„Ytterbiumdisulfid”︁: Eine Korrektur

?Ytterbiumdisulfide”?: A Correction The still open questions concerning preparation and crystal structure of ?Ytterbiumdisulfide”? could be answered now using new experimental results. The formerly investigated single crystals were not Yb^IIS₂ but BaS₂.     

Hopping conduction in “pure” polypropylene

A recently developed theory of steady-state conduction in high-density polyethylene is applied to “pure” polypropylene (PP) in the temperature range 50–93°C. Morphological changes occur in PP, including a disordered-amorphous to monoclinic-amorphous transition between 50 and 80°C, where, with increasing temperature T, free volume increases, and decreases with decreasing amorphous fraction. The latter competing processes lead to large increases in hopping site separation, λ, in the transition region, followed either by saturation or a maximum in λ vs. T. We speculate that segmental and/or main chain molecular motions lower apparent activation energies, are “pinned“ by applied field, and impeded by dangling bonds in regions surrounding the surfaces of crystallites. Our analysis is semi-quantitative only, because the latter mechanisms have not been adequately quantified, and the relative contributions of each are unknown. Measurements were carried out on heated and cooled disordered-amorphous, and 106°C, 17-h annealed, 43% crystalline samples. Hopping distances, obtained from measured current vs. applied field characteristics, ranged from 1.2 to 5.2 nm. Apparent activation energies up to 1.80 eV were obtained from In (I/T) vs. (1/T) plots. Remarkable plateaus in the temperature range of the transition were observed in these plots, implying some carrier conduction with near zero activation energy. Possible explanations for the latter, and the electronic nature of the carriers are given. X-ray and density flotation measurements enabled crystallinity determinations. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of star graft copolymers with asymmetric mixed “V‐shaped” side chains via “click” chemistry on a hyperbranched polyglycerol core

The star graft copolymers composed of hyperbranched polyglycerol (HPG) as core and well defined asymmetric mixed “V‐shaped” identical polystyrene (PS) and poly(tert‐butyl acrylate) as side chains were synthesized via the “click” chemistry. The V‐shaped side chain bearing a “clickable” alkyne group at the conjunction point of two blocks was first prepared through the combination of anionic polymerization of styrene (St) and atom transfer radical polymerization of tert‐butyl acrylate (tBA) monomer, and then “click” chemistry was conducted between the alkyne groups on the side chains and azide groups on HPG core. The obtained star graft copolymers and intermediates were characterized by gel permeation chromatography (GPC), GPC equipped with a multiangle laser‐light scattering detector (GPC‐MALLS), nuclear magnetic resonance spectroscopy and fourier transform infrared. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1308–1316, 2009     

Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Facile synthesis of polyester dendrimer via combining thio‐bromo “Click” chemistry and ATNRC

This article reports on developing an efficient synthesis approach to aliphatic polyester dendrimer, poly(thioglycerol‐2‐propionate) (PTP), by combination of thio‐bromo “Click” chemistry with atom transfer nitroxide radical coupling (ATNRC). Through the one‐pot two‐step method, linear polystyrene with hydroxyl end groups (l‐PS‐2OH) was obtained by first atom transfer radical polymerization of styrene and following termination using 4‐(2,3‐dihydroxypropoxy)‐TEMPO (DHP‐TEMPO) to capture the PS macroradicals via ATNRC method. Using l‐PS‐2OH as support, the dendritic repeating units divergently were grown from the hydroxyl end groups via esterification and thio‐bromo “Click” reaction two‐step process. In every generation, the resulting intermediates l‐PS‐d‐PTP (G1‐G4) can be easily isolated from the excessive unreacted monomers by simple precipitation in ethanol without help of time, labor and solvent consuming column chromatographic purification. At last, cleavage of the alkoxyamine group between the PS support and dendrimer at elevated temperature (125 °C) provided the targeted polyester dendrimer PTP up to the fourth generation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1762–1768     

On the applicability of the “abt” concept

Kaiser's “abt” concept rests on the experimental establishment of a linear relation between band width at half height, b_0.5, and capacity ratio, k, according to His column specification quantity, h_real, is dependent on the square of the slope a, obtained from a linear regression analysis based on this relation. It is shown in the present paper that an improvement of the experimental conditions leading to a lower extra-column contribution to band broadening, b, introduces a tendency towards a negative curvature in the plot at low k values. The mean slope increases, and an uncritical linear regression would yield an h_real-value which is higher than before and which would be in the opposite direction to the requirements of a reliable column specification. Generally the linear regression analysis has to be moved to higher k regions in cases of curvature, especially as it is also shown that h_real is an estimation of the traditional HETP value, H∞, that would be obtained when k approaches infinity. This theoretically expected relation is a strong motivation for the use of h_real as a column specification, since the b_0.5-value associated with H∞ is expected to be practically independent of b.     

The “disturbing zone” in overpressure layer chromatography (OPLC)

This paper describes the fundamental factors causing the “disturbing zone” in OPLC. This phenomenon of distorted substance zones appears when the OPLC separation is started with a dry layer and is due to interaction between the gas that is physically bound to the surface of the sorbent (m_a) and the gas molecules dissolved in the eluent (m_s). Possibilities for elimination of the adverse effects of disturbing zones ultimately depend on the establishment of operating conditions that inhibit their initial formation. Since modification of the location of the disturbing zone is only possible within a very narrow range, the sole solution to this problem is to conduct a pre-run, which may be carried out with hexane in the case of separation of apolar compounds. For separation of polar substances, the pre-run may also be performed with hexane or with a solvent of the mobile phase in which the components are unable to migrate. The selection of this solvent may be considered during the optimization of the eluent system.     

Synthesis of a Novel Oligoaniline: “Dumbbell‐Shaped” Oligoaniline

Summary: A new kind of aniline oligomer with a “dumbbell” shape was synthesized through a simple oxidative coupling reaction with a new rigid aromatic amine as starting material. The oligomer was characterized with mass spectrometry, IR and NMR spectroscopies. Its redox property was checked by cyclic voltammetry and chemical oxidation/reduction process was monitored by UV spectroscopy. We found it has a reversible electrochemical property like common oligoanilines. Combined with its well‐defined structure, it is expected to act as a model compound for a molecular electronic switch.

The “dumbbell‐shaped” oligoaniline compound synthesized here.     

“Sock-Ball” Chromatographic Separation of High Molecular Weight Fullerenes with Sock-Shaped Stationary Phase

A method for “Sock-Bail” chromatographic separation of high molecular weight fullerenes is described. A prepared sock-shaped stationary phase (Sock-SAF-phase) was used for HPLC separation of several polycyclic aromatic hydrocarbons (PAHs) and fullerenes. Fullerenes, as ball-shaped molecules, are much more strongly retained than PAHs on this stationary phase and have the eluted order C₅₀ < C₇₀ < C₇₆ < C₇₈ < C₈₄ in the mobile phase of n-hexane/dichloromethane (100/0 ～ 80/20). In contrast, chromatography on the corresponding unmodified silica phase or SC-3OH-phase (an intermediate phase of Sock-SAF-phase) gave no separation of fullerenes. This fact indicated that the separation of fullerenes on Sock-SAF-phase was related to the selective interaction with the sock moiety.     

Preparation of phenolic microspheres in water/“water” system

Phenolic microspheres were obtained by condensation of resorcinol and formaldehyde via a novel water/“water” suspension polymerization (WWSP) system, which was proposed and constructed for the first time. Resorcinol/formaldehyde aqueous solutions, ammonium sulfate aqueous solution, hydroxyethyl cellulose (HEC), and sodium hydroxyl were employed as water phase, “water” phase, stabilizer for protecting colloid, and catalyst, respectively. Stable and perfect phenolic microspheres were prepared in this special WWSP system. Particle sizes, size distribution, as well as morphology of microspheres were investigated by scanning electron microscope and computerized image analysis program. The results showed that particle size increased from 0.38 to 2.22 µm along with the increase of concentration of ammonium sulfate in “water” phase from 1.5% to 12.5% and the ratio of resorcinol to formaldehyde from 1:1.5 to 1:4. On the contrary, the particle size decreased from 1.80 to 0.30 µm with the increase of the amount of HEC from 0.1 to 1.0 g and amount of catalyst from 0.05 to 0.2 g. The polydispersity index value of the resulting microspheres is quite narrow, ranging from 1.01 to 1.30, which meant that the morphology of phenolic microspheres was unique. Copyright © 2011 John Wiley & Sons, Ltd.     

Drug Design of “Undruggable” Targets

Drug innovation is not only reflected in the discovery of new chemotypes of active compounds against existing targets but also more dependent on the innovation of drug targets. Currently, a number of attractive and validated targets could not be targeted pharmacologically. Some have been described as “undruggable”. In this review, we summarized the current situation of “undruggable” targets, and the design strategies for “undruggable” targets, hoping to provide references for the development of innovative drugs.     

“Click” chemistry for in situ formation of thermoresponsive P(NIPAAm‐co‐HEMA)‐based hydrogels

The strategy for in situ chemical gelation of poly(N‐isopropylacrylamide‐co‐hydroxylethyl methacrylate) [P(NIPAAm‐co‐HEMA)]‐based polymers was demonstrated. Two types of new P(NIPAAm‐co‐HEMA) derivatives with alkyne and azide pendant groups, respectively, were prepared. When the solutions of the two derivatives were mixed together, a crosslinking reaction, a type of Huisgen's 1,3‐dipolar azide‐alkyne cycloaddition, in the presence of Cu(I) catalyst occurs. The morphology, equilibrium swelling ratio, swelling kinetics, and temperature response kinetics of the in situ gelated hydrogels were studied. In comparison with the conventional PNIPAAm hydrogel, because of the spatial hindrance of polymeric chains, the resulted hydrogels had a macroporous structure as well as a fast shrinking rate. The strategy described here presents a potential alternative to the traditional synthesis techniques for the in situ formation of thermoresponsive hydrogels. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5263–5277, 2008     

Photo‐initiated thiol–ene “click” hydrogels from RAFT‐synthesized poly(N‐isopropylacrylamide)

Despite the efficiency and robustness of the widely used copper‐catalyzed 1,3‐dipolar cycloaddition reaction, the use of copper as a catalyst is often not attractive, particularly for materials intended for biological systems. The use of photo‐initiated thiol‐ene as an alternative “click” reaction to synthesize “model networks” is investigated here. Poly(N‐isopropylacrylamide) precursors were synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and were designed to have trithiocarbonate moieties as end groups. This structure design provides opportunity for subsequent end‐group modifications in preparation for thiol‐ene “click.” Two reaction routes have been proposed and studied to yield thiol and ene moieties. The advantages and disadvantages of each reaction path were investigated to propose a simple but efficient route to prepare copper‐free “click” hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4626–4636     

“Truncated” Pagodanes — Synthesis of Functionalized [1.1.1.1] and [1.1.1.0] Pagodanes

“Truncated” [1.1.1.1] pagodanes like the [1.1.0.0] and [0.0.0.0] homologues3 and 4 (E_Str = 146.1 – 171.5 kcal mol^?1, MM2) are potential precursors of unusual unsaturated homoconjugated radical cations and σ-bishomoaromatic dications. Attempts are presented toward the synthesis of 3 - starting out from [1.1.1.1] pagodane-4,9-dione 9 and diaza [2.2.1.1] pagodadiene 11 by cycloelimination (unsuccessful) and by Favorskii-type ring contraction methodologies. Control experiments with the model diketone 19 documented the limitations for α,α′-difunctionalization of 9 as the prerequisite for one-pot double Favorskii-type ring contraction. A de novo synthesis for such α,α′-disubstituted derivatives of 9(54) was not sufficiently expeditious to open a practical access to 3. Sequential double bridgehead hydroxylation of 9, successfully practized with model 19, similarly suffered from inherent cage effects and allowed only limited yields of [1.1.1.0] pagodanone 10, the intermediate on the way to 3.     

Modulating catalytic activity of polymer‐based cuAAC “click” reactions

The copper(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is used to synthesize complex polymer architectures. In this work, we demonstrate the control of this reaction at 25 °C between polystyrene (PSTY) chains through modulating the catalytic activity by varying the combinations of copper source (i.e., Cu(I)Br or copper wire), ligand (PMDETA and/or triazole ligand), and solvent (toluene or DMF). The fastest rate of CuAAC was found using Cu(I)Br/PMDETA ligand in toluene, reaching near full conversion after 15 min at 25 °C. For the same catalysts system, DMF also gave fast rates of “click” (95% conversion in 25 min). Cu(0) wire in toluene gave a conversion of 98% after 600 min, a much higher rate than that observed for the same catalyst system used in DMF. When the PSTY had a chemically bound triazole ring close to the site of reaction, the rate of CuAAC in toluene increased significantly, 97% in 180 min at 25 °C, in agreement with our previously published results. This suggests that rapid rates can be obtained using copper wire and will have direct applications to the synthesis of compound where air, removal of copper, and reuse of the copper catalyst are required. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

“Bicarburet of Hydrogen”. Reappraisal of the Discovery of Benzene in 1825 with the Analytical Methods of 1968

The historical background and the admirable analytical procedure that led Michael Faraday to the discovery of benzene in 1825 are discussed. Using modern techniques of instrumental analysis, the author retraces the isolation and analysis of benzene, and shows that the starting material used by Faraday must have been a very complex mixture of hydrocarbons, which would make severe demands even on present-day preparative analytical techniques, since it contains more than 300 components at concentrations greater than 100 ppm. The magnitude of the changes in analytical techniques can be seen from the fact that it is no longer necessary to isolate individual compounds, and that a great deal of information can be obtained with a much smaller quantity of material and in a much shorter time. Nevertheless, Faraday's persistence, experimental skill, and accuracy of measurement remain an example to the analyst of today.     

Synthesis of a “molecular rope curtain”: Preparation and characterization of a sliding graft copolymer with grafted poly(ethylene glycol) side chains by the “grafting onto” strategy

A sliding graft copolymer (SGC) with poly(ethylene glycol) (PEG) side chains was prepared by ester formation between terminal carboxyl groups of oxidized PEG methyl ether with molecular weight of 2000 (mPEG2000‐COOH) and hydroxyl groups of a polyrotaxane consisting of PEG and cyclodextrins (CDs). Formation of the SGC structure was confirmed by ¹H NMR, attenuated total reflectance Fourier‐transformed infrared, and gel permeation chromatography. The SGC was soluble in good solvents of PEG and insoluble in poor solvents of PEG. Estimation of the number of grafted mPEG chains suggested a “rope‐curtain” like structure, in which an mPEG chain is connected to each CD ring. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Tragacanth gum‐based pH‐responsive magnetic hydrogels for “smart” chemo/hyperthermia therapy of solid tumors

The drug delivery performances of pH‐responsive magnetic hydrogels (MHs) composed of tragacanth gum (TG), poly(acrylic acid) (PAA), and Fe₃O₄ nanoparticles (NPs) were investigated in terms of physicochemical as well as biological features. The fabricated drug delivery systems (DDSs) were analyzed using Fourier transform infrared spectroscopy, X‐ray diffraction, vibrating sample magnetometer, scanning electron microscopy, and transmission electron microscopy. The synthesized MHs were loaded with doxorubicin hydrochloride (Dox) as a universal model anti‐cancer drug. The MHs showed excellent Dox loading and encapsulation efficiencies, mainly due to strong hydrogen bonding and electrostatic interaction between the drug and polymeric matrix, as well as porous micro‐structures of the fabricated MHs. The drug‐loaded MHs showed negligible drug release values in physiological condition. In contrast, in cancerous condition (pH 5.0), both MHs exhibited highest drug release values that qualified them as “smart” DDSs. The cytocompatibilities of the MHs as well as the cytotoxicity of the Dox‐loaded MHs were investigated against human epidermoid‐like carcinoma (Hela) cells through MTT assay. In addition, hyperthermia therapy induced by Fe₃O₄ NPs was applied to locally raise temperature inside the Hela cells at 45 ± 3°C to promote cell death. As a result, the Dox‐loaded MHs can be considered as potential DDSs for chemo/hyperthermia therapy of solid tumors.