Fourier transform-infrared and Raman spectra, ab initio calculations and assignments for 6-methyl-4-bromomethylcoumarin

Fourier transform-infrared (4000-400 cm-1) and Raman (3500-50 cm-1) spectral measurements have been made for 6-methyl-4-bromomethylcoumarin. Equilibrium structures, harmonic vibrational frequencies, infrared intensities, and depolarization ratios have been computed at RHF/6-31G* and B3LYP/6-31G* levels of theory. Twisting CH2Br moiety in the geometry optimization leads to the most stable conformer lacking symmetry (C1). This is reflected in the richness of bands in the experimental spectra. A complete assignments of the bands, aided by the ab initio calculations, has been proposed for the 6-methyl-4-bromomethylcoumarin. Due to lack of symmetry, several normal vibrations have been found to be mixed ones.     

FT-Raman and infrared spectra and vibrational assignments for 3-chloro-4-methoxybenzaldehyde, as supported by ab initio, hybrid density functional theory and normal coordinate calculations

Fourier-transform laser Raman (3500-50 cm(-1)) and infrared (4000-400 cm(-1)) spectral measurements have been made for the solid 3-chloro-4-methoxybenzaldehyde. The electronic structure calculations -ab initio (RHF) and hybrid density functional methods (B3LYP and B3PW91) -- have been performed with 6-31G* and 6-311G* basis sets. Molecular electronic energies, equilibrium geometries, IR and Raman spectra have been computed. Potential energy distribution (PEDs) and normal mode analysis have also been performed. A complete assignment of the observed spectra has been proposed. Investigation of the relative orientation of the aldehydic oxygen and chlorine atom with respect to the methoxy group has shown that two forms, O-cis and O-trans exist, with O-trans form being more stable. The energy difference between O-cis and O-trans forms is 0.057 kcal/mol (21 cm(-1)) with B3LYP/6-31G*, which is less than the calculated torsional vibrational frequencies of the aldehyde and methoxy group. In the CH (O) aldehydic stretching region five observed bands are probably due to multiplet Fermi resonance. An infrared doublet near 1700 cm(-1) with nearly equal intensities has been ascribed to the Fermi resonance: the two bands at 1696 and 1679 cm(-1) arise due to the interaction between the CO stretching fundamental and a combination of O-CH(3) and CC stretching vibrations.     

The vibrational spectra, assignments and ab initio/DFT analysis for 3-chloro, 4-chloro and 5-chloro-2-methylphenyl isocyanates

The Raman (3500-50 cm(-1)) and infrared (4000-200 cm(-1)) spectra of 3-chloro, 4-chloro and 5-chloro-2-methylphenyl isocyanates have been measured. Ab initio and density functional theory calculations, at the levels of RHF/6-311G* and B3LYP/6-311G*, have been performed: energies, optimized geometrical parameters, vibrational frequencies, infrared intensities, Raman activities, depolarization ratios and nuclear displacements are obtained. Potential energy distributions (PEDs) and normal modes, for the spectral data computed at B3LYP/6-311G*, have also been obtained from a force-field calculations. A complete vibrational assignments of the observed spectra have been proposed. The force-field calculations have shown that, several of the normal modes are coupled, as is the case with large molecular systems possessing very low or no symmetry, such as investigated in the present study. Further, the investigation of the internal rotation of the isocyanate, NCO, by B3LYP/6-31G* level of theory has shown that the moiety maintains nearly the same orientation in all the three compounds (approximately 140-145 degrees tilt to the para-position) as in phenyl isocyanate. Two conformers, cis and trans forms, with respect to the substituents, NCO and CH(3), have been determined: the cis form lies above trans form by less than a kilocalorie per mole for each compound.     

Experimental and computational studies of the structure and vibrational spectra of aminomethyl-dimethyl-phosphine oxide and its 15N labeled isomer

Infrared (4000-100 cm(-1)) spectra of aminomethyl-dimethyl-phosphine oxide and 15N-aminomethyl-dimethyl-phosphine oxide have been measured. Geometric parameters (bond distances and angles), net electronic charges and vibrational spectroscopic data of both compounds calculated at various levels of theory (B3LYP/6-31G* and Moeller-Plesset perturbational theory (MP2)/6-31G*) are reported. The theoretical spectral results are discussed mainly in terms of comparison with infrared (4000-100 cm(-1)) spectral data. Better coincidence was achieved with the frequencies calculated at the MP2/6-31G* level: the standard deviation is 16 cm(-1). The calculated isotopic frequency shifts, induced by the 15N labeling, are in good accordance with the measured ones. Complete vibrational assignment is made with the help of MP2 force field calculations. Data obtained here are used to reassign some of the vibrational frequencies.     

FT-IR and FT-Raman spectra and vibrational investigation of 4-chloro-2-fluoro toluene using ab initio HF and DFT (B3LYP/B3PW91) calculations

FT-IR (4000-100 cm(-1)) and FT-Raman (4000-100 cm(-1)) spectra of solid sample of 4-chloro-2-fluoro toluene (4Cl2FT) have been recorded using Bruker IFS 66 V spectrometer. Ab initio-HF (HF/6-311++G (d, p)) and DFT (B3LYP/6-311++G and B3PW91/6-311++G (d, p)) calculations have been performed giving energies, optimized structures, harmonic vibrational frequencies, depolarization ratios, IR intensities, Raman activities. The vibrational frequencies are calculated and scaled values are compared with FT-IR and FT-Raman experimental values. The isotropic HF and DFT analyses showed good agreement with experimental observations. The differences between the observed and scaled wave number values of most of the fundamentals are very small in B3LYP than HF. Comparison of the simulated spectra provides important information about the ability of the computational method (B3LYP) to describe the vibrational modes. The influences of substitutions on the geometry of molecule and its normal modes of vibrations have also been discussed. The changes made by substitutions on the benzene are much responsible for the non-linearity of the molecule. This is an attractive entity for the future studies of non-linear optics.     

2-Bromohydroquinone: structures, vibrational assignments and RHF, B- and B3-based density functional calculations

Vibrational spectral measurements, namely, infrared (4000-400 cm(-1)) and Raman (3500-50 cm(-1)) spectra have been made for 2-Bromohydroquinone. Optimized geometrical structures, harmonic vibrational frequencies and intensities have been computed by the ab initio (RHF), B-based (BLYP, BP86) and B3-based (B3P86, B3LYP, B3PW91) density functional methods using 6-31G(d) basis set. A complete assignment of the observed spectra has been proposed. Coupling of vibrations has been determined by calculating potential energy distributions (PEDs) at BP86/6-31G(d) level of theory. In the computed equilibrium geometries by all the levels, the bond lengths and bond angles show changes in the neighborhood of Bromine. Similarly, the vibrational spectra exhibit some marked spectral features unlike in hydroquinone and phenol. On the other hand, the infrared spectrum shows a clear evidence of O-H...O bonding near 3200 cm(-1) as in hydroquinone. Evaluation of the theoretical methods demonstrates that all the levels but the RHF have reproduced frequencies fairly accurately in the 2000-500 cm(-1); below 500 cm(-1) the RHF has performed reasonably well.     

FT-IR and FT-Raman spectroscopic investigation, computed vibrational frequency analysis and IR intensity and Raman activity peak resemblance analysis on 2-nitroanisole using HF and DFT (B3LYP and B3PW91) calculations

Fourier-transform Raman and infrared spectra of 2-nitroanisole are recorded (4000-100 cm(-1)) and interpreted by comparison with respective theoretical spectra calculated using HF and DFT method. The geometrical parameters with C(S) symmetry, harmonic vibrational frequencies, infrared and Raman scattering intensities are determined using HF/6-311++G (d, p), B3LYP/6-311+G (d, p), B3LYP/6-311++G (d, p) and B3PW91/6-311++G (d, p) level of theories. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The results of the calculations have been used to simulate IR and Raman spectra for the molecule that showed good agreement with the observed spectra. The SQM method, which implies multiple scaling of the DFT force fields has been shown superior to the uniform scaling approach. The vibrational frequencies and the infrared intensities of the C-H modes involved in back-donation and conjugation are also investigated.     

Vibrational spectra and structure of benzil and its 18O- and d10-labelled derivatives: a quantum chemical and experimental study

Geometry and vibrational spectroscopic data of benzil-d0 benzil-d10 and benzil-18O calculated at various levels of theory (RHF/6-31G*, B3LYP/6-31G*, BLYP/6-31G*) are reported. The theoretical results are discussed mainly in terms of the comparisons with infrared (4000-100 cm(-1)) and Raman (4000-50 cm(-1)) spectral data. The calculated isotopic frequency shifts, induced by the 18O- and d10-labeling, are in a good agreement with the measured values. A complete vibrational assignment was made with the help of ab initio force field calculations. The data thus obtained were used for reassigning some vibrational frequencies. The results of the optimized molecular structure obtained on the basis of RHF and the DFT calculations are presented and compared with the experimental X-ray diffraction for the benzil-d0 single crystal. It turns out that the best structural parameters are predicted by the B3LYP/6-31G* method.     

Structural and spectroscopic studies on some chloropyrimidine derivatives by experimental and quantum chemical methods

Ab initio quantum chemical and experimental spectroscopic studies in the infrared (4000-60 cm(-1)) and UV spectral regions are being reported on 4-chloro-2,6-dimethylsulfanyl pyrimidine-5-carbonitrile and 4-chloro-2-methylsulfanyl-6-(2-thienyl) pyrimidine-5-carbonitrile. Optimized geometries, electronic charge distribution, dipole moments and three-dimensional molecular electrostatic potential surfaces have been obtained. These have been used to understand the structure and spectral characteristics of the two compounds. A complete assignment of vibrational spectra on the basis of DFT/6-311G** and electronic spectra on the basis of TD-DFT/6-31+G* 5D calculations have been attempted for the two molecules.     

Structures and vibrational frequencies of 2-hydroxy-3-methoxy-5-nitrobenzaldehyde and 2-methoxy-1-naphthaldehyde based on density functional theory calculations

FT-IR and FT-Raman spectra of 2-hydroxy-3-methoxy-5-nitrobenzaldehyde (HMN) and 2-methoxy-1-naphthaldehyde (MN) have been recorded in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. The molecular structure, conformational stability, geometry optimization, vibrational frequencies have been investigated. The total energy calculations of HMN and MN were tried for various possible conformers. The spectra were interpreted with the aid of normal coordinate analysis based on density functional theory (DFT) using B3LYP/6-31G* and B3LYP/6-311+G** level and basis set combinations and was scaled using various scale factors yielding good agreement between observed and calculated frequencies. The infrared and Raman spectra were also predicted from the calculated intensities. Comparison of the simulated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

Spectra and structure of silicon-containing compounds. Part XXXVIII: Infrared and Raman spectra,vibrational assignment,conformational stability,and ab initio calculations of vinyldifluorosilane

Infrared spectra (3500-50 cm(-1)) of gaseous and solid, and Raman spectrum (3500-30 cm(-1)) of liquid vinyldifluorosilane, CH(2)z.dbnd6;CHSiF(2)H, are reported. Both the cis and gauche rotamers have been identified in the fluid phases. From temperature-dependent FT-infrared spectra of krypton solutions, it is shown that the cis conformer is more stable than the gauche form by 119+/-12 cm(-1) (1.42+/-0.14 kJ mol(-1)). At ambient temperature there is 53+/-2% of the gauche conformer present. Complete vibrational assignments are provided for the cis conformer and several modes are identified for the gauche form. Harmonic force constants, fundamental frequencies, infrared intensities, and Raman activities have been obtained from MP2/6-31G(d) calculations with full electron correlation. The optimized geometries and conformational stabilities have also been obtained from ab initio MP2/6-31G(d), MP2/6-311+G(d,p), and MP2/6-311+G(2d,2p) calculations with full electron correlation as well as from density functional theory calculations (DFT) by the B3LYP method. The SiH bond distances (r(0)) of 1.472 and 1.471 A have been obtained for the cis and gauche conformers, respectively, from the silicon-hydrogen stretching frequencies. These results are compared to the corresponding quantities of the corresponding carbon analogue as well as with some similar molecules.     

Conformational stability, vibrational assignmenents, barriers to internal rotations and ab initio calculations of 2-aminophenol (d 0 and d3)

The Raman (3700-100 cm(-1)) and infrared (4000-400 cm(-1)) spectra of solid 2-aminophenol (2AP) have been recorded. The internal rotation of both OH and NH2 moieties produce ten conformers with either Cs or C1 symmetry. However, the calculated energies as well as the imaginary vibrational frequencies reduce rotational isomerism to five isomers. The molecular geometry has been optimized without any constraints using RHF, MP2 and B3LYP levels of theory at 6-31G(d), 6-311+G(d) and 6-31++G(d,p) basis sets. All calculations predict 1 (cis; OH is directed towards NH2) to be the most stable conformation except RHF/6-31++G(d,p) basis set. The 1 (cis) isomer is found to be more stable than 8 (trans; OH is away from the NH2 moiety and the NH bonds are out-of-plane) by 1.7 kcal/mol (598 cm(-1)) as obtained from MP2/6-31G(d) calculations. Aided by experimental and theoretical vibrational spectra, cis and trans 2AP are coexist in solution but cis isomer is more likely present in the crystalline state. Aided by MP2 and B3LYP frequency calculations, molecular force fields, simulated vibrational spectra utilizing 6-31G(d) basis set as well as normal coordinate analysis, complete vibrational assignments for HOC6H4NH2 and DOC6H4ND2 have been proposed. Furthermore, we carried out potential surface scan, to determine the barriers to internal rotations of NH2 and OH groups. All results are reported herein and compared with similar molecules when appropriate.     

Vibrational assignments and electronic structure calculations for 3-acetylcoumarin

Laser Raman (3500-50 cm(-1)) and IR (4000-400 cm(-1)) spectral measurements have been made on the laboratory prepared solid 3-acetylcoumarin. Molecular electronic energy, equilibrium geometrical structure and harmonic vibrational spectra have been computed at the RHF/6-31G(d,p) and B3LYP/6-31G(d,p) levels of theory. A complete vibrational assignment aided by the theoretical harmonic frequency analysis has been proposed. The B3LYP/6-31G(d,p) geometrical parameters, and frequencies of the C=O in the pyrone and acetyl group are in good agreement with experiment. The difference in the frequencies due to the two carbonyl groups, 50 cm(-1), which is attributed to the conjugation effect, is accounted for by the B3LYP to be 56cm(-1).     

Theoretical Study on the Structure and Vibrational Spectra for4-methyl-3-penten-2-one

The4-methyl-3-penten-2-oneisanimportanta,0-unsaturedketonemoleculeandanimportantligandoftheorganometalliccompounds.Untilnow,somepropertiesofphoto-chemistryandexcitedstateshavebeenexperimentallystudied'-#andconformationofthemoleculewerealsostudiedinexperiments"'.Standardinfraredgratingspectrumwasalsoobtainedin1970'.However,therearenodensityfunctionaltheory(DFT)calculationsofthismoleculeintheliterature.Recently,densityfunctionaltheoryhasbeenacceptedbytheahinitioquantumchemistrycommunityasacost…     

Molecular structure, IR spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole by density functional theory and ab initio Hartree–Fock calculations

Quantum chemistry calculations have been performed using Gaussian03 program to compute optimized geometry, harmonic vibrational frequency along with intensities in IR and Raman spectra and atomic charges at RHF/6-31+G*, B3LYP/6-31+G* and B3LYP/6-31++G* levels for 2-mercaptobenzothiazole (MBT, C₇H₅NS₂) and 2-mercaptobenzoxazole (MBO, C₇H₅NOS) in the ground state. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR and FT-Raman spectra. The results show that the scaled theoretical vibrational frequencies is very good agreement with the experimental values. A detailed interpretation of the infrared and Raman spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole was reported. Comparison of calculated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

Infrared and Raman spectra, conformational stability, ab initio calculations and vibrational assignments for trans-3-chloropropenoyl chloride

The infrared (3500-30 cm(-1)) spectra of gaseous and solid and the Raman (3500-200 cm(-1)) spectra of the liquid with quantitative depolarization ratios and solid trans-3-chloropropenoyl chloride (trans-ClCHCHCClO) have been recorded. These data indicate that both the anti (carbonyl bond trans to the carbon-carbon double bond) and syn conformers are present in the fluid states but only the anti conformer is present in the crystalline state. The mid-infrared spectra of the sample dissolved in liquid xenon as a function of temperature (-55 to -100 degrees C) have been recorded. Utilizing conformer pairs at 870 and 725 cm(-1), 1215 and 1029 cm(-1), and 1215 and 1228 cm(-1), the enthalpy difference has been determined to be 136+/-5 cm(-1) (389+/-14 cal mol(-1)) with the anti conformer the more stable form. Optimized geometries and conformational stabilities were obtained from ab initio calculations at the levels of RHF/6-31G(d), MP2/6-31G(d), MP2/6-311 + + G(d,p), MP2/6-311 + + G(2d,2p) and MP2/6-311 + + G(2df,2pd) with only the latter two calculations predicting the anti rotamer to be the more stable form. The vibrational frequencies, harmonic force constants and infrared intensities were obtained from the MP2/6-31G(d) calculations, whereas the Raman activities and depolarization values were obtained from the RHF/6-31G(d) calculations. The spectra are interpreted in detail and the results are compared with those obtained for some related molecules.     

FTIR and FTRaman spectra,assignments, ab initio HF and DFT analysis of 4-nitrotoluene

In this work, the experimental and theoretical study on molecular structure and vibrational spectra of 4-nitrotoluene are studied. The FTIR and FTRaman experimental spectra of the molecule have been recorded in the range of 4000–100 cm^?1. Making use of the recorded data, the complete vibrational assignments are made and analysis of the observed fundamental bands of molecule is carried out. The experimental determinations of vibrational frequencies are compared with those obtained theoretically from ab initio HF and DFT quantum mechanical calculations using HF/6-31G (d, p), B3LYP/6-31++G* (d, p) and B3LYP/6-311++G* (d, p) methods. The differences between the observed and scaled wave number values of most of the fundamentals are very small in B3LYP than HF. The geometries and normal modes of vibrations obtained from ab initio HF and B3LYP calculations are in good agreement with the experimentally observed data. Comparison of the simulated spectra provides important information about the ability of the computational method (B3LYP) to describe the vibrational modes. The vibrations of NO₂ and CH₃ groups coupled with skeletal vibrations are also investigated.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene III. 3,3-Dimethyl-1-(trimethylsilyl)cyclopropene

The experimental Raman and IR vibrational spectra of 3,3-dimethyl-1-(trimethylsilyl)cyclopropene in the liquid phase were recorded. Total geometry optimisation was carried out at the HF/6-31G* level and the HF/6-31G*//HF/6-31G* force field was computed. This force field was corrected by scale factors determined previously (using Pulay's method) for correction of the HF/6-31G*//HF/6-31G* force fields of 3,3-dimethylbutene-1, 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The theoretical vibrational frequencies calculated from the scaled quantum mechanical force field and the theoretical intensities obtained from the quantum mechanical calculation were used to construct predicted spectra and to perform the vibrational analysis of the experimental spectra.     

Experimental and theoretical investigations of benzamide oxime

The FT-IR (4000-400 cm(-1)) and FT-Raman (4000-100 cm(-1)) spectral measurements of benzamide oxime and complete assignments of the observed spectra have been proposed. Ab initio and DFT calculations have been performed giving energies, optimized structures, harmonic vibrational frequencies, depolarization ratios, IR intensities, Raman activities and atomic displacements. Furthermore, force field calculations have been performed by normal coordinate analysis. Force field calculations showed that several normal modes are mixed in terms of the internal coordinates. A complete assignment of the observed spectra, based on spectral correlations, electronic structure calculations and normal coordinate analysis, has been provided.     

Experimental (FT-IR and FT-Raman) and theoretical (HF and DFT) investigation, IR intensity, Raman activity and frequency estimation analyses on 1-bromo-4-chlorobenzene

The FT-IR and FT-Raman spectra of 1-bromo-4-chlorobenzene (1-Br-4-CB) have been recorded using Bruker IFS 66V spectrometer in the region of 4000-100 cm(-1). Ab-initio-HF (HF/6-311+G (d, p)) and DFT (B3LYP/6-31++G (d, p)/6-311++G (d, p)) calculations have been performed giving energies, optimized structures, harmonic vibrational frequencies, depolarization ratios, IR intensities, Raman activities. The vibrational frequencies are calculated and scaled values are compared with FT-IR and FT-Raman experimental values. Comparison of simulated spectra with the experimental spectra provides important information, the computational method have the ability to describe the vibrational methods. The frequency estimation analysis on HF and DFT is made. The impact of di-substituted halogens on the benzene molecule has also been discussed.