膜催化研究 Ⅱ.多孔无机膜的制备与表征及其反应器对甲醇脱氢反应的促进作用

采用溶胶-凝胶法制备了多孔氧化铝膜,并通过DSC、TGA、SEM、N_2吸附和气体透过率测定等手段,对膜的性能进行了表征.结果表明,用这种方法制备的多孔氧化铝膜是一种均匀无裂痕和具有较窄孔径分布(约4nm)的膜材料.将此多孔氧化铝膜制成膜反应器后,用于甲醇催化脱氢制甲醛的反应,发现甲醇转化率比常规反应器有较大幅度的提高.同时首次尝试采用溶胶-凝胶法将催化活性组分直接负载到多孔氧化铝膜上,从而得到了一种具有催化活性的多孔膜,并考察了它的反应活性.文中对由这两种多孔膜及钯/陶瓷复合膜制成的反应器的特点进行了比较.     

分子筛膜反应器的研究进展

分子筛膜具有规整的微孔结构(<1 nm), 耐高温高压、 抗有机溶剂, 在液相和气相小分子分离中受到广泛关注. 分子筛膜可以与催化反应耦合于一体构成膜反应器, 使反应过程与组分分离同时进行, 促进反应平衡移动, 达到反应强化的效果. 本文概述了近十年不同类型分子筛膜反应器在催化反应中的应用研究进展, 并对分子筛膜反应器未来的发展趋势进行了展望.     

透氢钯复合膜的原理、制备及表征

钯及其合金膜由于具有透氢性好和耐高温的特点,除了用作氢气分离和纯化器外,还可以用作脱氢、制氢等反应的反应器,以实现反应和分离的一体化,并提高转化率和选择性。本文综述了钯基复合膜的原理、制备及表征,并重点介绍了本研究组的光催化镀膜工艺。     

透氢钯复合膜的原理、制备及表征

钯及其合金膜由于具有透氢性好和耐高温的特点,除了用作氢气分离和纯化器外,还可以用作脱氢、制氢等反应的反应器,以实现反应和分离的一体化,并提高转化率和选择性.本文综述了钯基复合膜的原理、制备及表征,并重点介绍了本研究组的光催化镀膜工艺.     

膜的电子传递

生命体系的基本特点是它具有捕获、转换和贮存各种形式能量的功能,其中大部分的能量转换是发生在生物膜上。例如,质膜、类囊体膜、线粒体内膜、视网膜和神经膜就分别可将电化学能转为内能,光能转为化学能,内能转为化学能,光能转为电能以及化学能转为电能。在     

透氢钯复合膜的原理、制备及表征

钯及其合金膜由于具有透氢性好和耐高温的特点，除了用作氢气分离和纯化器外，还可以用作脱氢、制氢等反应的反应器，以实现反应和分离的一体化，并提高转化率和选择性。本文综述了钯基复合膜的原理、制备及表征，并重点介绍了本研究组的光催化镀膜工艺。     

全氟磺酸离子交换重铸膜的结构与性能研究

本文研究全氟磺酸离子交换重铸膜的结构、性能并与Nafion^?膜进行比较。结果表明：重铸膜FYM1150与Nafion^?膜的成分相同，但它们具有不同的结构，FYM1150干膜中含有部分50-300nm不贯穿断面的小孔，而Nafion112干膜为无孔密实结构；FYM1150的力学性能优于Nafion^?膜；受多孔结构的影响，在高电流密度端，使用FYM1150制备的膜电极，其电池性能也优于Nafion112膜。     

高效膜色谱的发展和应用

 对新兴的高效膜色谱的基质材料、膜形态、分离机理以及应用进行了综述，并对其用于对映体分离作了展望。共７６篇。     

荷电膜的膜电位研究

膜电位是表征荷电膜传递现象的重要参数之一.本文简要介绍了膜电位理论基础,包括T.M.S.理论和不可逆热力学理论.分别阐述了关于离子交换膜、双极膜、两性膜以及复合膜的膜电位的最新进展,并提出今后的发展方向.     

融合膜光下电子传递、质子传导与ATP合成的关系

融合膜重建ATP合成,而未见介质△pH,本文利用不同检测手段,重现了这一现象。通过类囊体膜与嵴膜的组合膜系,研究了光下质子动态变化,证明了这种膜系的光合磷酸化活力有随嵴膜组合量的增加而增加的现象,而介质△pH,9-AA荧光淬灭效应,和囊内中性红吸收变化却相反,随嵴膜组合量的增加而下降。对此现象,从融合膜中电子传递、质子传导与ATP合成的关系进行了分析和论证。     

表面作用力孔流通模型计算高分子滤过膜孔径大小及分布的方法

综述了一种建立在表面作用力孔流通模型基础上计算高分子多孔滤过膜孔径大小及分布的方法。     

Microbubble formation using asymmetric Shirasu porous glass (SPG) membranes and porous ceramic membranes—A comparative study

We have recently proposed a new method for generating uniformly sized microbubbles from Shirasu porous glass (SPG) membranes with a narrow pore size distribution. In this study, to obtain a high gas permeation rate through SPG membranes in microbubble formation process, asymmetric SPG membranes were used. At the transmembrane/bubble point pressure ratio of less than 1.50, uniformly sized microbubbles with a bubble/pore diameter ratio of approximately 9 were generated from an asymmetric SPG membrane with a mean pore diameter of 1.58 μm and a skin-layer thickness of 12 ± 2 μm at a gaseous-phase flux of 2.1–24.6 m³ m⁻² h⁻¹, which was much higher than that through a symmetric SPG membrane with the same pore diameter. This is mainly due to the much smaller membrane resistance of the asymmetric SPG membrane. Only 0.27–0.43% of the pores of the asymmetric SPG membrane was active under the same conditions. The proportion of active pores increased with a decrease in the thickness of skin layer. In contrast to the microbubble formation from asymmetric SPG membranes, polydispersed larger bubbles were generated from asymmetric porous ceramic membranes used in this study, due to the surface defects on the skin layer. The surface defects were observed by the scanning electron microscopy and detected by the bubble point method.     

Easy synthesis of iron doped ordered mesoporous carbon with tunable pore sizes

Precise control of the pore sizes for porous carbon materials is of importance to study the confinement effect of metal particles because the pore size in nanosize range will decide the physical and chemical properties of the metal nanoparticles.In this paper,we report a new approach for the synthesis of iron doped ordered mesoporous carbon materials with adjustable pore size using Fe-SBA-15 as hard template and boric acid as the pore expanding reagent.The pore size can be precisely adjusted by a step of 0.4 nm in the range of 3-6 nm.The carbonization temperature can be lowered to 773 K due to the catalytic role of the doped iron.The present approach is suitable for facile synthesis of metal imbedded porous carbon materials with tunable pore sizes.     

高分子辅助倒相法制备聚乙烯醇多孔膜

采用高分子辅助倒相法制香了多孔的ＰＶＡ－ＰＶＡｃ膜,并测得其孔隙率,最大孔径,平均孔径及孔径分布。研究了影响这些孔特性的各种因素,在扫描电镜下考察了多孔膜的微观形态,制得的膜孔隙率可调节,孔径分布窄。     

Modified liquid displacement method for determination of pore size distribution in porous membranes

A new method called constant pressure liquid displacement method (CPLM) was developed and tested to measure the pore size distribution of porous membranes. The permeability, defined as a ratio of the flow rate to the pressure applied, used to be assumed constant either for a conventional liquid displacement method or for a bubble point method, leading to the erroneous interpretation of the pore size distribution. However, it was possible to eliminate such an assumption by measuring the flow rates experimentally at a standard low pressure through the pores penetrated with a permeating liquid according to the proposed method. The pore size distribution for a hydrophobic PVDF membrane was successfully measured by the CPLM and compared with those measured by two different methods such as the conventional liquid displacement method and the mercury intrusion method.     

Detecting pore size distribution of activated carbon by low-field nuclear magnetic resonance

In this study, the transverse relaxation time (T₂) of activated carbon (AC) in different relative environment humidity was detected firstly by low-field nuclear magnetic resonance (LFNMR). The pore size (diameter) of AC distributions was calculated by the relationship between T₂ and surface relaxation rate (ρ), where ρ was obtained by the detection of nine porous materials with known pore size. The results showed that the pore size distributions of AC calculated by ρ < 0.19 nm/ms were in good agreement with that obtained by nitrogen adsorption method and proved that LFNMR as a new detection method was feasible for characterizing AC pore size distribution.     

纳米Fe3O4/PVDF磁性复合膜的原位制备及表征

通过膜相渗透原位化学沉积法制备了聚合物基Fe3O4/聚偏氟乙烯（PVDF）磁性纳米复合膜，研究了复合膜制备的适宜条件，采用红外光谱（FT-IR）、差热分析（DSC）、X射线衍射、扫描电镜（SEM）等手段对复合膜的组成、结构进行了表征和分析，通过气体渗透法测定了复合膜的孔径随制备条件的变化情况. FT-IR和XRD图谱结果表明，在基膜中原位生成Fe3O4后不影响基膜PVDF的分子结构；复合膜中的Fe3O4粒子尺寸为68 nm左右，复合膜的磁化率达0.044 cm3•g－1；复合膜的磁化率、平均孔径、最大孔径及孔径分布范围随反应条件的改变而有明显变化.     

Controlling Pore Size and its Distribution of γ-Al2O3 Nanofiltration Membranes

The preparation process of γ-A12O3 nanofiltration membranes were studied by N2 absorption and desorption test and retention rate vs thickness gradient curve method. It was found that template and thermal treatment were key factors for controlling pore size and its distribution.Under the optimized experimental conditions, the BJH (Barret-Jovner-Halenda) desorotion average pore diameter, BJH desorption cumulative volume of pores and BET (Brunauer-Emmett-Teller)surface area of obtained membranes were about 3.9 nm, 0.33 cm3/g and 245 m2/g respectively, the pore size distribution was very narrow. Pore size decreased with the increasing of thickness and no evident change after the dense top layer was formed. The optimum thickness can be controlled by retention rate vs thickness gradient curve method.     

具有三维贯通多级孔道结构大孔氧化铝的制备与表征

采用铝溶胶晶种引入、结合相分离的方法制备了具有三维贯通多级孔道结构的大孔氧化铝材料。采用扫描电镜（SEM）、X射线衍射（XRD）、N₂吸附-脱附、压汞、核磁共振波谱（NMR）等测试方法对所得材料进行了表征。结果表明,该氧化铝材料具有200-600 nm的均匀分布且贯通的连续大孔孔道,经550℃焙烧即可得到结晶态γ-氧化铝。大孔氧化铝比表面积达到366 m²/g,具有以5 nm及400 nm为中心的较为集中的介孔-大孔多级孔道分布。焙烧后的样品中,铝具有四、六两种配位状态。制备过程中,聚环氧乙烷（PEO）作为诱导剂引发固-液两相分离,形成具有三维贯通多级孔道结构大孔氧化铝,而凝胶中引入铝溶胶时,AlOOH晶粒与铝交联水合物均相伴生,在凝胶过程诱导铝交联水合物转变为AlOOH,最终使大孔氧化铝在较低的焙烧温度即可转化为γ-氧化铝。     

Biologically inspired silk fibroin grafted polyacrylonitrile filtration membrane prepared in ZnCl2 aqueous solution

Biologically inspired silk fibroin grafted polyacrylonitrile (SF-g-PAN) filtration membrane was prepared using ZnCl₂ aqueous solution as solvent, avoiding the use of organic solvents.