A signal amplification by QDs used for ferrocene-labeled sandwich aptasensor for determination of Hg2+ in water samples

In this paper, the design of a novel sandwich-type electrochemical aptasensor was reported for an ultrasensitive mercury ion (Hg²⁺) detection in water samples, which labeled with two-labeled aptamer (Apt) sequences. The used Apts were Apt1 and Apt2 as the capture and signal probe, respectively. The Apt1 probe was immobilized on the poly(4-aminobenzoic acid) (p-ABA) and quantum dots (QDs) film as the platform, as well as the Apt2 reporter was labeled with ferrocene. In the presence of Hg²⁺, the strong coordination complex has been formed between the specific thymine of the Apt1, Hg²⁺, as well as the thymine of the Apt as T–Hg²⁺–T adduct. The QDs and p-ABA were applied for increasing the conductivity of platform and suitable binding of the recognition elements. Under the optimized conditions, the constructed aptasensor illustrated either a wide linear relationship between the logarithm of Hg²⁺ concentration and current, from 0.05 to 100 nM and also an excellent low limit of detection of 0.01 nM. The quality of carefully choosing, an excellent stability and specificity sensitivity of the designed aptasensor, was investigated by spiked tap water samples as real sample. Moreover, the aptasensor exhibits the good reproducibility as well as has high selectivity for the other cations. The recoveries of the Hg²⁺ assay of the tap water samples were acquired satisfactorily which imply the generated aptasensor can use Hg²⁺ measurement in the real laboratories.

     

Ultrasensitive and rapid screening of mercury(II) ions by dual labeling colorimetric method in aqueous samples and applications in mercury-poisoned animal tissues

Rapid and ultrasensitive detection of trace heavy metal mercury(II) ions (Hg²⁺) are of significant importance due to the induced serious risks for environment and human health. This presented article reports the gold nanoparticle-based dual labeling colorimetric method (Dual-COLO) for ultrasensitive and rapid detection of Hg²⁺ using the specific thymine–Hg²⁺–thymine (T–Hg²⁺–T) as recognition system and the dual labeling strategy for signal amplification. Both qualitative and quantitative detections of Hg²⁺ are achieved successfully in aqueous samples. More importantly, the achieved detection limit of 0.005 ng mL⁻¹ (0.025 nM) without any instruments is very competitive to other rapid detection methods even ICP-MS based methods. This Dual-COLO method is also applied directly for real water sample monitoring and, more importantly, applied in analysis of mercury poisoned animal tissues and body fluidic samples, indicating a potentially powerful and promising tool for environmental monitoring and food safety control.     

Spectrofluorometric Determination of Mercury and Lead by Colloidal CdS Nanomaterial

Heavy metal ions such as Hg and Pb are hazardous due to very high toxicity, mobility, and ability to accumulate through the food chain or atmosphere in the environment system. Therefore, ultrasensitive determination of mercury and lead is important to provide an evaluation index of ions in aqueous environment. This paper describes the investigation of surface modified quantum dots (QDs) as a sensing receptor for Hg²⁺ and Pb²⁺ ion detection by optical approach. Water-soluble L-cysteine-capped CdS QDs have been synthesized in aqueous medium. These functionalized nanoparticles were used as a fluorescence sensor for Hg²⁺ and Pb²⁺ ions, involved in the fluorescence quenching. The effect of foreign ions on the intensity of CdS QDs showed a low interference response toward other metal ions except Cu²⁺ and Fe²⁺ ions. The limit of detection (LOD) of this system is found to be 1.0 and 3.0 nM for Hg²⁺ and Pb²⁺ ions, respectively.     

Ultrasensitive detection of mercury(II) ion using CdTe quantum dots in sol-gel-derived silica spheres coated with calix[6]arene as fluorescent probes

We have developed a simple method for the preparation of highly fluorescent and stable, water-soluble CdTe quantum dots in sol-gel-derived composite silica spheres that were coated with calix[6]arene. The resulting nanoparticles (NP) were characterized in terms of UV, fluorescence and FT-IR spectroscopy and by TEM. The results show that the new NPs display more intense fluorescence intensity and are more stable than its precursors of the type SiO₂/CdTe. In addition, the new NPs exhibit a higher selectivity for the determination of Hg²⁺ than for other metal ions. Under the optimum conditions, the relative fluorescence intensity decreases with the concentration of Hg²⁺ in the range from 2.0 to 14.0?nmol?L^?1 and the detection limit is 1.55?nmol?L^?1. The method is based on the quenching of fluorescence by Hg²⁺ and expected to serve as a practical fluorescence test for rapid detection of Hg²⁺. A mechanism is suggested to explain the inclusion process by a Langmuir binding isotherm, and fluorescence quenching is best described by the Stern-Volmer equation.

1,2-dithioglycol functionalised carbon nitride quantum dots as a “turn – off” fluorescent sensor for mercury ion detection

A kind of 1,2-dithioglycol (DTG) functionalised carbon nitride quantum dots (DTG-CNQDs) was designed for the first time by modifying DTG on the surface of carbon nitride quantum dots (CNQDs). The as-prepared DTG-CNQDs exhibit strong blue fluorescence under ultraviolet light and have a high quantum yield of 27%. Experiments show that Hg²⁺ has a good quenching effect on the fluorescence of DTG-CNQDs. In phosphate buffer (PBS, 10 mM, pH 6.0), the fluorescence quenching rate (F₀/F) has a good linear relationship with the concentration of Hg²⁺ in the range of 0.020–0.50 μM with detection limit of 0.63 nM. This fluorescent probe possesses high sensitivity and good selectivity, which can be applied in the rapid detection of Hg²⁺ in tap and lake water samples.     

Synchronous determination of mercury (II) and copper (II) based on quantum dots-multilayer film

A sensitive sensor for mercury (II) and copper (II) synchronous detection was established via the changed photoluminescence of CdTe quantum dots (QDs) multilayer films in this work. QDs were deposited on the quartz slides to form QDs-multilayer films by electrostatic interactions with poly(dimethyldiallyl ammonium chloride) (PDDA). Hg²⁺ or Cu²⁺ could quench the photoluminescence of the QDs-multilayer films, and glutathione (GSH) was used to remove Hg²⁺ or Cu²⁺ from QDs-multilayer films due to strong affinity of GSH-metal ions, which resulted in the recovered photoluminescence of QDs-multilayer films. There are good linear relationships between the metal ions concentration and the photoluminescence intensity of QDs in the quenched and recovered process. It was found that the Stern–Volmer constants for Hg²⁺ are higher than that for Cu²⁺. Based on different quenching and recovery constant between Hg²⁺ and Cu²⁺, the synchronous detection of Hg²⁺ and Cu²⁺ can be achieved. The linear ranges of this assay were obtained from 0.005 to 0.5 μM for Hg²⁺ and from 0.01 to 1 μM for Cu²⁺, respectively. And the artificial water samples were determined by this method with satisfactory results, the recoveries for Hg²⁺ and Cu²⁺ ions were found in the range of 90.4–106.4%. To the best of our knowledge, it is the first report about the synchronous detection of Hg²⁺ and Cu²⁺ by using quenched and recovered photoluminescence of quantum dots multilayer films.     

2-(2′-Hydroxyphenyl)-4(3H)-quinazolinone derivatives based fluorescent probes for mercury(II) via an intramolecular proton transfer mechanism

2-(2′,5′-Dihydroxy-phenyl)-4(3H)-quinazolinone (DHPQ), a new fluorescent dye that exhibits excited state intramolecular proton transfer (ESIPT) reaction and possesses good photophysical properties, is synthesised and used as fluorescent probe for detection of Hg²⁺. Mercuric ions can be detected and quantitated by measuring the fluorescent intensity decrease of the probe. The decrease of fluorescence intensity of DHPQ upon the addition of Hg²⁺ was attributed to the blocking of ESIPT reactions of DHPQ and quenching its fluorescence. The analytical performance characteristics of the proposed Hg²⁺ probe were investigated. The probe can be applied to the quantification of Hg²⁺ with a concentration range covering from 8.0?×?10^?7 to 2.0?×?10^?4?mol?L^?1, with a working pH range of 5.5–6.5. It shows excellent selectivity for Hg²⁺ over other transition metal cations. The proposed method was testified for the Hg²⁺ assay in river water samples with satisfying recoveries.     

High Sensibility of Quantum Dots to Metal Ions Inspired by Hydroxyapatite Microbeads

An approach for the sensitive and selective determination of Ag⁺, Cu²⁺ and Hg²⁺ ions was developed based on the fluorescence quenching of mercaptopropionic acid (MPA) capped CdTe quantum dots in the existence of hydroxyapatite (HAP) nanoribbon spherulites. Among various metal ions investigated, it was found that the fluorescence of CdTe QDs was only sensitive to Ag⁺, Cu²⁺ and Hg²⁺ ions. The addition of HAP into the CdTe system could bring forward a sensitivity improvement of about 1 to 2 orders of magnitude in the detection of Ag⁺ and Cu²⁺ compared with the plain CdTe system without the existence of HAP; while there was no sensitization effect for Hg²⁺. Under optimal conditions, the detection limits for Ag⁺, Cu²⁺ and Hg²⁺ were 20, 56 and 3.0 nmol·L^?1, respectively, and the linear ranges were 0.02–50, 0.056–54 and 0.003–2.4 µmol·L^?1, respectively. Mechanisms of both QDs fluorescence quenching by metal ions and the sensitization effect by HAP were also discussed.     

Cytidine-stabilized gold nanocluster as a fluorescence turn-on and turn-off probe for dual functional detection of Ag and Hg

In this study, we have developed a label-free, dual functional detection strategy for highly selective and sensitive determination of aqueous Ag⁺ and Hg²⁺ by using cytidine stabilized Au NCs and AuAg NCs as fluorescent turn-on and turn off probes, respectively. The Au NCs and AuAg NCs showed a remarkably rapid response and high selectivity for Ag⁺ and Hg²⁺ over other metal ions, and relevant detection limit of Ag⁺ and Hg²⁺ is ca. 10 nM and 30 nM, respectively. Importantly, the fluorescence enhanced Au NCs by doping Ag⁺ can be conveniently reusable for the detection of Hg²⁺ based on the corresponding fluorescence quenching. The sensing mechanism was based on the high-affinity metallophilic Hg²⁺–Ag⁺ interaction, which effectively quenched the fluorescence of AuAg NCs. Furthermore, these fluorescent nanoprobes could be readily applied to Ag⁺ and Hg²⁺ detection in environmental water samples, indicating their possibility to be utilized as a convenient, dual functional, rapid response, and label-free fluorescence sensor for related environmental and health monitoring.     

One-pot electrochemical synthesis of functionalized fluorescent carbon dots and their selective sensing for mercury ion

We propose a simple, economical, and one-pot method to synthesize water-soluble functionalized fluorescent carbon dots (C-Dots) through electrochemical carbonization of sodium citrate and urea. The as-prepared C-Dots have good photostability and exhibit a high quantum yield of 11.9%. The sizes of the C-Dots are mainly distributed in the range of 1.0–3.5 nm with an average size of 2.4 nm. It has been further used as a novel label-free sensing probe for selective detection of Hg²⁺ ions with detection limit as low as 3.3 nM. The detection linear range is 0.01–10 μM. The as-prepared C-Dots are also successfully applied for the determination of Hg²⁺ in real water samples.     

Ultrasensitive Silicon Nanoparticle Ratiometric Fluorescence Determination of Mercury(II)

A novel ratiometric fluorescence sensing system for the ultrasensitive detection of Hg²⁺ was developed. It used aminofunctionalized silicon nanoparticles and rhodamine B, which exhibit two distinct fluorescence emission peaks at 449 and 581?nm, respectively, under a single excitation wavelength (350?nm). The fluorescence of the amino-functionalized silicon nanoparticles was selectively quenched by Hg²⁺, while that of rhodamine B was insensitive to Hg²⁺. The ratio of fluorescence intensities at 449–581?nm linearly decreased with increasing concentrations of Hg²⁺ from 0.005–0.1 and 0.1–7?µM within 0.5?min, and a detection limit as low as 3.3?nM was achieved. Moreover, the ratiometric fluorescence sensing system exhibited good selectivity toward Hg²⁺ over other metal ions with relatively low background interference, even in a complex matrix such as lake water. Most importantly, the practical use of this sensing system for Hg²⁺ detection in real water samples was also demonstrated.     

Fluorescence turn-on chemodosimeter for rapid detection of mercury (II) ions in aqueous solution and blood from mice with toxicosis

The heavy metal mercury (Hg) is a threat to the health of people and wildlife in many environments. Among various chemical forms, Hg²⁺ salts are usually more toxic than their counterparts because of their greater solubility in water; thus, they are more readily absorbed from the gastrointestinal tract into circulation. Therefore, new chemical receptors for detecting Hg²⁺ ions in circulation are needed. In this study, we developed a rhodamine-based turn-on fluorescence probe to monitor Hg²⁺ in aqueous solution and in blood of mice with toxicosis. The chemodosimeter responds to Hg²⁺ ions stoichiometrically, rapidly, and irreversibly at room temperature as a result of a chemical reaction that produces strongly fluorescent oxadiazole. The new fluorescent probe shows good fluorescence response, with high sensitivity and selectivity, toward Hg²⁺ ions in aqueous solution and in blood from mice with toxicosis and facilitates the naked-eye detection of Hg²⁺ ions.     

In Situ Generation of AgI Quantum Dots by the Confinement of A Supramolecular Polymer Network: A Novel Approach for Ultrasensitive Response

A novel approach for in situ generation of AgI quantum dots by the confinement of a pillar[5]arene‐based supramolecular polymer network has been successfully developed. The supramolecular polymer network ( SPN‐QP ) was constructed by using a bis‐8‐hydroxyquinoline‐modified pillar[5]arene derivative as a host ( H‐QP ) and a bis‐pyridinium‐modified decane as guest ( G‐PD ). The SPN‐QP shows ultrasensitive response for Ag⁺. The limit of detection is about 7.44×10^?9 M.^.Interestingly, when I^? was added to the SPN‐QP +Ag⁺ system, an unexpected strong warm‐white fluorescence emission was observed. After carefu investigation, we found that the strong warm‐white fluorescence emission could be attributed to the in situ formation of AgI quantum dots under the confinement of the supramolecular polymer network ( SPN‐QP ). Based on this approach, ultrasensitive detection of I^? was realized. The limit of detection for I^? is 4.40×10^?9 M. This study provides a new way for the preparation of quantum dots under the confinement of supramolecular polymer network as well as ultrasensitive detection of ions by in situ formation of quantum dots.     

SERS-based mercury ion detections: principles,strategies and recent advances

Mercury ion (Hg²⁺), known as one of the highly toxic and soluble heavy metal ions, is causing serious environmental pollution and irreversible damage to the health. It is urgent to develop some rapid and ultrasensitive methods for detecting trace mercury ions in the environment especially drink water. Surface-enhanced Raman scattering (SERS) is considered as a novel and powerful optical analysis technique since it has the significant advantages of ultra-sensitivity and high specificity. In recent years, the SERS technique and its application in the detection of Hg²⁺ have become more prevalent and compelling. This review provides an overall survey of the development of SERS-based Hg²⁺ detections and presents a summary relating to the basic principles, detection strategies, recent advances and current challenges of SERS for Hg²⁺ detections.     

A competitive immunoassay for ultrasensitive detection of Hg in water,human serum and urine samples using immunochromatographic test based on surface-enhanced Raman scattering

An immunochromatographic test (ICT) strip was developed for ultrasensitive competitive immunoassay of Hg²⁺. This strategy was achieved by combining the easy-operation and rapidity of ICT with the high sensitivity of surface-enhanced Raman scattering (SERS). Monoclonal antibody (mAb) against Hg²⁺ and Raman active substance 4-mercaptobenzoic acid (MBA) dual labelled gold nanoparticles (GNPs) were prepared as an immunoprobe. The Raman scattering intensity of MBA on the test line of the ICT strip was measured for quantitative determination of Hg²⁺. The ICT was able to directly detect Hg²⁺ without complexing due to the specific recognition of the mAb with Hg²⁺. The IC₅₀ and limit of detection (LOD) of the assay for Hg²⁺ detection were 0.12 ng mL⁻¹ and 0.45 pg mL⁻¹, respectively. There was no cross-reactivity (CR) of the assay with other nineteen ions and the ICT strips could be kept for 5 weeks without loss of activity. The recoveries of the assay for water, human serum and urine samples spiked with Hg²⁺ were in range of 88.3–107.3% with the relative standard deviations (RSD) of 1.5–9.5% (n = 3). The proposed ICT was used for the detection of Hg²⁺ in urine samples collected from Occupational Disease Hospital and the results were confirmed by cold-vapor atomic fluorescence spectroscopy (CV-AFS). The assay exhibited high sensitivity, selectivity, stability, precision and accuracy, demonstrating a promising method for the detection of trace amount of Hg²⁺ in environmental water samples and biological serum and urine samples.     

Fluorescent Gold Clusters as Logic Gates for the Detection of Different Metal Ions

Metal cations can be selectively detected by restoring and quenching the fluorescent intensity of an “ON–OFF” gold nanocluster (Au NC ) sensor. The fluorescent intensity of Au NCs with metal cations can be restored by chelating with ethylenediaminetetraacetic acid except for Hg²⁺ ions. A highly selective detection of Hg²⁺ ion is also achieved under the coexistence of Fe³⁺ or Cr³⁺ ions. This assay was applied successfully for detecting Hg²⁺ in a water sample. The dynamic range of the system was 1 ppm to 25 ppb, and the limit of detection was 25 ppb.     

A novel Hg2+ fluorescence sensor TPE-TSC based on aggregation-induced emission

Abstract

A fluorescent sensor TPE-TSC with aggregation induced emission (AIE) characteristic is synthesized for detecting Hg²⁺ by attaching thiosemicarbazide (TSC) unit into tetraphenylethylene (TPE) group. TPE-TSC exhibits intense green emission in DMSO/H₂O (V:V?=?1:9) solution with the formation of the aggregation. TPE-TSC shows outstanding fluorescence quenching toward Hg²⁺ over other metal ions due to the formation of complex TPE-TSC/Hg²⁺ with a 2:1 binding ratio. The detection limit of TPE-TSC for Hg²⁺ is 1?×?10^?5 mol·L^?1.     

Oxygen accelerated scalable synthesis of highly fluorescent sulfur quantum dots

Here, we report a facile and efficient approach for the large-scale synthesis of highly fluorescent sulfur quantum dots (SQDs) from inexpensive elemental sulfur under a pure oxygen (O₂) atmosphere. The important finding of this work is that the polysulfide (S_x²⁻) ions could be oxidized to zero-valent sulfur (S[0]) by O₂, which is the accelerator of the reaction. The SQDs prepared by this method possess nearly monodisperse size (1.5–4 nm), high fluorescence quantum yield (21.5%), tunable emission, and stable fluorescence against pH change, ionic strength variation and long-term storage. Moreover, the reaction yield of SQDs reached as high as 5.08% based on the content of S element in SQDs, which is much higher than other reported approaches (generally <1%). The prepared SQDs could be easily processed for widespread applications thanks to their low toxicity and superior dispersibility both in water and common organic solvents. These high-quality SQDs may find applications similar to or beyond those of carbon QDs and silicon QDs.

Highly fluorescent sulfur quantum dots could be rapidly and massively synthesized from inexpensive elemental sulfur under a pure O₂ atmosphere.     

Silole‐Infiltrated Photonic Crystal Films as Effective Fluorescence Sensor for Fe3+ and Hg2+

We develop a highly effective silole‐infiltrated photonic crystal (PC) film fluorescence sensor with high sensitivity, good selectivity and excellent reproducibility for Fe³⁺ and Hg²⁺ ions. Hexaphenylsilole (HPS) infiltrated PCs show amplified fluorescence due to the slow photon effect of PC because the emission wavelength of HPS is at the blue band edge of the selected PC’s stopband. The fluorescence can be quenched significantly by Fe³⁺/Hg²⁺ ions owing to electron transfer between HPS and metal ions. The amplified fluorescence enhances the sensitivity of detection, with a detection limit of 5 nM for Fe³⁺/Hg²⁺ ions. The sensor is negligibly responsive to other metal ions and can easily be reproduced by rinsing with pure water due to the special surface wettability of PC. As a result, a highly effective Fe³⁺/Hg²⁺ ions sensor based on HPS‐infiltrated PC film has been achieved, which will be important for effective and practical detection of heavy metal ions.     

An Aurone‐derived Low‐molecular‐weight Fluorescence Probe for the Detection of Hg2+ in Aqueous Solution and Living Cells

A low‐molecular‐weight fluorescent probe 1 (M.W. = 238.24) based on aurone was synthesized, and its application in fluorescent detection of Hg²⁺ in aqueous solution and living cells was reported. It exhibited an “on–off” fluorescent response toward Hg²⁺ in aqueous solution. Both the color and fluorescence changes of the probe were remarkably specific for Hg²⁺ in the presence of other common metal ions, satisfying the selective requirements for biomedical and environmental monitoring application. The probe has been applied in direct measurement of Hg²⁺ content in river water samples and imaging of Hg²⁺ in living cells, which further indicates the potential application values in environmental and biological systems.