基于聚硫堇/亚甲基蓝和纳米金放大的免疫传感器检测贝类毒素大田软海绵酸

采用聚硫堇(PTH)修饰电极为传感界面提供一个生物修饰功能基质膜,借助纳米金(GNPs)的导电性、生物相容性与高比表面积特性实现抗体的有效固定,并以亚甲基蓝(MB)为电子媒介加速电极表面电化学反应的电子传递,构建了一种高灵敏的非标记电化学免疫传感器,用于贝类毒素大田软海绵酸(OA)的检测。当分子结构中含有羧基和酚基的OA与其抗体特异性结合后,生成以阴离子形式存在的抗原-抗体复合物,阻碍了传感器表面电子的传递,导致峰电流下降。利用免疫反应前后峰电流的变化,可对OA进行特异性识别和准确定量。在优化实验条件下,OA浓度的对数在0.2~100μg/L范围内与其峰电流的变化值(ΔI)呈线性相关,线性方程为ΔI=1.721 7+1.083 6lgρ,相关系数为0.992 0,检出限为0.1μg/L。该免疫传感器重现性好、特异性强,用于实际贝类样品的测定,回收率为85.3%~112%。     

石墨烯-壳聚糖复合物修饰电极构建电化学免疫传感器对1-芘丁酸的检测研究

采用石墨烯(GS)和壳聚糖(CS)复合膜修饰玻碳电极(GS-CS/GCE),利用1-乙基-(3-二甲基氨基丙基)碳二亚胺盐酸盐(EDC)和N-羟基丁二酰亚胺(NHS)(4∶1)活化GS-CS/GCE,共价固定多环芳烃抗体(anti-PAHs),构建灵敏度高、稳定性好的非标记电流型免疫传感器,用于1-芘丁酸(PBA)的检测。运用扫描电子显微镜对GS-CS复合膜的形貌进行表征。在pH 7.0含10 mmol/L K3Fe(CN)6和0.1 mmol/L KCl的磷酸盐溶液中,通过循环伏安法和示差脉冲伏安法研究修饰电极表面的电化学性质,并考察了免疫传感器的电化学性能。研究表明,由于石墨烯和壳聚糖的协同作用,GS-CS修饰的玻碳电极在Fe(CN)64-/3-溶液中的峰电流明显增大,有利于提高免疫传感器的灵敏度。在优化实验条件下,电极表面的anti-PAHs抗体固定量显著提高,增强了电极的分子识别性能。由于anti-PAHs抗体-抗原结合物的导电性较差,免疫传感器的峰电流随着待测溶液中PBA浓度的增大而减小,PBA浓度在0.1～80μg/L范围内呈良好的线性关系,检出限为0.03μg/L。该免疫传感器重现性好、特异性强,用于实际样品的测定,回收率为90%～105%。     

基于包被包膜糖蛋白抗体纳米金磁性微粒的无试剂安培免疫传感器

在玻碳电极(GCE)表面固定对H2O2有催化还原活性的富马酸二甲酯联吡啶铜(GCE|CuL);再在GCE|CuL表面修饰一层金磁微粒-壳聚糖复合膜(nano Au/Fe3O4/Chit), 进而固定艾滋病毒(HIV)诊断标志物--包膜糖蛋白(gp160)抗体(anti gp160), 由此构建了一类快速检测 gp160的无试剂安培免疫传感器.当该传感器在含gp160溶液中37 ℃下温育30 min后, 传感器表面生成的免疫复合物随gp160浓度的增大而增加, 导致CuL 对H2O2 电催化还原效果降低, 催化电流呈现下降趋势.在PBS溶液(pH 7.0)和-300 mV下, 催化电流的降低值ΔIo与gp160浓度在1～400 μg/L 呈线性关系; 检出限为0.5 μg/L(3σ).研制的免疫传感器检测gp160时, 一步免疫反应即可得结果, 较相同条件下包被gp160抗体的纳米金单分子层修饰电极灵敏度更高, 检测范围更宽, 有望用于艾滋病人血清标志物gp160快速筛测.     

基于透明质酸及硫堇层层自组装的前列腺特异性抗原免疫传感器的研究

将带负电荷的透明质酸(HA)和带正电荷的电子媒介体硫堇(Thi)层层自组装到壳聚糖修饰的玻碳电极表面,利用硫堇上的氨基固定纳米金(nano-Au)并固载前列腺特异性抗体(anti-PSA),制得新型前列腺特异性抗原电流型免疫传感器。通过循环伏安法(CV)、微分脉冲伏安法(DPV)考察了该免疫传感器的电化学特性,并对影响该免疫传感器性能的各种因素进行详细研究。在优化实验条件下,此免疫传感器的线性范围为0.5~4μg/L和4~25μg/L,检出限为0.2μg/L。该免疫传感器具有制备简单、灵敏度高、稳定性好等优点。     

基于Fe3O4@Au磁性纳米粒子修饰丝网印刷电极的微囊藻毒素免疫传感器研究

将核壳型Fe3O4@Au磁性纳米粒子修饰在丝网印刷工作电极表面,再通过纳米金和微囊藻毒素-(亮氨酸-精氨酸)抗体(anti-MCLR)之间的吸附作用,将抗体固定于电极表面,以牛血清白蛋白(BSA)封闭非特异性吸附位点,制得了检测MCLR的电流型免疫传感器。该传感器基于直接竞争的免疫分析模式,以辣根过氧化物酶偶联的微囊藻毒素(MCLR-HRP)为标记物,用差分脉冲伏安法检测微囊藻毒素,在优化的实验条件下,此免疫传感器响应的峰电流值与微囊藻毒素浓度在0.79～12.9μg/L范围内呈良好的线性关系,检测限为0.38μg/L。对实际水样进行了微囊藻毒素的加标回收实验,回收率在95%～107%之间。此免疫传感器具有测定速度快、灵敏高、携带方便等优点。     

免标型沙丁胺醇免疫电化学传感器

构建了以茜素为探针,二氧化钛掺杂乙炔黑和壳聚糖复合材料为信号放大平台的新型免标型沙丁胺醇免疫传感器。于修饰电极的表面电沉积金纳米粒子,实现沙丁胺醇抗体的固定并进一步增大电流响应。采用扫描电子显微镜(SEM)对材料进行表征,循环伏安法(CV)和电化学阻抗谱图(EIS)对修饰电极的构建过程及传感器的性能进行电化学表征。采用差分脉冲伏安法(DPV)检测茜素在修饰电极表面的峰电流值,不同浓度的沙丁胺醇(SAL)抗原与抗体发生免疫亲和反应后,该峰电流值随着沙丁胺醇浓度的增大而减小,并呈线性关系,据此建立峰电流值与沙丁胺醇浓度的关系并实现了对沙丁胺醇的定量检测。探究了缓冲溶液p H值、孵化温度和孵化时间对免疫传感器的影响。在最佳条件下,该免疫传感器对沙丁胺醇的线性响应范围为1.0~100μg/L,检出限(LOD)为0.67μg/L(3σ/k)。该免疫传感器具有良好的重现性、选择性和稳定性,已成功用于猪饲料和猪肉样品中沙丁胺醇的检测,加标回收率分别为100.2%~102.4%(相对标准偏差为1.9%~4.7%)和97.5%~103.3%(相对标准偏差为2.1%~3.5%)。     

血清髓过氧化物酶电流型免疫传感器的研究

将Nafion吸附到玻碳电极表面,并通过静电吸附和共价键合作用将硫堇和纳米金层层自组装到Nafion修饰的电极表面,然后通过形成的纳米金单层吸附髓过氧化物酶(MPO)抗体,最后用辣根过氧化物酶(HRP)封闭电极上的非特异吸附位点,同时起到放大响应电流信号的作用,研制了一种检测MPO的新型电流型免疫传感器.实验结果表明,该免疫传感器对MPO的响应特性良好,其线性检测范围为2.5～100 μg/L; 检出限为1.425 μg/L,达到95%稳态响应时间<30 s,批间、批内的平均RSD(n=20) <2.94%和4.15%.电极的稳定性良好,在连续30 d内进行10次测量后,响应电流开始下降,平均测量值为初始的85.6%.探讨了抗体浓度、底物浓度、pH、温度及其它干扰物质等对该传感器的影响.使用本方法和经典的酶联免疫吸附实验(ELISA)同时对40份人血清标本MPO进行测试,结果表明: 两者相关性良好(r=0.9971, p<0.0001).该电流型免疫传感器具有灵敏度高、特异性好、不需标记和可以重复测量等优点.     

基于碳纳米管/L-半胱氨酸/Fe3O4@Au纳米复合材料的电流型甲胎蛋白免疫传感器的研究

将DMF(N,N-二甲基甲酰胺)分散的多壁碳纳米管(MWNT)修饰在金电极表面,再将修饰电极依次沉积纳米金和L-半胱氨酸(L-Cys),并通过半胱氨酸中的巯基吸附Fe3O4@Au纳米复合材料,再固载甲胎蛋白抗体(anti-AFP),以牛血清白蛋白(BSA)封闭非特异性吸附位点,构建了高灵敏、稳定的新型电流型甲胎蛋白免疫传感器。实验通过扫描透射电子显微镜(TEM)对DMF-MWNT和Fe3O4@Au复合纳米粒子进行了表征。在优化的实验条件下,此免疫传感器对甲胎蛋白抗原的检测范围为0.1～150μg/L,检出限为0.03μg/L。     

基于碳纳米管的脂质体电化学发光免疫传感器检测人免疫球蛋白G

将人免疫球蛋白G(hIgG)抗体固定在多壁碳纳米管修饰的玻碳电极表面,制备了一种电化学发光(ECL)免疫传感器.以hIgG抗体标记的联吡啶钌脂质体为标记物,采用三明治型检测方式,成功建立了hIgG的ECL免疫检测技术.电化学发光强度与hIgG的浓度在0.01～0.8 μg/L范围内呈良好的线性关系; 线性回归方程为y=618.7x(μg/L)-23.9(n=6,r=0.995); 检出限为0.004 μg/L.用于人血清中hIgG的检测,结果令人满意.     

基于新亚甲蓝为介体的免疫传感器的研究

利用共价键合法,将新亚甲蓝(NMB)与辣根过氧化酶(HRP)标记的羊抗小鼠IgG抗体(Ab)修饰于玻碳电极表面,制成一种新型的电流型免疫传感器。研究了该传感器对H2O2的电化学响应及对小鼠IgG抗原(m IgG)的免疫检测。结果表明NMB作为介体能有效地传递电子,测得电子转移系数为0.77,表观反应速率常数为1.18 s-1。利用传感器对m IgG的检测,线性范围为0.5~3μg/L;检出限为0.028μg/L;相关系数r为0.996。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.     

Copper-catalyzed multicomponent reactions of 2-iodoanilines,benzylamines, and elemental sulfur toward 2-arylbenzothiazoles

A relatively cheap copper salt-catalyzed, three-component approach providing 2-arylbenzothiazoles in good to excellent yields from readily available 2-iodoanilines, benzylamines, and sulfur powder is reported. This methodology allows preparation of various classes of 2-arylbenzothiazoles and provides a general, reliable approach.