Electrochemiluminescent aptamer biosensor for the determination of ochratoxin A at a gold-nanoparticles-modified gold electrode using N-(aminobutyl)-N-ethylisoluminol as a luminescent label

A highly selective electrochemiluminescent biosensor for the detection of target nephrotoxic toxin, ochratoxin A (OTA), was developed using a DNA aptamer as the recognition element and N-(4-aminobutyl)-N-ethylisoluminol (ABEI) as the signal-producing compound. The electrochemiluminescent aptamer biosensor was fabricated by immobilizing aptamer complementary DNA 1 sequence onto the surface of a gold-nanoparticle (AuNP)-modified gold electrode. ABEI-labeled aptamer DNA 2 sequence hybridized to DNA 1 and was utilized as an electrochemiluminescent probe. A decreased electrochemiluminescence (ECL) signal was generated upon aptamer recognition of the target OTA, which induced the dissociation of DNA 2 (ABEI-labeled aptamer electrochemiluminescent probe) from DNA 1 and moved it far away from the electrode surface. Under the optimal conditions, the decreased ECL intensity was proportional to an OTA concentration ranging from 0.02 to 3.0 ng mL^-1, with a detection limit of 0.007 ng mL^-1. The relative standard deviation was 3.8% at 0.2 ng mL^-1 (n = 7). The proposed method has been applied to measure OTA in naturally contaminated wheat samples and validated by an official method. This work demonstrates the combination of a highly binding aptamer with a highly sensitive ECL technique to design an electrochemiluminescent biosensor, which is a very promising approach for the determination of small-molecule toxins.     

Electrochemical sensors for the simultaneous determination of zinc,cadmium and lead using a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode

A simple, low cost, and highly sensitive electrochemical sensor, based on a Nafion/ionic liquid/graphene composite modified screen-printed carbon electrode (N/IL/G/SPCE) was developed to determine zinc (Zn(II)), cadmium (Cd(II)), and lead (Pb(II)) simultaneously. This disposable electrode shows excellent conductivity and fast electron transfer kinetics. By in situ plating with a bismuth film (BiF), the developed electrode exhibited well-defined and separate peaks for Zn(II), Cd(II), and Pb(II) by square wave anodic stripping voltammetry (SWASV). Analytical characteristics of the BiF/N/IL/G/SPCE were explored with calibration curves which were found to be linear for Zn(II), Cd(II), and Pb(II) concentrations over the range from 0.1 to 100.0 ng L⁻¹. With an accumulation period of 120 s detection limits of 0.09 ng mL⁻¹, 0.06 ng L⁻¹ and 0.08 ng L⁻¹ were obtained for Zn(II), Cd(II) and Pb(II), respectively using the BiF/N/IL/G/SPCE sensor, calculated as 3σ value of the blank. In addition, the developed electrode displayed a good repeatability and reproducibility. The interference from other common ions associated with Zn(II), Cd(II) and Pb(II) detection could be effectively avoided. Finally, the proposed analytical procedure was applied to detect the trace metal ions in drinking water samples with satisfactory results which demonstrates the suitability of the BiF/N/IL/G/SPCE to detect heavy metals in water samples and the results agreed well with those obtained by inductively coupled plasma mass spectrometry.     

C18-attached membrane funnel-based spray ionization mass spectrometry for quantification of anti-diabetic drug from human plasma

In this work, sorbent-attached membrane funnel-based spray ionization mass spectrometry was explored for quantitative analysis of anti-diabetic drugs spiked in human plasma. C₁₈-attached membrane funnel was fabricated for in situ extraction and clean-up to alleviate matrix suppression effect in the ionization process. Repaglinide was used as a target analyte of anti-diabetic drugs. Under optimal working conditions, good linearity (R² > 0.99) was obtained in the concentration range of 1–100 ng mL⁻¹. The method detection limit of target drugs spiked in the human plasma was around 0.30 ng mL⁻¹. Through the application of an isotope-labeled internal standard, the signal fluctuation caused by residual background matrices was largely alleviated and the precision of measurement (RSD) was below 15%. The recovery of repaglinide for 5, 25, and 100 ng mL⁻¹ of spiked human plasma matrixes ranged from 87% to 112%. The developed method was successfully applied to determine repaglinide in plasma volunteers who orally received a dose of drug association. Our results demonstrated that membrane funnel-based spray is a simple and sensitive method for rapid screening analysis of complex biological samples.     

Development and Validation of Highly Sensitive LC–ESI-MS/MS Method for Bortezomib and Its Applications for Plasma Levels and Drug Content of Branded and Generic Formulations in India

In the present study, a highly sensitive and reproducible bio-analytical method was developed using LC–ESI-MS/MS to assess the lower plasma levels of bortezomib in multiple myeloma patients. The gradient elution was optimized using reverse-phase C18 column with mobile phases consisting of water and acetonitrile in 0.1% formic acid. Multiple reaction monitoring mode was used for quantification using precursor-to-product ion transition for bortezomib and sulfadiamethoxine was used as internal standard. This method was validated with a linearity range of 0.195–25 ng mL^?1. Intra-day and inter-day accuracy was 99.17–101.89% and 95.01–102.92% with precision of?<?9.87% and?<?8.77%, respectively. Bortezomib was stable in plasma samples stored at ? 80 °C for up to 10 months. The lower limit of quantification was found to be 0.195 ng mL^?1. This method was also found to be capable of quantifying bortezomib trough levels (ranging 0.19–0.7 ng mL^?1) in plasma of multiple myeloma patients post-cycle 1–6. Bortezomib content in the commonly prescribed generic formulations was also studied. The concentration in all formulations was within the 90–110% of the innovator, as prescribed by the USFDA, ruling out their role blood level variation. The study supports the use of this method for trough level estimation and therapeutic drug monitoring of bortezomib in multiple myeloma patients.

     

Construction of Modified Carbon Paste Electrode for Highly Sensitive Simultaneous Electrochemical Determination of Trace Amounts of Copper (II) and Cadmium (II)

A chemically modified electrode was constructed for rapid, simple, accurate, selective and highly sensitive simultaneous determination of Cu(II) and Cd(II) using square wave anodic stripping voltammetry. The electrode was prepared by incorporation of SiO₂ nanoparticles, coated with a newly synthesized Schiff base, in carbon paste electrode. The limit of detection was found to be 0.28 ng mL^?1 and 0.54 ng mL^?1 for Cu(II) and Cd(II), respectively. The proposed chemically modified electrode was used for the determination of copper and cadmium in several foodstuffs and water samples.     

Determination of vanadium(V) with CdTe quantum dots as fluorescent probes

CdTe quantum dots (QDs) were modified with thioglycolic acid (TGA) and synthesized in aqueous medium. The optimum fluorescence intensity was found to be at pH 6.24 with a CdTe QDs concentration of 4.96 × 10⁻⁷ mol L⁻¹. The quenched fluorescence intensity of CdTe QDs is linearly proportional to V(V) concentration from 10 to 200 ng mL⁻¹ with correlation coefficient R = 0.9985. The limit of detection for V(V) was 2.07 ng mL⁻¹. The proposed method was successfully applied to the analysis of trace amounts of V(V) in water samples with recovery of 96.5–101.8%, and the results were in good agreement with those of electrothermal atomic absorption spectrometry.     

Magnetic-particle-based,ultrasensitive chemiluminescence enzyme immunoassay for free prostate-specific antigen

We report a magnetic-particle (MMP)-based chemiluminescence enzyme immunoassay (CLEIA) for free prostate-specific antigen (f-PSA) in human serum. In this method, the f-PSA is sandwiched between the anti-PSA antibody coated MMPs and alkaline phosphatase (ALP)-labeled anti-f-PSA antibody. The signal produced by the emitted photons from the chemiluminescent substrate (4-methoxy-4-(3-phosphatephenyl)-spiro-(1,2-dioxetane-3,2′-adamantane)) is directly proportional to the amount of f-PSA in a sample. The present MMP-based assay can detect f-PSA in the range of 0.1–30 ng mL⁻¹ with the detection limit of 0.1 ng mL⁻¹. The linear detection range could match the concentration range within the “diagnostic gray zone” of serum f-PSA levels (4–10 ng mL⁻¹). The detection limit was sufficient for measuring clinically relevant f-PSA levels (>4 ng mL⁻¹). Furthermore, the method was highly selective; it was unaffected by cross-reaction with human glandular kallikrein-2, a kallikrein-like serine protease that is 80% similar to f-PSA. The proposed method was finally applied to determine f-PSA in 40 samples of human sera. Results obtained using the method showed high correlation with those obtained using a commercially available microplate CLEIA kit (correlation coefficient, 0.9821). This strategy shows great potential application in the fabrication of diagnostic kits for determining f-PSA in serum.     

FIA Determination of Paracetamol in Pharmaceutical Drugs by Using Gold Electrodes Modified with a 3‐Mercaptopropionic Acid Monolayer

A flow injection analysis (FIA) method for the determination of paracetamol in pharmaceutical drugs using a gold electrode modified with a self‐assembled monolayer (SAM) of 3‐mercaptopropionic acid is described. At optimized experimental conditions the dynamic concentration range was 0.15 to 15.0 mg L^?1 with a detection limit of 0.2 μg mL^?1 (S/N=3). The repeatability of current responses for injections of 10 μmol L^?1 paracetamol was evaluated to be 3.2% (n=30) and the analytical frequency was 180 h^?1. The lifetime of the modified electrode was found to be 15 days. The results obtained by using the proposed amperometric method for paracetamol determination in four different drug samples compared well with those found by spectrophotometry.     

A carbon nanotubes assisted strategy for insulin detection and insulin proteolysis assay

The carbon nanotubes (CNTs) assisted strategy has been proposed for insulin sensing and insulin proteolysis analysis. Experiments demonstrated that this strategy could be used for trace insulin determination with a low detection limit 7.75 ng mL⁻¹ (S/N = 3) and a detection range from 20 ng mL⁻¹ to 400 ng mL⁻¹. Both biocompatibility and intrinsic conductivity of pristine CNTs enabled them to act an excellent biosensing platform for the realization of direct electrochemistry and electrocatalysis of insulin. Compared with the present methods, the proposed strategy could realize the trace insulin detection without electrode modifications. It is more convenient and simpler than those based on the chemically modified electrodes. This method also made the CNTs as the indicator for insulin proteolysis analysis so that the biological process could be studied by electron microscope, electrochemical methods and digital camera. CNTs obtained after the proteolysis showed the same capabilities as the pristine ones in electrochemical signal enhancement and could participate in the bio-circle repeatedly.     

Label-free amperometric immunobiosensor based on a gold colloid and Prussian blue nanocomposite film modified carbon ionic liquid electrode

A novel experimental methodology based on a Prussian blue (PB) and gold nanoparticles (AuNPs) modified carbon ionic liquid electrode (CILE) was developed for use in a label-free amperometric immunosensor for the sensitive detection of human immunoglobulin G (HIgG) as a model protein. The CILE was fabricated by using the ionic liquid 1-octyl-3-methylimidazolium hexafluorophosphate as binder. Controllable electrodeposition of PB on the surface of the CILE and coating with 3-aminopropyl triethylene silane (APS) formed a film with high electronic catalytic activity and large surface area for the assembly of AuNPs and further immobilization of HIgG antibody. The electrochemistry of the formed nanocomposite biofilm was investigated by electrochemical techniques including cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy. The HIgG concentration was measured through the decrease of amperometric responses in the corresponding specific binding of antigen and antibody. The decreased differential pulse voltammetric values were proportional to the HIgG concentration in two ranges, 0.05–1.25 ng mL⁻¹ and 1.25–40 ng mL⁻¹, with a detection limit of 0.001 ng mL⁻¹ (S/N = 3). This electrochemical immunoassay combined the specificity of the immunological reaction with the sensitivity of the AuNPs, ionic liquid, and PB amplified electrochemical detection and would therefore be valuable for clinical immunoassays.     

Electrochemical sensor for heparin based on a poly(thionine) modified glassy carbon electrode

A poly(thionine) thin film modified electrode was successfully assembled on the surface of the glassy carbon electrode by means of electrochemical polymerization, which was carried out with cyclic voltammetric sweeping in the potential range 0 to +1.4 V (vs. Ag/AgCl) in perchloric acid solution containing 0.1 mmol L^?1 thionine. The film modified electrode exhibited a couple of well-defined redox peaks, and the redox peaks decreased correspondingly without a shift of the peak potential after the addition of heparin. The conditions of the binding reaction and the electrochemical detection were optimized. Under the optimum conditions the decrease of the peak current was proportional to the concentration of heparin in the range 4.0 to 22.0 μg mL^?1 and the detection limit was 0.28 μg mL^?1. The relative standard deviation (RSD) for five parallel determinations of 10.0 μg mL^?1 heparin was 0.93%. The effects of potentially interfering species were investigated and the method was successfully applied to the determination of heparin in a pharmaceutical formulation.     

Determination of mercury by electrochemical cold vapor generation atomic fluorescence spectrometry using polyaniline modified graphite electrode as cathode

An electrochemical cold vapor generation system with polyaniline modified graphite electrode as cathode material was developed for Hg (II) determination by coupling with atomic fluorescence spectrometry. This electrochemical cold vapor generation system with polyaniline/graphite electrode exhibited higher sensitivity; excellent stability and lower memory effect compared with graphite electrode electrochemical cold vapor generation system. The relative standard deviation was 2.7% for eleven consecutive measurements of 2 ng mL^− 1 Hg (II) standard solution and the mercury limit of detection for the sample blank solution was 1.3 рg mL^− 1 (3σ). The accuracy of the method was evaluated through analysis of the reference materials GBW09101 (Human hair) and GBW 08517 (Laminaria Japonica Aresch) and the proposed method was successfully applied to the analysis of human hairs.     

Rapid and sensitive spectrofluorimetric determination of enrofloxacin, levofloxacin and ofloxacin with 2,3,5,6-tetrachloro-p-benzoquinone

A highly sensitive spectrofluorimetric method was developed for the first time, for the analysis of three fluoroquinolones (FQ) antibacterials, namely enrofloxacin (ENR), levofloxacin (LEV) and ofloxacin (OFL) in pharmaceutical preparations through charge transfer (CT) complex formation with 2,3,5,6-tetrachloro-p-benzoquinone (chloranil,CLA). At the optimum reaction conditions, the FQ–CLA complexes showed excitation maxima ranging from 359 to 363 nm and emission maxima ranging from 442 to 488 nm.Rectilinear calibration graphs were obtained in the concentration range of 50–1000, 50–1000 and 25–500 ng mL⁻¹ for ENR, LEV and OFL, respectively.The detection limit was found to be 17 ng mL⁻¹ for ENR, 17 ng mL⁻¹ for LEV, 8 ng mL⁻¹ for OFL, respectively. Excipients used as additive in commercial formulations did not interfere in the analysis. The method was validated according to the ICH guidelines with respect to specificity, linearity, accuracy, precision and robustness. The proposed method was successfully applied to the analysis of pharmaceutical preparations. The results obtained were in good agreement with those obtained using the official method; no significant difference in the accuracy and precision as revealed by the accepted values of t- and F-tests, respectively.     

Colorimetric detection of kanamycin based on analyte-protected silver nanoparticles and aptamer-selective sensing mechanism

In this work, a novel colorimetric detection method for kanamycin (Kana), a widely used aminoglycoside antibiotic, has been developed using unmodified silver nanoparticles (AgNPs) as sensing probe. The method is designed based on the finding that the analyte (Kana) can protect AgNPs against salt-induced aggregation, and nucleic acid aptamers can decrease the risk of false positives through an aptamer-selective sensing mechanism. By use of the proposed method, selective quantification of Kana can be achieved over the concentration range from 0.05 to 0.6 μg mL⁻¹ within 20 min. The detection limit is estimated to be 2.6 ng mL⁻¹, which is much lower than the allowed maximum residue limit. Further studies also demonstrate the applicability of the proposed method in milk samples, revealing that the method may possess enormous potential for practical detection of Kana in the future.     

A designer ormosil gel for preparation of sensitive immunosensor for carcinoembryonic antigen based on simple direct electron transfer

The excellent direct electron transfer (DET) of enzyme labeled to antibody immobilized in designer organically modified silicate (ormosil) sol–gel was achieved at an electrode, which was used to construct a novel reagentless immunosensor for antigen determination. The synthesized ormosil architecture provided a hydrophilic interface for retaining the activity of immobilized enzyme labeled immunocomponent. The proposed immunosensor for carcinoembryonic antigen (CEA) prepared by immobilizing horseradish peroxidase-labeled CEA antibody (HRP-anti-CEA) in the architecture showed a surface-controlled electrode process attributed to the DET between electrode and HRP with a rate constant of 5.94 ± 0.40 s⁻¹. The formation of immunocomplex upon incubation in CEA or sample solution led to block of DET and linearly decrease in voltammetric response over CEA concentration ranging from 0.5 to 3.0 and 3.0 to 120 ng ml⁻¹. The limit of detection for CEA was 0.4 ng ml⁻¹. The immunosensor showed good accuracy and acceptable storage stability, precision and reproducibility. The proposed method was simple, low-cost and potentially attractive for clinical immunoassays.     

A disposable chronocoulometric sensor for heavy metal ions using a diaminoterthiophene-modified electrode doped with graphene oxide

The rapid simultaneous determination of cadmium, lead, copper, and mercury ions is performed by employing a disposable sensor modified with graphene oxide (GO) doped diaminoterthiophene (GO/DTT) for chronocoulometry (CC). The performances of CC with and without pre-deposition in two opposite potential step directions were compared with square wave anodic stripping voltammetry (SWASV) under various conditions. The surface of the GO/DTT modified screen print carbon electrode (SPCE) was characterized by SEM, EDXS, and electrochemical impedance spectroscopy (EIS). Experimental variables that affect the response signal such as the pH, deposition time, type of supporting electrolyte, concentration of DTT, content ratio of GO to DTT, and Nafion content were optimized. Interference effects due to other heavy metal ions were also investigated. The dynamic ranges of SWASV and CC were between 1 ng mL⁻¹ and 2.5 μg mL⁻¹ and between 1 ng mL⁻¹ and 10 μg mL⁻¹, respectively. The detection limits for Cd²⁺, Pb²⁺, Cu²⁺, Hg²⁺ ions were 1.9 ± 0.4 ng mL⁻¹, 2.8 ± 0.6 ng mL⁻¹, 0.8 ± 0.2 ng mL⁻¹, and 2.6 ± 0.9 ng mL⁻¹ for the CC stripping method; 2.6 ± 0.2 ng mL⁻¹, 0.5 ± 0.1 ng mL⁻¹, 1.8 ± 0.3 ng mL⁻¹, and 3.2 ± 0.3 ng mL⁻¹ for the CC deposition method; and 7.1 ± 0.9, 1.9 ± 0.3, 0.4 ± 0.1, and 0.7 ± 0.1 ng mL⁻¹ for SWASV. The reliability of the method for point-of-analysis was evaluated by analyzing a urine standard reference material and some water samples.     

Anti-idiotypic nanobody-alkaline phosphatase fusion proteins: Development of a one-step competitive enzyme immunoassay for fumonisin B1 detection in cereal

A rapid and sensitive one-step competitive enzyme immunoassay for the detection of FB₁ was developed. The anti-idiotypic nanobody–alkaline phosphatase (Ab2β−Nb−AP) was validated by the AP enzyme activity and the properties of bounding to anti-FB1-mAb (3F11) through colorimetric and chemiluminescence analyses. The 50% inhibitory concentration and the detection limit (LOD) of colorimetric enzyme-linked immunosorbent assay (ELISA) for FB₁ were 2.69 and 0.35 ng mL⁻¹, respectively, with a linear range of 0.93–7.73 ng mL⁻¹. The LOD of the chemiluminescence ELISA (CLIA) was 0.12 ng mL⁻¹, and the IC₅₀ was 0.89 ± 0.09 ng mL⁻¹ with a linear range of 0.29–2.68 ng mL⁻¹. Compared with LC-MS/MS, the results of this assay indicated the reliability of the Ab2β−Nb−AP fusion protein based one-step competitive immunoassay for monitoring FB₁ contamination in cereals. The Ab2β−Nb−AP fusion proteins have the potential to replace chemically-coupled probes in competitive enzyme immunoassay systems.     

Electrospun zeolitic imidazolate framework-8/poly(lactic acid) nanofibers for pipette-tip micro-solid phase extraction of carbamate insecticides from environmental samples

In the present study, electrospun zeolitic imidazolate framework-8/poly(lactic acid) nanofibers were successfully synthesized and characterized as a potential nanosorbent for the pipette-tip micro-solid phase extraction of chlorpropham, pirimicarb, carbaryl, and methiocarb carbamate insecticides from environmental water samples. The extraction procedure was followed by gas chromatography/mass spectrometry separation and determination of the target analytes. All the effective parameters of the extraction procedure were optimized through the one variable at-a-time method. Thanks to the very simple extraction procedure as well as the application of electrospun nanofibers with high surface area, the four analytes were efficiently extracted with as lowest extraction times as practicable. Under the optimal conditions, the calibration plots of the analytes were obtained within broad linear dynamic ranges of 0.5 – 150 ng mL^?1 for chlorpropham and pirimicarb plus 1.0 – 175 ng mL^?1 for carbaryl and methiocarb, respectively. Besides, limits of detection as low as 0.2 and 0.15 ng mL^?1 for chlorpropham and pirimicarb, respectively, as well as 0.5 ng mL^?1 for carbaryl and methiocarb indicate the favorable sensitivity of the analytical procedure. The applicability of the developed method was evaluated by quantitative determination of the target analytes in four different environmental water samples. Relative recoveries higher than 88.0% shows the acceptable accuracy of the method in the quantitative determination of the four carbamate insecticides.     

Surface plasmon resonance aided electrochemical immunosensor for CK-MB determination in undiluted serum samples

This article presents a simple chronoamperometric immunosensor for the quantitative assessment of creatine kinase MB (CK-MB) in 50 μL undiluted serum samples. The immunosensor consists of gold working and counter electrodes patterned onto a glass chip by thin-film photolithography and an external Ag|AgCl reference electrode. The detection limit (DL) of the chronoamperometric method is 13 ng mL⁻¹ (DL = 2×RMSD/S, where RMSD is the residual mean standard deviation of the measured points around a calibration curve with a slope of S). In spiked serum samples, the response was linear up to 300 ng mL⁻¹ of CK-MB. A surface plasmon resonance (SPR) system with simultaneous electrochemical detection (EC-SPR) aided the development of the sandwich immunoassay. Real-time monitoring of the SPR signal was used to optimize the capture antibody immobilization, CK-MB and detection antibody binding, as well as to minimize the nonspecific adsorption of serum proteins to the sensor surface. The detection antibody has been labeled with alkaline phosphatase (ALP) enzyme for sensitive electrochemical detection. ALP catalyzes the hydrolysis of ascorbic acid phosphate and generates ascorbic acid, which is measured chronoamperometrically. The electrochemical immunoassay for CK-MB was less sensitive to nonspecific adsorption related interferences, had a better detection limit, and required a lower volume of sample than the SPR method.