Investigation of Sr uptake by birnessite-type sorbents from seawater

Sorption of micro- and microamounts of Sr from seawater has been studied using granulated Na-birnessite. Distribution coefficients of ⁹⁰Sr in the natural seawater are 0.8–1.2?×?10³ ml g^?1, in the model seawater they are 1.6–1.8?×?10³ ml g^?1. Application of Na-birnessite was shown to be prospective in sorption–desorption–regeneration regime. In dynamic sorption conditions, over 150 bed volumes of seawater can be purified till 5% breakthrough occurs at feed rate 10 BV h^?1. Na-birnessite can be used for ⁹⁰Sr radionuclide removal from liquid radioactive wastes containing seawater.

     

Simultaneous Voltammetric Detection of Salsolinol and Uric Acid in the Presence of High Concentration of Ascorbic Acid with Gold Nanoparticles/Functionalized Multiwalled Carbon Nanotubes Composite Film Modified Electrode

This work demonstrates gold nanoparticles (AuNPs)/functionalized multiwalled carbon nanotubes (f‐MWCNT) composite film modified gold electrode via covalent‐bonding interaction self‐assembly technique for simultaneous determination of salsolinol (Sal) and uric Acid (UA) in the presence of high concentration of ascorbic acid (AA). In pH 7.0 PBS, the composite film modified electrode exhibits excellent voltammetric response for Sal and UA, while AA shows no voltammetric response. The oxidation peak current is linearly increased with concentrations of Sal from 0.24–11.76 μmol L^?1 and of UA from 3.36–96.36 μmol L^?1, respectively. The detection limits of Sal and UA is 3.2×10^?8 mol L^?1 and 1.7×10^?7 mol L^?1 , respectively.     

Antibacterial,DFT and molecular docking studies of metformin complex as active material for the fabrication of copper (II) selective potentiometric sensor

The prepared and characterized metformin ‐copper (II) complex was used as elecroactive material for modification of a new sensitive and selective modified carbon paste electrode (MCPE) for the potentiometric determination of copper (II) in water samples. The performance characteristics of MCPE were carried out. The electrode showed perfect potentiometric response for Cu (II) over concentration range of 1.0 × 10^?6 – 5.0 × 10^?2 mol L^?1 with a detection limit of 1.0 × 10^?6 mol L^?1 with divalent slope value 30.8 ± 0.92 mV decade^?1 over the pH range of 2–6 and exhibits fast response time of 9 s. Also, this electrode exhibited good selectivity towards Cu (II) ions with respect to other metal ions. The obtained results using the proposed electrode were in a good agreement with those obtained using the inductively coupled plasma (ICP) method.     

Optimizing adsorptive removal of malachite green and methyl orange dyes from simulated wastewater by Mn‐doped CuO‐Nanoparticles loaded on activated carbon using CCD‐RSM: Mechanism,regeneration, isotherm,kinetic, and thermodynamic studies

In the present work, Mn‐doped CuO‐NPs‐AC was prepared by a simple method, characterized using various techniques such as FESEM, EDX, XRD, PSD, and pH_pzc and finally used for the adsorption of malachite green (MG) and methyl orange (MO) in a number of single and binary solutions. A series of adsorption experiments were conducted to investigate and optimize the influence of various factors (such as different pH, concentration of MG and MO, adsorbent mass, and sonication time) on the simultaneous adsorption of MG and MO using response surface methodology. Under optimal conditions of pH 10, adsorbent dose of 0.02 g, MG concentration of 30 mg L^?1, MO concentration of 30 mg L^?1, and sonication time of 4.5 min at room temperature, the maximum predicted adsorption was observed to be 100.0%, for both MG and MO, showing that there is a favorable harmony between the experimental data and model predictions. The adsorption isotherm of MO and MG by Mn‐doped CuO‐NPs‐AC could be well clarified by the Langmuir model with maximum adsorption capacity of 320.69 mg g^?1 and 290.11 mg g^?1 in the single solution and 233.02 mg g^?1 and 205.53 mg g^?1 in the binary solution by 0.005 g of adsorbent mass for MG and MO, respectively. Kinetic studies also revealed that both MG and MO adsorption were better defined by the pseudo‐second order model for both solutions. In addition, the thermodynamic constant studies disclosed that the adsorption of MG and MO was likely to be influenced by a physisorption mechanism. Eventually, the reusability of the Mn‐doped CuO‐NPs‐AC after six times showed a reduction in the adsorption percentage of MG and MO.     

Chitosan impregnated Ca-alginate: a new hybrid material for removal of uranium from potable water

Novel sorbent, chitosan impregnated calcium alginate (Cal-Alg-Chi) bead was developed to sorb uranium from potable water without compromising water quality parameters. The uptake study in batch mode, showed more than 98% sorption of uranium in the concentration range of 0.1–50 µg mL⁻¹. Cal-Alg-Chi beads, reduced the concentration of uranium below 15 ng mL⁻¹ from 100 to 450 ng mL⁻¹ in groundwater collected from effected regions in India. Sorption isotherm followed Langmuir model and maximum sorption capacity was evaluated as 36.04 mg g⁻¹. The sorption was endothermic with ΔG ⁰ value of −9.76 kJ mol⁻¹ and kinetics followed pseudo-second order rate law.

     

Novel 1,8-naphthalimide dye for multichannel sensing of H<Superscript>+</Superscript> and Cu<Superscript>2+</Superscript>

A novel 1,8-naphthalimide dye with simple structure has been produced by a facile synthetic method for colorimetric and fluorescent sensing of H⁺ and Cu²⁺. In CH₃CN/H₂O (1/1, v/v), the dye could monitor H⁺ using dual channels (ratiometric absorbance and fluorescence intensity change) from pH 6.2 to 12.0. Meanwhile, in the pH range of 1.9–5.2, the dye could also be used to detect Cu²⁺ using triple channels [ultraviolet–visible (UV–Vis) absorption, fluorescence intensity reduction, as well as fluorescence blueshift]. The detection limits for Cu²⁺ evaluated by colorimetric and fluorescent titration were 6.10 × 10^?7 and 2.62 × 10^?7 M, respectively. The dye exhibited specific selectivity and sensitivity for H⁺ and Cu²⁺ over various coexisting metal ions. Moreover, the sensing mechanism of the dye for H⁺ and Cu²⁺ was carefully examined.     

Determination of monomers and oligomers in polyethylene terephthalate trays and bottles for food use by using high performance liquid chromatography-electrospray ionization-mass spectrometry

The types and contents of monomers and oligomers in polyethylene terephthalate (PET) food containers were analyzed using HPLC-ESI-MS after being extracted with 50% acetonitrile or dichloromethane using an accelerated solvent extraction unit. The types of cyclic oligomers were classified into first and second series. The first series represented a type of [TG]n composed of terephthalic acid (TPA; T) and monoethylene glycol (EG; G) at a ratio of 1:1. The second series showed a type of [TG]nG in which a single G unit was substituted by diethylene glycol (DEG; GG). The oligomer level extracted using dichloromethane was measured at 4024–11576 mg kg^?1. The first series cyclic oligomers, second series cyclic oligomers and linear oligomers constituted 83.0–90.6%, 7.8–14.7% and 1.3–2.8%, of the total extracted oligomers, respectively. The extracted amounts of TPA, monohydroxyethyl terephthalate and bishydroxyethyl terephthalate using 50% acetonitrile were 3.0–28.2 mg kg^?1, 16.8–118.2 mg kg^?1 and 3.9–26.7 mg kg^?1, respectively. The A2, A3, S2 and S3 groups as modified oligomers were detected as 42.9–221.4 mg kg^?1, 17.2–250.3 mg kg^?1, 1.1–48.1 mg kg^?1 and 1.0–19.8 mg kg^?1, respectively. The results of this study demonstrate an advanced analytical approach to determine the residual oligomers and monomers in PET products for food use and imply their potential migration to foodstuffs.     

Separation of no-carrier-added radioactive scandium from neutron irradiated titanium

In this work, sorption of Ni(II) from aqueous solution to goethite as a function of various water quality parameters and temperature was investigated. The results indicated that the pseudo-second-order rate equation fitted the kinetic sorption well. The sorption of Ni(II) to goethite was strongly dependent on pH and ionic strength. A positive effect of HA/FA on Ni(II) sorption was found at pH < 8.0, whereas a negative effect was observed at pH > 8.0. The Langmuir, Freundlich, and D-R models were applied to simulate the sorption isotherms at three different temperatures of 293.15 K, 313.15 K and 333.15 K. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) were calculated from the temperature dependent sorption, and the results indicated that the sorption was endothermic and spontaneous. At low pH, the sorption of Ni(II) was dominated by outer-sphere surface complexation or ion exchange with Na⁺/H⁺ on goethite surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH.     

Electrochemical determination of rosiglitazone by square-wave adsorptive stripping voltammetry method

Square-wave adsorptive stripping voltammetry technique was used to determine rosiglitazone (ROS) on the hanging mercury dropping electrode (HMDE) surface, in Britton Robinson buffer, pH = 5. The voltammetric cathodic peak was observed at ?1520 mV vs. Ag/AgCl reference electrode. The voltammetric peak response was characterized with respect to pH, supporting electrolyte, accumulation potential, preconcentration time, scan rate, frequency, pulse amplitude, surface area of the working electrode and the convection rate. Under optimal conditions, the voltammetric current is proportional to the concentration of ROS over the concentration range of 5 × 10^?8–8 × 10^?7 mol l^?1 (r = 0.9899) with a detection limit of 3.2 × 10^?11 mol l^?1 using 120 s accumulation time. The developed SW-AdSV procedure showed a good reproducibility, the relative standard deviation RSD% (n = 10) at a concentration level of 5 × 10^?7 mol l^?1 was 0.33%, whereas the accuracy was 101% ± 1.0. The proposed method was successfully applied to assay the drug in the human urine and plasma samples with mean recoveries of 90 ± 0.71% and 86 ± 1.0%, respectively.     

Rapid Determination of Cichoric Acid by Argentation Complex Chromatography and Study on Related Mechanisms of Coordination Simultaneously Used in Rapid Determination of Salvianolic Acid B

Cichoric acid is a water-soluble phenolic acid in Echinacea purpurea and has a high medicinal value. A rapid and novel argentation complex liquid chromatography method has been developed and validated for determination of cichoric acid in E. purpurea extract. The determination of cichoric acid was carried out on a Restek Pinnacle 11 C18 column (250 mm × 4.6 mm, 5 μm), using acetonitrile-deionized water (38:62, v/v, with 6 mmol L^?1 AgNO₃ and 0.8% acetic acid) as the mobile phase at a flow rate of 1.0 mL min^?1 within 10 min. The wavelength was set at 326 nm. It improved the effect of determination by adding AgNO₃ in the mobile phase while cichoric acid coordinated with Ag⁺. The mechanism of coordination between cichoric acid and Ag⁺ has been studied by Fourier transform infrared spectroscopy, electrospray ionization mass spectrometry. The mechanism which improved the effect of determination of cichoric acid is analyzed and applied in the rapid determination of salvianolic acid B (Sal B) in Danshen extract solution which has been stored for half a year. The possible structures of the complex and complex ratio are all provided in this article. The experiments have facilitated the study of cichoric acid–Ag⁺ and Sal B–Ag⁺ complex and provide a theoretical basis for industrialized extraction of cichoric acid and Sal B in the future.     

Simultaneous Determination of Thallium and Lead on a Chemically Modified Electrode with Langmuir– Blodgett Film of a p‐tert‐Butylcalix[4]arene Derivative

A new voltammetric sensor, Langmuir–Blodgett (LB) film of a p‐tert‐butylcalix[4]arene derivative modified glassy carbon electrode, was designed and successfully used in simultaneous determination of Tl⁺ and Pb²⁺ by square‐wave anodic stripping voltammetry. Under the optimum experimental conditions, this newly developed sensor reveal good linear response for Tl⁺ and Pb²⁺ in the concentration range of 3×10^?8–4×10^?6 mol L^?1 and 2×10^?7–2×10^?5 mol L^?1 respectively. The detect limits are 2×10^?8 mol L^?1 for Tl⁺ and 8×10^?8 mol L^?1 for Pb²⁺. Using proposed method, Tl⁺ and Pb²⁺ in environment samples were determined with satisfactory results.     

Construction and characterization of nano iron complex ionophore for electrochemical determination of Fe(III) in pure and various real water samples

Electrochemical methods represent an important class of widely used techniques for the detection of metal ions. The unique chemical and physical properties of nanoparticles make them extremely suitable for designing new and improved sensing devices, especially electrochemical sensors and biosensors. This study focused on the synthesis of a nano‐Fe(III)–Sud complex and its characterization using various spectroscopic and analytical tools, optimized using the density functional theory method, screened for antibacterial activity and evaluated for possible binding to DNA using molecular docking study. Proceeding from the collected information, nano‐Fe(III)–Sud was used further for constructing carbon paste and screen‐printed ion‐selective electrodes. The proposed sensors were successfully applied for the determination of Fe(III) ions in various real and environmental water samples. Some texture analyses of the electrode surface were conducted using atomic force microscopy. At optimum values of various conditions, the proposed electrodes responded towards Fe(III) ions linearly in the range 2.5 × 10^?9–1 × 10^?2 and 1.0 × 10^?8–1 × 10^?2 M with slope of 19.73 ± 0.82 and 18.57 ± 0.32 mV decade^?1 of Fe(III) ion concentration and detection limit of 2.5 × 10^?9 and 1.0 × 10^?8 M for Fe(III)–Sud‐SPE (electrode I) and Fe(III)–Sud‐CPE (electrode II), respectively. The electrode response is independent of pH in the range 2.0–7.0 and 2.5–7.0, with a fast response time (4 and 7 s) at 25°C for electrode I and electrode II, respectively. Moreover, the electrodes also showed high selectivity and long lifetime (more than 6 and 3 months for electrode I and electrode II, respectively). The electrodes showed good selectivity for Fe(III) ions among a wide variety of metal ions. The results obtained compared well with those obtained using atomic absorption spectrometry.     

Spectral,kinetic, and redox properties of basic fuchsin in homogeneous aqueous and sodium dodecyl sulfate micellar media

Effect of anionic surfactant on the optical absorption spectra and redox reaction of basic fuchsin, a cationic dye, has been studied. Increase in the absorbance of the dye band at 546 nm with sodium dodecyl sulfate (SDS) is assigned to the incorporation of the dye in the surfactant micelles with critical micellar concentration (CMC) of 7.3 × 10^?3 mol dm^?3. At low surfactant concentration (<5 × 10^?3 mol dm^?3) decrease in the absorbance of the dye band at 546 nm is attributed to the formation of a dye–surfactant complex (1:1). The environment, in terms of dielectric constant, experienced by basic fuchsin inside the surfactant micelles has been estimated. The association constant (K_A) for the formation of dye–SDS complex and the binding constant (K_B) for the micellization of dye are determined. Stopped‐flow studies, in the premicellar region, indicated simultaneous depletion of dye absorption and formation of new band at 490 nm with a distinct isosbestic point at 520 nm and the rate constant for this region increased with increasing SDS concentration. The reaction of hydrated electron with the dye and the decay of the semireduced dye are observed to be slowed down in the presence of SDS. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 629–636, 2003     

Synthesis and application of treated activated carbon for cationic dye removal from modelled aqueous solution

Use of activated carbon (AC) prepared from rice husk and treated with anionic surfactant is investigated to eliminate cationic dye crystal violet (CV) using modelled dye solution. AC modified with anionic surfactant sodium lauryl sulfate (ACSLS) and other two surfactant namely sodium dodecyl sulfonate and hexadecyl trimethyl ammonium bromide were used for the analysis. Optimum ACSLS was analyzed and characterized using BET, XRD, SEM accompanied with XEDS, FTIR, HR-TEM and zeta potential, which confirms the sorption of CV onto ACSLS. Influence of pH, dose of adsorbent, concentration of initial dye, contact time, additive salts as well as actual water samples were investigated. Presence of NH⁴⁺, Ca²⁺, Mg²⁺, Na²⁺, Ca²⁺ and K⁺ cations in dye solution were having negligible (less than 4 %) influence on dye removal capacity. Study of mass transfer parameters revealed intra particle diffusion and film diffusion both played their part, whereas other kinetic studies has shown that experimental data fitted best with Pseudo 2nd order rate. Isotherm studies accompanied with error analysis revealed that Langmuir isotherm controls the adsorption equilibrium with highest capacity of CV adsorption with optimum operating conditions as pH = 6, temperature = 318 K, adsorbent dose = 100 mg/L and dye concentration = 30–60 mg/L. Study of thermodynamics and temperature analysis have shown that the sorption reaction was favourable and spontaneous with rise in temperature and endothermic in nature. Column studies are reported for varying rate of flow, depth of bed and dye concentrations along with analysis of column experimental data with various models like Yoon-Nelson, Thomas, Bohart-Adam and Clark model. Reusability (no. of cycles) of used adsorbent was studied using regeneration experiments. Analysis inferred that AC modified using surfactants can be a useful technique for enhanced adsorption capacity of dyes from aqueous solution and not much work has been reported on use of anionic surfactant modified AC for dye removal process.     

Mercury(II) Biosorption Using <Emphasis Type="Italic">Lessonia</Emphasis> sp. Kelp

Lessonia nigrescens and Lessonia trabeculata kelps have been tested for the sorption of mercury from aqueous solutions. A pretreatment (using CaCl₂) allowed stabilizing the biomass that was very efficient for removing Hg(II) at pH 6–7. Sorption isotherms were described by the Langmuir equation with sorption capacities close to 240–270 mg Hg g⁻¹ at pH 6. The temperature had a negligible effect on the distribution of the metal at equilibrium. The presence of chloride anions had a more marked limiting impact than sulfate and nitrate anions. The uptake kinetics were modeled using the pseudo-second-order equation that fitted better experimental data than the pseudo-first-order equation. The particle size hardly influenced sorption isotherms and uptake kinetics, indicating that sorption occurs in the whole mass of the biosorbent and that intraparticle mass transfer resistance was not the limiting rate. Varying the sorbent dosage and the initial metal concentration influenced the equilibrium, but the kinetic parameters were not drastically modified. Metal can be eluted with hydrochloric acid, citric acid, or acidic KI solutions.     

Hierarchically porous tobacco midrib-based biochar prepared by a simple dual-templating approach for highly efficient Rhodamine B removal

High volatile matter contents in the feedstock could promote the development of porous structures and the reactivity of biochar. Herein, tobacco midrib with high volatile matter contents was used to prepare biochar by a dual-templating approach with mild activators (K₂C₂O₄·H₂O, CaCO₃). The characterizations of textural properties indicated that tobacco midrib-based biochar possessed numerous meso-, micro-, and macro-pores, specific surface area reached 1841.9 m² g^?1. As a dye adsorbent, the adsorption capacity of this biochar towards Rhodamine B reached 588.7 mg g^?1. After recycling 5 times, it still retained over 90% of its initial adsorption capacity. Moreover, thermodynamic parameters assessed with full vańt Hoff equation confirmed that dye molecules replace water molecules connected on biochar surface during the adsorption according to negative heat capacity change (-3.9 kJ mol^?1 K^?1), ΔH⁰ (–22.1 kJ mol^?1) and ΔS⁰ (0.3 kJ mol^?1) revealed that the adsorption process of Rh B by TMB was exothermic and the disorder of the solid–liquid interface increased. Overall, this research provides a mild and effective approach to modifying biochar from special tissue of agriculture waste and an insight into the process of dye adsorption on biochar from thermodynamics.     

Mineralization of aqueous phenolate solutions: A combination of irradiation treatment and wet oxidation

Wet oxidation (high-temperature, high-pressure oxidation of organic wastes in aqueous solution) and radiation technology were combined in γ-ray and electron beam induced oxidation of 4×10^?4–1×10^?2 mol dm^?3 Na-phenolate solutions in a wide O₂ concentration (1–20 bar pressure) and absorbed dose (0–50 kGy) range. Most experiments were made in stainless steel high pressure autoclave equipped with magnetic stirrer. The rate of oxidation was followed by chemical oxygen demand and total organic carbon content measurements. The rate was similar in γ-ray and pulsed electron beam irradiation and increased with O₂ concentration in the liquid.     

Reply to comment on the possible role of the reaction H+H2O→H2+OH in the radiolysis of water at high temperatures

In reply to “Comment on the possible role of reaction H+H₂O→H₂+OH in the radiolysis of water at high temperatures” (Bartels, 2009 Comment on the possible role of the reaction H+H₂O→H₂+OH in the radiolysis of water at high temperatures. Radiat. Phys. Chem. 78, 191–194) we present an alternative thermodynamic estimation of the reaction rate constant k. Based on the non-symmetric standard state convention we have calculated that the Gibbs energy of reaction Δ_rG=57.26 kJ mol^?1 and the reaction rate constant k=7.23×10^?5 M^?1 s^?1 at ambient temperature. Re-analysis of the thermodynamic estimation (Bartels, 2009 Comment on the possible role of the reaction H+H₂O→H₂+OH in the radiolysis of water at high temperatures. Radiat. Phys. Chem. 78, 191–194) showed that the upper limit for the rate constant at 573 K is k=1.75×10⁴ M^?1 s^?1 compared to the value predicted by the diffusion-kinetic modelling (3.18±1.25)×10⁴ M^?1 s^?1 (Swiatla-Wojcik, D., Buxton, G.V., 2005. On the possible role of the reaction H+H₂O→H₂+OH in the radiolysis of water at high temperatures. Radiat. Phys. Chem. 74(3–4), 210–219). The presented thermodynamic evaluation of k(573) is based on the assumption that k can be calculated from Δ_rG and the rate constant of the reverse reaction which, as discussed, are both uncertain at high temperatures.     

Adsorption-reduction performance of tea waste and rice husk biochars for Cr(VI) elimination from wastewater

In the current study tea waste and rice husk biochars were used for the elimination of Cr(VI) from wastewater with the objectives to study the effect of pH (3–10), shaking time (0.016–24 h), sorbent dose (0.1–1.3 g L⁻¹) and initial concentration of Cr(VI) (10–250 mg L⁻¹). The Cr(VI) sorption was studied under various factors in which solution pH played a main role and at pH 5.2, maximum 99.3% and 96.8% Cr(VI) were removed by tea waste biochar (TWB) and rice husk biochar (RHB), respectively. In comparison, 197.5 mg g⁻¹ and 195.24 mg g⁻¹ Cr(VI) were sorbed by TWB and RHB, respectively with 120 mg L⁻¹ initial Cr(VI) concentration. In contact time study, after 2 h, equilibrium was achieved for both biochars which indicated that the Cr(VI) elimination from aqueous medium is a fast process. Kinetic and isotherm modeling data showed that pseudo-second order model and Langmuir (monolayer sorption) models provided the best fit for sorption of Cr(VI) onto both biochars. The –OH, COO– and –NH₂ functional groups were involved in the sorption of Cr(VI) onto biochars according to FTIR. Biochars produced from both biomass effectively removed Cr(VI) from polluted water, however in comparison sorption capacity of TWB was slightly higher than RHB. It was concluded that TWB and RHB could provide a cost-effective and viable option for elimination of Cr(VI) from wastewater.