fluorescence quantum yield of polymers P3CzBFXy and P2CzFXy indicate that the increment of the number of para‐connected benzene rings included in the chromophore effectively extends the conjugation length. The fact that polymer P3CzBFXy has longer wavelength absorption and emission spectra also indicates the interaction of the carbazole nitrogen lone pair with the oligophenylene moiety. Other two polymers P3CzFPy and P3CzFPym having the heterocycle directly bound to the carbazole nitrogen were prepared to know the character of the carbazole nitrogen lone pair and their influence on the fluorescence behavior. The fluorescence spectra of polymer P3CzFPym bearing the pyrimidine ring gradually red‐shifted in conjunction with the decrease of fluorescence quantum yield on going from toluene solution to CHCl₃ solution because of the intramolecular charge transfer at the excited state. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3729–3735, 2010     

Luminescent poly(phenylene vinylene) derivatives with m‐terphenyl or 2,6‐diphenylpyridine kinked segments along the main chain: Synthesis,characterization, and stimulated emission

Two new poly(phenylene vinylene)s containing m‐terphenyl or 2,6‐diphenylpyridine kinked units along the main chain were synthesized and were used as luminescent and laser materials. They were prepared from Heck coupling of 2,5‐didodecyloxy‐1,4‐divinylbenzene with 4,4″‐dibromo‐3′‐phenyl‐m‐terphenyl or 2,6‐di(4‐bromophenyl)‐4‐phenylpyridine. The kinked units along the main chain caused a partial interruption of the conjugation leading to emission at a shorter wavelength as compared with poly(p‐phenylene vinylene). The polymers presented blue‐green emission in solution and green‐yellow emission in the solid state with photoluminescence maxima at 465–497 and 546–550 nm, respectively. Polymer containing 2,6‐diphenylpyridine segments emitted at a longer wavelength than that containing m‐terphenyl and displayed higher quantum yields in solution (0.61 and 0.40, respectively). The influence of the solvent and polymer concentration on the photoluminescence characteristics was investigated. The photoluminescence properties of protonated polymer containing 2,6‐diphenylpyridine segments were investigated both in solution and in film. Amplified spontaneous emission and tunable laser action were also obtained from the two polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2214–2224, 2004     

Aqueous self‐assembly of pullulan‐b‐poly(2‐ethyl‐2‐oxazoline) double hydrophilic block copolymers

The self‐assembly of a novel double hydrophilic block copolymer in water without the application of external triggers is described, namely pullulan‐b‐poly(2‐ethyl‐2‐oxazoline) (Pull‐b‐PEtOx). The biomacromolecules, Pull (8–38 kg mol^?1), is modified and conjugated to biocompatible PEtOx (22 kg mol^?1) via modular conjugation. Moreover, the molecular weight of the Pull blocks are varied to investigate the effect of molecular weight on the self‐assembly behavior. Spherical particles with sizes between 300 and 500 nm are formed in diluted aqueous solution (0.1–1.0 wt %) as observed via dynamic light scattering and static light scattering. Additionally, cryo scanning electron microscopy and laser scanning confocal microscopy are performed to support the finding from light scattering. The block ratio study shows an optimum ratio of Pull and PEtOx of 0.4/0.6 for self‐assembly in water in the concentration range of 0.1–1.0 wt %. At higher concentrations of 20 wt %, vesicular structures with sizes above 1 µm can be observed via optical microscopy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3757–3766     

Unprecedented strong blue photoluminescence from hyperbranched polycarbonate: From its fluorescence mechanism to applications

Fluorescent polymers without π‐aromatic structure have been a hot spot in recent years. Polycarbonate has been applied in industry for many years; however, the fluorescent behavior of the polycarbonate has not been reported yet. Therefore, a kind of hyperbranched polycarbonate (HBPC) has been synthesized under solvent and catalyst‐free condition. Unexpectedly, the novel HBPC containing no conventional chromophores exhibits unimagined bright blue fluorescence under the irradiation of 334 nm UV light. The intensity of the HBPC fluorescence is rising in step with its concentration going up, showing an aggregation‐induced enhanced emission (AIEE). It is more interestingly that the fluorescence of HBPC could be affected by pH and metal ions. Specifically, the fluorescence of HBPC is extraordinarily sensitive to the Fe³⁺. TEM micrographs show that the HBPC self‐assemble to clustering in water. Rudimentary investigation illustrates that the formation of cluster accounts for the unexpected fluorescence in the HBPC. This phenomenon is typical of Clustering‐Triggered emission (CTE). This study exhibits a novel route for the design of CTE fluorescent polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3690–3696     

Control of the conjugation length and solubility in electroluminescent polymers

A new type of cyclolinear polymer, poly(phenylene vinylene‐alt‐cyclotriphosphazene), was synthesized through Heck‐type coupling reactions to produce π‐conjugated macromolecules with excellent solubility and precise electronic control of the band‐gap energy. This synthesis method is capable of producing well‐defined alternating polymers. The method is highly adaptable and can be readily used for other chromophore systems. The resulting polymers were also capable of accommodating a wide variety of substituents on the cyclophosphazene rings with minimal effect on the electronic properties. The band gap and electron affinities of the polymer were varied through the manipulation of the π‐conjugated unit located between the insulating phosphazene rings. Each chromophore matched the intended conjugation length consistently throughout the macromolecules. The polymers were good film formers because of the chosen substituents on the phosphazene rings. The absorbance of the polymers indicated minimal spectral shift from the monomer absorbance. This suggested an effective insulation of each chromophore unit from its neighbors by the phosphazene rings. Solution photoluminescence efficiencies were found to be up to 44.1%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 69–76, 2006     

Poly(triphenylamine)s derived from oxidative coupling reaction: Substituent effects on the polymerization,electrochemical, and electro‐optical properties

A series of triphenylamine‐based polymers containing electron‐donating methoxy (? OCH₃) and electron‐withdrawing cyano or nitro (? CN or ? NO₂) substituents in the main chains have been designed and investigated. These conjugated polymers ( P1 – P3 ) could be readily prepared by oxidative coupling polymerization from monomers ( M1 – M3 ) using FeCl₃ as an oxidant. The P2 and P3 exhibited moderate high T_g values (203–205 °C) and thermal stability. These polymers in NMP solution showed UV–vis absorption around 288–404 nm and photoluminescence peaks around 435–492 nm. P1 – P3 showed reversible oxidation redox couples at E_onset = 0.67, 0.99, and 1.00 V in solution of 0.1 M tetrabutylammonium perchlorate (TBAP)/acetonitrile (CH₃CN), respectively. M3 and P3 exhibited reversible reduction redox couples at E_onset = ?1.04 and ?1.03 V. These polymers also revealed electrochromic characteristic changing color at different potential. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 285–294, 2009     

Single-Benzene-Based Solvatochromic Chromophores: Color-Tunable and Bright Fluorescence in the Solid and Solution States

The search for structurally simple chromophores with superior fluorescence brightness and a wide range of solvent compatibility is highly desirable. Herein, a new type of single-benzene-based solvatochromic chromophore with a symmetric bifunctional structure, in which azetidine and ethoxycarbonyl moieties serve as the electron-donating and -withdrawing groups, respectively, is reported. This chromophore exhibits an extraordinary wide range of solvent compatibility and preserves excellent fluorescence quantum yields from nonpolar n-hexane to polar methanol and even in water. Unusually, the symmetric structure of the chromophore shows a distinct color change from bright green to red with increasing solvent polarity and possesses large Stokes shifts (λ=132–207 nm) in the tested solvents. Moreover, this single-benzene-based chromophore displays good photochemical stability in both solution and solid states, and even exhibits reversible mechanochromic luminescence.     

Efficient blue‐green‐emitting poly[(5‐diphenylamino‐1,3‐phenylenevinylene)‐alt‐(2,5‐dihexyloxy‐1,4‐phenylenevinylene)] derivatives: Synthesis and optical properties

New poly(phenylene vinylene) derivatives with a 5‐diphenylamino‐1,3‐phenylene linkage (including polymers 2 , 3 , and 5 ) have been synthesized to improve the charge‐injection properties. These polymers are highly photoluminescent with fluorescent quantum yields as high as 76% in tetrahydrofuran solutions. With effective π‐conjugation interruption at adjacent m‐phenylene units, chromophores of different conjugation lengths can be incorporated into the polymer chain in a controllable manner. In polymer 2 , the structural regularity leads to an isolated, well‐defined emitting chromophore. Isomeric polymer 3 of a random chain sequence, however, allows the effective emitting chromophores to be joined in sequence by sharing a common m‐phenylene linkage (as shown in a molecular fragment). Double‐layer light‐emitting‐diode devices using 2 , 3 , and 5 as emitting layers have turn‐on voltages of about 3.5 V and produce blue‐green emissions with peaks at 493, 492, and 482 nm and external quantum efficiencies up to 1.42, 0.98, and 1.53%, respectively. In comparison with a light‐emitting diode using 2 , a device using 3 shows improved charge injection and displays increased brightness by a factor of ～3 to 1400 cd/m² at an 8‐V bias. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2307–2315, 2006     

A facile approach to fabricate hierarchically structured poly(3‐hexylthiophene‐2,5‐diyl) films

Microstructured surfaces have great potentials to improve the performances and efficiency of optoelectronic devices. In this work, a simple robust approach based on surface instabilities was presented to fabricate poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) films with ridge‐like/wrinkled composite microstructures. Namely, the hierarchically patterned films were prepared by spin coating the P3HT/tetrahydrofuran (THF) solution on a polydimethylsiloxane (PDMS) substrate to form stable ridge‐like structures, followed by solvent vapor swelling to create surface wrinkles with the orientation guided by the ridge‐like structures. During spin coating of the P3HT/THF solution, the ridge‐like structures were generated by the in‐situ template of the THF swelling‐induced creasing structures on the PDMS substrate. To our knowledge, it is the first report that the creasing structures are used as a recoverable template for patterning films. The crease‐templated ridge‐like structures were well modulated by the THF swelling time, the modulus of the PDMS substrate, the P3HT/THF solution concentration and the selective/blanket exposure of the PDMS substrate to O₂ plasma. UV–vis and fluorescence spectrometry measurements indicated that the light absorption and fluorescent emission were improved on the hierarchically patterned P3HT films, which can be utilized to enhance the efficiencies of organic solar cells. Furthermore, this simple versatile method based on the solvent swelling‐induced crease as the in‐situ recoverable template has been extended to pattern other spin‐coated films with different compositions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 928–939     

Vinyl monomers bearing chromophore moieties and their polymers. VIII. synthesis and fluorescence behavior of a vinyloxy monomer having an electron‐accepting chromophore moiety,p‐((vinyloxy)methyl)benzonitrile,and its polymers

A vinyloxy monomer having an electron‐accepting chromophore moiety, p‐((vinyloxy)methyl)benzonitrile (VOMBN), was synthesized by reaction of p‐(hydroxymethyl)benzonitrile with ethyl vinyl ether (EVE) in the presence of mercuric acetate. VOMBN can easily be cationically homopolymerized and copolymerized with EVE by using Lewis acids such as boron trifluoride etherate (BF₃ · OEt₂) as a catalyst and radically copolymerized with maleic anhydride (MAn) using AIBN as an initiator. The fluorescence behaviors of VOMBN, its copolymer P(VOMBN‐co‐MAn), and its saturated model compound p‐(ethoxymethyl)benzonitrile (EOMBN) were investigated in acetonitrile. It has been found that the fluorescence intensity of VOMBN is much lower than its copolymer and EOMBN at the same chromophore concentration. A fluorescence “structural self‐quenching effect” (SSQE) is also observed for VOMBN as we have reported previously [Li, F. M.; Chen, S. J.; Li, Z. C.; Qiu, J. J Polym Sci Polym Chem 1996, 34, 1881]. This phenomenon has been attributed to the inter‐ and intramolecular charge transfer interaction between the electron‐accepting cyanophenyl chromophore and the electron‐donating vinyloxy group in the same molecule. The dependence of the fluorescence intensity of VOMBN on solvents of different viscosities is evidence that the SSQE of VOMBN mainly occurs intramolecularly. The fluorescence of EOMBN and P(VOMBN‐co‐MAn) was quenched by a series of electron‐rich vinyloxy compounds which do not have chromophore moieties, such as dihydrofuran (2H‐furan), dihydropyran (2H‐pyran), furan, and EVE. It is observed that the higher the electron‐donating ability of the quenchers, the greater the quenching efficiency. P(VOMBN) and the random copolymers of VOMBN with EVE show broader fluorescence spectra as compared to the alternating copolymer P(VOMBN‐co‐MAn). This indicates that there is a mutual interaction between the adjacent cyanophenyl groups in P(VOMBN) and P(VOMBN‐co‐EVE), whereas such an interaction does not exist for P(VOMBN‐co‐MAn) in which the cyanophenyl groups are isolated by the rigid succinic anhydride rings. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 179–187, 1999     

Cononsolvency of poly(N‐isopropylacrylamide) in methanol aqueous solution—insight by dielectric spectroscopy

Both water and methanol are good solvents for poly(N‐isopropylacrylamide) (PNIPAM), while PNIPAM does not dissolve in their mixed solvents, this phenomenon is called cononsolvency. Cononsolvency is closely related to many phenomena in life but so far, its mechanism is still controversial. In this work, the dielectric behavior of PNIPAM methanol aqueous solution was studied in the frequency of 40Hz–40GHz. From lower frequency to higher frequency, four relaxations were found. They are, respectively, from global chain motion, local motion of backbone, motion of side chain group, and the dipole orientation of the solvent molecule. The solvent dependence of dielectric parameters for the chain motion implied that the PNIPAM chain has undergone the coil‐globule‐coil transition. Dielectric analysis to microwave frequency showed that the volume of the bound solvent units on PNIPAM chain increases with the increasing methanol concentration, which suggested that the structure of solvation units bound on PNIPAM side chains undergo a changing process experience from water to water‐methanol cluster to the ternary methanol cluster. This work reveals the structure and dynamics of the PNIPAM chain and the solvent unit that involved in the solvation of PNIPAM, and provides some new insight into the cononsolvency phenomenon. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1227–1234     

Poly(perylene‐alt‐phenyleneethynylene)s with multiple pendant ester groups in various lengths: Synthesis,photophysics and selective hydrolysis

Five fluorescence polymers with poly(perylene‐alt‐phenyleneethynylene)s (PPPEs) backbone and multiple side chains containing ester‐groups were synthesized via Sonogashira coupling reaction. These polymers were soluble in common organic solvents to form red‐orange solution. The polymer powders had dark red color. The absorption/emission spectra of these polymers were similar, with absorption bands between 300 and 600 nm and an emission peak between 520 and 700 nm. Furthermore, the ester groups of the side chains were partially or completely hydrolyzed, resulting in the fluorescence PPPEs with tunable density of carboxylic acid functional groups on the polymer chains as interaction/reaction sites for further applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1880–1886     

Synthesis and properties of through‐space conjugated polymers based on cyano‐substituted poly(p‐arylenevinylene)s

New through‐space cyano‐substituted poly(p‐arylenevinylene)s containing a [2.2]paracyclophane unit were synthesized by the Knoevenagel reaction. Polymers 5 and 7 have cyano groups at α‐positions and β‐positions from the dialkoxyphenylene unit, respectively. Their optical and electrochemical behaviors were investigated in detail in comparison with their model compounds. Polymers 5 and 7 exhibited through‐space conjugation via the cyclophane units. Polymer 5 showed greenish blue emission (λ_max = 477 nm) in diluted solution with fluorescence quantum efficiency (?_F) of only 0.007, whereas polymer 7 emitted in the bluish green region (λ_max = 510 nm) with ?_F of 0.32. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5979–5988, 2009     

Synthesis and characterization of novel germanium‐containing poly(p‐phenylenevinylene) derivatives

Novel blue‐emitting germanium‐containing poly(p‐phenylenevinylene) (PPV) derivatives with well‐defined conjugation lengths were synthesized via Wittig‐condensation polymerizations. The polymers can be color‐tuned by the introduction of various chromophores into the PPV‐based polymer backbones. The photoluminescence (PL) spectra of the polymers, GePVK (containing carbazole moieties), GeMEH (containing dialkoxybenzene moieties), and GePTH (containing phenothiazine moieties), were found to exhibit blue, greenish blue, and green emissions, respectively. GePTH produces more red‐shifted emission than GeMEH and GEPVK, resulting in green emission, and the solution and solid state PL spectra of GePVK consist of almost blue emission. The electroluminescence spectra of GeMEH and GePTH contain yellowy green and yellow colors, respectively. Interestingly, GePVK exhibits white emission with CIE coordinates of (0.33, 0.37) due to electroplex emission in the light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 979–988, 2008     

In situ grazing incidence small‐angle X‐ray scattering study of solvent vapor annealing in lamellae‐forming block copolymer thin films: Trade‐off of defects in deswelling

Solvent vapor annealing (SVA) is one route to prepare block copolymer (BCP) thin films with long‐range lateral ordering. The lattice defects in the spin‐coated BCP thin film can be effectively and rapidly reduced using SVA. The solvent evaporation after annealing was shown to have a significant impact on the in‐plane ordering of BCP microdomains. However, the effect of solvent evaporation on the out‐of‐plane defects in BCPs has not been considered. Using grazing‐incidence x‐ray scattering, the morphology evolution of lamellae‐forming poly(2‐vinlypyridine)‐b‐polystyrene‐b‐poly(2vinylpyridine) triblock copolymers, having lamellar microdomains oriented normal to substrate surface during SVA, was studied in this work. A micelle to lamellae transformation was observed during solvent uptake. The influence of solvent swelling ratio and solvent removal rate on both the in‐plane and out‐of‐plane defect density was studied. It shows that there is a trade‐off between the in‐plane and out‐of‐plane defect densities during solvent evaporation. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 980–989     

Efficient energy transfer between amphiphilic dendrimers with oligo(p‐phenylenevinylene) core branches and oligo(ethylene oxide) termini in micelles

The efficient fluorescence resonance energy transfer (FRET) between amphiphilic dendrimers with oligo(p‐phenylenevinylene) core branches and oligo(ethylene oxide) termini have been observed in micelles. All dendrimers show the critical micelle concentration and lower critical solution temperature as well as fluorescent emission. Tailoring electronic structures of the conjugated amphiphiles for FRET have been conveniently achieved by varying the branch number and/or the conjugated core structure. The Stern‐Volmer constants (K_SV) for FRET were found to be 4.51 × 10^?5 and 8.78 × 10^?5 M for Den 30–40 and Den 50–40, respectively. The effects external stimuli such as solvent and temperature on FRET have been also investigated. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photoresponsive and fluorescence behaviors of azobenzene‐containing amphiphilic block copolymers

The effects of solvency and mole fraction of azobenzene moieties (f_PAzoMA) on the photoresponsive and fluorescence behaviors of poly(acrylic acid)‐block‐poly(6‐[4‐(4′‐methoxyphenylazo)phenoxy]hexyl methacrylate) (PAA‐PAzoMA) amphiphilic diblock copolymers were investigated using UV–vis spectroscopy and fluorescence spectroscopy. The photoresponsive behavior depended strongly on the solvency and f_PAzoMA. When dissolved in a PAA‐selective solvent, PAA‐PAzoMA formed micelles with PAzoMA in the micelle core. The confinement of azobenzene moieties caused a steric hindrance, thereby markedly reducing the kinetics of photoisomerization compared with that of the unconfined PAA‐PAzoMA in a nonselective solvent. Additionally, PAA‐PAzoMA dissolved in the PAA‐selective solvent caused a blue shift of the maximum absorbance, suggesting the formation of H‐aggregates of azobenzene mesogens. The high H‐aggregate content substantially reduced the fluorescence emission. Consequently, the fluorescence emission of PAA‐PAzoMA in the nonselective solvent was more intense than that in the PAA‐selective solvent. Upon UV irradiation, the enhanced bent‐shaped cis isomers disturbed the compact packing of azobenzene mesogens, which substantially enhanced the fluorescence emission. Both the photoisomerization rate and fluorescence emission decreased with an increase in f_PAzoMA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 793–803     

Temperature‐dependent self‐assembly and rheological behavior of a thermoreversible pmma–PnBA–PMMA triblock copolymer gel

Self‐assembly and mechanical properties of triblock copolymers in a mid‐block selective solvent are of interest in many applications. Herein, we report physical assembly of an ABA triblock copolymer, [PMMA–Pn BA–PMMA] in two different mid‐block selective solvents, n‐butanol and 2‐ethyl‐1‐hexanol. Gel formation resulting from end‐block associations and the corresponding changes in mechanical properties have been investigated over a temperature range of ?80 °C to 60 °C, from near the solvent melting points to above the gelation temperature. Shear‐rheometry, thermal analysis, and small‐angle neutron scattering data reveal formation and transition of structure in these systems from a liquid state to a gel state to a percolated cluster network with decrease in temperature. The aggregated PMMA end‐blocks display a glass transition temperature. Our results provide new understanding into the structural changes of a self‐assembled triblock copolymer gel over a large length scale and wide temperature range. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 877–887