Enhanced Fluorescence Turn‐on Imaging of Hypochlorous Acid in Living Immune and Cancer Cells

Two closely related phenyl selenyl based boron‐dipyrromethene (BODIPY) turn‐on fluorescent probes for the detection of hypochlorous acid (HOCl) were synthesized for studies in chemical biology; emission intensity is modulated by a photoinduced electron‐transfer (PET) process. Probe 2 intrinsically shows a negligible background signal; however, after reaction with HOCl, chemical oxidation of selenium forecloses the PET process, which evokes a significant increase in fluorescence intensity. The fluorescence intensity of probes 1 and 2 with HOCl involves an ～18 and ～50‐fold enhancement compared with the respective responses from other reactive oxygen/nitrogen species (ROS/RNS) and low detection limits (30.9 nm for 1 and 4.5 nm for 2 ). Both probes show a very fast response with HOCl; emission intensity reached a maximum within 1 s. These probes show high selectivity for HOCl, as confirmed by confocal microscopy imaging when testing with RAW264.7 and MCF‐7 cells.     

Harnessing Intramolecular Rotation To Enhance Two‐photon Imaging of Aβ Plaques through Minimizing Background Fluorescence

The aggregation of amyloid beta (Aβ) proteins in senile plaques is a critical event during the development of Alzheimer's disease, and the postmortem detection of Aβ‐rich proteinaceous deposits through fluorescent staining remains one of the most robust diagnostic tools. In animal models, fluorescence imaging can be employed to follow the progression of the disease, and among the different imaging methods, two‐photon microscopy (TPM) has emerged as one of the most powerful. To date, several near‐infrared‐emissive two‐photon dyes with a high affinity for Aβ fibrils have been developed, but there has often been a tradeoff between excellent two‐photon cross‐sections and large fluorescence signal‐to‐background ratios. In the current work, we introduced a twisted intramolecular charge state (TICT)‐based de‐excitation pathway, which results in a remarkable fluorescence increase of around 167‐fold in the presence of Aβ fibrils, while maintaining an excellent two‐photon cross section, thereby enabling high‐contrast ex vivo and in vivo TPM imaging. Overall, the results suggest that adopting TICT de‐excitation in two‐photon fluorophores may represent a general method to overcome the tradeoff between probe brightness and signal‐to‐background ratio.     

Inverted Opal Fluorescent Film Chemosensor for the Detection of Explosive Nitroaromatic Vapors through Fluorescence Resonance Energy Transfer

This paper reports an inverted opal fluorescence chemosensor for the ultrasensitive detection of explosive nitroaromatic vapors through resonance‐energy‐transfer‐amplified fluorescence quenching. The inverted opal silica film with amino ligands was first fabricated by the acid–base interaction between 3‐aminopropyltriethoxysilane and surface sulfonic groups on polystyrene microsphere templates. The fluorescent dye was then chemically anchored onto the interconnected porous surface to form a hybrid monolayer of amino ligands and dye molecules. The amino ligands can efficiently capture vapor molecules of nitroaromatics such as 2,4,6‐trinitrotoluene (TNT) through the charge‐transfer complexing interaction between electron‐rich amino ligands and electron‐deficient aromatic rings. Meanwhile, the resultant TNT–amine complexes can strongly suppress the fluorescence emission of the chosen dye by the fluorescent resonance energy transfer (FRET) from the dye donor to the irradiative TNT–amino acceptor through intermolecular polar–polar resonance at spatial proximity. The quenching response of the highly ordered porous films with TNT is greatly amplified by at least 10‐fold that of the amorphous silica films, due to the interconnected porous structure and large surface‐to‐volume ratio. The inverted opal film with a stable fluorescence brightness and strong analyte affinity has lead to an ultrasensitive detection of several ppb of TNT vapor in air.     

Thiomaleimide Functionalization for Selective Biological Fluorescence Detection of Peroxynitrite as Tested in HeLa and RAW 264.7 Cells

The role of fluorescent molecules in diagnosis, treatment as well as in biomedical research has great current medicinal significance and is the focus of concentrated effort across the scientific research spectrum. Related research continues to reveal new practical sensing systems that bear enhanced features for interfacing of substituted molecules with biological systems. As part of an effort to better understand chalcogenide systems, a new dithiomaleimide BODIPY ( BDP‐NGM ) probe has been designed, synthesized and characterized. The fluorescence of BDP‐NGM was quenched by the incorporation of [3,4‐bis (phenylthio)] on the maleimide‐4‐phenyl moiety which is, in turn, placed at the meso ‐position of the BODIPY system. The probe shows a turn‐on fluorescence response upon reaction with ONOO⁻; mass spectral evidence reveals peaks in agreement with products involving oxidation of the sulfur groups to sulfone groups. An about 18.0‐fold emission intensity enhancement was found. By comparison, the emission signal from another ROS/RNS, superoxide, gave a modest turn on signal (≈5.0‐fold). The reaction is complete within 10 min, judging from the monitoring of the turn‐on fluorescence process; the detection limit was found to be 0.4 μm . BDP‐NGM can be used for the detection of ONOO⁻ under both acidic and basic conditions. Live cell imaging showed that the current probe can be used for the selective detection of ONOO⁻ in living systems.     

Cyclization‐Induced Turn‐On Fluorescence System Applicable to Dicarboxylate Sensing

A novel tetraphenylethene‐based fluorescence (FL) chemosensor exhibits nonlinear turn‐on FL switching though cooperative binding of L ‐tartarate, where its convergent binding to form cyclic substructures is responsible for the FL increase. This binding scheme achieves selective detection of dicarboxylates over monocarboxylates, thus is potentially applicable to the preliminary screening for metabolic disorders.     

A Subnanosecond Time-Resolved Fluorescence Lifetime Spectrometer Applying Laser Diodes

 Since the first application of laser diodes (LD) for the determination of fluorescence lifetimes in our group in 1995, great technical improvements have been made to increase the time resolution of the apparatus. Using the phase fluorometric method, measurements down to 100 ps are now possible. Values can be measured in steps of 10 ps with good reproducibility using a high-frequency signal generator and a GHz digital storage oscilloscope. No additional optical equipment is necessary for this new method. Following an easy calibration procedure, results are available within one minute without any adjustments. The components of the new apparatus including light source, sample chamber for standard fluorescence cuvettes, and detection unit are situated in a 12 × 13 × 9 cm setup. The apparatus was tested with different fluorophores, and the results correlate very well with known values in the range of 0.1 to 1000 ns.     

Activatable Molecular Probes for Second Near‐Infrared Fluorescence,Chemiluminescence, and Photoacoustic Imaging

Optical imaging plays a crucial role in biomedicine. However, due to strong light scattering and autofluorescence in biological tissue between 650–900 nm, conventional optical imaging often has a poor signal‐to‐background ratio and shallow penetration depth, which limits its ability in deep‐tissue in vivo imaging. Second near‐infrared fluorescence, chemiluminescence, and photoacoustic imaging modalities mitigate these issues by their respective advantages of minimized light scattering, eliminated external excitation, and ultrasound detection. To enable disease detection, activatable molecular probes (AMPs) with the ability to change their second near‐infrared fluorescence, chemiluminescence, or photoacoustic signals in response to a biomarker have been developed. This Minireview summarizes the molecular design strategies, sensing mechanisms, and imaging applications of AMPs. The potential challenges and perspectives of AMPs in deep‐tissue imaging are also discussed.     

Optimizing the Acquisition and Analysis of Confocal Images for Quantitative Single‐Mobile‐Particle Detection

Quantification of the fluorescence properties of diffusing particles in solution is an invaluable source of information for characterizing the interactions, stoichiometry, or conformation of molecules directly in their native environment. In the case of heterogeneous populations, single‐particle detection should be the method of choice and it can, in principle, be achieved by using confocal imaging. However, the detection of single mobile particles in confocal images presents specific challenges. In particular, it requires an adapted set of imaging parameters for capturing the confocal images and an adapted event‐detection scheme for analyzing the image. Herein, we report a theoretical framework that allows a prediction of the properties of a homogenous particle population. This model assumes that the particles have linear trajectories with reference to the confocal volume, which holds true for particles with moderate mobility. We compare the predictions of our model to the results as obtained by analyzing the confocal images of solutions of fluorescently labeled liposomes. Based on this comparison, we propose improvements to the simple line‐by‐line thresholding event‐detection scheme, which is commonly used for single‐mobile‐particle detection. We show that an optimal combination of imaging and analysis parameters allows the reliable detection of fluorescent liposomes for concentrations between 1 and 100 pM . This result confirms the importance of confocal single‐particle detection as a complementary technique to ensemble fluorescence‐correlation techniques for the studies of mobile particle.     

A Subnanosecond Time-Resolved Fluorescence Lifetime Spectrometer Applying Laser Diodes

Summary.  Since the first application of laser diodes (LD) for the determination of fluorescence lifetimes in our group in 1995, great technical improvements have been made to increase the time resolution of the apparatus. Using the phase fluorometric method, measurements down to 100 ps are now possible. Values can be measured in steps of 10 ps with good reproducibility using a high-frequency signal generator and a GHz digital storage oscilloscope. No additional optical equipment is necessary for this new method. Following an easy calibration procedure, results are available within one minute without any adjustments. The components of the new apparatus including light source, sample chamber for standard fluorescence cuvettes, and detection unit are situated in a 12 × 13 × 9 cm setup. The apparatus was tested with different fluorophores, and the results correlate very well with known values in the range of 0.1 to 1000 ns. Received February 16, 2000. Accepted March 13, 2000     

A high‐sensitivity LIF detector with silver mirror coating detection window and small‐angle optical deflection from collinear system for CE

An LIF detector was integrated into a CE system based on silver mirror coating detection window and small‐angle optical deflection from collinear configuration. For this detection scheme, the incident light beam was focused on capillary through the edge of a lens, resulting in a small deflection angle that deviated 18° from the collinear configuration. Meanwhile, the excitation light and emitted fluorescence were effectively reflected by silver mirror coating at the detection window. The fluorescence was collected through the center of the same lens and delivered to a PMT in the vertical direction. In contrast to conventional collinear LIF detection systems, the fluorescence intensity was greatly enhanced and the background level was significantly eliminated. FITC and FITC‐labeled amino acids were used as model analytes to evaluate the performance with respect to design factors of this system. The limit LOD was estimated to be 0.5 pM for FITC (S/N = 3), which is comparable to that of optimized confocal LIF systems. All the results indicate that the proposed detection scheme will be promising for development of sensitive and low‐cost CE system.     

核酸适配体荧光探针在生化分析和生物成像中的研究进展

核酸适配体是指通过体外筛选技术从核酸文库中筛选出来,能够高特异性、高亲和力识别靶标物的寡核苷酸序列,具有靶标类型广泛、合成简单、相对分子质量小、化学稳定性高、易于进行生物化学修饰等优点。 核酸适配体能够通过折叠成特定的二维或三维构型与靶标物特异性结合,加上合适的信号转导机制,为重要靶标物的研究提供理想的分子识别与分子检测探针。 荧光检测技术具有高灵敏、高分辨率、易于实现多元分析等优点。 将核酸适配体的分子识别特性与荧光优异的光学检测性能相结合,在生命科学研究领域有着广泛的应用空间。 本文主要综述了核酸适配体荧光探针常见的分子设计和信号响应方式,及其在细胞成像、亚细胞成像中的应用研究,并对核酸适配体探针目前面临的一些挑战进行了讨论,最后对其未来的发展方向进行了展望。     

Analytical characterization of laser excited atomic fluorescence of bismuth

The possibilities of direct determination of Bi traces by laser excited atomic fluorescence spectrometry were investigated. Practically all one-color excitation-detection schemes were examined. For the resonance fluorescence at 306.8 nm, the main source of background was a molecular fluorescence of residual water vapors. The background characteristic OH rotational lines of O-O band of ²Σ - ²Π transition were registered in the excitation spectra. From the relative intensities of the rotational components, the gas temperature of the analytical volume above the open graphite cup of the atomizer was estimated as 680 ± 120°C. A detection limit (LOD) of about 1 pg/ml was achieved for the resonance scheme. For the excitation wavelength shorter than 230 nm, broadband fluorescence of unidentified species in the 300-400 nm spectral range was the main source of background. The best LOD of 0.05 pg/ml was realized for the 223.1/ 299.3 nm excitation-detection scheme. This LOD is the best one for the one-color LEAFS technique. Possible ways of further increasing the LEAFS sensitivity of Bi traces detection are briefly discussed.     

Plasticization of a polymer layer harnessed to a silicon microcantilever as a highly sensitive and selective means to detect nitroaromatic derivatives

A new approach to the chemo‐mechanical detection of trace amounts of nitroaromatics, even in the presence of high concentrations of background materials, is presented. The detection scheme is based on the plasticization of an aminopropyl silane layer that is harnessed to a silicon beam following its reaction with nitroaromatic systems. The reaction‐induced plasticization attenuates the temperature induced bending of the polymer‐beam sandwich, offering a simple and very sensitive tool for the detection of nitroaromatic systems. Using this approach, it was possible to detect a sample of 100 pg TNT even in the presence of a ～10⁹ fold excess of a background material such as acetonitrile. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2124–2130     

Fluorescence Lifetime Imaging of Experimental Tumors in Hematoporphyrin Derivative-Sensitized Mice

Tumor detection has been carried out in mice sensitized with hematoporphyrin derivative (HpD) by measuring the spatial distribution of the fluorescence lifetime of the exogenous compound. This result has been achieved using a time-gated video camera and a suitable mathematical processing that led to the so-called “lifetime images.” Extensive experimental tests have been performed on mice bearing the MS-2 fibrosarcoma or the L1210 leukemia. Lifetime images of mice show that the fluorescence decay of HpD is appreciably slower in the tumor than in healthy tissues nearby, allowing a reliable detection of the neoplasia. The lengthening of the lifetime in tumors depends little on the drug dose, which in our experiments could be lowered down to 0.1 mg/kg body weight, still allowing a definite tumor detection. In order to ascertain the results achieved with the imaging apparatus, high-resolution spectroscopy, based on a time-correlated single photon counting system, has also been performed to measure the fluorescence lifetime of the drug inside the tumor and outside. The outcomes obtained with two techniques are in good agreement.     

Turning on Solid‐State Fluorescence with Light

A bioinspired fluorophore that is analogous to the substrate in the bioluminescence of fireflies was prepared and reacts when exposed to weak blue LED light. Upon excitation, this material is photodecarboxylated with a nearly 81‐fold enhancement of the solid‐state emission, the fluorescence quantum yield of the product in solution is approximately 90 %, and violent disintegrative effects occur as a result of the release of carbon dioxide. Crystallographic and computational results, together with global spectral analysis of the kinetics, confirmed that most of the emission observed in the decay‐associated spectra is intrinsic to the product molecule, with only a minor contribution from an excimer through π–π stacking of the molecules in the crystal.     

Ag‐CNT Architectures for Attomolar Dopamine Detection and 100‐Fold Fluorescence Enhancements with Cellphone‐Based Surface Plasmon‐Coupled Emission Platform

We report cellphone‐based detection of dopamine with attomolar sensitivity in clinical samples with the use of a surface plasmon‐coupled emission (SPCE) platform. To this end, silver‐coated carbon nanotubes were used as spacer and cavity materials on SPCE substrates to obtain up to 100‐fold fluorescence enhancements. The presence of silver on the carbon nanotubes helped to overcome fluorescence quenching arising due to π–π interactions between the carbon nanotube and rhodamine 6G. The competing adsorption of dopamine versus rhodamine 6G on graphene oxide was utilized to develop this sensing platform.     

Electrochemiluminescence Bioassays with a Water‐Soluble Luminol Derivative Can Outperform Fluorescence Assays

The most efficient and commonly used electrochemiluminescence (ECL) emitters are luminol, [Ru(bpy)₃]²⁺, and derivatives thereof. Luminol stands out due to its low excitation potential, but applications are limited by its insolubility under physiological conditions. The water‐soluble m‐carboxy luminol was synthesized in 15 % yield and exhibited high solubility under physiological conditions and afforded a four‐fold ECL signal increase (vs. luminol). Entrapment in DNA‐tagged liposomes enabled a DNA assay with a detection limit of 3.2 pmol L^?1, which is 150 times lower than the corresponding fluorescence approach. This remarkable sensitivity gain and the low excitation potential establish m‐carboxy luminol as a superior ECL probe with direct relevance to chemiluminescence and enzymatic bioanalytical approaches.     

脂质体荧光探针检测磷脂酶C的活性

建立了一种以荧光标记脂质体为探针检测磷脂酶 C (PLC) 活性的新方法.此荧光探针是由二棕榈酰磷脂酰胆碱(DPPC)和丽丝胺罗丹明B标记的荧光磷脂(Liss Rhod PE)通过自组装形成有序的荧光标记脂质体,探针脂质体中Liss Rhod PE由于相互之间距离靠近产生自猝灭效应,因而作为探针的脂质体并不表现出荧光性质.当在此探针溶液中加入目标物PLC,PLC可以水解切割标记在磷脂酰基二位上的荧光团罗丹明,使其从脂质体释放到溶液中,导致自猝灭效应的减弱,溶液荧光信号增强,以此实现对PLC活性的检测.使用此探针检测PLC活性,荧光强度的增加值与PLC浓度在5~300 U/L范围内呈良好的线性关系,检出限为2 U/L(S/N=3).此外,此探针还可用于PLC抑制剂的筛选.     

Lighting‐Up of the Dye Malachite Green with Mercury(II)–DNA and Its Application for Fluorescence Turn‐Off Detection of Cysteine and Glutathione

This work describes a novel strategy for the highly sensitive and selective detection of cysteine (Cys) and glutathione (GSH) based on the Hg²⁺–AGRO100–malachite green (MG) complex system. The dye MG, which has a very low quantum yield in aqueous solution by itself, can bind with the thymine‐rich DNA AGRO100 in the presence of Hg²⁺ ions to generate a striking fluorescence intensity enhancement of 1000‐fold. As sulfur‐containing amino acids, Cys and GSH effectively sequester Hg²⁺ ions from the Hg²⁺–AGRO100–MG complex structure to switch the ‘lit‐up’ chemosensor to the ‘off’ state (about a 50‐fold fluorescence intensity decrease), thus providing a facile, but effective, method to probe for Cys/GSH. The fluorescence titration, UV absorption, CD, and Raman spectra provide some insight into the structural and chemical basis for the enhancement effect. The formation of the Hg²⁺–AGRO100–MG complex significantly affects the electronic structure and conformation of the MG molecule by leading to an extended π system, which is the likely origin of the observed striking fluorescence intensity enhancement. Notably, the proposed sensing platform exhibits exquisite selectivity and sensitivity toward Cys/GSH with limits of detection of 5 nM for Cys and 10 nM for GSH, respectively. Furthermore, the straightforward assay design avoids labeling of the probe, uses only commercially available materials, and still displays comparable sensitivity and excellent selectivity.     

Improvements in the Atomic Fluorescence Detection of Mercury

Abstract

A new optical detector box for a commercially available detector for the atomic fluorescence detection of mercury was redesigned and tested. After optimisation of the new set-up the limit of detection was improved 13 fold. It was not feasible to use a hydrogen argon diffusion flame for the speciation of mercury, because of strong fluorescence signal quenching.