CO_(2)加氢制甲酸理论研究及高效铁基催化剂设计北大核心CSCD

CO_(2)加氢制甲酸由于需同时活化惰性氢气及CO_(2)而富有挑战性,同时此过程原子经济性100%,具有很好的理论和现实研究价值,但文献中报道的活性较好的催化剂均为贵金属催化剂.为了开发活性更高的用于CO_(2)加氢制甲酸的铁基催化剂,我们采用理论计算方法研究了12种不同种类的PNP-Fe(PNP=2,6-(二-叔丁基-磷甲基)吡啶)化合物催化CO_(2)加氢制甲酸的过程.理论研究结果表明,CO_(2)加氢制甲酸反应过程包括H2活化及CO_(2)插入金属氢键两个步骤,H_(2)活化过程是整个反应的速控步骤.催化剂吡啶环上进行P原子取代可以显著降低H_(2)活化能垒.基于以上发现,我们设计了一种新颖的高效铁基催化剂,使用此催化剂催化CO_(2)加氢制甲酸反应,速控步骤能垒只有85.6 kJ/mol,催化活性与贵金属的比较接近.我们研究的12种铁基催化剂速控步骤能垒范围为85.6~126.4 kJ/mol,显示了配体良好的调控催化活性能力.     

A novel liquid system of catalytic hydrogenation

On the basis that endothermic aqueous-phase reforming of oxygenated hydrocarbons for H2 produc- tion and exothermic liquid phase hydrogenation of organic compounds are carried out under extremely close conditions of temperature and pressure over the same type of catalyst, a novel liquid system of catalytic hydrogenation has been proposed, in which hydrogen produced from aqueous-phase re- forming of oxygenated hydrocarbons is in situ used for liquid phase hydrogenation of organic com- pounds. The usage of active hydrogen generated from aqueous-phase reforming of oxygenated hy- drocarbons for liquid catalytic hydrogenation of organic compounds could lead to increasing the se- lectivity to H2 in the aqueous-phase reforming due to the prompt removal of hydrogen on the active centers of the catalyst. Meanwhile, this novel liquid system of catalytic hydrogenation might be a po- tential method to improve the selectivity to the desired product in liquid phase catalytic hydrogenation of organic compounds. On the other hand, for this novel liquid system of catalytic hydrogenation, some special facilities for H2 generation, storage and transportation in traditional liquid phase hydrogenation industry process are yet not needed. Thus, it would simplify the working process of liquid phase hy- drogenation and increase the energy usage and hydrogen productivity.     

CO2／H2和（CO／CO2）＋H2低压合成甲醇催化过程的本质

通过在Ｃｕ／ＺｎＯ／Ａｌ２Ｏ３催化剂上ＣＯ２＋Ｈ２，ＣＯ＋Ｈ２和（ＣＯ／ＣＯ２）＋Ｈ２催化反应动力学研究对合成甲醇动力学和反应机理进行了细致分析，提出合成甲醇的反应机理，解释了在（ＣＯ／ＣＯ２）＋Ｈ２合成甲醇过程中少量ＣＯ２的作用及合成甲醇的直接碳源。     

Energy-efficient syngas production through catalytic oxy-methane reforming reactions

The considerable recent interest in the conversion of stranded methane into transportable liquids as well as fuel cell technology has provided a renewed impetus to the development of efficient processes for the generation of syngas. The production of syngas (CO/H2), a very versatile intermediate, can be the most expensive step in the conversion of methane to value-added liquid fuels. The catalytic oxy reforming of methane, which is an energy-efficient process that can produce syngas at extremely high space-time yields, is discussed in this Review. As long-term catalyst performance is crucial for the wide-scale commercialization of this process, catalyst-related studies are abundant. Correspondingly, herein, emphasis is placed on discussing the different issues related to the development of catalysts for oxy reforming. Important aspects of related processes such as catalytic oxy-steam, oxy-CO2, and oxy-steam-CO2 processes will also be discussed.     

流化床中 CH4/C3H8 自热重整制合成气

 在流化床反应器中, 考察了 Ni/SiO2 催化剂上 CH4 或 CH4-C3H8 临氧 CO2 重整 (自热重整) 制合成气反应性能. 结果表明, 在 CH4-C3H8 混合气自热重整反应中, Ni 粒径较小催化剂的活性和抗积炭性能较高, CH4 和 CO2 转化率分别达 75.5% 和 72.6%. C3H8 比 CH4 更易解离及被氧化, 部分 C3H8 解离出来的中间产物 CHx 物种可与吸附 H 结合为 CH4, 因而降低了 CH4 的表观转化率; CHx 也可与吸附的 CO2 物种反应生成 H2 与 CO, 从而促进了 CO2 的转化.     

高分散Ru/FeOx催化剂在二氧化碳选择加氢反应中的应用及其催化活性的调控

由于化石能源的大量开采和利用造成CO2过度排放,从而导致严重的温室效应和气候环境问题,给人类生存带来极大威胁.CO2选择加氢反应可以将CO2催化加氢生成高附加值的CO产物.与其他的CO2转化反应策略相比,该过程中H2的消耗更少,成为可有效处理及转化CO2的手段之一.同时,应尽可能抑制CO2深度加氢以及甲烷的产生,研制及设计具有高CO选择性的新型高效催化剂及其构效关系的分析仍十分重要.据报道,负载型贵金属基催化剂的使用有利于H2分子的活化,具有优异的催化活性,因而广泛应用于多种催化反应中.然而,贵金属催化剂实现工业应用的最大挑战是资源的限制及其高额的成本.近年来,由贵金属制备的负载型亚纳米团簇受到广泛关注,主要包括如Au,Pt,Pd,Ru等贵金属,可有效应用于多相催化反应.人们还致力于提高负载型亚纳米团簇的分散度,促进催化剂活性位点的有效暴露,有利于大幅度提高催化剂的有效利用率.本文采用共沉淀法成功制备了超高分散的负载型Ru基催化剂,通过CO2选择加氢-程序升温表面反应(TPSR)和质谱联用技术测试了催化剂性能,发现CO2加氢反应生成CO选择性达100%.采用XRD,BET和TEM等方法对催化剂结构进行表征,并结合H2-TPR,H2-TPD和XPS等表征结果深入探讨了催化剂构效关系,并提出了针对该催化剂体系较为合理的反应模型.在CO2选择加氢反应的催化性能测试中,2.50%Ru/FeOx催化剂对目标产物CO选择性仅为41%; 随着Ru负载量降低至0.25%和0.1%时,CO选择性明显提高至80%; 当进一步降低Ru含量至0.01%时,CO选择性接近100%,且表现出优异的反应速率.在360 oC时,0.01%Ru/FeOx催化剂的相对反应速率为7.71 molCO2molRu-1 min-1,是2.50%Ru/FeOx催化剂相对反应速率的154倍.H2-TPR结果表明,贵金属Ru可以明显促进载体FeOx的还原,并产生丰富的氧空位,进而促进CO2的吸附、活化.而且CO2选择加氢TPSR结果显示,目标产物CO的起始生成温度总是滞后于原料H2的初始活化温度,与H2-TPR结果及文献报道的CO2选择加氢反应机理一致.通过H2-TPD深入理解H2在催化剂表面的活化和氢溢流现象,以及Hads与不同催化剂之间的相互作用力,0.01%Ru/FeOx催化剂相对较高的H2脱附峰温度表明,该样品中Ru与Hads具有极强的相互作用力,相对抑制了Hads与COads深入加氢生成CH4,从而提高了CO选择性,而2.50%Ru/FeOx催化剂的情况则与此相反.本文提出了从Hads吸附作用力强弱来考虑CO2选择加氢反应选择性的新思路,同时为设计CO2选择加氢制高附加值CO的高催化反应速率、高CO选择性的高分散Ru基催化剂提供了一种经济简易的催化剂设计思路.     

Synthesis of Dimethyl Ether from CO Hydrogenation： a Thermodynamic Analysis of the Influence of Water Gas Shift Reaction

Three reactions involved in dimethyl ether (DME) synthesis from CO hydrogenation: methanol synthesis reaction (MSR), methanol dehydration reaction (MDR) and water gas shift reaction (WGSR) are studied by thermodynamic calculation. For demonstrating this process in detail, three models, MSR,MSR MDR, MSR MDR WGSR, are used. Their basic characteristics can be obtained by varying widely the ratios of H2 to CO in the feed (no CO2). Through thermodynamic analysis a chemical synergic effect obviously exists in the second and third models. By comparison between two models it is found that WGSR plays a special role in dimethyl ether synthesis. It is possible for the two models to shift one to the other by regulating CO2 concentration in feed. For Model 2, the selectivity for DME in oxygenates (DME methanol) does not change with the ratio of H2 to CO.     

CO2 hydrogenation on a metal hydride surface

The catalytic hydrogenation of CO(2) at the surface of a metal hydride and the corresponding surface segregation were investigated. The surface processes on Mg(2)NiH(4) were analyzed by in situ X-ray photoelectron spectroscopy (XPS) combined with thermal desorption spectroscopy (TDS) and mass spectrometry (MS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). CO(2) hydrogenation on the hydride surface during hydrogen desorption was analyzed by catalytic activity measurement with a flow reactor, a gas chromatograph (GC) and MS. We conclude that for the CO(2) methanation reaction, the dissociation of H(2) molecules at the surface is not the rate controlling step but the dissociative adsorption of CO(2) molecules on the hydride surface.     

Fe—Silicalite—2催化剂表面CO2加氢反应性能的研究

研究了Ｆｅ／Ｓｉｌｉｃａｌｉｔｅ－２催化剂ＣＯ２加氢低碳烯烃反应性能，利用ＣＯ２－ＴＰＤ，ＣＯ２／Ｈ２－ＴＰＳＲ和ＣＯ／Ｈ２－ＴＰＳＲ表征手段，考察了铁含量及ＭｎＯ助剂对Ｆｅ／Ｓｉｌｉｃａｌｉｔｅ－２催化剂ＣＯ２吸附脱附及加氢反应性能的影响，表明随铁含量增加可提高催化剂对ＣＯ２的吸附能力，有利于提高ＣＯ２加氢反应的转化率。     

ZnO纳米线负载Pd1单原子催化剂催化若干反应性能的考察

将孤立的Pd原子分散到ZnO纳米线(NWs)上作为单原子催化剂(SACs),并考察了它们在若干反应中的催化性能.Pd1/ZnO SAC对甲醇蒸汽重整制氢反应表现出高的活性、稳定性和CO2选择性.该催化剂体系对CO和H2的氧化也具有高活性,但在富氢物料中CO优先氧化反应中的催化剂性能较差,这主要是由于在ZnO负载的Pd1原子上H2氧化的强竞争反应所致.常压下在Pd1/ZnO SAC上就可发生逆水汽变换反应.该系列催化反应测试结果清楚地表明,选择合适金属与载体对开发分子催化转化用单原子催化剂至关重要.