One-dimensional Rhodium-nickel Alloy Assemblies with Nano-dendrite Subunits for Alkaline Methanol Oxidation

The noble metal rhodium(Rh)nanostructures have wide applications in catalysis and electrocataly-sis.In this work,a series of RhNi alloy nanostructures with diff...     

One-step in situ synthesis of NHx-adsorbed rhodium nanocrystals at liquid-liquid interfaces for possible electrocatalytic applications

Nearly monodisperse rhodium nanoparticles with adsorbed NH(x) were synthesized at the CCl(4)-water interface. The presence of NH(x)-adsorbed species was confirmed by energy-dispersive X-ray analysis (EDX) and X-ray photoelectron spectroscopy (XPS) studies. The synthesis of controlled size 2-38 nm rhodium particles was studied as a function of reducing agent concentration by transmission electron microscopy (TEM). HRTEM confirmed the formation of rhodium nanoparticles having fringe spacing consistent with reported Rh (111) planes. The continuity of these films over an area of 1×1 μm was revealed by atomic force microscopy (AFM) studies. The electrocatalytic application of these nanostructure Rh-NH(x) thin films for formaldehyde oxidation in 0.5M NaOH was investigated by cyclic voltammetry. The Rh nanoparticles formed by the present strategy are expected to be useful for other catalytic applications also.     

N2流量对GaN的形貌及光学和电学性能的影响

采用化学气相沉积法(CVD)在Si(100)衬底上以Ni为催化剂, 金属Ga和NH₃为原料合成了GaN微纳米结构, 并研究了N₂流量对产物GaN的形貌及光学和电学性能的影响。利用场发射扫描电子显微镜(SEM)、透射电镜(TEM)、X射线衍射仪(XRD)、X-ray能谱仪(EDS)、光致发光谱(PL)和霍尔效应测试仪(HMS-3000)等测试手段对样品的形貌、结构、成分、光学和电学性能进行了分析。结果表明, 随着N₂流量的增加, 产物GaN的形貌发生了由微米棒到蠕虫状线再到光滑纳米线的转变;生成的GaN均为六方纤锌矿结构;样品均表现出383 nm的近带边紫外发射峰和470 nm左右的蓝光发射峰;所有样品均为n型;并对产物GaN的形貌转变机理进行了分析。     

Silsesquioxyl rhodium(I) complexes--synthesis, structure and catalytic activity

The first bi- and mononuclear rhodium(I) complexes [{Rh(μ-OSi(8)O(12)(i-Bu)(7))(cod)}(2)] (5), [Rh(cod)(PCy(3))(OSi(8)O(12)(i-Bu)(7))] (6) with a hindered hepta(iso-butyl)silsesquioxyl ligand bonded to the rhodium(I) center through Rh-O-Si bonds have been synthesized and their structures have been solved by spectroscopic methods and X-ray analysis. Their exemplary catalytic properties in silylative coupling of vinylsilanes with styrene are also presented.     

A new atropisomeric P,N ligand for rhodium-catalyzed asymmetric hydroboration

A new optically active and large dihedral angle atropisomeric P,N ligand, pyphos, which contains a tertiary phosphine and pyridine moiety, was prepared and resolved through diastereomeric complexation with chiral palladium amine complexes. The hexafluorophosphate salt of the diastereomers were found to be separable by fractional recyrstallization, while the corresponding chloride salt did not. [Rh(COD)pyphos]PF(6) complex was synthesized by metalation of pyphos with [Rh(COD)Cl](2) followed by anion exchange with NH(4)PF(6) in excellent yield, and the target rhodium complex was characterized by single-crystal X-ray crystallography. The chiral cationic rhodium complex was utilized in the enantioselective hydroboration of vinylarenes. Excellent regioselectivity and good enantioselectivity were observed, and the ee values were found to be dependent on the electronic properties of para-substituted styrenes.     

Direct observation of beta-aryl eliminations from Rh(I) alkoxides

beta-Aryl eliminations from a series of rhodium(I) alkoxides to form rhodium aryl complexes and free ketones are reported. Tertiary phenylmethoxide complexes [Rh(PEt3)n(OCPhRR')] (n = 2, 3) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2} by the corresponding alcohols HOCPhRR' in the presence and absence of added PEt3. Heating of these complexes in the presence of added PEt3 generated the rhodium phenyl complex, (PEt3)3RhPh, and the corresponding ketones in good to high yields. Kinetic results are most consistent with irreversible beta-phenyl elimination from a bisphosphine-ligated rhodium alkoxide complex. Such bisphosphine complexes result from ligand dissociation from the trisphosphine complexes and have been isolated in some cases. The bisphosphine complexes are stabilized by Rh-Cphenyl interactions, as evidenced by an X-ray structure, and this structure with a metal-aryl interaction likely illustrates the pathway for C-C bond cleavage.     

Large-Amplitude Thermal Vibration-Coupled Valence Tautomeric Transition Observed in a Conductive One-Dimensional Rhodium–Dioxolene Complex

The exploration of dynamic molecular crystals is a fascinating theme for materials scientists owing to their fundamental science and potential application to molecular devices. Herein, a one-dimensional (1D) rhodium-dioxolene complex is reported that exhibits drastic changes in properties with the phase transition. X-ray photoelectron spectroscopy (XPS) revealed that the room-temperature (RT) phase is in a mixed-valence state, and therefore, the drastic changes originate from the mixed-valence state appearing in the RT phase. Another notable feature is that the mean square displacements of the rhodium atoms along the 1D chain dramatically increased in the RT phase, indicating a large-amplitude vibration of the Rh−Rh bonds. From these results, a possible mechanism for the appearance of the mixed-valence state in the RT phase was proposed based on the thermal electron transfer from the 1D d-band to the semiquinonato π* orbital coupled with the large-amplitude vibration of the Rh−Rh bonds.     

Topography changes of rhodium electrodes induced by the application of fast periodic potential routines

The surface structure of polycrystalline rhodium electrodes in contact with aqueous sulfuric acid was modified by chemical etching with hot concentrated acid or by applying fast square waves with an upper potential equal to 1.55 V and a lower potential within the –0.75 V to –0.35 V range. Polycrystalline rhodium and chemical etched electrodes were characterized by voltammetry, Cu underpotential deposition (upd) and X-ray diffraction. For electrofaceted surfaces were used voltammetry, Cu upd and SEM, revealing that two modified rhodium electrodes exhibit similar voltammetric characteristics as those found for Rh(111) and Rh(110) single crystals, and a third surface with an equal distribution of (110) and (111) planes. In addition, the upd of Cu on those surfaces corroborated the existence of those crystallographic planes. SEM micrographs show surface structures with a high density of terraces and steps. A mechanism of faceting is proposed. Electronic Publication     

Rhodium dimers with 2,2-dimethyl-1,3-diisocyano and bis(diphenylphosphino)methane bridging ligands

Four rhodium dimers have been synthesized with a bridging diisocyanide ligand, dmb (2,2-dimethyl-1,3-diisocyanopropane): [Rh2(dmb)4](BPh4)2, [Rh2(dmb)4Cl2]Cl2, [Rh2(dmb)4I2](PF6)2, and [Rh2(dmb)2(dppm)2](BPh4)2 (dppm = bis(diphenylphosphino)methane). The complexes have been characterized by elemental analysis and mass spectrometry, as well as UV-visible, IR, and 1H NMR spectroscopies. X-ray crystal structures of the rhodium(I) complexes, [Rh2(dmb)4](BPh4)2 . 1.5CH3CN (3.2330(4), 3.2265(4) A) and [Rh2(dmb)2(dppm)2](BPh4)2.0.5CH3OH . 0.2H2O (3.0371(5) A), confirm the existence of short Rh...Rh interactions. The metal-metal separation for the rhodium(II) adduct, [Rh(2)(dmb)4Cl2]Cl2.6CHCl3 (2.8465(6) A), is consistent with a formal Rh-Rh bond. For the two luminescent rhodium(I) dimers and six previously investigated diisocyano-bridged dimers with and without dppm ligands, the intense spin-allowed dsigma-->psigma absorption band maximum shifts to longer wavelengths with decreasing Rh...Rh separation, and there is an approximate correlation between band energy and the inverse of the metal-metal separation cubed. Both [Rh2(dmb)4]2+ and [Rh2(dmb)4(dppm)2]2+ undergo oxidative addition in the presence of iodine. In the conversion of [Rh2(dmb)4]2+ to [Rh2(dmb)4I2]2+, the observed intermediate is tentatively assigned to a tetramer composed of two rhodium dimers. In the case of [Rh2(dmb)2(dppm)2]2+, no intermediate was detected.     

RhCl3-assisted C-H and C-S bond scissions: isomeric self-association of organorhodium(iii) thiolato complex. synthesis, structure, and electrochemistry

The ligating properties of alkyl 2-(phenylazo)phenyl thioether 1 (HL(R); R = Me, CH(2)Ph) toward Rh(III) have been examined. A novel hexacoordinated orthometalated rhodium(III) thiolato complex trans-[Rh(L)Cl(PPh3)2] 5 has been synthesized from 1 and RhCl(3).3H(2)O in the presence of excess PPh(3) via in situ C(sp(2))-H and C(sp(3))-S bond scissions, which is the first example for a coordination compound of [L](2-). We were also able to isolate the intermediate organothioether rhodium(III) compound trans-[Rh(L(R))Cl(2)(PPh(3))] 6 with 1 equiv of PPh(3) relative to both 1 and RhCl(3).3H2O in the course of the synthesis of the S-dealkylated product. PPh(3) plays a crucial role in the C(sp(3))-S cleavage process. A plausible mechanistic pathway is presented for C-S bond cleavage, and reductive cleavage by single-electron transfer mechanism is likely to be operative. The electronically and coordinatively saturated thiolato complex 5, indefinitely stable in the solid state, undergoes spontaneous self-dimerization in solution via dissociation of one coordinated PPh3 molecule to afford edge-shared bioctahedral anti-[Rh(L)Cl(PPh(3))]2 7 and syn-[Rh(L)Cl(PPh(3))]2 8 isomers. All the synthesized organosulfur rhodium(III) compounds were isolated as both air- and moisture-stable solids and spectroscopically characterized in both solution and solid states. In addition, all the representative members have been authenticated by single-crystal X-ray structure analyses. Availability of the isomeric dimers provides an opportunity to recognize the presence of noncovalent intramolecular "metallochelate-metallochelate" interaction in the sterically encumbered syn isomer. Unlike other organosulfur rhodium complexes, the monomeric thiolato complex 5 exhibits a fully reversible oxidative wave at 0.82 V vs Ag/AgCl, which is supposed to be primarily centered on the thiolato sulfur atom, and such perception is consistent with the DFT study. Formation of rhodium-bound thiyl radical cation 5(*+) by electrochemical oxidation was scrutinized by EPR spectroscopy.     

Luminescent cyclometalated Rh(III), Ir(III), and (DIP)2Ru(II) complexes with carboxylated bipyridyl ligands: synthesis, X-ray molecular structure, and photophysical properties

Luminescent cyclometalated rhodium(III) and iridium(III) complexes of the general formula [M(ppy) 2(N (wedge)N)][PF 6], with N (wedge)N = Hcmbpy = 4-carboxy-4'-methyl-2,2'-bipyridine and M = Rh ( 1), Ir ( 2) and N (wedge)N = H 2dcbpy = 4,4'-dicarboxy-2,2'-bipyridine and M = Rh ( 3), Ir ( 4), were prepared in high yields and fully characterized. The X-ray molecular structure of the monocarboxylic iridium complex [Ir(ppy) 2(Hcmbpy)][PF 6] ( 2) was also determined. The photophysical properties of these compounds were studied and showed that the photoluminescence of rhodium complexes 1 and 3 and iridium complexes 2 and 4 originates from intraligand charge-transfer (ILCT) and metal-to-ligand charge-transfer/ligand-centered MLCT/LC excited states, respectively. For comparison purposes, the mono- and dicarboxylic acid ruthenium complexes [Ru(DIP) 2(Hcmbpy)][Cl] 2 ( 5) and [Ru(DIP) 2(H 2dcbpy)][Cl] 2 ( 6), where DIP = 4,7-diphenyl-1,10-phenanthroline, were also prepared, whose emission is MLCT in nature. Comparison of the photophysical behavior of these rhodium(III), iridium(III), and ruthenium(II) complexes reveals the influence of the carboxylic groups that affect in different ways the ILCT, MLCT, and LC states.     

Asymmetric 1,4-addition of alkenylzirconium reagents to α,β-unsaturated ketones catalyzed by chiral rhodium complexes

Highly enantioselective 1,4-addition of alkenylzirconocene chlorides to α,β-enones was found to be catalyzed by a chiral rhodium complex generated from [Rh(cod)(MeCN)₂]BF₄ and (S)-BINAP. The reaction can be applied to either cyclic or acyclic enones and the optical yield was up to 99% ee. The reaction mechanism would involve the transmetalation between the alkenylzirconocene chloride and the rhodium complex to give the alkenylrhodium species as a key intermediate.     

Metal and Metal Oxide Nanostructures Prepared by Electrical Arc Discharge Method in Liquids

In this review, the importance of electrical arc discharge technique in liquids in synthesis of various nanostructures from carbon based materials to metal and metal oxide nanostructures with their general and specific properties, especially the photocatalytic performance of metal oxide nanostructures is studied. The effect of arc current on size distribution, morphology and physicochemical properties of metal and semiconductor nanostructures was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray photoelectron spectroscopy (XPS) and UV–Vis spectroscopy. WO₃ Cubic nanostructures with 30 nm mean particle size were formed during the discharge process in water. Discharge between zinc electrodes in water leads to formation of rod like and semi spherical ZnO nanostructures with 15–20 nm diameter range. ZrO₂ nanoparticles were formed using zirconium electrodes in water. Photodegradation of Rhodamine B (Rh. B) shows that the as prepared nanostructures in this method have potential ability for environmental purifications. Also, using silver electrodes in water leads to formation of silver nanoparticles with 8–15 nm average particle size. Moreover, a novel method for synthesis of gold nanoparticles without using gold electrodes is presented. Finally, the future outlook of this technique in synthesis of various nanocrystalline materials is presented.     

A mechanistic investigation into the elimination of phosphonium salts from rhodium-TRIPHOS complexes under methanol carbonylation conditions

Phosphine modified rhodium complexes are currently the topic of considerable research as methanol carbonylation catalysts, but often suffer from poor stability. This paper reports on an investigation into how coordination mode affects the elimination of phosphonium salts from rhodium complexes, namely [trans-RhCl(CO)(PPh(3))(2)] , [RhCl(CO)(dppe)] , [RhCl(CO)(dppb)](2), [Rh(TRIPHOS)(CO)(2)]Cl . These complexes are all potential pre-catalysts for methanol carbonylation. The reaction of these complexes with methyl iodide at 140 degrees C under both N(2) and CO atmospheres has been studied and has revealed clear differences in the stability of the corresponding Rh(iii) complexes. In contrast to both monomeric and dimeric that react cleanly with CH(3)I to give stable Rh(iii) acetyl complexes, forms a novel bidentate complex after the elimination of the one arm of the ligand as a quaternised phosphonium salt. The structure of this complex has been determined spectroscopically and using X-ray crystallography. The mechanism of formation of this novel complex has been investigated using (13)CH(3)I and strong evidence that supports a dissociative mechanism as the means of phosphine loss from the rhodium centre is provided.     

反应条件对固相合成负载羰基铑原子簇催化剂及其性能的影响

本文报告了由金属盐直接固相合成负载铑络合物或原子簇催化剂的新方法及IR谱表征。CO容易使表面吸附有水分子的RhCl_3/SiO_2还原并生成表面羰基物Rh~+-(CO)_2/SiO_2;CO、CO/H_2和CO/2H_2等不同还原气对表面络合物的生成没有影响。采用H_2还原只能得到金属Rh催化剂。水是重要影响因素,如果RhCl_3/SiO_2先抽空脱水,再用含水的CO还原,就会使Rh~+(CO)_2/SiO_2转化为Rh_6(CO)_(16)/SiO_2。此外,还考察了负载原子簇的CO加氢和热分解反应性能。采用CO还原RhCl_3/SiO_2制备的催化剂同负载原子簇催化剂的反应行为非常相近,而且比传统催化剂具有更高的反应活性。     

Rhodium assisted C-H activation of benzaldehyde thiosemicarbazones and their oxidation via activation of molecular oxygen

The benzaldehyde thiosemicarbazones are found to undergo oxidation at the sulfur center upon reaction with [Rh(PPh3)3Cl] in refluxing ethanol in the presence of a base (NEt3). A group of organorhodium complexes are obtained from such reactions, in which the oxidized thiosemicarbazones are coordinated to rhodium as tridentate CNS donors, along with two triphenylphosphines and a hydride. From the reaction with para-nitrobenzaldehyde thiosemicarbazone, a second organometallic complex is obtained, in which the thiosemicarbazone is coordinated to rhodium as a tridentate CNS donor, along with two triphenylphosphines and a hydride. Reaction of the benzaldehyde thiosemicarbazones with [Rh(PPh3)3Cl] in refluxing ethanol in the absence of NEt3 affords another group of organorhodium complexes, in which the thiosemicarbazones are coordinated to rhodium as tridentate CNS donors, along with two triphenylphosphines and a chloride. Structures of representative complexes of each type of complexes have been determined by X-ray crystallography. In all of the complexes, the two PPh3 ligands are trans. All of the complexes show intense MLCT transitions in the visible region. Cyclic voltammetry on these complexes shows a Rh(III)-Rh(IV) oxidation on the positive side of SCE. Redox responses of the coordinated thiosemicarbazones are also displayed by all of the complexes.     

N-heterocyclic carbene complexes of Rh: reaction with dioxygen without oxidation

The reaction of oxygen with rhodium complexes containing N-heterocyclic carbenes was found to give dioxygen complexes with rare square planar geometries and unusually short O-O bond lengths. Analysis of the bonding in these complexes by Rh L-edge X-ray absorption spectroscopy (XAS), Raman spectroscopy, and DFT calculations provides evidence for a bonding model in which singlet oxygen is bound to a Rh(I) d8 metal complex, rather than the more common Rh(III) d6 peroxo species with octahedral geometry and O-O bond lengths in the 1.4-1.5 A range.     

Synthesis and X-ray crystal structure of a cationic homoleptic (SPS)2Rh(III) complex and EPR study of its reduction process

Oxidation of the square planar Rh(I) complex [Rh(SPS(Me))(PPh3)] (SPS(Me) = 1-methyl-1-P-2.6-bis(diphenylphosphinosulfide)-3,5-(bisphenyl)-phosphinine) (1) based on mixed SPS-pincer ligand with hexachloroethane yielded the Rh(III) dichloride complex [Rh(SPS(Me))(PPh3)Cl2] (2), which was structurally characterized. The homoleptic Rh(III) complex [Rh(SPS(Me))2][Cl] (4) was obtained via the stoichiometric reaction of SPS(Me) anion (3) with [Rh(tht)3Cl3] (tht = tetrahydrothiophene). Complex 4, which was characterized by X-ray diffraction, was also studied by cyclic voltammetry. Complex 4 can be reversibly reduced at E = -1.16 V (vs SCE) to give the neutral 19-electron Rh(II) complex [Rh(SPS(Me))2] (5). Accordingly, complex 5 could be synthesized via chemical reduction of 4 with zinc dust. EPR spectra of complex 5 were obtained after electrochemical or chemical reduction of 4 in THF or CH2Cl2. Hyperfine interaction with two equivalent 31P nuclei was observed in liquid solution, while an additional coupling with a spin 1/2 nucleus, probably 103Rh, was detected in frozen solution. The 31P couplings are consistent with DFT calculations that predict a drastic increase in the axial P-S bond lengths when reducing (SPS(Me))2Rh(III). In the reduced complex, the unpaired electron is mainly localized in a rhodium d(z2) orbital, consistent with the g-anisotropy measured at 100 K.     

Overgrowth of Rhodium on Gold Nanorods

This study focuses on the deposition and growth mode of rhodium (Rh) on gold (Au) seed nanorods (NRs). Using a combination of scanning transmission electron microscopy imaging, energy-dispersive X-ray spectroscopy, and UV-visible absorption spectroscopy, we show that Rh deposition results in an uneven overlayer morphology on the Au NR seeds, with a tendency for Rh deposition to occur preferentially on the Au NR ends. The results suggest that complex and kinetically driven metal-metal interactions take place in this system.     

Preparation,characterization, and hydrogenation activity of new Rh0–MCM-41 catalysts prepared from as-synthesized MCM-41 and RhCl3

Impregnation of as-synthesized MCM-41 silica by ethanolic solutions of rhodium(III) chloride was tested as an alternative to its introduction into the synthesis gel to get, after calcination and reduction by H₂, highly dispersed metal(0) nanoparticles throughout the mesopores network. Rh(III) and Rh(0)–based solids thus obtained were analyzed by infrared spectroscopy, elemental analysis, transmission electron microscopy, N₂ sorption, and X-ray diffraction. Materials with 1.6 wt % of rhodium could be obtained as a result of CTA⁺/Rh³⁺ exchange. The determining role of CTA⁺ was emphasized through blank experiments. In a second series of materials, ethanol was also exploited for its ability to reduce Rh(III). All Rh(0)-based solids were tested as catalysts in the hydrogenation of styrene under mild temperature and pressure conditions. Catalysis performances of the most efficient sample (reduced by H₂) were further compared with those of a very similar material prepared by the introduction of Rh(III) directly into the synthesis gel of MCM-41 silica. Better cis selectivities in the hydrogenation of disubstituted arene derivatives were achieved with materials issued from the new preparation method.