Synthese,Struktur und Reaktivität von η1und η3‐Allyl‐Rhenium‐Carbonylen

Synthesis, Structure, and Reactivity of η¹‐ and η³‐Allyl Rhenium Carbonyls In (η³‐C₃H₅)Re(CO)₄ one CO ligand can be substituted by PPh₃, pyridine, isocyanide and benzonitrile. With 1,2‐bis(diphenylphosphino)ethylene, 1,1′‐bis(diphenylphosphino)ferrocene and 1,2‐bis(4‐pyridyl)ethane dinuclear ligand bridged complexes are obtained. The η³‐η¹ conversion of the allyl ligand occurs on reaction of (η³‐C₃H₅)Re(CO)₄ with the bidendate ligands 1,2‐bis(diphenylphosphino)ethane and 1,3‐bis(diphenylphosphino)propane and with 2,2′‐bipyridine (L–L) which gives the complexes (η¹‐C₃H₅)Re(CO)₃(L–L). By reaction of (η³‐C₃H₅)Re(CO)₄ with bis(diphenylphosphino)methane the allyl group is protonated and under elemination of propene the complex (OC)₃Re(Ph₂PCHPPh₂)(η¹‐Ph₂PCH₂PPh₂) ( 19 ) with a diphosphinomethanide ligand is formed. On heating solutions of (η³‐C₃H₅)Re(CO)₄ and (η³‐C₃H₅)Re(CO)₃(CN‐2,5‐Me₂C₆H₃) ( 5 ) in methanol the methoxy bridged compounds Re₄(CO)₁₂(OH)(OMe)₃ and Re₂(CO)₄(CN‐2,5‐Me₂C₆H₃)₄(μ‐OMe)₂ ( 20 ) were isolated. The crystal structures of (η³‐C₃H₅)Re(CO)₃(CNCH₂SiMe₃) ( 4 ), [(η³‐C₃H₅)(OC)₃Re]₂‐ (μ‐bis‐(diphenylphosphino)ferrocene) ( 8 ), (η¹‐C₃H₅)Re(CO)₃‐ (bpy) ( 14 ), of 19 , 20 and of (OC)₃Re‐[Ph₂P(CH₂)₃PPh₂]Cl ( 16 ) were determined by X‐ray diffraction.     

μ‐1,2‐Bis(4‐pyridyl)ethene‐κ2N:N′‐bis(tetraaqua­{4‐[2‐(4‐pyridinio)­ethenyl]pyridine‐κN}cobalt(II)) hexaaqua­cobalt(II) tetrakis(sulfate) octahydrate

The title compound, [Co₂(C₁₂H₁₁N₂)₂(C₁₂H₁₀N₂)(H₂O)₈][Co(H₂O)₆](SO₄)₄·8H₂O, consists of bis(4‐pyridyl)ethenedicobalt(II) cations, hexaaqua­cobalt cations, sulfate anions and water solvent molecules that are linked by hydrogen bonds into a network structure. In the hexaaquacobalt cation, the six water molecules are coordinated in an octahedral geometry to the Co atom, which lies on an inversion centre. The other cation is a 1,2‐bis(4‐pyridyl)ethene‐bridged centrosymmetric dimer, consisting of protonated 1,2‐bis(4‐pyridyl)­ethene cations, a bridging 1,2‐bis(4‐pyridyl)ethene ligand and tetraaqua­cobalt cations. Each Co atom is six‐coordinated by four water molecules and two N atoms from a protonated 1,2‐bis(4‐pyridyl)ethene cation and the bridging 1,2‐bis(4‐pyridyl)­ethene ligand, and the geometry around each Co atom is octahedral.     

New organotin supramolecular complexes based on copper cyanide and auxiliary N‐donor ligands as potent inhibitors of cancer cell lines: In vitro and antioxidant experiments

The new synthesized supramolecular complexes (SC); [Cu₂(CN)₄(Et₃Sn)₂(tbpe)], 1 and [Cu₂(CN)₃(Et₃Sn)(bpe)], 2 (tbpe = trans‐1,2‐bis(4‐pyridyl)ethene and bpe = 1,2‐bis(4‐pyridyl)ethane), were characterized by elemental analyses, electrical conductance, spectroscopic studies and thermal analyses. UV–Vis spectra and magnetic moment data suggested the tetrahedral geometry around Cu(I) atoms. The structures of the SC 1 and 2 were also theoretically studied using molecular mechanics (MM+). The structures were minimized with a semi‐empirical (PM3) method. The organotin compounds represent significant advances in the clinical management of some cancer cell lines. 1 and 2 were tested as inhibitors and their citotoxicities showed potent growth inhibitory activity for hepatocellular carcinoma HePG‐2, mammary gland breast cancer MCF‐7, human prostate cancer PC3 and Colorectal carcinoma HCT‐116 cell lines. The tested compounds showed high inhibitory anti‐oxidant activity either using erythrocyte hemolysis or ABTS method.     

Synthesis and Characterization of Dinuclear Ruthenium(II) Complexes Based on 4,4′‐Bipyridyl Type Bridging Ligands

The synthesis, spectroscopic, electrochemical and photophysical characterization of a series of dinuclear ruthenium(II) complexes of the type [(bpy)₂Ru(NnN)₂RuCl(bpy)₂](PF₆)₃, where NnN = 4,4′‐bipyridyl (N0N), 1,2‐bis(4‐pyridyl)ethylene (NEN), 1,2‐bis(4‐pyridyl)ethane (N2N), and 4,4′‐trimethylenedipyridine (N3N) are reported. The photophysical and electrochemical properties are discussed with particular emphasis on the ability of the bridging ligands to support intercomponent interaction.     

Reactions of Group 4 Metallocene Complexes with Mono‐ and Diphenylacetonitrile: Formation of Unusual Four‐ and Six‐Membered Metallacycles

Reactions of Group 4 metallocene alkyne complexes [Cp′₂M(η²‐Me₃SiC₂SiMe₃)] ( 1 : M=Zr, Cp′=Cp*=η⁵‐pentamethylcyclopentadienyl; 2 a : M=Ti, Cp′=Cp*, and 2 b : M=Ti, Cp′₂=rac‐(ebthi)=rac‐1,2‐ethylene‐1,1′‐bis(η⁵‐tetrahydroindenyl)) with diphenylacetonitrile (Ph₂CHCN) and of the seven‐membered zirconacyclocumulene 3 with phenylacetonitrile (PhCH₂CN) were investigated. Different compounds were obtained depending on the metal, the cyclopentadienyl ligand and the reaction temperature. In the first step, Ph₂CHCN coordinated to 1 to form [Cp*₂Zr(η²‐Me₃SiC₂SiMe₃)(NCCHPh₂)] ( 4 ). Higher temperatures led to elimination of the alkyne, coordination of a second Ph₂CHCN and transformation of the nitriles to a keteniminate and an imine ligand in [Cp*₂Zr(NC₂Ph₂)(NCHCHPh₂)] ( 5 ). The conversion of 4 to 5 was monitored by using ¹H NMR spectroscopy. The analogue titanocene complex 2 a eliminated the alkyne first, which led directly to [Cp*₂Ti(NC₂Ph₂)₂] ( 6 ) with two keteniminate ligands. In contrast, the reaction of 2 b with diphenylacetonitrile involved a formal coupling of the nitriles to obtain the unusual four‐membered titanacycle 7 . An unexpected six‐membered fused zirconaheterocycle ( 8 ) resulted from the reaction of 3 with PhCH₂CN. The molecular structures of complexes 4 , 5 , 6 , 7 and 8 were determined by X‐ray crystallography.     

[B(O–C6H4–CN)4]– based Silver and Copper Coordination Polymers

A series of new coordination polymers bearing the [B(O–C₆H₄–CN)₄]^– anion was synthesized. Two new, one dimensional coordination frameworks of the type M[B(O–C₆H₄–CN)₄] (M = Ag, Cu) were obtained by salt metathesis. The reactivity towards organic Lewis‐bases was studied. The reaction with bidentate ligands yielded two dimensional networks with the general formula [M(L)][B(O–C₆H₄–CN)₄] {L = 2,2′‐bipyridine, 4,4′‐bipyridine, 1,2‐bis(pyridyl)ethane, 1,4‐diazabicyclo[2.2.2]octane}. The synthesis, properties and single crystal structure are reported.     

Chiral Calcium–BINOL Phosphate Catalyzed Diastereo‐ and Enantioselective Synthesis of syn‐1,2‐Disubstituted 1,2‐Diamines: Scope and Mechanistic Studies

A highly enantioselective, chiral, Lewis acid calcium–bis(phosphate) complex, Ca[ 3 a ]_n, which catalyzes the electrophilic amination of enamides with azodicarboxylate derivatives 2 to provide versatile chiral 1,2‐hydrazinoimines 4 is disclosed. The reaction gives an easy entry to optically active syn‐1,2‐disubstituted 1,2‐diamines 6 in high yields with excellent enantioselectivities, after a one‐pot reduction of the intermediate 1,2‐hydrazinoimines 4 . The geometry and nature of the N‐substituent of the enamide affect dramatically both the reactivity and the enantioselectivity. Although the calcium–bis(phosphate) complex was a uniquely effective catalyst, the exact nature of the active catalytic species remains unclear. NMR spectroscopy and MS analysis of the various calcium complexes Ca[ 3 ]_n reveals that the catalysts exist in various oligomer forms. The present mechanistic study, which includes nonlinear effects and kinetic measurements, constitutes a first step in understanding these calcium–bis(phosphate) complex catalysts. DFT calculations were carried out to explore the mechanism and the origin of the enantioselectivity with the Ca[ 3 ]_n catalysts.     

Metallierung und C‐C‐Kupplung von 2‐Pyridylmethylamin: Synthese und Strukturen von Methylzink‐2‐pyridylmethylamid,Tris(trimethylsilyl)methylzink‐2‐pyridylmethylamid und (Z)‐1‐Amino‐1,2‐bis(2‐pyridyl)ethen

Metalation and C‐C Coupling Reaction of 2‐Pyridylmethylamine: Synthesis and Structures of Methylzinc‐2‐pyridylmethylamide, Tris(trimethylsilyl)methylzinc‐2‐pyridylmethylamide and (Z)‐1‐Amino‐1,2‐bis(2‐pyridyl)ethene The metalation of 2‐pyridylmethylamine with dimethylzinc yields methylzinc‐2‐pyridylmethylamide ( 1 ), which shows a dimer‐trimer equilibrium in solution. Compound 1 crystallizes trimeric with a Zn₃N₃‐cycle in boat conformation. The endocyclic Zn‐N distances vary between 202 and 206 pm. Heating of this compound in toluene in the presence of dimethylzinc leads to the precipitation of zinc metal and to the formation of a few crystals of bis—[methylzinc‐2‐pyridylmethylamido]‐N, N′‐bis(methylzinc)‐2,3,5,6—tetrakis(2‐pyridyl)‐1,4‐diazacyclohexane ( 2 ). The protolysis of this solution with acetamide gives yellowish (Z)‐1‐amino‐1,2‐dipyridylethene ( 3 ) in a rather poor yield. The enamine tautomer is stabilized by N‐H···N hydrogen bridges. The demanding tris(trimethylsilyl)methyl group at the zinc atom allows the isolation of the dimeric tris(trimethylsilyl)methylzinc‐2‐pyridylmethylamide (4) ₂ in good yield. A C‐C coupling reaction of this compound with dimethylzinc is not possible.     

Assembly of Three 2D Metal‐Organic Frameworks (MOFs) Derived from Flexible Ligands, 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene (3‐bpd) and/or 1,2‐bis(4‐pyridyl)ethane (dpe)

Three coordination polymers, {[Cd(3‐bpd)₂(NCS)₂]×C₂H₅OH}_n ( 1 ), {[Cd(3‐bpd)(dpe)(NO₃)₂]×(3‐bpd)}₂ ( 2 ), {[Cd(dpe)₂(NCS)₂]×3‐bpd×2H₂O}_n ( 3 ) (3‐bpd = 1,4‐bis(3‐pyridyl)‐2,3‐diaza‐1,3‐butadiene; dpe = 1,2‐bis(4‐pyridyl)ethane), were prepared and structurally characterized by a single‐crystal X‐ray diffraction method. In compound 1 , each Cd(II) ion is six‐coordinate bonded to six nitrogen atoms from four 3‐bpd and two NCS^? ligands. The 3‐bpd acts as a bridging ligand connecting the Cd(II) ion to generate a 2D layered metal‐organic framework (MOF) by using a rhomboidal‐grid as the basic building units with the 4⁴ topology. In compound 2 , the Cd(II) ion is also six‐coordinate bonded to four nitrogen atoms of two 3‐bpd, two dpe and two oxygen atoms of two NO₃^? ligands. The 3‐bpd and dpe ligands both adopt bis‐monodentate coordination mode connecting the Cd(II) ions to generate a 2D layered MOF by using a rectangle‐grid as the basic building units with the 4⁴ topology. In compound 3 , two crystallographically independent Cd(II) ions are both coordinated by four nitrogen atoms of dpe ligands in the basal plane and two nitrogen atom of NCS^? in the axial sites. The dpe acts as a bridging ligand to connect the Cd(II) ions forming a 2D interpenetrating MOFs by using a square‐grid as the basic unit with the 4⁴ topology. All of their 2D layered MOFs in compounds 1 ‐ 3 are then arranged in a parallel non‐interpenetrating ABAB—packing manner in 1 and 2 , and mutually interpenetrating manner in 3 , respectively, to extend their 3D supramolecular architectures with their 1D pores intercalated with solvent (ethanol in 1 or H₂O in 3 ) or free 3‐bpd molecules in 2 and 3 , respectively. The photoluminescence measurements of 1 ‐ 3 reveal that the emission is tentatively assigned to originate from π‐π* transition for 1 and 2 and probably due to ligand‐center luminescence for compounds 3 , respectively.     

Preparation and Characterization of a Novel Palladium Complex: cis‐Dichloride(1,2‐bis(diphenylphosphino)vinyl‐P,P′,C)palladium(II)‐(bis(diphenylphosphino)methane‐P,P′)cobaltacarbonyl

A novel palladium complex 4, cis‐dichloride(1,2‐bis(diphenylphosphino)vinyl‐P,P′,C)palladium(II)‐(bis(diphenylphosphino)methane‐P,P′)cobaltacarbonyl, was obtained and characterized from the treatment of [(μ‐Ph₂PCH₂PPh₂)Co₂(CO)₄][(Ph₂PC≡CPPh₂)‐PdCl₂] 3 with hydrochloric acid. The framework of 4 can be regarded as a grouping of two metal‐containing fragments: ‐Co(CO)₂(dppm) and PdCl2(μ‐P,P‐Ph₂PCH=C(‐)PPh₂).     

An unusual polycatenating network self‐assembled by the 2D → 2D parallel → 3D parallel interpenetration of coordinative and hydrogen‐bonded (6,3) motifs

In the title coordination compound, catena‐poly[[[bis[diaquacadmium(II)]‐μ₂‐trans‐1,2‐bis(4‐pyridyl)ethene]bis{μ₂‐2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetato}] trans‐1,2‐bis(4‐pyridyl)ethene solvate dihydrate], {[Cd₂(C₁₂H₁₀O₉)₂(C₁₂H₁₀N₂)(H₂O)₄]·C₁₂H₁₀N₂·2H₂O}_n, (I), each Cd^II centre adopts a pentagonal–bipyramidal coordination geometry. The incompletely deprotonated 2,2′‐[(5‐carboxymethoxy‐m‐phenylene)dioxy]diacetate (TCMB) ligands and trans‐1,2‐bis(4‐pyridyl)ethene (bpe) ligands both act as bidentate bridges, linking the Cd^II centres into one‐dimensional ladders, which are connected into an undulating two‐dimensional (6,3) layer through O—H...N hydrogen bonds between the carboxylate groups of the TCMB ligands and the N atoms of the uncoordinated bpe ligands. Each undulating layer polycatenates two other identical layers, exhibiting the unusual combination of both 2D → 2D parallel and 2D → 3D parallel interpenetration (2D and 3D are two‐ and three‐dimensional, respectively).     

Diselenastanna‐, ‐sila‐ and ‐carbacycles with an annelated dicarba‐closo‐dodecaborane(12) unit

The reactions of the 1,2‐diselenolato‐1,2‐dicarba‐closo‐dodecaborane(12) dianion 1 with diorganoelement(IV) dichlorides (Ph₂CCl₂, Me₂SiCl₂, Ph₂SiCl₂, Me₂SnCl₂, Ph₂SnCl₂) gave novel five‐member heterocycles along with other products. The molecular structures of the five‐member rings containing CPh₂ ( 2 ) and SnPh₂ ( 9 ) moieties between the selenium atoms were determined by X‐ray analyses. In the case of the chlorosilanes, the analogous five‐member ring containing the SiPh₂ unit ( 4 ) could be identified in mixtures. The expected reaction was accompanied by rearrangement leading to formation of another five‐member ring 6 containing the Ph₂Si? Se? Se moiety. Oxidative addition of the five‐member heterocycles containing tin ( 7, 9 ) to ethene‐bis(triphenylphosphane)platinum(0) gave at low temperature the bis(triphenylphosphane)platinum(II) complexes 12 and 13 , where the Pt(PPh₃)₂ fragment had been inserted into one of the Sn? Se bonds. Extensive decomposition of these complexes was observed above ? 20 °C. The proposed solution‐state structures of the new compounds are supported by multinuclear magnetic resonance data (¹H, ¹¹B, ¹³C, ²⁹Si, ³¹P, ⁷⁷Se, ¹¹⁹Sn and ¹⁹⁵Pt NMR). Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis,structure and biological activity of diorganotin derivatives with pyridyl functionalized bis(pyrazol‐1‐yl)methanes

Three pyridyl functionalized bis(pyrazol‐1‐yl)methanes, namely 2‐[(4‐pyridyl)methoxyphenyl] bis(pyrazol‐1‐yl)methane (L¹), 2‐[(4‐pyridyl)methoxyphenyl]bis(3,5‐dimethylpyrazol‐1‐yl)methane (L²) and 2‐[(3‐pyridyl)methoxyphenyl]bis(pyrazol‐1‐yl)methane (L³) have been synthesized by the reactions of (2‐hydroxyphenyl)bis(pyrazol‐1‐yl)methanes with chloromethylpyridine. Treatment of these three ligands with R₂SnCl₂ (R = Et, n‐Bu or Ph) yields a series of symmetric 2:1 adducts of (L)₂SnR₂Cl₂ (L = L¹, L² or L³), which have been confirmed by elemental analysis and NMR spectroscopy. The crystal structures of (L²)₂Sn(n‐Bu)₂Cl₂·0.5C₆H₁₄ and (L³)₂SnEt₂Cl₂ determined by X‐ray crystallography show that the functionalized bis(pyrazol‐1‐yl)methane acts as a monodentate ligand through the pyridyl nitrogen atom, and the pyrazolyl nitrogen atoms do not coordinate to the tin atom. The cytotoxic activity of these complexes for Hela cells in vitro was tested. Copyright © 2010 John Wiley & Sons, Ltd.     

Tuning the Gate‐Opening Pressure in a Switching pcu Coordination Network,X‐pcu‐5‐Zn,by Pillar‐Ligand Substitution

Coordination networks that reversibly switch between closed and open phases are of topical interest since their stepped isotherms can offer higher working capacities for gas‐storage applications than the related rigid porous coordination networks. To be of practical utility, the pressures at which switching occurs, the gate‐opening and gate‐closing pressures, must lie between the storage and delivery pressures. Here we study the effect of linker substitution to fine‐tune gate‐opening and gate‐closing pressure. Specifically, three variants of a previously reported pcu ‐topology MOF, X‐pcu‐5‐Zn , have been prepared: X‐pcu‐6‐Zn , 6 =1,2‐bis(4‐pyridyl)ethane (bpe), X‐pcu‐7‐Zn , 7 =1,2‐bis(4‐pyridyl)acetylene (bpa), and X‐pcu‐8‐Zn , 8 =4,4′‐azopyridine (apy). Each exhibited switching isotherms but at different gate‐opening pressures. The N₂, CO₂, C₂H₂, and C₂H₄ adsorption isotherms consistently indicated that the most flexible dipyridyl organic linker, 6 , afforded lower gate‐opening and gate‐closing pressures. This simple design principle enables a rational control of the switching behavior in adsorbent materials.     

Monomeric Homoleptic (2‐Pyridylmethyl)(tert‐butyldimethylsilyl)amido Complexes of the Divalent Metals Mg,Mn, Fe,Co, and Zn

The transamination reaction of M[N(SiMe₃)₂]₂ with (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amine yields the corresponding homoleptic metal bis[(2‐pyridylmethyl)(tert‐butyldimethylsilyl)amides] of Mg ( 1 ), Mn ( 2 ), Fe ( 3 ), Co ( 4 ) and Zn ( 5 ). All these compounds crystallize from hexane isotypic in the space group C2/c. From toluene the zinc derivative precipitates as toluene solvate 5 ·toluene. The molecular structures of these compounds are very similar with large NMN angles to the amide nitrogen atoms with NMN values of 148° ( 1 ) and 150° ( 5 ) for the diamagnetic compounds and 156° for the paramagnetic derivatives 2 and 3 . The Co derivative 4 displays a rather small NCoN angle of 142°. Different synthetic routes have been explored for compound 3 which is also available via the metallation reaction of bis(2,4,6‐trimethylphenyl)iron with (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amine and via the metathesis reaction of lithium (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amide with [(thf)₂FeCl₂]. In course of the metathesis reaction, an equimolar amount of lithium (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amide and [(thf)₂FeCl₂] yields heteroleptic (2‐pyridylmethyl)(tert‐butyldimethylsilyl)amido iron(II) chloride ( 6 ) which crystallizes as a centrosymmetric dimeric molecule. The oxidative C‐C coupling reaction of 5 with Sn[N(SiMe₃)₂]₂ leads to the formation of tin(II) 1,2‐bis(2‐pyridyl)‐1,2‐bis(tert‐butyldimethylsilylamido)ethane, tin metal and Zn[N(SiMe₃)₂]₂.     

Tuning the Gate‐Opening Pressure in a Switching pcu Coordination Network,X‐pcu‐5‐Zn,by Pillar‐Ligand Substitution

Coordination networks that reversibly switch between closed and open phases are of topical interest since their stepped isotherms can offer higher working capacities for gas‐storage applications than the related rigid porous coordination networks. To be of practical utility, the pressures at which switching occurs, the gate‐opening and gate‐closing pressures, must lie between the storage and delivery pressures. Here we study the effect of linker substitution to fine‐tune gate‐opening and gate‐closing pressure. Specifically, three variants of a previously reported pcu ‐topology MOF, X‐pcu‐5‐Zn , have been prepared: X‐pcu‐6‐Zn , 6 =1,2‐bis(4‐pyridyl)ethane (bpe), X‐pcu‐7‐Zn , 7 =1,2‐bis(4‐pyridyl)acetylene (bpa), and X‐pcu‐8‐Zn , 8 =4,4′‐azopyridine (apy). Each exhibited switching isotherms but at different gate‐opening pressures. The N₂, CO₂, C₂H₂, and C₂H₄ adsorption isotherms consistently indicated that the most flexible dipyridyl organic linker, 6 , afforded lower gate‐opening and gate‐closing pressures. This simple design principle enables a rational control of the switching behavior in adsorbent materials.     

Control of Light‐Promoted [2+2] Cycloaddition Reactions by a Remote Ancillary Regulatory Group That Is Covalently Attached to Rhenium Rectangles

The high‐yielding self‐assembly of three neutral rhenium(I) rectangles, [Re₂(CO)₆(L)(bpe)]₂ ( 1 a , L=2,2′‐biimidazolate (biim); 1 b , L=2,2′‐bisbenzimidazolate (bbim); 1 c , L=2,2′‐bis(4,5‐dimethylimidazolate) (bdmim); bpe=trans‐1,2‐bis(4‐pyridyl)ethylene), under hydrothermal conditions is described. The rectangles were structurally characterized by spectroscopic techniques and further confirmed by single‐crystal X‐ray diffraction. Upon irradiation with a Hg lamp at 365 nm, the bpe ligands of rectangles 1 a and 1 b underwent [2+2] photocycloaddition reactions to produce [{(Re(CO)₃)₂L}₂(4,4′‐tpcb)₂] ( 2 a , L=biim; 2 b , L=bbim; 4,4′‐tpcb=1,2,3,4‐tetrakis(4‐pyridyl)cyclobutane) through a single‐crystal‐to‐single‐crystal (SCSC) transformation. However, rectangle 1 c , which contained methyl groups on the 2,2′‐biimidazolate ligand, failed to undergo cycloaddition, even after prolonged irradiation. This result indicates that the light‐induced cycloaddition reaction can be preferentially controlled by the remote regulatory substituents, which are attached onto the same backbone of the rectangle complex. This transformation is the first reported utilization of a remote ancillary regulatory ligand that is covalently attached onto a coordination compound to control the [2+2] cycloaddition reaction.     

Remarkable Shape‐Sustaining,Load‐Bearing,and Self‐Healing Properties Displayed by a Supramolecular Gel Derived from a Bis‐pyridyl‐bis‐amide of L‐Phenyl Alanine

A series of bis‐amides decorated with pyridyl and phenyl moieties derived from L ‐amino acids having an innocent side chain (L ‐alanine and L ‐phenyl alanine) were synthesized as potential low‐molecular‐weight gelators (LMWGs). Both protic and aprotic solvents were found to be gelled by most of the bis‐amides with moderate to excellent gelation efficiency (minimum gelator concentration=0.32–4.0 wt. % and gel–sol dissociation temperature T_gel=52–110 °C). The gels were characterized by rheology, DSC, SEM, TEM, and temperature‐variable ¹H NMR measurements. pH‐dependent gelation studies revealed that the pyridyl moieties took part in gelation. Structure–property correlation was attempted using single‐crystal X‐ray and powder X‐ray diffraction data. Remarkably, one of the bis‐pyridyl bis‐amide gelators, namely 3,3‐Phe (3‐pyridyl bis‐amide of L ‐phenylalanine) displayed outstanding shape‐sustaining, load‐bearing, and self‐healing properties.     

Influence of Secondary Bonds on the Network Assembly and Property in Lead(II) 3‐Sulfobenzoate Coordination Polymer

A unique 3‐D Pb^II coordination polymer containing ligands 1,2‐bis(4‐pyridyl)ethylene (bpe) and 3‐sulfobenzoate (3‐sb), [Pb(3‐sb)(bpe)_0.5]_n ( 1 ) has been synthesized by hydrothermal reaction and characterized by elemental analysis, IR, TGA, ¹H NMR, powder X‐ray analysis, and fluorescent spectrum. The single‐crystal X‐ray analysis shows that eight coordination bonds can be divided as five primary bonds and three secondary bonds. The secondary bonds largely enhance the solid stability and provide a high‐dimensional network assembly. The complex also displays strong fluorescent property.     

Synthesis and characterization of transition metal complexes of thiophene‐2‐methylamine: X‐ray crystal structure of palladium (II) and platinum (II) complexes and use of palladium(II) complexes as pre‐catalyst in Heck and Suzuki cross‐coupling reactions

The reactions of thiophene‐2‐(N‐diphenylphosphino)methylamine, Ph₂PNHCH₂‐C₄H₃S, 1 and thiophene‐2‐[N,N‐bis(diphenylphosphino)methylamine], (Ph₂P)₂NCH₂‐C₄H₃S, 2, with MCl₂(cod) (M = Pd, Pt; cod = 1,5‐cyclooctadiene) or [Cu(CH₃CN)₄]PF₆ yields the new complexes [M(Ph₂PNHCH₂‐C₄H₃S)₂Cl₂], M = Pd 1a, Pt 1b, [Cu(Ph₂PNHCH₂‐C₄H₃S)₄]PF₆, 1c, and [M(Ph₂P)₂NCH₂‐C₄H₃S)Cl₂], M = Pd 2a, Pt 2b, {Cu[(Ph₂P)₂NCH₂‐C₄H₃S]₂}PF₆, 2c, respectively. The new compounds were isolated as analytically pure crystalline solids and characterized by ³¹P‐, ¹³C‐, ¹H‐NMR and IR spectroscopy and elemental analysis. Furthermore, the solid‐state molecular structures of representative palladium and platinum complexes of bis(phosphine)amine, 2a and 2b, respectively, were determined using single crystal X‐ray diffraction analysis. The palladium complexes were tested as potential catalysts in the Heck and Suzuki cross‐coupling reactions. Copyright © 2009 John Wiley & Sons, Ltd.