Water-soluble hydroxyalkylated phosphines: examples of their differing behaviour toward ruthenium and rhodium

The reaction of P(CH2OH)3 (I) and P(C6H5)(CH2OH)2 (II) with RuCl3 in methanol eliminates two equivalents of formaldehyde to yield the mixed tertiary and secondary phosphine complexes all-trans-[RuCl2(P(CH2OH)3)2(P(CH2OH)2H)2] (1) and [RuCl2(P(C6H5)(CH2OH)2)2(P(C6H5)(CH2OH)H)2] (2), respectively. There is a high degree of hydrogen-bonding interactions between the hydroxymethyl groups in 1 and 2, although the phenyl groups of the latter reduce the extent of the network compared to 1. The generation of these mixed secondary and tertiary phosphine complexes is unprecedented. Under the same reaction conditions, the tris(hydroxypropyl)phosphine III formed no ruthenium complex. The reaction of P(CH2OH)3, P(C6H5)(CH2OH)2 and P{(CH2)3OH}3 with [RhCl(1,5-cod)]2 in an aqueous/dichloromethane biphasic medium yielded [RhH2(P(CH2OH)3)4]+ (3), [RhH2(P(C6H5)(CH2OH)2)4]+ (4) and [Rh(P(C6H5)(CH2OH)2)4]+ (5) and [Rh(P{(CH2)3OH}3)4]+ (6), respectively. Treating 5 with dihydrogen rapidly gave 4. The hydroxypropyl compound 6 formed the corresponding dihydride much more slowly in aqueous solution, although [RhH2(P{(CH2)3OH}3)4]+ (7) was readily formed by reaction with dihydrogen. Two separate reaction pathways are therefore involved; for P(CH2OH)3 and to a lesser extent P(C6H5)(CH2OH)2, the hydride source in the product is likely to be the aqueous solvent or the hydroxyl protons, whilst for P{(CH2)3OH}3 an oxidative addition of H2 is favoured. The protic nature of and was illustrated by the H-D exchange observed in d2-water. Dihydrides 3 and 4 reacted with carbon monoxide to yield the dicarbonyl cations [Rh(CO)2(P(CH2OH)3)3]+ (8) and [Rh(CO)2(P(C6H5)(CH2OH)2)3]+ (9). The analogous experiment with [RhH2(P{(CH2)3OH}3)4]+ resulted in phosphine exchange, although our experimental evidence points to the possibility of more than one fluxional process in solution.     

Hydride ion transfer from ruthenium(II) complexes in water: kinetics and mechanism

Reactions of hydride complexes of ruthenium(II) with hydride acceptors have been examined for Ru(terpy)(bpy)H(+), Ru(terpy)(dmb)H(+), and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) in aqueous media at 25 °C (terpy = 2,2';6',2'-terpyridine, bpy = 2,2'-bipyridine, dmb = 4,4'-dimethyl-2,2'-bipyridine). The acceptors include CO(2), CO, CH(2)O, and H(3)O(+). CO reacts with Ru(terpy)(dmb)H(+) with a rate constant of 1.2 (0.2) × 10(1) M(-1) s(-1), but for Ru(η(6)-C(6)Me(6))(bpy)(H)(+), the reaction was very slow, k ≤ 0.1 M(-1) s(-1). Ru(terpy)(bpy)H(+) and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) react with CH(2)O with rate constants of (6 ± 4) × 10(6) and 1.1 × 10(3) M(-1) s(-1), respectively. The reaction of Ru(η(6)-C(6)Me(6))(bpy)(H)(+) with acid exhibits straightforward, second-order kinetics, with the rate proportional to [Ru(η(6)-C(6)Me(6))(bpy)(H)(+)] and [H(3)O(+)] and k = 2.2 × 10(1) M(-1) s(-1) (μ = 0.1 M, Na(2)SO(4) medium). However, for the case of Ru(terpy)(bpy)H(+), the protonation step is very rapid, and only the formation of the product Ru(terpy)(bpy)(H(2)O)(2+) (presumably via a dihydrogen or dihydride complex) is observed with a k(obs) of ca. 4 s(-1). The hydricities of HCO(2)(-), HCO(-), and H(3)CO(-) in water are estimated as +1.48, -0.76, and +1.57 eV/molecule (+34, -17.5, +36 kcal/mol), respectively. Theoretical studies of the reactions with CO(2) reveal a "product-like" transition state with short C-H and long M-H distances. (Reactant) Ru-H stretched 0.68 ?; (product) C-H stretched only 0.04 ?. The role of water solvent was explored by including one, two, or three water molecules in the calculation.     

Study of the ligand substitution reactions of cis,cis-[(bpy)(2)(L)RuORu(L')(bpy)(2)](n+) (L,L' = H(2)O,OH(-), NH(3)) using electrospray ionization mass spectrometry and (1)H NMR

We have successfully applied electrospray ionization mass spectrometry (ESI-MS) and (1)H NMR analyses to study ligand substitution reactions of mu-oxo ruthenium bipyridine dimers cis,cis-[(bpy)(2)(L)RuORu(L')(bpy)(2)](n+) (bpy = 2,2'-bipyridine; L and L' = NH(3), H(2)O, and HO(-)) with solvent molecules, that is, acetonitrile, methanol, and acetone. The results clearly show that the ammine ligand is very stable and was not substituted by any solvents, while the aqua ligand was rapidly substituted by all the solvents. In acetonitrile and acetone solutions, the substitution reaction of the aqua ligand(s) competed with a deprotonation reaction from the ligand. The hydroxyl ligand was not substituted by acetonitrile or acetone, but it exchanged slowly with CH(3)O(-) in methanol. The substitution reaction of the aqua ligands in [(bpy)(2)(H(2)O)Ru(III)ORu(III)(H(2)O)(bpy)(2)](4+) was more rapid than that of the hydroxyl ligand in [(bpy)(2)(H(2)O)Ru(III)ORu(IV)(OH)(bpy)(2)](4+). In methanol, slow reduction of Ru(III) to Ru(II) was observed in all the mu-oxo dimers, and the Ru-O-Ru bridge was then cleaved to give mononuclear Ru(II) complexes.     

Photochemical and thermal hydrogen production from water catalyzed by carboxylate-bridged dirhodium(II) complexes

A series of dinuclear Rh(II) complexes, [Rh(2)(μ-OAc)(4)(H(2)O)(2)] (HOAc = acetic acid) (1), [Rh(2)(μ-gly)(4)(H(2)O)(2)] (Hgly = glycolic acid) (2), [Rh(2)(μ-CF(3)CO(2))(4)(acetone)(2)] (3), and [Rh(2)(bpy)(2)(μ-OAc)(2)(OAc)(2)] (4), were found to serve as H(2)-evolving catalysts in a three-component system consisting of tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)(3)(2+)), methylviologen (MV(2+)), and ethylenediaminetetraacetic acid disodium salt (EDTA). It was also confirmed that thermal reduction of water into H(2) by MV(+)˙, in situ generated by the bulk electrolysis of MV(2+), is effectively promoted by 1 as a H(2)-evolving catalyst. The absorption spectra of the photolysis solution during the photocatalysis were monitored up to 6 h to reveal that the formation of photochemical or thermal byproducts of MV(+)˙ is dramatically retarded in the presence of the Rh(II)(2) catalysts, for the H(2) formation rather than the decomposition of MV(+)˙ becomes predominant in the presence of the Rh(II)(2) catalysts. The stability of the Rh(II)(2) dimers was confirmed by absorption spectroscopy, (1)H NMR, and ESI-TOF mass spectroscopy. The results indicated that neither elimination nor replacement of the equatorial ligands take place during the photolysis, revealing that one of the axial sites of the Rh(2) core is responsible for the hydrogenic activation. The quenching of Ru*(bpy)(3)(2+) by 1 was also investigated by luminescence spectroscopy. The rate of H(2) evolution was found to decrease upon increasing the concentration of 1, indicating that the quenching of Ru*(bpy)(3)(2+) by the Rh(ii)(2) species rather than by MV(2+) becomes predominant at the higher concentrations of 1. The DFT calculations were carried out for several possible reaction paths proposed (e.g., [Rh(II)(2)(μ-OAc)(4)(H(2)O)] + H(+) and [Rh(II)(2)(μ-OAc)(4)(H(2)O)] + H(+) + e(-)). It is suggested that the initial step is a proton-coupled electron transfer (PCET) to the Rh(II)(2) dimer leading to the formation of a Rh(II)Rh(III)-H intermediate. The H(2) evolution step is suggested to proceed either via the transfer of another set of H(+) and e(-) to the Rh(II)Rh(III)-H intermediate or via the homolytic radical coupling through the interaction of two Rh(II)Rh(III)-H intermediates.     

Dihydrogen complexes of rhodium: [RhH2(H2)x (PR3)2]+ (R = Cy, iPr; x = 1, 2)

Addition of H2 (4 atm at 298 K) to [Rh(nbd)(PR3)2][BAr(F)4] [R = Cy, iPr] affords Rh(III) dihydride/dihydrogen complexes. For R = Cy, complex 1a results, which has been shown by low-temperature NMR experiments to be the bis-dihydrogen/bis-hydride complex [Rh(H)2(eta2-H2)2(PCy3)2][BAr(F)4]. An X-ray diffraction study on 1a confirmed the {Rh(PCy3)2} core structure, but due to a poor data set, the hydrogen ligands were not located. DFT calculations at the B3LYP/DZVP level support the formulation as a Rh(III) dihydride/dihydrogen complex with cis hydride ligands. For R = iPr, the equivalent species, [Rh(H)2(eta2-H2)2(P iPr3)2][BAr(F)4] 2a, is formed, along with another complex that was spectroscopically identified as the mono-dihydrogen, bis-hydride solvent complex [Rh(H)2(eta2-H2)(CD2Cl2)(P iPr3)2][BAr(F)4] 2b. The analogous complex with PCy3 ligands, [Rh(H)2(eta2-H2)(CD2Cl2)(PCy3)2][BAr(F)4] 1b, can be observed by reducing the H2 pressure to 2 atm (at 298 K). Under vacuum, the dihydrogen ligands are lost in these complexes to form the spectroscopically characterized species, tentatively identified as the bis hydrides [Rh(H)2(L)2(PR3)2][BAr(F)4] (1c R = Cy; 2c R = iPr; L = CD2Cl2 or agostic interaction). Exposure of 1c or 2c to a H2 atmosphere regenerates the dihydrogen/bis-hydride complexes, while adding acetonitrile affords the bis-hydride MeCN adduct complexes [Rh(H)2(NCMe)2(PR3)2][BAr(F)4]. The dihydrogen complexes lose [HPR3][BAr(F)4] at or just above ambient temperature, suggested to be by heterolytic splitting of coordinated H2, to ultimately afford the dicationic cluster compounds of the type [Rh6(PR3)6(mu-H)12][BAr(F)4]2 in moderate yield.     

Interception of a Rh(I)-Rh(III) dinuclear trihydride complex revealing the dihydrogen activation by [Rh(CO)2{(R,R)-Ph-BPE}

Reaction of [Rh(CO)(2){(R,R)-Ph-BPE}][BF(4)] 1 under 7 bar H(2) provides the dihydride [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 3, which reacts with the neutral hydride [Rh(H)(CO){(R,R)-Ph-BPE}] 2 arising from 3 in THF. The resulting complex is the dimeric monocationic Rh((I))-Rh((III)) complex [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 4.     

Recognition of DNA base pair mismatches by a cyclometalated Rh(III) intercalator

Two cyclometalated complexes of Rh(III), rac-[Rh(ppy)2chrysi]+ and rac-[Rh(ppy)2 phi]+, have been synthesized and characterized with respect to their binding to DNA. The structure of rac-[Rh(ppy)2 phi]Cl.H2O.CH2Cl2 has been determined by X-ray diffraction (monoclinic, P2(1)/c, Z = 4, a = 18.447(3) A, b = 9.770(1) A, c = 17.661(3) A, beta = 94.821(11) degrees, V = 3172.0(8) A3) and reveals that the complex is a distorted octahedron with nearly planar ligands, similar in structure to the DNA mismatch recognition agent [Rh(bpy)2chrysi]3+. The 2-phenylpyridyl nitrogen atoms are shown to be in the axial positions, as a result of trans-directing effects. This tendency simplifies the synthesis and purification of such complexes by limiting the number of possible isomers generated. The abilities of [Rh(ppy)2chrysi]+ and [Rh(ppy)2 phi]+ to bind and, with photoactivation, to cleave DNA have been demonstrated in assays on duplex DNA in the absence and presence of a single CC mismatch. [Rh(ppy)2chrysi]+ was shown upon photoactivation to cleave DNA selectively at the base pair mismatch whereas [Rh(ppy)2 phi]+ cleaves B-DNA nonspecifically. The reactivity of [Rh(ppy)2chrysi]+ was also compared to that of the known mismatch recognition agent [Rh(bpy)2chrysi]3+. Competitive photocleavage studies revealed that a 14-fold excess of [Rh(ppy)2chrysi]+ was required to achieve the same level of binding as that of [Rh(bpy)2chrysi]3+. However, the ratio of damage induced by [Rh(bpy)2chrysi]3+ to that induced by [Rh(ppy)2chrysi]+ is considerably greater than this value, indicating that decreased photoefficiency for the cyclometalated complex must contribute to its significantly attenuated photoreactivity. These cyclometalated intercalators provide the starting points for the design of a new family of metal complexes targeted to DNA.     

Synthesis and structure of CpMo(CO)(dppe)H and its oxidation by Ph3C+

The reaction of CpMo(CO)(dppe)Cl (dppe = Ph2PCH2CH2PPh2) with Na+[AlH2(OCH2CH2OCH3)2]- gives the molybdenum hydride complex CpMo(CO)(dppe)H, the structure of which was determined by X-ray crystallography. Electrochemical oxidation of CpMo(CO)(dppe)H in CH3CN is quasi-reversible, with the peak potential at -0.15 V (vs Fc/Fc+). The reaction of CpMo(CO)(dppe)H with 1 equiv of Ph3C+BF4- in CD3CN gives [CpMo(CO)(dppe)(NCCD3)]+ as the organometallic product, along with dihydrogen and Gomberg's dimer (which is formed by dimerization of Ph3C.). The proposed mechanism involves one-electron oxidation of CpMo(CO)(dppe)H by Ph3C+ to give the radical-cation complex [CpMo(CO)(dppe)H].+. Proton transfer from [CpMo(CO)(dppe)H].+ to CpMo(CO)(dppe)H, loss of dihydrogen from [CpMo(CO)(dppe)(H)2]+, and oxidation of Cp(CO)(dppe)Mo. by Ph3C+ lead to the observed products. In the presence of an amine base, the stoichiometry changes, with 2 equiv of Ph3C+ being required for each 1 equiv of CpMo(CO)(dppe)H because of deprotonation of [CpMo(CO)(dppe)H].+ by the amine. Protonation of CpMo(CO)(dppe)H by HOTf provides the dihydride complex [CpMo(CO)(dppe)(H)2]+OTf-, which loses dihydrogen to generate CpMo(CO)(dppe)(OTf).     

Comprehensive thermochemistry of W-H bonding in the metal hydrides CpW(CO)2(IMes)H, [CpW(CO)2(IMes)H](•+), and [CpW(CO)2(IMes)(H)2]+. Influence of an N-heterocyclic carbene ligand on metal hydride bond energies

The free energies interconnecting nine tungsten complexes have been determined from chemical equilibria and electrochemical data in MeCN solution (T = 22 °C). Homolytic W-H bond dissociation free energies are 59.3(3) kcal mol(-1) for CpW(CO)(2)(IMes)H and 59(1) kcal mol(-1) for the dihydride [CpW(CO)(2)(IMes)(H)(2)](+) (where IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), indicating that the bonds are the same within experimental uncertainty for the neutral hydride and the cationic dihydride. For the radical cation, [CpW(CO)(2)(IMes)H](?+), W-H bond homolysis to generate the 16-electron cation [CpW(CO)(2)(IMes)](+) is followed by MeCN uptake, with free energies for these steps being 51(1) and -16.9(5) kcal mol(-1), respectively. Based on these two steps, the free energy change for the net conversion of [CpW(CO)(2)(IMes)H](?+) to [CpW(CO)(2)(IMes)(MeCN)](+) in MeCN is 34(1) kcal mol(-1), indicating a much lower bond strength for the 17-electron radical cation of the metal hydride compared to the 18-electron hydride or dihydride. The pK(a) of CpW(CO)(2)(IMes)H in MeCN was determined to be 31.9(1), significantly higher than the 26.6 reported for the related phosphine complex, CpW(CO)(2)(PMe(3))H. This difference is attributed to the electron donor strength of IMes greatly exceeding that of PMe(3). The pK(a) values for [CpW(CO)(2)(IMes)H](?+) and [CpW(CO)(2)(IMes)(H)(2)](+) were determined to be 6.3(5) and 6.3(8), much closer to the pK(a) values reported for the PMe(3) analogues. The free energy of hydride abstraction from CpW(CO)(2)(IMes)H is 74(1) kcal mol(-1), and the resultant [CpW(CO)(2)(IMes)](+) cation is significantly stabilized by binding MeCN to form [CpW(CO)(2)(IMes)(MeCN)](+), giving an effective hydride donor ability of 57(1) kcal mol(-1) in MeCN. Electrochemical oxidation of [CpW(CO)(2)(IMes)](-) is fully reversible at all observed scan rates in cyclic voltammetry experiments (E° = -1.65 V vs Cp(2)Fe(+/0) in MeCN), whereas CpW(CO)(2)(IMes)H is reversibly oxidized (E° = -0.13(3) V) only at high scan rates (800 V s(-1)). For [CpW(CO)(2)(IMes)(MeCN)](+), high-pressure NMR experiments provide an estimate of ΔG° = 10.3(4) kcal mol(-1) for the displacement of MeCN by H(2) to give [CpW(CO)(2)(IMes)(H)(2)](+).     

Hydrogen-atom transfer in open-shell organometallic chemistry: the reactivity of Rh(II)(cod) and Ir(II)(cod) radicals

A series of new metalloradical rhodium and iridium complexes [M(II)(cod)(N-ligand)](2+) in the uncommon oxidation state +II were synthesized by one-electron oxidation of their [M(I)(cod)(N-ligand)](+) precursors (M=Rh, Ir; cod=(Z,Z)-1,5-cyclooctadiene; and N-ligand is a podal bis(pyridyl)amine ligand: N,N-bis(2-pyridylmethyl)amine (dpa), N-(2-pyridylmethyl)-N-(6-methyl-2-pyridylmethyl)amine (pla), or N-benzyl-N,N-bis(6-methyl-2-pyridylmethyl)amine (Bn-dla). EPR spectroscopy, X-ray diffraction, and DFT calculations reveal that each of these [M(II)(cod)(N-ligand)](2+) species adopts a square-pyramidal geometry with the two cod double bonds and the two pyridine fragments in the basal plane and the N(amine) donor at the apical position. The unpaired electron of these species mainly resides at the metal center, but the apical N(amine) donor also carries a considerable fraction of the total spin density (15-18 %). Density functional calculations proved a valuable tool for the analysis and simulation of the experimental EPR spectra. Whereas the M(II)(olefin) complexes are quite stable as solids, in solution they spontaneously transform into a 1:1 mixture of M(III)(allyl) species and protonated M(I)(olefin) complexes (in the forms [M(I)(olefin)(protonated N-ligand)](2+) for M=Rh and [M(III)(H)(olefin)(N-ligand)](2+) for M=Ir). Similar reactions were observed for the related propene complex [M(II)(propene)(Me(2)tpa)](2+) (Me(2)tpa=N,N,N-tris(6-methyl-2-pyridylmethyl)amine). The decomposition rate of the [M(II)(cod)(N-ligand)](2+) species decreases with increasing N-ligand bulk in the following order: dpa>pla>Bn-dla. Decomposition of the most hindered [M(II)(cod)(Bn-dla)](2+) complexes proceeds by a second-order process. The kinetic rate expression v=k(obs)[M(II)](2) in acetone with k(obs)=k'[H(+)][S], where [S] is the concentration of additional coordinating reagents (MeCN), is in agreement with ligand-assisted dissociation of one of the pyridine donors. Solvent coordination results in formation of more open, reactive species. Protonation of the noncoordinating pyridyl group increases the concentration of this species, and thus [H(+)] appears in the kinetic rate expression. The kinetic data are in agreement with bimolecular hydrogen-atom transfer from M(II)(cod) to another M(II) species (DeltaH( not equal)=11.5+/-2 kcal mol(-1), DeltaS( not equal)=-27+/-10 cal K(-1) mol(-1), and DeltaG( not equal)(298 K)=19.5+/-5 kcal mol(-1)).     

Proton exchange kinetics from the bound waters on the oxo-centered rhodium(III) trimer [Rh3(mu3-O)(mu-O2CCH3)6(OH2)3]+: a variable pH and temperature 1H NMR study

Proton exchange from the bound to the bulk waters on the oxo-centered rhodium(III) trimer, [Rh(3)(micro(3)-O)(micro-O(2)CCH(3))(6)(OH(2))(3)](+)(abbreviated as Rh(3)(+)), was investigated over the temperature range of 219.1-313.9 K using a (1)H NMR line-broadening technique. By solving the modified Bloch equations for a two-site chemical exchange, lifetimes (tau) for proton transfer at pH = 2.7, 3.6, and 7.0 ([Rh(3)(+)]= 26 mM, T= 298 K) were determined to be 0.3 (+/-.08) ms, 2 (+/-0.3) ms, and 0.2 (+/-0.2) ms, respectively. From the temperature dependence of the rate, the activation parameters were determined to be DeltaH(++)= 16.2 (+/-0.5) kJ mol(-1) and DeltaS(++)=- 123 (+/-2) J mol(-1) K(-1), DeltaH(++)= 14.9 (+/-0.5) kJ mol(-1) and DeltaS(++)=- 141 (+/-2) J mol(-1) K(-1), and DeltaH(++)= 45 (+/-2) kJ mol(-1) and DeltaS(++)=- 22 (+/-5) J mol(-1) K(-1) for pH = 2.7, 3.6 and 7.0, respectively. All results are reported for a mixed solvent system [acetone : 250 mM NaClO(4)(aq)(3:1)], which was necessary to depress the freezing point of the solution so that the (1)H NMR signal due to bound water could be observed. The pK(a) of Rh(3)(+) was measured to be 8.9 (+/-0.2) in the mixed solvent, which is near the pK(a) for an aqueous solution (8.3 (+/-0.2)). Surprisingly, the lifetimes for protons on Rh(3)(+) are close to those observed for the Rh(OH(2))(6)(3+) ion, in spite of the considerable difference in structure, Br?nsted acidity of the bound waters and average charge on the metal ion.     

Mechanistic Study on the Monofunctional Binding of Hydrolysis Products of Non-planar Heterocyclic Complexes Trans-[PtCl_2NH_3（piperidine）] and Trans-[PtCl_2（piperidine）_2] to DNA Purine Bases

The monofunctional substitution reactions between trans-[PtCl(H2O)(NH3)(pip)]+,trans-[Pt(H2O)2(NH3)(pip)]2+,trans-[PtCl(H2O)(pip)2]+,trans-[Pt(H2O)2(pip)2]2+ (pip = piperidine) and adenine/guanine nucleotides are explored by using B3LYP hybrid functional and IEF-PCM salvation models. For the trans-[Pt(H2O)2(NH3)(pip)]2+ and trans-[PtCl(H2O)(NH3)(pip)]+ complexes,the computed barrier heights in aqueous solution are 13.5/13.5 and 11.6/11.6 kcal/mol from trans-Pt-chloroaqua complex to trans/cis-monoadduct for adenine and guanine,and the corresponding values are 20.7/20.7 and 18.8/18.8 kcal/mol from trans-Pt-diaqua complex to trans/cis-monoadduct for adenine and guanine,respectively. For trans-[PtCl(H2O)(pip)2]+ and trans-[Pt(H2O)2(pip)2]2+,the corresponding values are 21.5/21.3 and 19.4/19.4 kcal/mol,and 26.0/26.0 and 20.7/20.8 kal/mol for adenine and guanine,respectively. Our calculations demonstrate that the barrier heights of chloroaqua are lower than the corresponding values of diaqua for adenine and guanine. In addition,the free energies of activation for guanine in aqueous solution are all smaller than that for adenine,which predicts a preference of 1.9 kcal/mol when trans-[PtCl(H2O)(NH3)(pip)]+ and trans-[Pt(H2O)2(NH3)(pip)]2+ are the active agents and ～1.9 and ～ 5.3 kcal/mol when trans-[PtCl(H2O)(pip)2]+ and trans-[Pt(H2O)2(pip)2]2+ are the active agents,respectively. For the reaction of trans-Pt-chloroaqua (or diaqua) to cis-monoadduct,we obtain the same transition-state structure as from the reaction of trans-Pt-chloroaqua (or diaqua) to trans-monoadduct,which seems that the trans-Pt-chloroaqua (or diaqua) complex can generate trans-or cis-monoadduct via the same transition-state.     

Various forms of linear dipyridyls in discrete rectangles, dinuclear rods, and one-dimensional networks containing (eta5-pentamethylcyclopentadienyl)rhodium(III)

[Cp*Rh(eta1-NO3)(eta2-NO3)] (1) reacted with pyrazine (pyz) to give a dinuclear complex [Cp*Rh(eta1-NO3)(mu-pyz)(0.5)]2.CH2Cl2(3.CH2Cl2). Tetranuclear rectangles of the type [Cp*Rh(eta1,mu-X)(mu-L)(0.5)]4(OTf)4(4a: X = N3, L = bpy; 4b: X = N3, L = bpe; 4c: X = NCO, L = bpy) were prepared from [Cp*Rh(H2O)3](OTf)2 (2), a pseudo-halide (Me3SiN3 or Me3SiNCO), and a linear dipyridyl [4,4'-bipyridine (bpy) or trans-1,2-bis(4-pyridyl)ethylene (bpe)] by self-assembly through one-pot synthesis at room temperature. Treating complex with NH4SCN and dipyridyl led to the formation of dinuclear rods, [Cp*Rh(eta1-SCN)3]2(LH2) (5a: L = bpy; 5b: L = bpe), in which two Cp*Rh(eta1-SCN)3 units are connected by the diprotonated dipyridyl (LH2(2+)) through N(+)-H...N hydrogen bonds. Reactions of complex 2 with 1-(trimethylsilyl)imidazole (TMSIm) and dipyridyl (bpy or bpe) also produced another family of dinuclear rods [Cp*Rh(ImH)3]2.L (6a: L = bpy; 6b: L = bpe). Treating 1 and 2 with TMSIm and NH4SCN (in the absence of dipyridyl) generated a 1-D chain [Cp*Rh(ImH)3](NO3)2 (7) and a 1-D helix [Cp*Rh(eta1-SCN)2(eta1-SHCN)].H2O (8.H2O), respectively. The structures of complexes 3.CH2Cl2, 4a.H2O, 4c.2H2O, 5b, 6a, 7 and 8.H2O were determined by X-ray diffraction.     

First investigation of non-classical dihydrogen bonding between an early transition-metal hydride and alcohols: IR, NMR, and DFT approach

The interaction of [NbCp(2)H(3)] with fluorinated alcohols to give dihydrogen-bonded complexes was studied by a combination of IR, NMR and DFT methods. IR spectra were examined in the range from 200-295 K, affording a clear picture of dihydrogen-bond formation when [NbCp(2)H(3)]/HOR(f) mixtures (HOR(f) = hexafluoroisopropanol (HFIP) or perfluoro-tert-butanol (PFTB)) were quickly cooled to 200 K. Through examination of the OH region, the dihydrogen-bond energetics were determined to be 4.5+/-0.3 kcal mol(-1) for TFE (TFE = trifluoroethanol) and 5.7+/-0.3 kcal mol(-1) for HFIP. (1)H NMR studies of solutions of [NbCp(2)H(2)(B)H(A)] and HFIP in [D(8)]toluene revealed high-field shifts of the hydrides H(A) and H(B), characteristic of dihydrogen-bond formation, upon addition of alcohol. The magnitude of signal shifts and T(1) relaxation time measurements show preferential coordination of the alcohol to the central hydride H(A), but are also consistent with a bifurcated character of the dihydrogen bonding. Estimations of hydride-proton distances based on T(1) data are in good accord with the results of DFT calculations. DFT calculations for the interaction of [NbCp(2)H(3)] with a series of non-fluorinated (MeOH, CH(3)COOH) and fluorinated (CF(3)OH, TFE, HFIP, PFTB and CF(3)COOH) proton donors of different strengths showed dihydrogen-bond formation, with binding energies ranging from -5.7 to -12.3 kcal mol(-1), depending on the proton donor strength. Coordination of proton donors occurs both to the central and to the lateral hydrides of [NbCp(2)H(3)], the former interaction being of bifurcated type and energetically slightly more favourable. In the case of the strong acid H(3)O(+), the proton transfer occurs without any barrier, and no dihydrogen-bonded intermediates are found. Proton transfer to [NbCp(2)H(3)] gives bis(dihydrogen) [NbCp(2)(eta(2)-H(2))(2)](+) and dihydride(dihydrogen) complexes [NbCp(2)(H)(2)(eta(2)-H(2))](+) (with lateral hydrides and central dihydrogen), the former product being slightly more stable. When two molecules of TFA were included in the calculations, in addition to the dihydrogen-bonded adduct, an ionic pair formed by the cationic bis(dihydrogen) complex [NbCp(2)(eta(2)-H(2))(2)](+) and the homoconjugated anion pair (CF(3)COO...H...OOCCF(3))(-) was found as a minimum. It is very likely that these ionic pairs may be intermediates in the H/D exchange between the hydride ligands and the OD group observed with the more acidic alcohols in the NMR studies.     

Ruthenium(II)-polyazine light absorbers bridged to reactive cis-dichlororhodium(III) centers in a bimetallic molecular architecture

Bimetallic complexes of the form [(bpy)(2)Ru(BL)RhCl(2)(phen)](PF(6))(3), where bpy = 2,2'-bipyridine, phen = 1,10-phenanthroline, and BL = 2,3-bis(2-pyridyl)pyrazine (dpp) or 2,2'-bipyrimidine (bpm), were synthesized, characterized, and compared to the [{(bpy)(2)Ru(BL)}(2)RhCl(2)](PF(6))(5) trimetallic analogues. The new complexes were synthesized via the building block method, exploiting the known coordination chemistry of Rh(III) polyazine complexes. In contrast to [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) and [{(bpy)(2)Ru(bpm)}(2)RhCl(2)](PF(6))(5), [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) have a single visible light absorber subunit coupled to the cis-Rh(III)Cl(2) moiety, an unexplored molecular architecture. The electrochemistry of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) showed a reversible oxidation at 1.61 V (vs Ag/AgCl) (Ru(III/II)), quasi-reversible reductions at -0.39 V, -0.74, and -0.98 V. The first two reductive couples corresponded to two electrons, consistent with Rh reduction. The electrochemistry of [(bpy)(2)Ru(bpm)RhCl(2)(phen)](PF(6))(3) exhibited a reversible oxidation at 1.76 V (Ru(III/II)). A reversible reduction at -0.14 V (bpm(0/-)), and quasi-reversible reductions at -0.77 and -0.91 V each corresponded to a one electron process, bpm(0/-), Rh(III/II), and Rh(II/I). The dpp bridged bimetallic and trimetallic display Ru(dpi)-->dpp(pi*) metal-to-ligand charge transfer (MLCT) transitions at 509 nm (14,700 M(-1) cm(-1)) and 518 nm (26,100 M(-1) cm(-1)), respectively. The bpm bridged bimetallic and trimetallic display Ru(dpi)-->bpm(pi*) charge transfer (CT) transitions at 581 nm (4,000 M(-1) cm(-1)) and 594 nm (9,900 M(-1) cm(-1)), respectively. The heteronuclear complexes [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) and [{(bpy)(2)Ru(dpp)}(2)RhCl(2)](PF(6))(5) had (3)MLCT emissions that are Ru(dpi)-->dpp(pi*) CT in nature but were red-shifted and lower intensity than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4). The lifetimes of the (3)MLCT state of [(bpy)(2)Ru(dpp)RhCl(2)(phen)](PF(6))(3) at room temperature (30 ns) was shorter than [(bpy)(2)Ru(dpp)Ru(bpy)(2)](PF(6))(4), consistent with favorable electron transfer to Rh(III) to generate a metal-to-metal charge-transfer ((3)MMCT) state. The reported synthetic methods provide means to a new molecular architecture coupling a single Ru light absorber to the Rh(III) center while retaining the interesting cis-Rh(III)Cl(2) moiety.     

Solvent-dependent interconversions between Rh(I), Rh(II), and Rh(III) complexes of an aryl-monophosphine ligand

Reaction of the aryl-monophosphine ligand alpha(2)-(diisopropylphosphino)isodurene (1) with the Rh(I) precursor [Rh(coe)(2)(acetone)(2)]BF(4) (coe=cyclooctene) in different solvents yielded complexes of all three common oxidation states of rhodium, depending on the solvent used. When the reaction was carried out in methanol a cyclometalated, solvent-stabilized Rh(III) alkyl-hydride complex (2) was obtained. However, when the reaction was carried out in acetone or dichloromethane a dinuclear eta(6)-arene Rh(II) complex (5) was obtained in the absence of added redox reagents. Moreover, when acetonitrile was added to a solution of either the Rh(II) or Rh(III) complexes, a new solvent-stabilized, noncyclometalated Rh(I) complex (6) was obtained. In this report we describe the different complexes, which were fully characterized, and probe the processes behind the remarkable solvent effect observed.     

Synthesis of heteroleptic bis(diimine)carbonylchlororuthenium(II) complexes from photodecarbonylated precursors

The reactions of bidentate diimine ligands (L2) with binuclear [Ru(L1)(CO)Cl2]2 complexes [L1 not equal to L2 = 2,2'-bipyridine (bpy), 4,4'-dimethyl-2,2'-bipyridine (4,4'-Me2bpy), 5,5'-dimethyl-2,2'-bipyridine (5,5'-Me2bpy), 1,10-phenanthroline (phen), 4,7-dimethyl-1,10-phenanthroline (4,7-Me2phen), 5,6-dimethyl-1,10-phenanthroline (5,6-Me2phen), di(2-pyridyl)ketone (dpk), di(2-pyridyl)amine (dpa)] result in cleavage of the dichloride bridge and the formation of cationic [Ru(L1)(L2)(CO)Cl]+ complexes. In addition to spectroscopic characterization, the structures of the [Ru(bpy)(phen)(CO)Cl]+, [Ru(4,4'-Me2bpy)(5,6-Me2phen)(CO)Cl]+ (as two polymorphs), [Ru(4,4'-Me2bpy)(4,7-Me2phen)(CO)Cl]+, [Ru(bpy)(dpa)(CO)Cl]+, [Ru(5,5'-Me2bpy)(dpa)(CO)Cl]+, [Ru(bpy)(dpk)(CO)Cl]+, and [Ru(4,4'-Me2bpy)(dpk)(CO)Cl]+ cations were confirmed by single crystal X-ray diffraction studies. In each case, the structurally characterized complex had the carbonyl ligand trans to a nitrogen from the incoming diimine ligand, these complexes corresponding to the main isomers isolated from the reaction mixtures. The synthesis of [Ru(4,4'-Me2bpy)(5,6-Me2bpy)(CO)(NO3)]+ from [Ru(4,4'-Me2bpy)(5,6-Me2bpy)(CO)Cl]+ and AgNO3 demonstrates that exchange of the chloro ligand can be achieved.     

Diastereoselective formation of chiral iridium hydrides containing the chiral P,N-chelate ligand (4S)-2-(2-(diphenylphosphino)phenyl)-4-isopropyl-1,3-oxazoline

The iridium complex [Ir(mu-Cl)(PN)(PPh3)]2 (1) reacts with H2 affording only the kinetic isomer OC-6-55-C of the dihydride [IrClH2(PN)(PPh3)] (2) and with methanol yielding, also exclusively, the thermodynamic isomer OC-6-53-C (2b) of the same dihydride; complex 2b has been characterised by X-ray diffractometric methods.     

Direct oxidation of L-cysteine by [FeIII(bpy)2(CN)2]+ and [FeIII(bpy)(CN)4]-

The oxidation of L-cysteine by the outer-sphere oxidants [Fe(bpy)2(CN)2]+ and [Fe(bpy)(CN)4]- in anaerobic aqueous solution is highly susceptible to catalysis by trace amounts of copper ions. This copper catalysis is effectively inhibited with the addition of 1.0 mM dipicolinic acid for the reduction of [Fe(bpy)2(CN)2]+ and is completely suppressed with the addition of 5.0 mM EDTA (pH<9.00), 10.0 mM EDTA (9.010.0) for the reduction of [Fe(bpy)(CN)4]-. 1H NMR and UV-vis spectra show that the products of the direct (uncatalyzed) reactions are the corresponding Fe(II) complexes and, when no radical scavengers are present, L-cystine, both being formed quantitatively. The two reactions display mild kinetic inhibition by Fe(II), and the inhibition can be suppressed by the free radical scavenger PBN (N-tert-butyl-alpha-phenylnitrone). At 25 degrees C and micro=0.1 M and under conditions where inhibition by Fe(II) is insignificant, the general rate law is -d[Fe(III)]/dt=k[cysteine]tot[Fe(III)], with k={k2Ka1[H+]2+k3Ka1Ka2[H+]+k4Ka1Ka2Ka3{/}[H+]3+Ka1[H+]2+Ka1Ka2[H+]+Ka1Ka2Ka3}, where Ka1, Ka2, and Ka3 are the successive acid dissociation constants of HSCH2CH(NH3+)CO2H. For [Fe(bpy)2(CN)2]+, the kinetics over the pH range of 3-7.9 yields k2=3.4+/-0.6 M(-1) s(-1) and k3=(1.18+/-0.02)x10(6) M(-1) s(-1) (k4 is insignificant in the fitting). For [Fe(bpy)(CN)4]- over the pH range of 6.1-11.9, the rate constants are k3=(2.13+/-0.08)x10(3) M(-1) s(-1) and k4=(1.01+/-0.06)x10(4) M(-1) s(-1) (k2 is insignificant in the fitting). All three terms in the rate law are assigned to rate-limiting electron-transfer reactions in which various thiolate forms of cysteine are reactive. Applying Marcus theory, the self-exchange rate constant of the *SCH2CH(NH2)CO2-/-SCH2CH(NH2)CO2- redox couple was obtained from the oxidation of L-cysteine by [Fe(bpy)(CN)4]-, with k11=4x10(5) M(-1) s(-1). The self-exchange rate constant of the *SCH2CH(NH3+)CO2-/-SCH2CH(NH3+)CO2- redox couple was similarly obtained from the rates with both Fe(III) oxidants, a value of 6x10(6) M(-1) s(-1) for k11 being derived. Both self-exchange rate constants are quite large as is to be expected from the minimal rearrangement that follows conversion of a thiolate to a thiyl radical, and the somewhat lower self-exchange rate constant for the dianionic form of cysteine is ascribed to electrostatic repulsion.     

2-rhodaoxetanes: their formation of oxidation of [RhI(ethene)]+ and their reactivity upon protonation

New cationic, pentacoordinate complexes [(TPA)Rh1(ethene)]+, [1a]+, and [(MeTPA)Rh1(ethene)]+, [1b]+, have been prepared (TPA = N,N,N-tri(2-pyridylmethyl)amine, MeTPA = N-[(6-methyl-2-pyridyl)-methyl]-N,N-di(2-pyridylmethyl)amine). Complex [1a]+ is selectively converted by aqueous HCl to [(TPA)RhIII-(ethyl)Cl]+, [2a]+. The same reaction with [1b]+ results in the [(MeTPA)RhIII-(ethyl)Cl]+ isomers [2b]+ and [2c]+. Treatment of [1a]+ and [1b]+ with aqueous H2O2 results in a selective oxygenation to the unsubstituted 2-rho-da(III)oxetanes (1-oxa-2-rhoda(III)cyclo-butanes) [(TPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3a]+, and [(MeTPA)RhIII(kappa2-C,O-2-oxyethyl)]+, [3b]+. The reactivity of 2-rhodaoxetanes [3a]+ and [3b]+ is dominated by the nucleophilic character of their 2-oxyethyl oxygen. Reaction of [3a]+ and [3b]+ with the non-coordinating acid HBAr(f)4 results in the dicationic protonated 2-rhodaoxetanes [(TPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4a]2+, and [(MeTPA)RhIII(kappa2-2-hydroxyethyl)]2+, [4b]2+. These eliminate acetaldehyde at room temperature, probably via a coordinatively unsaturated kappa1-2-hydroxyethyl complex. In acetonitrile, complex [4a]2+ is stabilised as [(TPA)-RhIII(kappa1-2-hydroxyethyl)(MeCN)]2+, [5a]2+, whereas the MeTPA analogue [4b]2+ continues to eliminate acetaldehyde. Reaction of [3a]+ with NH4Cl and Mel results in the coordinatively saturated complexes [(TPA)RhIII(kappa1-2-hydroxyethyl)(Cl)]+, [6a]+, and [(TPA)-RhIII(kappa1-2-methoxyethyl)(I)+, [7a]+, respectively. Reaction of [3a]+ with NH4+ in MeCN results in formation of the dicationic metallacyclic amide [(TPA)-RhIII [kappa2-O,C-2-(acetylamino)ethyl]]2+, [9]2+, via the intermediates [4a]2+, [5a]2+ and the metallacyclic iminoester [(TPA)RhIII[kappa2-N,C-2-(acetimidoyloxy)ethyl]]2+, [8]2+. The observed overall conversion of the [Rh(I)(ethene)] complex [1a]+ to the metallacyclic amide [9]2+ via 2-rhodaoxetane [3a]+, provides a new route for the amidation of a [RhI(ethene)] fragment.